Webcenter Installation Linux : domain config : not giving suite components
I have downloaded the webcenter suite with UCM ( under additional components ) and installed on linux, everything ran properly, Webcenter suite installed with proper success message and UCM also but when I am running the configuration wizard to create WCS domain it's not giving me the WC suite applications as expected normally, it's just giving me the prompts as normally we get during weblogic domain configuration, Does anybody have same kind of experience and reason ?
my apologies. I was using the weblogic version prior to 10.x with WCS 11g.
Similar Messages
-
Eclipse plugin, 'Domain "mydomain" not found in directory : .\config'
Hello
My configuration is windows 2000 workstation with eclipse 2.1, j2sdk1.4.2 and
1.3.1 (the one installed with WLS 6.1 SP5) and WLS 6.1 SP5
I have installer the weblogic plugin for eclipse
my BEA Home is D:\bea
my domain name is babarland
my domain directory is D:\bea\wlserver6.1\config\babarland
my service name is babar
my user is system
When I try to start wls, I have the error below. I don't understand why it don't
use the parameters I set ine the configuration window.
Error:
<15 sept. 03 23:05:29 CEST> <Warning> <Management> <.\config\mydomain not found.>
Searched : 1
The WebLogic Server did not start up properly.
Exception raised:
weblogic.management.configuration.ConfigurationException: Domain "mydomain" not
found in directory : .\config
at weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileRepository.java:226)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:374)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy1.loadDomain(Unknown Source)
at weblogic.management.AdminServer.configureFromRepository(AdminServer.java:188)
at weblogic.management.AdminServer.configure(AdminServer.java:173)
at weblogic.management.Admin.initialize(Admin.java:257)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:368)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:213)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
If someone know why, it could greatly help me
Thank youI'm facing the same problem, has someone any idea to fix the problem.
Thanks in advance for any help. -
I am trying to finish the installation of Reader from Adobe Creative Suite 5.5 Design Premium and it will not let me proceed because it says "Please close the following applications to continue. Google Chrome.exe" , I don't have any Chrome applications open and I have even gone to Add/Remove Programs and removed Chrome from my PC. Still get error. Any advice?
ctrl-alt-del > start task manager > processes
-
For SCOM monitoring and user permissions I am trying to add the Action Account from HQ.local domain to some other domains like DOMAIN1.local, TEST1.local and TEST2.local.
(a trust persists between the domains en HQ.local, and DNS Conditional forwarders are configured to correctly resolve the FQDN DNS names).
Problem is, when adding a user from the HQ.local domain to the Active Directory of the DC's SRVPDC01.DOMAIN1.local or SRVPDC01.TEST1.local domain I get an error:
"The Active Directory Domain Controllers Required to find the selected objects in the following domains are not available:
HQ.local
Ensure the Active Directory Domain Controllers are available, and try to select the objects again."
But when I try to do the same thing, so add user1 from HQ.local to the AD on TESTDC01.TEST2.local…. No error!
The other way around, like adding users from DOMAIN1.local, TEST1.local or TEST2.local to the DC01.HQ.local Active directory… also no error!
To make things even more strange, when I validate the trust with HQ.local… and then try to add user1.HQ.local -> No problem, but only for about 1 minute.. After that
it doesn't recognize user1.HQ.local and only displays some CN=S-1-5... ID of the user. Also when trying to add a new user, I receive the error again.
My guess is that the problem has something to do with the same NETBIOS names of the DC's (server 3 and 4). because authenticating users from HQ.local and TEST2.local
doesn't give me errors and all other domains which have same DC names are giving errors.
(for testing purposes I set-up TESTDC01.TEST2.local with a different DC servername to see if the error persists, and it didn't).
Overview of the servers and situation:
- All server 3, 4 and 5 are on separate Vlan's and have no connectivity among each other. But they do have connectivity to the internet, the HQ.local domain and its servers
DC01 and DC02.
- same firewall settings for each vlan
- even Server 4 and server 5 are on the same Vlan for testing purposes, just to make sure the firewall is not the problem.
Server no.
DC FQDN name
Domain DNS name
1
DC01.HQ.local
HQ.local
2
DC02.HQ.local
HQ.local (secondary DNS)
3
SRVPDC01.DOMAIN1.local
DOMAIN1.local
4
SRVPDC01.TEST1.local
TEST1.local
5
TESTDC01.TEST2.local
TEST2.local
Two-Way Forest Trusts are configured without any problems but here's an overview when the error occurs.
