WebDAV error when doing a client push ConfigMgr 2012 R2

Hi everyone, I am getting an error message when doing a client push, only on some DPs.
Here is the setup:
ConfigMgr 2012 R2 on Server 2012 R2.
DP are on Server 2008 R2 (for the most part).
DP are installed using the exact same way, adding the Primary Site Server to the local Admins group, then using the console to install the role, selecting BranchCache and Configure IIS.
No PXE.
Boundary groups are configured as appropriate.
When initiating a client push the following errors are displayed in the CCMSetup.log:
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
Failed to check url http://DPServerName.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
GET 'HTTP://MPServerName.com/CCM_Client/ccmsetup.cab'
The installation is done but yet again, no local DP are used.
The same scenario is actually working on other DP that was configured using the same exact way.
Servers where not new installation and where used for other things:
MDT Deployment Share with PXE.
Other share.
As far as I can tell, IIS is well configured as I am able to deploy any other software on clients and they are using the local DP. Only the client installation is causing problem.
Anyone have any idea?
There is a lot of post about a similar problem on ConfigMgr 2007 but all solution are to configure WebDAV, which is not configured in ConfigMgr 2012.
Thank you guys for any tip and/or help!
Mathieu

You are right about the log, here is a longer snippet of it:
==========[ ccmsetup started in process 5980 ]========== ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Running on platform X86 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Launch from folder C:\Windows\ccmsetup\ ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
CcmSetup version: 5.0.7958.1501 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
In ServiceMain ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Running on 'Microsoft Windows 7 Professionnel ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
SslState value: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPPORT: 80 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSPORT: 443 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSSTATE: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSCERTNAME: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
FSP: ServerSCCMPSS.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMFIRSTCERT: 1 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Retry time: 10 minute(s) ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI properties: INSTALL="ALL" SMSSITECODE="S01" FSP="ServerSCCMPSS.Test.com" SMSCACHEFLAGS="PERCENTFREEDISKSPACE" SMSCACHESIZE="20" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Source List: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmmp.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmpss.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\dcsspsccmmpdff.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMMP.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMPSS.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\DCSSPSCCMMPDFF.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MPs: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmmp.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmpss.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
dcsspsccmmpdff.test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
No version of the client is currently detected. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Updated security on object C:\Windows\ccmsetup\. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Sending Fallback Status Point message to 'ServerSCCMPSS.Test.com', STATEID='100'. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Params to send FSP message '5.0.7958.1501 Deployment ' ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
State message with TopicType 800 and TopicId {40FD8A62-3E9A-41FB-8698-E9A6658A4A91} has been sent to the FSP FSPStateMessage 2015-03-25 23:12:12 4536 (0x11B8)
Running as user "Système" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Detected 206206 MB free disk space on system drive. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Checking Write Filter Status. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=S01))' ccmsetup 2015-03-25 23:12:13 4536 (0x11B8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>S01</RootSiteCode><CCM> <CommandLine>SMSSITECODE=S01 FSP=Serversccmpss.Test.com SMSCACHEFLAGS=PERCENTFREEDISKSPACE SMSCACHESIZE=20</CommandLine> </CCM><FSP> <FSPServer>Serversccmpss.Test.com</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="Test.com" /><Forest Value="Test.com" /></ClientOperationalSettings>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmpss.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmpss.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmmp.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmmp.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'dcsspsccmmpdff.test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'dcsspsccmmpdff.test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrieved 3 MP records from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrived site version '5.00.7958.1000' from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteCode: S01 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteVersion: 5.00.7958.1000 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for a valid online MP... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Checking the URL 'HTTP://Serversccmpss.Test.com:80/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'HTTP://Serversccmpss.Test.com:80/CCM_Client' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found a valid online MP 'Serversccmpss.Test.com'. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for DP locations from MP(s)... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Current AD site of machine is CDL LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Local Machine is joined to an AD domain LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Current AD forest name is Test.com, domain name is Test.com LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Begin checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Finished checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Adapter {72FC011A-9993-4CBD-B7B2-D1D56FD38711} is DHCP enabled. Checking quarantine status. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="S01"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="CDL"/>
<Forest Name="Test.com"/>
<Domain Name="Test.com"/>
<IPAddresses>
<IPAddress SubnetAddress="172.16.64.0" Address="172.16.65.9"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{B9F091E1-649D-47C4-A0AD-19508435F962}</ID><SourceHost>C006235</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:C006235:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>Serversccmpss.Test.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
CCM_POST 'HTTP://Serversccmpss.Test.com/ccm_system/request' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received header '<Msg SchemaVersion="1.1">
<ID>{336667CB-2AF5-4B7D-9B1B-3B9A39777034}</ID>
<SourceID>GUID:8BB44537-8D62-4751-9114-1F5527EE800F</SourceID>
<SourceHost>ServerSCCMPSS</SourceHost>
<TargetAddress>direct:C006235:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<ReplyCapabilities><AllowRegistrationReset>direct:ServerSCCMPSS:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>C006235</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="2574"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">ServerSCCMPSS;Serversccmpss.Test.com;</Property><Property Name="MPSiteCode">S01</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003" Signature="http://CDLGHOST.Test.com/SMS_DP_SMSSIG$/S0100003"/><ADSite Name="CDL"/><IPSubnets><IPSubnet Address="172.16.64.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>CDLGHOST.Test.com</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL"/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="S0100003" FullPackageVersion="7" FullPackageHash="CE8C259380667F5687A01FA5365B2D2D1236BA9FC1AD4696A54D914B919D294D" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30416572;2153570688" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found local location 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Discovered 1 local DP locations. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Got 401 challenge Retrying with Windows Auth... ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to check url http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005 ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
GET 'HTTP://Serversccmpss.Test.com/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully loaded ccmsetup manifest file. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1501' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vcredist_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vcredist_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vc50727_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vc50727_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item
I did double checked with a friend about my configuration and everything, just to make sure, and everything seems to be right.
As for the use of account used to get the client, a domain join computer will not need to us the network access account if the DP is in the same domain and the same exact config on other servers is working like a charm deploying the client, same
security and configuration.
All default IIS security and share permission.
Thank you guys for your suggestion and help. 
Mat

