WebDav does not work while SSO is turned on.

We are using UCM 10gR3,and Oracle db 10gR2 with OHS 10.1.3 in a linux env.
Webdav was working fine earlier with stellent native authentication.
Recently we integrated Oracle Single Sign On. SSO works fine. But while SSO is turned on we are not able to access webdav.
Please advise how we can resolve this issue.
Regards,
Debasis
Mob: +919886712043

sounds like a bug... WebDAV needs a special cookie to be set so it can identify the users. It appears that whatever SSO integration you're using is not setting this cookie correctly, or maybe not at all.
You should probably contact Oracle support...

Similar Messages

My button does not work is that to turn my ipod works and my ipod is block is an apple with a loading baarre how do I restore it?

my button does not work is that to turn my ipod works and my ipod is block is an apple with a loading baarre how do i restore it ? please help me

Try:
- iOS: Not responding or does not turn on
Where it says place the iPod in recovery mode use this program vice the iPod's buttons
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Iphone 5c clock does not work while asleep

done hard reset updated on and off set automatically time but it works while the device is in use

iphone 5c clock does not work while asleep
I have to ask how you know... does it show the right time before you go to sleep? When you wake up?

My autofill does not work while using Safari. Have checked both Safari and Apple settings.

My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.

Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.

My up button for volume does not work and need to turn incoming call volume up. is there an app to do this

my up volume button does not work and i need to turn the incall volume up. is there an app that does this?

Hey skeith75,
Thanks for the question. Based on the information you have provided, your iPhone may need to be serviced to fix that button. However, if in the meantime you would like a workaround for turning the volume up on a phone call, you can use Assistive Touch:
iOS: Using AssistiveTouch
http://support.apple.com/kb/HT5587
If you do wish to service your iPhone, the following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M.

Cancel button functionality does not work--- while searching for G/l Acc

HI SAP SRM Gurus,
This is regarding an issue faced by the end user.
For information my client is on WAS 6.4 Patch Level 155, SRM 4.0, EBP 5.0, SRM Server 5.0.
In account assignment details..while searching for G/l account for the Account Assignment used at the time of creation of the shopping cart, if no G/l account is found, the Cancel button functionality provided, does not work, however when
G/l account(s) is/are found, then the Cancel button functionality
works properly.
Kindly assist.
Awaiting your reply in this regard.
Thanks in advance
Ankur

Hi,
Sound like a bug.
Did you open an OSS ticket ?
Kind regards,
Yann

Em.merge does not work while em.persist does?

Hello,
I have a stateless session bean with code snippets below.
    @PersistenceContext
    private EntityManager em;
    public void setList(ContainerList list, int key) {
        ContainerList stored = (ContainerList)em.find(ContainerList.class, key);
        list.setId(key);
        if (stored == null) { em.persist(list); }
        else {
            em.merge(list); // 1st alternative
//            stored.copy(list); // 2nd alternative
...When I call the method setList for a non existing key, the entity is stored in the database. When I call the method for an existing key, the old value is not updated by the new, i.e. the merge method has no effect. If I comment out the 2nd alternative, it has no effect either. Does anyone has an idea why this does not work? I am using Netbeans 5.5 and 5.5.1 release candidate 1. (With the included application server.)

Hello,
I will try to summarise my knowledge of the JAVA persistence API as the documentation is not always clear and may be misleading.
In SQL you have 4 main statements: INSERT, SELECT, UPDATE and DELETE.
with
@PersistenceContext
private EntityManager em;some documentation appears to make the following associations:
em.persist(Object entity) -> INSERT
em.find(Class entityClass, Object primaryKey) -> SELECT
em.merge(Object entity) -> UPDATE
em.remove(Object entity) -> REMOVE
However, practice shows that this is NOT the case!
em.merge(Object entity) does exactly the same thing as em.find(Class entityClass, Object primaryKey)! The only difference is that the em.merge(Object entity) method takes a detached object of the entity class as argument with the same primary key as the attached object you are loading.
Detached objects are objects of the entity class the database manager is not aware of. Attached objects are objects in the database and are managed by the persistence context. Every newly created object of an entity class is detached. You can attach them to the database with the em.persist(Object entity) method call. Attached objects can be retrieved with the em.find(Class entityClass, Object primaryKey) or with the em.merge(Object entity) method. All changes made to attached objects are automatically stored in the database. There thus is no explicit method for the UPDATE statement. You just make changes to attached objects and the entity manager copies the changes to the database (at the end of the persistence context). An easy way to make all the changes you need at once is to have a detached object that contains the right values and then copy all these values to the associated attached object with a self defined copy method in the entity class as in
   Entity detached;
// --> begin persistence context
   Entity attached = em.merge(detached);
   attached.copy(detached);
// <-- end persistence contextIf you are working with session beans, the persistence context standard begins with the beginning of a transaction and ends with the end of a transaction. A transaction standard begins with the start of a session bean method and ends with the session bean method. If you choose to, you can make the persistence context of type extended with
@PersistenceContext(type=PersistenceContextType.EXTENDED)
private EntityManager em;In this case, the persistence context ends when the session bean is removed from the EJB container. (Can be useful to keep attached entities in the state of an stateful session bean.)
Without session beans, you have to declare explicitely the start and end of a persistence context or transaction, but I refer to existing documentation for this, as I do not actively know how to handle things without session beans.
Finally, the methods em.persist(Object entity) and em.merge(Object entity) use a detached object as argument, while em.remove(Object entity) uses an attached object as argument (using a detached object results in an Exception thrown).
I hope this makes some things clear