On SRVPDC01.DOMAIN1.local -> adding user1.HQ.local to the AD =
error
On DC01.HQ.local -> adding user1.DOMAIN1.local to the AD = no problem.
On SRVPDC01.TEST1.local -> adding user1.HQ.local to the AD =
error
On DC01.HQ.local -> adding user1.TEST1.local to the AD = no problem.
On TESTDC01.TEST2.local -> adding user1.HQ.local to the AD = no problem.
On DC01.HQ.local -> adding user1.TEST2.local to the AD = no problem.
What are my options to fix this? There must be more possibilities than renaming the DC names.
And why does the problem only occur when adding users in Foreign domain ->from-> HQ.local and not HQ.local ->from-> Foreign domain. Because that's the only
thing I really need: users from HQ.local having permissions in groups of the other domains… :(
Any advise or help would be much appreciated. I've been struggeling with this for a while now and i'm pretty much out of ideas.Hi aperelli,
On srvpdc01.DOMAIN1.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.hq.local
Result:
C:\Windows\system32>nslookup
DNS request timed out.
timeout was 2 seconds.
Default Server: UnKnown
Address: ::1
> set type=all
> _ldap._TCP.DC._msdcs.HQ.local
Server: UnKnown
Address: ::1
Non-authoritative answer:
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = dc01.hq.local
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = dc02.hq.local
dc01.hq.local internet address = 192.168.1.200
dc02.hq.local internet address = 192.168.1.201
=======================
On srvpdc01.TEST1.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.hq.local
Result:
C:\Windows\system32>nslookup
DNS request timed out.
timeout was 2 seconds.
Default Server: UnKnown
Address: ::1
> set type=all
> _ldap._TCP.DC._msdcs.HQ.local
Server: UnKnown
Address: ::1
Non-authoritative answer:
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = dc01.hq.local
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = dc02.hq.local
dc01.hq.local internet address = 192.168.1.200
dc02.hq.local internet address = 192.168.1.201
=======================
On DC01.HQ.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.domain1.local
Result:
C:\Windows\system32>nslookup
Default Server: dc01.hq.local
Address: 192.168.1.200
> set type=all
> _ldap._tcp.dc._msdcs.domain1.local
Server: dc01.hq.local
Address: 192.168.1.200
Non-authoritative answer:
_ldap._tcp.dc._msdcs.domain1.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = srvpdc01.domain1.local
srvpdc01.domain1.local internet address = 10.0.113.150
=======================
I have tested port 3268 and 3269 with Port Query UI and ports are listening on alle DC servers. -
Installations on domain controllers are not supported
Hi All, While checking prerequisites of operating system users and groups, following error message are getting. "installations on domain controllers are not supported". Please help. Thanks, Sam
Hi Sam,
I assume as a technical limiation from SAP. which I suppose being as a local user or even as a local group cannot be done or created on Domain controller..
"You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the domain controller is installed.
I hope it helps.
Regards,
Deepanshu Sharma -
System not giving Forward date when Material will be available
Dear All,
I have a problem of system not giving me the forward date when material will be available in the schedule line. I will give you an example - say material - A01 , stock of same is - 500 qty available. Availability check - 02(Individual reqt), all other MRP controllers also set properly.
Now i create Sales order for the same material for 650qty, system confirming 500qty but not giving me the confirmed date when rest 150qty will be available in the schedule line.
Kindly tell me which config setting needs to be enabled to get this in sales order.
Thanks in advance...Is there a MRP element which could cover the remaining 150? Like a purchase or production order, for example?
If there's none, and you still want to have a confirmation after the replenishment lead time, maintain the RLT in material master, and use/define an ATP check that is taking in consideration RLT.
If there's such an element, use/define/review ATP checking logic, to include such elements in the check. -
Domain did not find after 2 weeks
Hello everyone
We have both Macs and PCs with 1 Mac Server 10.4.8. The PCs have to join the domain. We created PDC with domain: MEDIER. It was working good. But new PCs could not find MEDIER after 2 weeks. So I have to stop service and restart service, then it will work again. I dont know what problem it is. Hope someone can help. Thanks
Regards
Tri
( Server Admin-Computers & Services-Windows-Settings-General)At the beginning, we upgraded from OS Server 10.3.9 to Server 10.4.8. it did not work good at all. We decided to install new, fresh installation Server 10.4.8, and then updated to 10.4.10 now. Lookup and forward DNS are working: internal.loc = 192.168.1.3.
