Webcenter + UCM 11g

Hi people,
Someone knows tell me with I need to some configuration at UCM 11g to use this with Oracle Webcenter 11g R3?
Thanks

The only thing you really need to do different than the 10gr3 UCM configuration is add "IntradocServerPort=4444" to the config.cfg ion UCM 11g. This config is not there by default in 11g but adding it allows the content server to listen on that port just like it always has.
Hope that helps,
Andy Weaver - Senior Software Consultant
Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw_OTN_WCF >

Similar Messages

Has anyone got UCM 11g running on Windows 7 64bit?

Hi,
I've just installed UCM 11g on a 64bit Windows 7. During installation I had some issues concerning the user rights, but now almost everything works fine.
Except of two issues:
1. when starting the UCM (startManagedWebLogic.cmd) I get the following exception:
!csNativeOsUtilsError!syNativeOsUtilsNotLoaded!syJavaExceptionWrapper,java.lang.UnsatisfiedLinkError: intradoc.common.NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
java.lang.AssertionError: !syNativeOsUtilsNotLoaded
     at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:386)
     at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:352)
     at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:26)
But the server is running.
2. Fulltext-Search doesn't work.
Message in the UI:
!csUserEventMessage,weblogic,localhost:16200!$!csSearchUnableToReturnResults
intradoc.common.ServiceException: !csSearchUnableToReturnResults
at intradoc.server.SearchManager.retrieveSearchInfo(SearchManager.java:269)
at intradoc.server.SearchService.retrieveSearchInfo(SearchService.java:1811)
at intradoc.server.SearchService.doLocalSearch(SearchService.java:1360)
at intradoc.server.SearchService.getSearchResults(SearchService.java:654)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
As UCM is not certified for Windows 7 I'm not sure if this is a configuration issue or a generel problem with Windows 7.
Has anyone got this installation run on Windows 7 (64bit)?
bye Stephan...

Assuming that you want to install the 64 bit UCM 11g version:
Issue with installer closing screen could be related with JAVA_HOME variable or wrong java version.
1. Check if 64 bit JDK (not JRE) is installed in a directory without spaces (not default Program Files… but something like C:\Java\).
2. Check if windows environment variable JAVA_HOME exists and is pointing to JDK directory (like C:\Java\jdk1.6.0_24)
3. Open command prompt and check java version with: java –version. It should return “Java HotSpot 64-Bit Server”.
A little bit more deatils here: Re: Installation issues with WebCenter UCM 11g
Regards,
Boris

Information Architecure for UCM 11g/WebCenter PS4

Hi
Can anyone share their info architecture findings for UCM/11g and WebCenter PS4 e.g. security model, metadata model, taxonomy approach for managing group spaces. I'm keen to hear if you've put a info governance structure around the content for example - and if so - how did you form it? Where did your security model stope e.g. at Group Space level, or did you have to consider the confidential nature of documents within folders in the group space. Have you add additional metadata fields to help with search?
Regards
Michelle

Wll, it's quiet easy. Webcenter is designed to handle services. UCM is also complettly service oriented so you could create a webapplication with webcenter where you define services from UCM and create your own user interface.
It's nothing more than the fact that webcenter can handle services (WSDL, SOAP).
You could create a site without siteStudio, using webcenter. Nothing wrong with that but don't forget that siteStudio has lots of tools that are great for UCM like the contributor mode. Also, the fragments that are allready build in in siteStudio give a big advantage. If you want to create these things in zebcenter, you'll have to start from scratch.
I do believe Oracle is working on an portal like interface to create portlets and stuff, perhaps they will create some tools special for the use of UCM and webcenter. This offcourse would be very nice

Oracle UCM 11g Config with DB

Hi,
I have configured Oracle UCM 11g in oracle sql developer, but am not able to see the tables related to Oracle UCM..(ex: Revisions, Docmeta).
Any documentation on this or any one faced this kind of issue.
Thanks...

