WebDAV access from File Manager gone from Belle

The Files (formerly File Manager) app has been stripped of its WebDAV feature.
For me, this is a big inconvenience, as it means that N8, E6, 701 now has no built-in means of exchanging files with our home Synology NAS box. (AFAIK, Belle has no FTP, NFS or AFP client "out of the box" or available in the Store, and I'd have to cough up £3 for MyExplorer to add a Windows file-sharing (SMB) client to N8, E6, 701 etc.)
I don't know if anyone involved with Belle on the Nokia side, reads this forum, but after asking them why they felt they had to remove a genuinely-useful feature, I would plead with them either to restore the WebDAV client functionality to Files, or provide a separate app to enable some kind of file-sharing (WebDAV, SMB, FTP, whatever).
If I have to pay for a third-party client to give me this functionality, no problem, then so be it, but I do have to ask why a 2012 smartphone platform is shipping without a single means of exchanging files over a network (and I don't count USB or Bluetooth file-transfer). For that matter: does anyone know why WebDAV was removed from Files?
Maybe I'm the only user who even noticed that WebDAV was gone, but I just had to "vent" a bit...
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

And this answer I received from th devoloper of myExplorer in March;
Hello!
Unfortunately, myExplorer does not support WebDAV. However you can still connect remotely to your NAS or other file server in two ways:
    A. By forwarding the SMB port in your router.This is easy to setup but it is not very secure. While authentication information (user name and password) is protected, as they are never transmitted unencrypted, the rest of the traffic will go over unsecured connection. Here is what you have to do for this to work:
    1. Forward port 445 (or 139) on the file server (or NAS) in your router to another port (for example 22678 - the number is not important, what is important is to write it down for later).
    2. Create a new network share in myExplorer and type the external IP address of your router in the field "Computer IP address). If your external IP address is dynamic and you are using some kind of dynamic DNS, instead of IP address, please fill the DNS name of the router in the field "Computer DNS name".
    3. Fill in the port number from step 1 in the field "Port number"
    4. Select "Always ask" as access point because you may need to use different access points depending on your current physical location (3G on the road or Wi-Fi in the office, etc.).
    5. Please note that you will have to add exception to your firewall for port 445 or 139 as most firewalls block the ports 445 and 139 when the other IP address is not local. This is true even for the built-in firewall in Windows.
    B. By using VPN network. This method is better from security point of view but it requires more work to setup. First you need to setup a VPN network from your phone to the LAN where the NAS is located. This can be done in few different ways and the concrete steps depend on what kind of VPN you are using. After you have working VPN, all you need to do is this:
    1. Fill in the NetBIOS name or the (local, not external) IP address of the computer.
    2. Select the created VPN access point as the access point for this network share.
    Please note that both methods above require some knowledge about the networks. We are planning to create a tutorial, which explains the needed steps but it is not ready yet.
Best regards!
myExplorer
I wrote; 2 questions,
Can I log in to a nas through webdav and using 3G
Can I have the address as https://mynasserver.no-ip.org:7001 when connecting over 3G. The server don’t have a 192.168.1.1 adress over the webb
Regards
Ztuka
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Similar Messages

Printing from file manager in Solaris 10

Is is possible to print from file manager in Solaris 10, I can print from the command line but not from file manager, when I try there is no output lpstat shows nothing and no error messages. Latest patches are applied as of 14/04/08.
Edited by: its_mallen on Apr 15, 2008 5:37 AM

I've found I can print as root but a user can't, wondering if there are any special privilages, I've found an allow and deny command but they can print from the command line so not sure this will fix the problem

HT4863 In my most recent iOs update...my NOTES file is gone from my email acct. Where did it go?

In my most recent iOs update...my NOTES file is gone from my email acct. Where did it go? and How do I make it visible in my email folder?

Which email account? Your iCloud email account or is this an account from another provider?

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

Howto: Iterate ADF BC from a managed bean from the View?