I tried to join MEDIER, it said that "the domain could not find domain bla bla bla, contact the administrator...". If I stop and restart the service, it could find the domain: MEDIER, and then PCs could join MEDIER without any problem. The problem is, I have to stop and restart the service after 2 weeks
Is the problem related to DNS or how to stop MEDIER from sleeping?
Thanks again -
BUG- the Integrated Weblogic domain was not built successfully. 11.1.1.2.0
I got this error when trying to run a test application on the latest release of JDeveloper.
The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.
Log File: C:\Documents and Settings\rommel\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.log
Label: JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Product Home: C:\Oracle\Middleware\jdeveloper\jdev\
Domain: C:\Documents and Settings\rommel\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain
"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Documents and Settings\rommel\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dms_11.1.1/dms.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/ws_confmbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-patching.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar
wlst >
wlst > PATH=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\Oracle\MIDDLE~1\JDK160~1.5-3\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1.5-3\bin;;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dms_11.1.1/dms.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/ws_confmbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-patching.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar
Elapsed time: 1657 ms
My configuration are as follows"
Java(TM) Platform 1.6.0_14
Oracle IDE 11.1.1.2.36.55.36
Versioning Support 11.1.1.2.36.55.36
Microsoft Windows XP Professional Version 2002 Service Pack 3
help!
pino
Edited by: pino on 30/11/2009 04:27 صHi Timo,
I modified the jdev.boot file as suggested but still resulted to the same error. (note: The "C:\Oracle\Middleware" is not recognized)
# The ide.user.dir.var specifies the name of the environment variable
# that points to the root directory for user files. The system and
# product will use its base directory as the user directory.
ide.user.dir.var = JDEV_USER_HOME,JDEV_USER_DIR
ide.user.dir = C:/Oracle/Middleware[Waiting for the domain to finish building...]
[01:42:43 PM] Creating Integrated Weblogic domain...
The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.
[01:42:45 PM] ERROR: An error occurred while building the default domain.
Please see this log file for more details:
C:\Oracle\Middleware\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.log
Log File: C:\Oracle\Middleware\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.log
Label: JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Product Home: C:\Oracle\Middleware\jdeveloper\jdev\
Domain: C:\Oracle\Middleware\system11.1.1.2.36.55.36\DefaultDomain
"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Oracle\Middleware\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dms_11.1.1/dms.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/ws_confmbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-patching.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar
wlst >
wlst > PATH=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\Oracle\MIDDLE~1\JDK160~1.5-3\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1.5-3\bin;;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dms_11.1.1/dms.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.webservices_11.1.1/ws_confmbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\ORACLE~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jps_11.1.1/jps-patching.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar
Elapsed time: 984 ms -
SOA Suite Components on JBoss - not possible?
Hi,
I am currently evaluating the Oracle SOA products for a new project.
We would like to use JBoss instead of OC4J and use Oracle BPEL Process Manager, Oracle ESB and Oracle Web Service Manager.
Running on OC4J is not possible, especially since Oracle will replace it with Weblogic in the next release.
What I have found are instructions for installing BPEL PM and the whole SOA Suite on JBoss.
These are VERY COMPLEX and CUMBERSOME (two patches have to be installed semi-manually) installations and I have not been able to make them work in my first attempt.
For ESB and WSM I have not seen any information at all.
We have not bought the products yet and I have to say that this is a very bad start in the evaluation of product quality and support quality.
Please clarify if Oracle's support for alternative application servers only exists in the data sheets or also in reality.
If we purchase the components, will we have access to other installables that run directly on JBoss?
If anyone has good experience with Oracle SOA on JBoss I'd be glad to know.
Kind Regards
FabianFabian,
Oracle's support for other applications servers such as JBoss, Websphere, WebLogic, etc is more a sales story than something that people do in practice. Oracle doesn't want to lose a sale because a customer has a strategic alliance with a particular application server. So they support SOA Suite on the main competitors. Licensing is a dark art and I couldn't give you a 100% guarantee on how SOA Suite is sold but to get SOA Suite you need to license enterprise Application Server. SOA Suite is on top of this. If you turn it around if you buy SOA suite you get Oracle Application Server enterprise edition (includes OC4J) for free.
So if you are looking at using JBoss for a cost cutting exercise I don't believe the licensing at Oracle will help you.
The install for SOA Suite is the install for ESM + WSM, there is no separate install for these products for thrid party application servers. So you topology is not as flexible as it could be is you used Oracle Application Server.
Your proposed option of SOA Suite (ESB, WSM) is an option using the document provided in previous post.