Similar Messages

  • Error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3

    Hi all,
    I'm new with Oracle community so I hope you guys can help me and give me some suggestion with my case.
    I got an error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
    I tried many times but can’t do upgrade successfully
    This the error message I got when doing the job:
    [ http://picasaweb.google.com/hoagao84/Oracle#5443442931867670386]
    Appreciate your help.
    Log files:
    Command arguments are: apply
    OPatch version is: 1.0.0.0.48
    Using ORACLE_HOME/oui to look up oui libs...
    Oracle Home = d:\oracle\ora92
    Location of Oracle Inventory = D:\oracle\ora92\inventory
    Oracle Universal Installer shared library = D:\oracle\ora92\oui\lib\win32\oraInstaller.dll
    Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
    Location of Oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\oracle\ora92\oui
    Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    Checking if this is a RAC system...
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;.:D:\oracle\ora92\jlib\srvm.jar" opatch/O2O "d:\oracle\ora92" "D:\oracle\ora92\oui" opatch.pl 1.0.0.0.48"
    Result:
    output to OPatch:
    IS_CLUSTER=0
    CHECK_CLUSTER=1
    NODE_LIST=NULL
    NODE_COUNT=0
    LOCAL_NODE=NULL
    IS_CFS=0
    RAC_CODE=0
    HOME_INDEX=1
    This is not a RAC system
    Interim Patch ID: 3738339
    Checking the patch inventory.
    Component Name: oracle.rdbms
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.rdbms_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.oracore_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.xdk_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.dbjava_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.java.javavm.javatools
    Component Version: 9.2.0.5.0
    Component Name: oracle.cartridges.context
    Component Version: 9.2.0.5.0
    Component Name: oracle.cartridges.locator
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.net_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.ldap_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.emprod.oemagent.base_oemagent
    Component Version: 9.2.0.5.0
    Component Name: oracle.isearch.is_common
    Component Version: 9.2.0.5.0
    Component Name: oracle.options.olap.cwmlite
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.nlsrtl_rsf
    Component Version: 9.2.0.5.0
    Bugs fixed by this patch 3738339:
    3741539 : LOGICAL STANDBY FAILS ORA-1422 MERGING PARTITIONS WITH LOB COLUMN
    2800494 : KCBZIB XHINT FORCES SINGLE BLOCK READS INADVERTENTLY FOR SINGLE INSTANCE
    3239873 : EXTREMELY HIGH PARSING TIMES WITH AND BETWEEN IN ORACLE 9.2.0
    2918138 : ORA-600 (KOHDTF048) WHEN USING PIPELINED PL/SQL TABLE FUNCTIONS
    3575743 : 2004-S144E
    3554319 : APPSST; ORA-00600 [KQLUDP2] RUN DURING APPS UPGRADE
    3666502 : ORA-00600 [1236] RANDOMLY OCCURING
    3752406 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5 FOR BUGS LISTED BELOW
    3528282 : 2004S075E
    3412818 : REPEATED MESSAGES IN LGWR TRACE
    2690205 : 2003-S190E
    3543125 : 2004-S089E
    3571233 : 2004-S141E
    3458446 : 2004S059E
    2810394 : LNXN2PD RETURNS SCALE OF 42 WHEN COVERTING ORACLE NUMBER 0. TO PACKED
    3323435 : 2003-S126E
    3356103 : ORA-600 [OPIBND0; OACCSID] IN PARALLEL QUERY SERVER P001 EXECUTING OLAP QUERY
    3668224 : CBO CALCULATE LOWER CMPTD CDN AND LEADS TO BAD EXECUTION PLAN.
    3492040 : ORA-600 [KGHFRF1] SELECTING FROM V$LOGMNR_CONTENTS
    3150750 : SM; (DBMS_STATS/AUTO_SAMPLE_SIZE) ESTIMATED NDV IS WRONG WITH HIGH SKEWS
    3566469 : 2004-S138E