Hi Everyone,
I've been trying to iterate a BC ADF object from a managed bean from the view layer. Here is what I have done so far, but I don't seem to get any records:
In faces-config.xml, I am passing in the BindingContext to the managed bean. (This is a session scoped bean).
<managed-property>
      <property-name>bindings</property-name>
      <property-class>oracle.adf.model.BindingContext</property-class>
      <value>#{data}</value>
    </managed-property>In the testPageDef.xml I have the executables and bindings setup:
<executables>
    <iterator id="TestRO1Iterator" RangeSize="-1" Binds="TestRO1"
              DataControl="ApplicationControlDataControl"/>
</executables>
<bindings>
    <table id="TestRO1" IterBinding="TestRO1Iterator">
      <AttrNames>
        <Item Value="C1"/>
        <Item Value="C2"/>
      </AttrNames>
    </table>
</bindings>In my managed bean, in addition to the accessors for the bindingContext of bindings, I have:
             BindingContainer bc = getBindings().findBindingContainer("testPageDef");
             ControlBinding cb = bc.getControlBinding("TestRO1");
             RangeBinding rb = (RangeBinding)cb;
             List testList = rb.getRangeSet();
             Iterator testIter = testList.iterator();
             int testCount = testList.size();
             while (testIter.hasNext()) {
               Map attrs = (Map)testIter.next();
               System.out.println(attrs.get("C1")+","+attrs.get("C2"));
               //Do some fancy stuff here with the values.
             }However, my testList.size() always returns 0.
Is this the right method to programatically access the data from the view layer from a managed bean, or have I missed something completely? Are there any working samples that I could take a look at?
Jdev: 10.1.3.1
Thanks!
Kenton

Hi,
<managed-property>
<property-name>bindings</property-name>
<value>#{bindings}</value>
</managed-property>
private BindingContainer bindings= null;
public void setBindings(BindingContainer bc){
bindings = bc;
public BindingContainer getBindingContainer(){
return bindings;
DCIteratorBinding dciter = (DCIteratorBinding ) bc.get("TestRO1Iterator");
RowSetIterator rsi = dciter.getRowSetIterator();
while (rsi.hasNext()){
Row rw = (Row) rsi.next();
//Do some fancy stuff here with the values.
You find several examples in the developer guide and on the Internet
Frank

The waveform of output from file is different from original one

I've a new question about displaying a waveform from a text file. The waveform which its data is from file is different from the original one.
I attached image files which included my two vi files and 3 waveform. In the compressed file, "ReadData_Waveform1.jpg" is a image of waveform from "ReadData.jpg" vi file with the configuration of "Transpose" is True,
"ReadData_Waveform2.jpg" is a image of waveform from "ReadData.jpg" vi file with the configuration of "Transpose" is False,
"WriteData_Waveform.jpg" is a image of waveform from "WriteData.jpg" vi file.
I attached the source file of waveform with text format as well.
Please help me to solve this question if there is anyone who can figure it out.
Thanks, Andy.
Attachments:
Question.zip ‏154 KB
data.txt ‏55 KB

Hi Andy
If you transpose the data when you write it, you also have to transpose it when you read it.
Just have a look at the simple example attached. I write data and read it again. Each file operation is called with the default-value for transpose (false). The data is read correctly.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
data.vi ‏35 KB

Need to deny access to file manager for the user

Hi
I need to be able to deny access to the file manager, as I dont want my client deleting files. however, for some reason I have to allow him access to this as he needs to be able to upload files through InContext Editor (he needs to link pages to documents that are not on the server so he needs to upload them and to do this, I have to grant him access to file manager). How can I get around this? I dont want to have to reupload his site every time he deletes a file....

Unfortunately it can't be done - access to the file manager allows deleting as well as uploading and at this point that cannot be changed.

Can't see files on MAC from File Manager on Passport

Don't know if this is truly a Link issue, but in File Manager on the Passport (both in 10.3.0 and 10.3.1.1581) I have the option of selecting either of my Mac's (both Yosemite, both on the same network) in the device menu. However no amount of waiting ever shows files on the computer.
This is such a great feature it would be great if it worked.
If I create a folder in the Passport on the Mac, I can see that. If I add files to it on the Passport or the Mac I can see them.
I have removed all the folders in Link and re-added them. I initially started with having my Home open, but also tried just Documents folder, or Music. Same result. The only difference is where the test folder is created on the Mac when I add a folder on the Passport.
Are there settings on the Mac to allow this?
Paul
Torch 9810; PlayBook 64g; iPad1 64g; iPad2 64g; iPhone6 64g Passport
Provider Bell (tablets all WiFi)
Solved!
Go to Solution.