When I say Oracle Application Server I mean Oracles existing Application Server, Not Web Logic. There is currently a progression of porting the OC4J apps to Weg Logic, this should be completed when 11g arrives. There are a few version release before this happens, each one providing more functionality.
If I was you I would understand the price of SOA Suite on JBoss as apposed to Oracle Application Server. If the price comes close then I would go with using the Oracle Application Server. If you want to use the ESB, I would go with Aqua Logic installed on WLS. Currently SOA Suite is not certified on the 10.3 release hence keep it on the Oracle Application Server. There will be a migration path to 11g next year.
cheers
James -
NI488.2 linux driver software not working
I have installed and uninstalled and re-installed several times NI 488.2 driver for linux. Version 2.5 - in SUSE Linux 10.1.
When selecting troubleshooting, it says the software wasn't installed correctly and says to re-boot and install sofware again. The GPIB explorer sees the card, but I can't get past the troubleshooting box that says to reinstall the software. When I uninstall, the nikal and nipal do not totally uninstall. I looked at the knowledge database and followed the directions on uninstalling, however the UNINSTALL in the /usr/local/natinst/ni4882 directory do not exist, evan after I re-installed the driver again. I don' t know where to go from here to figure out why the software is not installed correctly. Can you direct me in the right direction to correct whatever problem may exist?Hi Song M!
This is a screen capture of when I uninstall the driver. I've done this before. Apparently, it doesn't totally uninstall and I'm wondering if that has something to do with my installations not working properly. However, I get no errors when I install the driver. In answer to your other questions - the driver is running just fine on another linux machine. I believe there is something in my linux installation causing this, but I'm not quite sure what it is, and where to start poking around. I also believe the problem is in the installation of the sofware, not the hardware, since that is the error I receive.
linux:~/gpib # ./UNINSTALL
NI-488.2 Distribution
version 2.5.1f0 for Linux/x86 32-bit
NI-488.2 Distribution version 2.5.1f0
is about to be uninstalled using rpm at /usr/local/natinst
Continue? [Yn] y
Uninstalling NI-488.2 Distribution version 2.5.1f0...
labview80-rte cannot be removed, other packages depend on it.
nipali cannot be removed, other packages depend on it.
nikali cannot be removed, other packages depend on it.
Pre Uninstallation ......
* A reboot is required before attempting to finish uninstalling the
* NI-488.2 Distribution software from your system.
Would you like to reboot now? [yes|no]
I found a problem in the knowledge database about uninstalling earlier when I was attempting to fix this problem. It follows. I do not have uninstall scipts in these directories after installation of the software. So, I'm not sure if there's a problem in my installation, or if these just don't exist anymore. But, in any case, I can't uninstall everything.
This is what I saw in the knowledge base:
Problem:
How do I uninstall the NI-488.2 version 2.5 driver for Linux?
Solution:
Uninstallation scripts ship with the NI-488.2 version 2.5 driver for Linux. The uninstallation is componentized, so you will have to run multiple scripts if you wish to completely remove the driver from your system. To uninstall NI-488.2, run the following commands as root:
/usr/local/natinst/ni4882/UNINSTALL-help
/usr/local/natinst/ni4882/UNINSTALL-util
/usr/local/natinst/ni4882/UNINSTALL-driver
Additionally, NI-KAL as well as an additional NI support library are installed with NI-488.2 version 2.5 but may be required by other NI programs. If you do not need any additional NI software, run the following uninstallation scripts:
/usr/local/natinst/nikal/bin/UNINSTALL
/usr/local/natinst/nipal/bin/UNINSTALL
Note: Newer versions of NI-KAL and the NI support library installed by NI-488.2 may not include these UNINSTALL scripts. In this case the NI-DAQmx or NI Modular Instruments Driver UNINSTALL scripts should be run last and they will remove NI-KAL and the NI support library.
The NI-488.2 installer also installs the LabVIEW Runtime Engine. Depending on the Linux distribution, you will need to either remove this via RPM or by deleting the shared object from /usr/local/lib.
So, still looking for more suggestions. I have attempted all you said to do. And still have the same problem.
Thanks,
SoftEng -
After I updated to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?
Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away. -
FB 4.6 Installation fails. Information not found in Media_db
Hello everyone,
I have heard so much about the new features and performance updates in FB 4.6 that I decided to give it a try.