I'd suggest you to follow the Installation guide - see Oracle&reg; Fusion Middleware Installing and Configuring Oracle WebCenter Content 11g Release 1 (11.1.1) - Contents
In a nutshell, tables (and everything else in the data model) are created by a utility called RCU. This is one pre-req to run the installation. Another issue could be that you have done installation, but you don't use the correct db user (scheme owner) to connect. The correct user for an installed instance can be obtain from the Weblogic admin console.

How to learn UCM 11g from scratch

From where should I learn UCM 11g I am new to this product.WebCenter Content

Hemant,
You will need a test system, use VirtualBox as you can undo any disasters by taking snapshots. If you don't know how to configure and administer managed servers in Weblogic Server then learn that first - just how to configure UCM and Node Manager so you can start and stop it from the Admin Server console.
It is worth learning to install Webcenter Content on Linux ( I recommend Oracle 6.6) and also on Windows if you want to use Enterprise Capture with Recognition but if you are impatient to start with UCM, Oracle have a ready-made VM with just about everything you need installed. Oracle WebCenter Portal 11.1.1.8 Virtual Machine | Oracle Technology Network | Oracle. You may need to patch the installation, I don't know what patch level it is set to.
When reading the Oracle documentation Make sure you get the WCC UCM documentation not the IPM documentation. Make lots of bookmarks and when you see "for more information on..." open the link in a new tab or you will get lost seven levels down when you realise you are back to the same page you started from.
Learn the security model, a group in Weblogic Server with the same names as a Role in UCM will be granted the Role's access, how to use content types, rules and profiles. if you have experience with any other DM systems, know that metadata fields in UCM are not attributes of a document class, they are attributes of the system and present for all documents unless you filter them out with Rules.
Know also that there are two Web UIs so when you read the latest documentation the screenshots are from the latest Web UI. I don't know if it has been installed in the Portal VM but if you want to install it, read the Support article 1618305.1, it is not simple.
Martin

What file types are included PDFExportConverter for Oracle UCM 11g (PS3)

For UCM 11g PS3 or later, (WebCenter Content if you prefer), I am trying to find out the list of file types supported for conversion to PDF, and which are out of the box, and which need a 3rd party download.
Is there any documentation that lists supported file types, and how to get any 3rd party converters?
This is very urgent as the customer needs to put in their budget and include any costs associated with 3rd party converters.
Thanks

Hi
I believe this should be good enough to have the details :
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10800/e96_conversion_formats.htm#sthref480
Thanks
Srinath

WebCenter UCM

Hello,
installed webcenter 11.1.1.5 and UCM 11g on windows 7 machine. also have UCM server running locally, have weblogic running. have also installed MDS.
I create a webcenter portal page - AboutUs and then use content presenter to drag about.htm from UCM on the AboutUs jspx at run time. the content is displayed. i go to ctrl shift c contribution mode and then at runtime try change the content and then save close.
Next time when I rerun this page, we lose runtime customizations when we rerun the portal. why ?
shouldnt my first time customization get saved in MDS, so that even next time I rerun the page, I get to see the modified content (in other words the content shoule not disapper ) ???
anyways, what to do that content along with changes made in previous run will show up even after second rerun ??

this link is applicable when i created am playing with embedded weblogic/webcenter of Jdeveloper (which is file based).
BUT I am having a full blown standalone weblogic running and also full blown standalone webcenter running. I am deploying application on these standalone servers. now how do i preserve the customizations on rerun on these standalones ? I have MDS setup in database.

Does UCM 11g provide any default skinning options?

I have 2 questions basically:
1 )In UCM 10g there is an option to select skins IN My Profiles menu which provides 2 skin options, Oracle and Oracle2.. Is it possible in 10 G to create a website and use these two skins in your website to change menu, layout etc?
2) My actual area of work is to create a website in UCM 11g, i couldn't find any such option in 11 G which 10 G provided in My Profiles. Are there any default skins provided by 11G. How can I make use of these skins in my web application?
I found out that we can apply different kind of skins in 11g using ADF Faces. But that is not to be used in my project. Is it the only option in 11g?
Thanks in advance.

