Webcenter PS3 and UCM

Running Win 2008 Server 64-bit, 11G db, Weblogic 10.1.5
I just installed Webcenter and I'm trying to run the demo application by following:
http://docs.oracle.com/cd/E21764_01/webcenter.1111/e10273/prepare.htm#CEGHGFEC
The Tutorial talks about 'checking in files' usingthe Universal Content Management:
http://docs.oracle.com/cd/E21764_01/doc.1111/e10797/c06_checking_in_files.htm#CSUSG905
My questions are:
1) Do I need to install UCM in addition WC?
2) Where can I obtain the right version of UCM?
3) How is UCM best configured and where can I find documentation on it?
Many thanks, J

Jay,
Oracle Enterprise Content Management Suite 11g does not support running Oracle UCM, Oracle IBR, or Oracle URM as a service on a Windows operating systemUCM is certified to run on Windows, Perhaps the Managed Server for UCM cannot be configured as a windows service. I'm not exactly sure about that one. Here's the general certification information:
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
and specifically for UCM:
http://www.oracle.com/technetwork/middleware/webcenter/content/oracle-ecm-11gr1.xls
This shows that Windows Server 2003 SP2/R2+ & Windows Server 2008 SP1 & Windows Server 2008 R2. So any of those and you should be fine (i'd try to stick to linux though :) )
Can you please explain the implication of this on running UCM with WC? Does this mean UCM cannot be used? or does this mean UCM must be installed as a seperate >component? UCM is a content management system. WCPortal is a portal framework. If you want to integrate CMS features into WCPortal, they you'll need to have the appropriate back-end system in place. Eventually, it'll be easier to plug in 'any' CMS, but Oracle's is the best-practice and most supported solution.
UCM is a separate component, & more specifically, a separate Managed Server. You should also consider installing IBR as another Managed Server. This is according to the WCPortal docs.
Or does this mean I can still use UCM as a content repository even though it is not supported as a service by ECM? Thank you!UCM will be a fully functioning content repo if used with WCPortal. It will depend on your license as to exactly what you can do with that instance of UCM. I believe limited use licesenses given with WCPortal say that the UCM instance is expected to be used through the WCPortal and not standalone. You should talk to your account rep for specific details.
You don't need a UCM instance solely for WCPortal, but it's probably best practice to have it be that way in production.
Does that help out?
Thanks,
-ryan

Similar Messages

  • PS3 and UCM windows 7

    Hello,
    I already installed latest webcenter PS3.
    Next I want to install latest version of UCM 11g.
    Mine is Windows Home 7.0 edition.
    Can anyone direct me to step by step process ... how to install latest UCM on windows 7 ?
    step by step meaning :-
    a> where to download the latest UCM 11 g ?
    b> installation steps of UCM 11g on windows 7 ? (port, webserver etc )
    c> finally, webcenter UCM integration.
    I do NOT have apache / Microsoft IIS on my machine. Is this something needed for UCM to work ? what are steps involved.
    thx

    For software download-
    use this url: http://www.oracle.com/technetwork/middleware/content-management/downloads/index-085241.html
    Before downloading the software you need to check the accept radio button
    For installation of UCM in windows 7:
    go through the url:
    http://fusion.infofabrics.com/Home/enviornment-infrastructure/11g-installation/webcenter-11g-ucm-11g-installation
    For UCM and webcenter integration:
    http://www.yonaweb.be/webcenter_universal_content_management_integration
    For port and other stuffs ,
    go through the below url:
    http://www.yonaweb.be/enable_ucm_check_in_profiles_webcenter_ps3_0

  • WebCenter Sites and UCM integration

    Hi,
    Can any one help me to integrate WebCenter Sites with UCM.

    There are a number of approaches to doing this, and it totally depends on the version of UCM you're using (and the version of Sites too for that matter).  Have a look at this presentation that Bex Huff and I gave at Collaborate last year. 
    Seamless Integrations between WebCenter Content, Site Studio, and W...
    Regards,
    Tony

  • WebCenter PS4 and UCM 11gR1-11.1.1.4.0

    About to start installing the latest version of WebCenter PS4 and want to link it to an already existing instance of UCM which is "11gR1-11.1.1.4.0-idcprod1-110927T172036 Build 7.3.0.180". Is there any particular problems anyone is aware or should this work just fine?
    I don't really want to start with an older version of WebCenter if I can avoid it.
    Dave

    Hi
    Yes, that will work as well since all that we are doing is to connect Webcenter to UCM which will act as the repository .
    Thanks
    Srinath

  • Webcenter Portal and UCM - Content Presenter Error

    Hello,
    I get an error while I'm adding a Content Presenter over the default resource catalog of my webcenter portal application and try to create content.
    When pressing the create content button a new browserpage opens and after beeing logged in to the Content Server the cs/resources/wcm/custom/sitestudio/contentwizard/webcenter/contentwizard.hcsp is called and this error message appears as an alert:
    "*this placeholder is restricted, but no region definitions have been specified*"
    Thanks for any advice!