I removed my old FB 4.5 installation and run the FB 4.6 installer, but it does not complete... It aborts the installation with a simple installation failed message and no additonal info.
the log-file however offers the following information
----------------- CreatePayloadSession: machine is x64 ---------------
[ 1400] Tue Dec 13 18:44:38 2011 FATAL
Payload '{ED28819E-310F-4F17-925C-C69B0A1C1F7F} Suite Shared Configuration CS5.5 5.0.22.0' information not found in Media_db.
[ 1400] Tue Dec 13 18:44:38 2011 INFO
:: END TIMER :: [Total Timer] took 24685.1 milliseconds (24.6851 seconds) DTR = 10.8567 KBPS (0.0106023 MBPS)
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s), 0 warning(s)
FATAL: Payload '{ED28819E-310F-4F17-925C-C69B0A1C1F7F} Suite Shared Configuration CS5.5 5.0.22.0' information not found in Media_db.
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 7 - Unable to complete Silent workflow.
I tried to install it in windows safe-mode (And yes I run the file as an admin), same result. I also got the tip to rename my Media_db file under ...Common Files/Adobe/caps still no changes.
I cannot figure out the Problem, the installation of 4.5 just went fine.
My system:
Windows 7 64bit.
AMD 1090T hexacore CPU
8GB Ram
44GB free disk space
CS 5 PP installed (but no sign of a conflict)reinstalled FB 4.5 again
deinstalled FB 4.5 again
installed FB 4.6
finally completing without Error -
Please tell me why my domain can not connect the tuxedo
010332.busiSvr!GWTDOMAIN.24457.1.0: LIBGWT_CAT:1128: INFO: Connection accepted from domain (domainid=<BIZ9902>)
010332.busiSvr!GWTDOMAIN.24457.1.0: LIBGWT_CAT:1130: INFO: Disconnected from domain (domainid=<BIZ9902>)
010335.busiSvr!GWTDOMAIN.24457.1.0: LIBGWT_CAT:1128: INFO: Connection accepted from domain (domainid=<BIZ9902>)
010335.busiSvr!GWTDOMAIN.24457.1.0: LIBGWT_CAT:1130: INFO: Disconnected from domain (domainid=<BIZ9902>)
the same config in an other domain,it works，but in this domain is not。Hi,
This is my WTC Server configuration,
<wtc-server>
<name>WTCServer-0</name>
<target>busiServer2-Server-1</target>
<wtc-local-tux-dom>
<name>testbusi2</name>
<access-point>testbusi2</access-point>
<access-point-id>testbusi2</access-point-id>
<connection-policy>ON_STARTUP</connection-policy>
<retry-interval>60</retry-interval>
<max-retries>9223372036854775807</max-retries>
<block-time>60</block-time>
<nw-addr>//busisvr2:33553</nw-addr>
<cmp-limit>2147483647</cmp-limit>
<interoperate>No</interoperate>
<keep-alive>0</keep-alive>
<keep-alive-wait>0</keep-alive-wait>
</wtc-local-tux-dom>
<wtc-remote-tux-dom>
<name>logina</name>
<access-point>logina</access-point>
<access-point-id>logina</access-point-id>
<connection-policy>LOCAL</connection-policy>
<acl-policy>LOCAL</acl-policy>
<credential-policy>LOCAL</credential-policy>
<local-access-point>testbusi2</local-access-point>
<nw-addr>//loginsvra:33452</nw-addr>
<federation-url></federation-url>
<federation-name></federation-name>
<cmp-limit>2147483647</cmp-limit>
<min-encrypt-bits>0</min-encrypt-bits>
<max-encrypt-bits>128</max-encrypt-bits>
<app-key>TpUsrFile</app-key>
<allow-anonymous>false</allow-anonymous>
<default-app-key>-1</default-app-key>
<keep-alive>0</keep-alive>
<keep-alive-wait>0</keep-alive-wait>
</wtc-remote-tux-dom>
<wtc-import>
<name>WTCImportedService-0</name>
<resource-name>LOGINSVRA</resource-name>
<local-access-point>testbusi2</local-access-point>
<remote-access-point-list>logina</remote-access-point-list>
<remote-name>logina</remote-name>
</wtc-import>
</wtc-server>
Thanks a lot! -
.its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening
Also, if you downloaded earlier in the week, make sure you have the 37.0.1 updated that was released on Friday (I think).
If needed, I suggest installing a slightly different way the next time:
'''Clean Reinstall'''
We use this name, but it's not about removing your settings, it's about making sure the program files are clean. As described below, this process does not disturb your existing settings. Do NOT uninstall Firefox, that's not needed.