Both Macs on Yosemite. Have not been successful at loading on old XP computer as it creates a VPN connection which will not connect to the Internet.
I did notice on the Mac that I now have a new admin user - access-bpf. Don't know what this is I did not add it and I am the administrator. I added it to the file sharing user list with full access, but no difference. So I removed it from the access list - no difference. So I then removed the account - no difference.
Paul
Torch 9810; PlayBook 64g; iPad1 64g; iPad2 64g; iPhone6 64g Passport
Provider Bell (tablets all WiFi)

Is there any downside to using a reference type library if I use Time Capsule and will do file management only from within Aperture?

Have done a lot of reading to get prepared to convert to Aperture 3 and have this question regarding setting up my library type.
I'm not a professional -just a heavy user hobbyist.
It appears that the major factors in using reference style is to backup the images with Time Capsule and always do moves or deletes from within the Aperture application.
If my architecture matters here's what I have that may be involved in photo management and editing:
iMac (latest 27" high power version with lots of memory)
Internal 2TB HD where the library is stored
External (FireWire) 2TB HD where the images are stored
External (FireWire) 6TB HD backup drive
In the future an iPad for remote work on images (when/if available) and a Mac laptop (for same remote use)
I see major downside issues to letting the library manage my files - such as inaccessibility (or awkward accessibility) to the images for other programs, and performance issues when the library gets large (thousands of images or 100+ gb in size)
The chief complaints I've seen regarding using a reference mode is the broken link issues created if file management is done outside of Aperture (adds, deletes, moves of files) and the inability to use the Vault function for backup.
One feature that I imagine I'd like to have is maximum integration with Final Cut Pro X and that's one area I haven't seen much on and would be interested to hear about if that integration is affected with the choice of managed vs referenced library types. (I like to produce film clips that are combinations of pics and video and want to be set up so that is done in the easiest fashion when working in FCP X)
I'm sure I've not seen all sides of this issue and would like to see some discussion around this question.
Thanks to everyone contributing!
Craig

Goody, Goody, you hit a few of my favorite subjects! Herewith some comments, with the usual caveats - true to the best of my knowledge and experience, others may have different results, YMMV, and I could be wrong.
I run Aperture on two machines:
-- 2007 Mac Pro with 2x2.66 GHz Xeon, 21 GB of RAM, a 5770 GPU, and multiple HD. I have about 11,000 images, taking up 150 GB. (Many are 100 MB TIFF, scanned slides)
-- 2006 Mac Book Pro with 1 2.0 GHz Core Duo, 2 GB of RAM and a 240 GB SSD.
Two very different machines.
-- Aperture Libraries are all the same - Managed or Referenced. If Managed, then the Master image files are inside the Package, if Referenced, they are outside, and you can have any combination you want. Managed is easier, but Referenced is not hard if you are the least bit careful.
-- While the sheer size of an Aperture Library is not a big issue, the location on disk of the different components can have a tremendous impact on performance.
-- Solid State Drives (SSD) read and write faster than regular Hard Disks (HD) and, what is more important, empty HD read and write much faster than full HD.
-- Aperture speed requires a combination of RAM, CPU, graphics processing unit (GPU) speed, and disk speed. The more RAM you have, the less paging you will see. With enough RAM, the next bottle neck is CPU (speed and cores) and GPU speed. But even then you will still have to fetch an image (longer if you pull the full resolution Master, read and rewrite the Version file, and update the Preview and Thumbs.
So what works?
-- RAM, RAM, and more RAM. 4 GB will work, but you will page a bit. 8 GB is much faster. On my old MacPro the sweet spot was about 16 GB of RAM.
-- Keep your Library on your fastest (usually internal) drive. Keep that disk as unloaded as possible. How do you keep it unloaded? Either buy BIG, 1 TB+ or move your Masters off onto another disk. The good news here is that as Master files are written only once and never rewritten, speed of this disk, as opposed to the disk that holds the Library, is not important. There is a one second pause as the Master is read into memory and, if you have enough RAM, that is it - the Master will never be paged out. If, on the other hand, you do not have enough RAM, and you do a lot of adjusting at full resolution, then the speed of the disk that holds your Masters will become very important due to paging.
-- I found that I picked up a tiny bit of speed by keeping the Masters on a dedicated disk. Thus, in your configuration, if you can dedicate that 2 TB FW HD to your Masters, you should see very nice performance.
Final notes on backups and archives:
-- One conventional wisdom is that you should make an archive copy of every image file before or as you load them into your system. (Aperture in this case.) This archive is then never touched or deleted.
-- An alternative approach is that you do not keep such an archive, but only the images that you have in your Aperture Library. And when you delete from the Library, you no longer keep a copy anywhere.
I do the following:
-- Card to Aperture. Card is then kept at least 24 hours until all of my backups have run. (I use three - Time Machine, Clone, and off site.)
-- I do not keep archive copies. If I decide to delete a file, my only recourse is to recover it from Time Machine during the six month cycle of my Time Machine backups. Thereafter, it is lost.
There are merits to both approaches.
Hope this is clear, correct, and responsive to your needs.
DiploStrat

File deleted from file manager

By mistake I deleted a file from phone memory in the file manager. Is to important to have all the orgianal files in the file manager or do I reload the software. What do I do. i have a E 7.