    Looks like the configuration of UCM (SSXA) is not completed in your system. Take a look at this manual http://docs.oracle.com/cd/E23943_01/doc.1111/e13650/toc.htm to understand the relationship between region definitions and placeholders. Note that Content Presenter is just a client here (it's a matter of WebCenter Content configuration).

  • Oracle Webcenter Portal and UCM Problem

    hi, I'm using both applications but it seems UCM always ask authentication before viewing the checked in files to webcenter portal.
    How can I view the files checked in to UCM through webcenter without UCM authentication??????????I set the files security to public.
    Thanks

    Looks like the configuration of UCM (SSXA) is not completed in your system. Take a look at this manual http://docs.oracle.com/cd/E23943_01/doc.1111/e13650/toc.htm to understand the relationship between region definitions and placeholders. Note that Content Presenter is just a client here (it's a matter of WebCenter Content configuration).

  • Weblogic portal 10.3.1 framework and  UCM 10gR3 code works in Jdeveloper

    Hi All,
    We are using weblogic portal 10.3.1 framework and UCM 10gR3. Now we want to use Jdeveloper (because we can integrate site studio using plugin) instead of weblogic workshop.
    So my question is does the existing code works in Jdeveloper (because it supports Webcenter portal)?.
    Thanks,
    Venkata Sarvabatla

    No. Eclipse/Worskhop is the development IDE for WLP. While you can probably edit many of the WLP artifacts in JDeveloper, since they're mostly XML files, JDeveloper won't understand the WLP project structure, understand many of the libraries or know how to deploy to a WLP domain.
    Brad

  • Which webcenter services need UCM?

    Hi,
    Can somebody please tell me which webcenter services need UCM?
    Thanks in advance

    Thanks for the reply!
    Basically we are not able to install UCM alongwith Webcenter (due to performance issues).
    So we would like to know if we can still build/integrate some services without UCM.
    Apart from the services you mentioned, can we build/integrate following services also, without UCM?
    Announcements Service
    Instant Messaging and Presence Service
    Links Service
    Mail Service
    Recent Activities Service
    RSS Service
    Search Service
    Thanks

  • Webcenter PS3 Avitek sample

    Where can I download the Avitek sample ZIP for webcenter PS3 version ?
    also, can anyone point me to any additional sample example zips for PS3 ?
    thx

    You can download the complete VM with webcenter, jdeveloper and the avitek demo:
    http://www.oracle.com/technetwork/middleware/webcenter/downloads/owcs-portalfw-vbox-284132.html
    I don't know if the avitek sample zip is available...
    You can also do following tutorial: http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/intro.htm
    Edited by: Yannick Ongena on Feb 3, 2011 7:58 AM

  • I can't use PS3 and Laptop at same time ?

    OK I'm hoping although strange this might be a simple as changing a setting in my hub or laptop, here goes:-
    Like many housholds nowadays I have many things connected to my Hub, Desktop, Ipod, Phone, Sky, games machines,etc
    Well the problem I have, is when I stream Netflix or Amazon prime on my PS3 it buffers a lot or wont go HD for quite some time, no problem I switched to a wired set up, which helped with speed a lot, happily watching movies of an evening,
    then one evening, it kept saying it's taking a long time to sign in, and wouldn't, I re check my network settings, and it shows unable to obtain an ip address,
    so I set up the wirless again, and the same problem,
     anyway after a few nights of this, I get a bit fed up, then out of the blue, it works again, both wireless and when I switch back to wired,
    so I settle down to watch a film, fire up laptop, and after a few mins it flashes on my PS3 I have been disconnected, I peice things to gether and realise, when I have laptop on I cant connect PS3, even if laptop is wirless and PS3 wired ?.
    I assume they are both using the same ip ?, I deleted the laptop from my Hub in the hope it would assign another, fired up PS3, and then re booted laptop, but straight away it kicks out PS3.
    I have mooched arround in hub advanced settings, but I dont know what I'm doing, so not going to adjust anything, so if it is just a case of modifying my laptop or hub settings, if someone could instruct me I would be greatful, and if its not thought to be that HHEEEEEEEEEEEEEEEEEEEEEELLPP   Please
    Thanks in advance
    Chris
    P.S. I have searched the forums, there seems to be a lot of PS3 connection problems, but nothing that matches my particular problems

    No I'm afraid that didn't work either

  • Can i stream the content on my airport extreme to my PC, PS3 and iPad ?