OK I think you have confused two things here.
1)UCM ships with a native interface that is delivered by UCM based on HCSP/IDOC (A proprietary server side scripting language for generating HTML) this has been the case for about 10 years or so. THis native interface is used to provide the basic CMS capability and is oftent used as a simple clean front end for document management type deployments. UCM has very limited abilities to natively support personalisation (it does this by storing user settings on the file system) and one part of this is the ability to choose a layout and a skin. THe rendering of this profile is done via the HCSP/IDOC.
2)Since the Oracle acquisition of Stellent (~2007) there have been a number of productised ways to integrate UCM behind the Oracle ADF front ends of JDeveloper, WebCenter etc. The latest version of Site Studio lets you do just that using SSXA. I am not an ADF guru switiching between skins sounds perfeclty reasonable. BUT this has NOTHING to do with the old Oracle Oracle2 skins as far as I know.
I think you may be trying to run before you can walk really. First get to know UMC, Site Studio and ADF, then look at Site Studio SSXA and hopefully you will understand how/where skins can fit in.
Not trying to put you off but you have set quite a challenge to yourself
Tim

What is the portal that comes with webcenter suite 11g?

Hello,
What is the portal that comes with webcenter suite 11g?
How to retrieve the content from UCM using this portal?
-Scott

Scott,
The JCR adpater can be configured against Oracle Content Server(UCM), file system and Oracle Portal. This gives you only the read feature on the repository. However the web center frame work also provides you the Document Library Task flows with both Read/Write capabilities and other capabilities like recent documents, search etc. The task flows can also customized to suit your UI requirements as well. In addition to this there is a content presenter Task flow available where Business Users can display formatted content from UCM on web center page. This is similar to the content presenter portlet available inside WLP.
Regards
Vijay

Integrate UCM 11g with SES 10g

Hi all,
Does anyone know if it is possible to connect SES 10g with UCM 11g? In the certification matrix of ECM 11g it says:
Installation Type               Version Supported     Category                    Product                    Version                    Additional Comments / Exceptions
"Oracle UCM Oracle URM"     11gR1 (11.1.1.3+)     Search Crawler Integration     Secure Enterprise Search     10g (10.1.8.4) 11g (11.1.2)     Crawler integration.
"Oracle UCM Oracle URM"     11gR1 (11.1.1.3+)     Search (Full-text)               Secure Enterprise Search     11g (11.1.2)               For use as full-text search engine for UCM.
Does this mean that SES 10g cannot be used as full text search engine with UCM 11g?
Another related question: I seem to recall that starting from UCM 11g documents are stored in the database instead of on the file system by default. Is this true, and does this also require an 11g database version? I cannot find anything about this in the installation guide.
Regards,
Stijn

Hi Bill,
Unfortunately we're dealing with a Windows stack, and SES 11g isn't out yet for Windows.
Regarding your second point: you guys at Fishbowl really have a solution for everything ;-).
Have you also been able to solve the question I posted here: Region templates from Site Studio used in Webcenter applicaton
@Stijn wrote:
Basically we're developing a portal application in WebCenter and we want to store pages as content in UCM. We also want to make use of the Site Studio
contribution editor as this is the only way I see to be able to have a rich text editor with inline images.
Btw: what I'm still looking for is a way for a user to easily upload and use an image from within the rich text editor. The basic feature is that when you want to
insert an image, a search result of images is shown. This isn't really useful, as the number images might also increase to a 1000 or more.