Is this a personal data file you deleted (e.g. a text file, picture, etc.) or just some random Nokia file? If it's the latter, do you remember the name or location of the file? (Nokia's File Manager gives you access to only a small subset of the data on the phone, making it generally very safe.) If your phone still works normally, I wouldn't worry about the loss. I have never used an E7, but the phone memory on my E73 contains only a few log files and remnants of system .sis files that my phone will never miss.
If you've accidentally deleted a personal file from the phone memory and don't have a backup, then you may be out of luck. I am not aware of a "file undelete" utility for Nokia phones.
Hope that helps!

Arching of files is gone from the downloads and documents folder

The arching list of files is gone when rolling over the downloads and documents folder. I removed the downloads folder by accident yesterday from the dock. Once I found it, I replaced it back on the dock and now the arching of files is gone on both folders. I have them as lists by date. I have restarted my MacBook Pro several times, clicked on the dock and properties and nothing seems to work. Does anyone know how to get it back? Are there any settings that I am missing?. Thanks!

Right click on the folder in the Dock (or hold down the Control key and click on it if you have a one-button mouse), and choose "Stack" under the "Display as" section, and "Fan" under the "View content as" section in the resultant contextual menu. You can also choose how they are sorted from this menu as well.
Message was edited by: Dan Parnell

I deleated numbers and pages files and apps on my iPhone and when I got to work all my files were gone from numbers and pages on my iPad. How do I get those files back on my iPad?

My storage was getting low on my iCloud, so I decided to delete my files from numbers and pages on my iPhone and delete the apps on my phone because i did not really use it on my phone. When I got to work and clicked on pages and numbers on my iPad the files were gone. I assume the files were deleted through iCloud. I did not want the files deleted on the iPad and would like to know how to get them back?

If you also backed up to your computer - you can restore from that backup - to retrieve the files. As far as I know- that should have no bearing on deleting them from iCloud - they should still be in that backup.
If you used iOS file sharing with your computer - and saved the files to your computer - you can retrieve them from there.
if the only place that the files were saved to was iCloud, I know of no way to get them back.

Viewing images from file manager in C5-00.

When I open an image in file manager it does not open. An image viewer opens but does not display the image. Then I've to restart the phone to get rid of image viewer from open apps. Does anyone has the same problem? Any solutions? Firmware version: 071.005

Does any image cause this (including camera pictures), or just some? Do the images display normally in Gallery? What about images stored on the phone (temporarily change the camera's memory setting and snap a photo) vs. on the memory card? For this test, you may want to temporarily remove the memory card.
I am hoping you'll find that images stored on the phone display everywhere 100% normally, which would mean some corruption on the card. If so, back up any important card data, connect the phone to a computer with USB and Mass Storage mode (or use a separate card reader), and check the card for errors in the same way you would check the hard drive. If the computer can find and fix the problems, then hopefully the issues are solved. If not, you may need to reformat the card (as FAT32). Worst case scenario is that the card could be going bad. I hope that helps!

HT1386 Accessing mp3 files I syned from PC to my IPad

Hi, I am trying to access the mp3 files I synced from my PC to my IPad 2, but I can't see them there. (the tabs in the "music" section only refer to content I can buy, not mine. I can see my content in ITunes on my PC - please can you help? thanks a lot in advance.

Hi Johnathan, thank you, however, my music app shows "empty".
I guess there is something else I need to do, but don't know.

Access pages files in icloud from macbook

How do I access icloud files from my macbook

To access pages files on your mac that were created on an iOS device, you need to navigate to icloud.com on your web browser, open the iWork section, locate the documents and download them to your computer.
If you then edit them on your computer and wish to put them back into iCloud, you must do this by dragging the documents back onto the iCloud pages section.

WebDAV access from File Manager gone from Belle

Similar Messages

Maybe you are looking for