    I want to purchase either the Airport Extreme (and plug in a 1TB external hard drive) or the Time Capsule. I want to know if it is possible to share the media in either of the drives (movies of all formats avi flv wmv mp4 and songs etc) wirelessly on my PC, PS3 and iPad.
    I basically just need an airport express because i need to extend my wireless range by plugging in an ethernet cable. But if i will be able to share the content in a hard drive wirelessly without much mess, then i'd go for the capsule or the extreme. I've googled around and found that its incredibly messy to stream non-mp4 videos on iPad, u need to copy the entire movie onto ipad to watch it and blah blah.
    Can anyone tell answer me like u talk to a non-tech freak ? Thanks

    See this older post from another forum member Zevoneer covering the different methods available for copying content from your iPod back to your PC and into iTunes.  Once you have successfully done that, you can safely choose the Erase and Sync option.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • What do I need to hook up XBox w/Kinect, PS3 and Wii Gaming Consoles

    Hello all, 
    I have a Flat screen TV purchased about 3 years back.  It has 1 HDMI port and it has I believe two sets of the red/white/yellow ports (a set on the left and a set on the right).  I want to connect the following:
    1 – Xbox with Kinect
    1 – PS3
    1 – Wii
    I know I need 1 HDMI cable
    We have Comcast wireless internet and the modem/router is in a neighboring bedroom.
    What else do I need to purchase in order to hook up all units?
    Thanks for your time and assistance. 
    Solved!
    Go to Solution.

    You can buy a HDMI switcher with a remote. It will require 3 HDMI cables but you can switch from the Xbox or PS3 with the remote.
    The red/white/yellow ports doesn't put out HD resolution so you can use the Wii for that.
    So you can get a HDMI switcher or plug HDMI to either Xbox or PS3 and the two remaining will be connected by the red/white/yellow ports.
    I believe the new Xbox, most PS3, and the Wii have built-in WiFi adapter already.

  • Webserver and UCM in different machines

    As the title said.. how do I do this? in the installation guide it's just for both in one machine but how do i install webserver in a windows server and UCM in a unix server?
    Is this even possible? please some advice or redirect to some solution,
    Thanks

    Hi
    Look at Note : 885983.1 on metalink . This gives the steps to configure Cs when webserver is on a different machine altogether.
    Srinath

  • BPM and UCM Integration

    I want to save some flexField value of a BPM human task into a custom field created in UCM doc store, for that i am following the following steps
    1) Created a custom field in UCM document store
    2) Created a flex field in BPM work Space
    3) Added pay load in human task from the "*data*" tab of human task flow
    4) Mapped Pay load with the flex field of BPM Work Space
    5) Now when I want to map the pay load attribute by adding a custom attribute in the "documents" tab of the human task, IDE is not allowing to add any custom fields except the pre populated values.
    In this situation if I want one of my human task payload attribute to be saved in the custom field created in the document store how to do it. According to the Oracles guide we can add a new attribute through the "**document**" tab of the human task flow but it is not happening.

    OK, so you are using the attachment option from BPM.
    I gave you few hints in my previous post, but I will explain them in more details:
    a) BPM has its own metadata
    Forget for your document for a moment - the BPM process instance still can have its own metadata. These are used when you create BPM screen flows.
    I think you will need to create a BPM parameter to store your custom value first. (and this is really purely a BPM question)
    b) A document can be attached to a BPM process instance
    In a sense, such a document is nothing, but an additional information for the BPM process instance. This has nothing to do with document-oriented workflow (quite often, the attached document enters no workflow at all); it is the BPM process instance that routes across the organization, not the document.
    c) BPM metadata <--> UCM metadata
    AFAIK, there is no integration between BPM and UCM concerning metadata. You may check-in (attach) a new document using UCM profiles, but for your process this value is not visible - unless you call a service to retrieve it/update it. If you implemented a) (created your custom value in BPM), you may call UCM's services to update this value - at the minimum when you are leaving from the BPM workflow step.

  • Formatting external hdd for PS3 and final cut.

    I recently purchased a 1TB external hdd. I would like to partition this drive so I have 320gb to back up my PS3 and the rest to use to store my Final Cut express projects.
    Does anyone know if this is possible? I know the PS3 only reads FAT32 and I am wondering if it will be able to pick up my external hard drive if part of it is not formatted FAT32.

    Oskar,
    This is the Final Cut Express Forum, not a PS3 forum. There's no reason to expect anyone in this forum to be able to answer questions about PlayStations. Tom was quite reasonable suggesting that you search elsewhere.

Maybe you are looking for