UCM 11g hardware recomodations

Hi!
I can't find any hardware recomodations for UCM 11g.
Do you now any datasheets or documentation with hardware informations like in
"Content Server Installation Guide for UNIX" for UCM 10g?
We are going to use solartis.
kind regards
Alex
Edited by: 879801 on 03.10.2011 07:10

I'm afraid there is no simple answer to that. You should start with sizing (how many "license" CPUs you will need). That will correspond to your usage requirements (how many GUI reqs, how many conversion reqs, how many search reqs, etc.). If you have specific reqs in one area (e.g. conversions), you might want to have a special server just for that (WebCenter Conversion Server is enough).
Another question is: how much data you will have? You might have your data just on a harddrive (for VERY small projects) or in a NAS/SAN storage. Here, you will mainly depend on the overall volume and required seek time.
Another question is: do you want to have your database on the same machine, or separate? (I'd recommend a separate machine, even if you store there just metadata).
If all you need is just a single node machine for UCM (J2EE apps) only, you might go with almost any commodity server - have your HW rep recommend something for you. Just make sure it has enough memory (8 GB at least, 16 GB ideal).

UCM 11g gives error while opening systemproperties in production

UCM 11g is giving error while opening systemproperties in production mode, it says root user cannot install it.Please suggest.

do you have any directories owned by root? I've seen some nfs issues change ownership of mounted directories when they're remounted.
is anything in the /bin/ directory owned by root?
I think you should be safe to chown back to your install user.
-ryan

Gett 403 error code when trying to access UCM 11g from Admin console -- deployment

We have deployed UCM 11g in cluster mode. When I test the application via the admin conssole --> deployment --> UCM. I can access UCM only on one member of the cluster. The other member gives me a 403 error code..

Please, take a look at https://blogs.oracle.com/proactivesupportWCC/entry/clustering_and_high_availability_for (and contact the support group as advised)

UCM 11g File missing from search result although file is accessable

When I do search without any criteria in UCM 11g, some files missing from search result although I know the files were checked into UCM already since I'm able to see these files using url similar to:
http://ucm/cs/idcplg?idcService=GET_FILE&dID=12345
or use following url to get document information:
http://ucm/cs/idcplg?idcService=DOC_INFO&dID=12345
the file is not in the search resule even search by ID.
also, the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
Is this a known problem? the same search was working in UCM 10 perfectly.
Thanks

The query seems able to retrieve the missing document. for example, I search by content ID, in the audit log (eanbled as you mentioned) give th efollowing information:
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 --- @ResultSet SearchResults ---
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 numFields=66,*numRows=1*,currentRow=0
also, the infomation following above give the deteail field information which match with the missing document.
I looks like UCM just did not bring it to UI as part of search result.
This seems match with my another finding as I mentioned earlier: the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
it seems query did find the documents but UI did not show it.
Not sure if this is a known bug.

Content migration Stellent 7.5 to UCM 11g | Facing trouble

Hi All,
We are upgrading from Stellent 7.5 to UCM 11g. Stellent 7.5 is on windows 2003 with SQL 2005 database, and UCM 11g is on Linux RHEL 5.6 with Oracle 11g database.
We are using archiver to migrate contents from Stellent to UCM. The import batch program is successfully executing. Below is the process we follow to migrate the contents which are in workflow.
1- Moved folders for migrating user workflow history and states of workflows
     <stellent idc root>\data\workflow to <ucm root>\data\workflow
     <stellent idc root>\data\user\profiles to <ucm root>\data\user\profiles
2- Migrated table data
     - truncating table data, the tables are : Revisions, DocMeta, Documents, DocumentHistory and RevClasses etc
     - Migrating data of these tables from MSSQL to Oracle so that workflow state, document checkout states are also preserved
     - wf_in_queue stores did of content therefore old did (of 7.5) needs to be preserved to show documents lying in user's queue
     - As well as there are some custom tables which are dependent on did.
Now the problem is, the native url of the link is pointing to new did.extention which was generated while content import through archiver. And if we migrate the table data as mentioned above the native url shows the old did.xls but this file doesnot exists in the file system.
Is there any who also faced the same situation?
Or is there a better way of migrating contents from 7.5 to 11g.
Thanks,
Rajiv

There is no supported direct migration path from 7.5 to 11g. The supported migration path is to upgrade the 7.5 instance to 10g, then upgrade the 10g instance to 11g.
I think Tim says it best here.
Changing the UCM Database

Webcenter + UCM 11g

Similar Messages

Maybe you are looking for