Inbound Delivery quantity tolerance does not work while receiving goodsLM01

Hi Friends,
Please help me in filding solution to the below issue.
A PO created with 100 quantity having tolerance limit of 25 %. A corresponding inbound delivery document created
against the PO for 110 quantity. Now user wants to receiving the actual quantity i.e 120. While receiving system throws an error
"Maximum open quantity 110 can be packed". I provided a solution that the user need to change the delivery quantity from 110 to 120 and than do the GR using LM01. User does not agree to do it as the inbound delivery document created automatically through
SNC system. User want to make it automation like the inbound delivery document tolerance % should work for the difference quantity between inbound delivery quantity and actual goods receipt quantity.
Thanks in Advance. Any solution highly appreciated.
Thanks
Santosh

LM01 is a dynamic screen which is easily configurable with simple logic and coding. I'm not sure whether any standard configuration to activate the message for LM01.
But how it works for us. We've defined the messages for tolerance "Entered Quantity 1200 Plus previous received
quantity 0 is greater than over delivery tolerance 3.0% " in message class. And system pulls all the messages related to LM01 from this message class. Check with your developer how your LM01 is customized. They can help you.

Safari 5.1 does not work, while other browsers do

Hi all,
My Safari 5.1 browser does not seem to work. It opens, loads for 1/4 and stays there. Not a single page can be opened, even after amtoying the cache.
Other browsers, such as Chrome and Firefox have no trouble funcioning as well. What might be a solution?
Thanks!

The Spotlight menu, the little magnifying glass in the upper right corner when clicked will reveal a search field, and if it is indexing, it will tell you. Otherwise all you see is a search field, and sometimes results. Indexing is what allows it to know every word in every file on the hard drive, and what to search for. Safari, being an integral part of the operating system, uses some of the indexed values from Spotlight for its operation. If that index is corrupted, it might need to be reindexed to function. If you use any tools that clean system cache that can also affect Safari and other Apple applications. Those tools should only be used for troubleshooting a backed up system. So the first thing we have to discover is, is your data backed up? Because then we can suggest methods for detecting what caused corruption. Obviously you have enough disk space.

Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

Hello,
on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
Thank you for your help

Hi,
Thank you for posting in Windows Server Forum.
By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again. In addition you can try running below command and check
the result.
Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
More information:
Powershell to update "RemoteApp and Desktop Connections"
If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
Security Context” for more details.
Hope it helps!
Thanks,
Dharmesh

'New Window' does not work while generating HTMLhelp

Hi team,
I have created a RoboHelp project and assigned the property 'Open in a New Window' for a particular page.
When I generate HTMLhelp format, and I click on the page, it opens in the same frame, but does not open in a new window.
However, this feature works fine when I generate Webhelp.
Is there any workaround?
Any assistance will be appreciated!!!
Santosh.

Hi Thomas,
thanks for the hint, it helped the find the source of the problem.
Our Portal Framework is highliy modified - actually it is more a own developed Framework than a modification to the SAP Standard framework.
Opening the WebDynpro in a new window with the SAP Standard Framework does work perfectly. With the own developed Framework, the system behaviour is like described in my original post.
Thus back to the roots: We have to check our portal framework again :-(.
Thanks for your help.
Cheers,
Stepahn

DHCP does not work while connected to TC throuh ethernet

I currently have a WRT54G router and a time Capsule. The WRT is connected to a cable modem, and the Time Capsule is connected to the router through a LAN port. The WRT assigns addresses in the range of 192.168.15.90 to .99 and the TC assigns addresses between 192.168.15.100 to .109. Connecting to the TC's wireless network works, but connecting to the TC or the router through an ethernet cable does not give an address. I have tried doing DHCP just on the router, just on the TC, and on both, and nothing seems to work, except a wireless connection. Is there a way to fix this?

Have you set up Connection Sharing to "Bridge Mode"?

After ios 7 update, my find my friends 'alert sound' does not work. Can I turn it back on?

When I set it to alert when person leaves a location, it show on display but the usual alert SOUND does not go off.

Nope I mean the red circle symbol it's iTunes

HT4972 ipad used to work fine with wifi Vizio. now the connection does not work while other lap tops and Ipods in the house work fine with wifi. any suggestions to solve this please

Any suggestions please on how to recover connection of ipad2 to Vizio wifi? (it worked fine in the last few months but the connection no longer exist although other laptops continue to have wifi connection to the same Vizio router.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

3g does not work while WiFi says not connected

You would think that if WiFi was "not connected" >< it would automatically switch to the 3G connection. But it never ever ever ever works unless I turn the WiFi off. Then it works fine. The WiFi works fine when I am in range of hotspots/home access points FYI.
Basically it is extremely annoying. Anyone else experience this?
I have the Regular 3G from 2008.

"Not connected" doesn't necessarily mean not connected. You can be connected to a Wi-Fi network, in which case you'd see the Wi-Fi icon, but not have the proper login/proxy to access the internet via the Wi-Fi network you are connected to. So, you are 'connected' to the Wi-Fi network, but not connected to the internet.
If you have previously joined 'common' networks (e.g. HPsetup, etc.), your iPhone may automatically connect to them, even though you cannot use them.

WebDav does not work while SSO is turned on.

Similar Messages

Maybe you are looking for