(1) Download a fresh installer for Firefox 37.0.1 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox (if applicable).
(3) Rename the program folder
''(64-bit Windows folder names)''
C:\Program Files (x86)\Mozilla Firefox
to
C:\Program Files (x86)\OldFirefox
''(32-bit Windows folder names)''
C:\Program Files\Mozilla Firefox
to
C:\Program Files\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
Any difference?
Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* \OldFirefox\Plugins
* \OldFirefox\browser\plugins -
Server Instance cannot be started because the Integrated WebLogic domain was not built successfully
Hi,
I am using a Linux X64 and running JDeveloper 11g R2, J2EE Edition Version 11.1.2.1.0.
I am having an error when i Run my JSP Page. It says:
The Server Instance cannot be started because the Integrated WebLogic domain was not built successfully.
Error log:
Jan 31, 2012 1:39:44 AM oracle.security.jps.util.JpsUtil disableAudit
INFO: JpsUtil: isAuditDisabled set to true
Compiling...
Nothing to build.
[1:39:59 AM] Appc compilation begin
Compiling out of process...
/usr/java/jdk1.7.0_02/jre/bin/java -Xms128m -Xmx512m -Xverify:none -client -classpath /usr/java/jdk1.7.0_02/lib/tools.jar:/scratch/tchoudhu/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.jsp.diagnosticWithAbsolutePath=true -Dweblogic.classloader.noJarSigners=true weblogic.appc "@/tmp/appcCommandList157371966291066996.txt"
[1:40:01 AM] Appc compilation end
[1:40:01 AM] Successful compilation: 0 errors, 0 warnings.
[Application Test_Project1Application is bound to Server Instance IntegratedWebLogicServer]
[Starting Server Instance IntegratedWebLogicServer]
#### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
Compiling...
Nothing to build.
[2:12:30 AM] Appc compilation begin
Compiling out of process...
/usr/java/jdk1.7.0_02/jre/bin/java -Xms128m -Xmx512m -Xverify:none -client -classpath /usr/java/jdk1.7.0_02/lib/tools.jar:/scratch/tchoudhu/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.jsp.diagnosticWithAbsolutePath=true -Dweblogic.classloader.noJarSigners=true weblogic.appc "@/tmp/appcCommandList3807439261747014006.txt"
[2:12:32 AM] Appc compilation end
[2:12:32 AM] Successful compilation: 0 errors, 0 warnings.
[Application Test_Project1Application is bound to Server Instance IntegratedWebLogicServer]
[Starting Server Instance IntegratedWebLogicServer]
#### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
Compiling...
Nothing to build.
[2:48:14 AM] Appc compilation begin
Compiling out of process...
/usr/java/jdk1.7.0_02/jre/bin/java -Xms128m -Xmx512m -Xverify:none -client -classpath /usr/java/jdk1.7.0_02/lib/tools.jar:/scratch/tchoudhu/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.jsp.diagnosticWithAbsolutePath=true -Dweblogic.classloader.noJarSigners=true weblogic.appc "@/tmp/appcCommandList2888192197450875810.txt"
[2:48:16 AM] Appc compilation end
[2:48:16 AM] Successful compilation: 0 errors, 0 warnings.
[Application Test_Project1Application is bound to Server Instance IntegratedWebLogicServer]
[Starting Server Instance IntegratedWebLogicServer]
#### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
I am new to JDev. Can someone please help me with this?Use a supported JDK (1.6.something, not 1.7) is what the original poster didn't do.
Maybe you are looking for
-
The instalation stops in the middle, when the DVD-RW stops the read of DVD for Windows 7 instalation. One message shows that reading of CD instalation is failing. I can to install only the Windows XP.
-
How do I transfer my account To my new ipad?
I have a new Mini/Retina that I want to replace my iPad 2 with. I want to use my same old AT&T account for cellular/data connection, so how do I transfer my account To my new iPad? The guy at the AT&T store (where I bought the Mini) said I would hav
-
Is there a way to add a static route in an Ipod touch ?
I am trying to get the ipod touch to configure correctly for our wireless network. The wireless side does not provide DNS or DHCP directly . Rather this is done from a different subnet . This assists to a small extent with our wirless security in tha
-
Installed lion, "pinch to zoom" does not exist in preferences/trackpad
installed lion, "pinch to zoom" does not exist in preferences/trackpad
-
New feature: "double-clicking a track item in a sequence will automatically perform a match frame to the playhead position when it is parked on a frame within that item", what this mean? Hi, i just got the new version CC 2014 in my work and was just