    3320622 : 2003-S191E
    3749394 : SCORE() FOR FUZZY TEXT OPERATOR DIFFERENT FOR FUNCTIONAL VERSUS INDEX ACCESS
    3609791 : PSR 9.2.0.5.0 BREAKS CALL DB2 STORED PROCEDURE WITH DECIMAL PARM. SQLCODE -310
    3698501 : CGS/IMR GENERATES SAME SEQ/INCARNATION NUMBER AFTER RECONFIG
    3668572 : ORA-979 WHEN CURSOR_SHARING=FORCE OR SIMILAR
    3179637 : UNABLE TO CREATE AN ORACLECONTEXT ON AD UNDER A CHILD DOMAIN
    3571226 : 2004-S140E
    3240280 : JOBS SUDDENLY STOP ALTHOUGH NEXT_DATE <= SYSDATE
    2964252 : LPX-00252 WHEN PARSING VALID XML / DTD FILE
    3617519 : TRANSFORMATION FAILING WITH ORA-932 INCONSISTENT DATATYPE
    3172282 : ORACLE CORE DUMPS WHEN TRY TO LIST ALL ACES FOR A SPECIFIC ACL
    3637624 : WRONG RESULTS WITH DISTINCT COUNT AND UNNESTED EXISTS SUBQUERY
    3542588 : SAME EVENT 38041 USED FOR BUG FIXES 3444115 AND 3131551
    3358490 : ORA-00600 [KQSCCCK;1],[],[],[],[],[],[],[]
    3177513 : WRONG PLAN - JOIN NOT AVOIDED USING BITMAP JOIN INDEX IF UNIQUE INDEX TOO
    3509265 : SHUTDOWN DID NOT COMPLETE WITH WAITING FOR INSTANCES TO LEAVE; 2
    3516951 : BAD EXECUTION PLAN WITH MERGE JOIN CARTESIAN IN TEMP TABLE
    2954891 : ORA-600 KJMXMPM;DIFFUS], [990307644], [990307644], [3304659678]
    3388633 : LOGICAL STANDBY APPLY STOPPED WITH ORA-00600; [17090]
    3371796 : EXPLAIN PLAN HANGS ON KKORMINL
    3622875 : ORA-1499 AND ANALYZE TABLE VALIDATE STRUCTURE CASCADE ONLINE
    3412136 : BAD EXECUTION WITH MERGE JOIN CARTESIAN IN ORACLE 9.2.0.4 AND MERGEFIX 3363655
    3540576 : 2004-S083E
    3575747 : 2004-S145E
    3566813 : CTAS WITH UNION ALL AND ORDER BY RESULTS IN ORA-3113
    3811906 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5
    2824035 : FXD; ORA-22921 CAUSING 4 DIFS IN LRGXG2.
    3354470 : 2003-S195E
    3518909 : UGA MEMORY NOT RELEASED AFTER USING XMLPARSER
    3617042 : BAD PLAN FOR SCH-XMLTYPE BASED WITH COLLECTIONS MAPPED TO OCT
    3583686 : MEMORY ALLOCATION ERROR DURING SPATIAL QUERY
    3597640 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5.0
    3559212 : WRONG RESULTS RETURNED WITH 9.2.0.4 AND CBO
    3625370 : CGS/IMR RECONFIGURATION GOT HUNG DURING A NEW MEMBER JOINING
    3475932 : CROSS INSTANCE ARCHIVE LOG NOT GENERATED REMOTELY
    3635177 : PSRC; ORA-7445 [KXCCUIN] POSSIBLE FROM DML
    3430832 : ORA-600 [25012] AFTER CREATE OF INDEX ONLINE PARALLEL ON PART TABLE
    2338704 : FXD; 1; QUERIES ON COLLECTIONS STORED IN OUT-OF-LINE TABLES ARE NOT VIEW MERGED
    3253770 : 9I-GSI-CRITICAL PROGRAMS TIME OUT WAITING FOR LIBRARY CACHE PIN
    Reading patch XML files and doing sanity checks.
    Read the command to action file map.
    Performing initial safety check.
    Checking active processes:
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "D:\oracle\ora92\oui" "d:\oracle\ora92" opatch.pl 1.0.0.0.48 3738339 "3253770 2338704 3430832 3635177 3475932 3625370 3559212 3597640 3583686 3617042 3518909 3354470 2824035 3811906 3566813 3575747 3540576 3412136 3622875 3371796 3388633 2954891 3516951 3509265 3177513 3358490 3542588 3637624 3172282 3617519 2964252 3240280 3571226 3179637 3668572 3698501 3609791 3749394 3320622 3566469 3150750 3492040 3668224 3356103 3323435 2810394 3458446 3571233 3543125 2690205 3412818 3528282 3752406 3666502 3554319 3575743 2918138 3239873 2800494 3741539 " C:\TEMP\patch92053\3738339\etc\config\actions"
    Result:
    d:\oracle\ora92\opatch\opatch.pl version: 1.0.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
    Error in executing Java program to check conflict
    ERROR: OPatch failed during pre-reqs check.

    This is all the message when I run command in CMD prompt.
    C:\temp\patch92053\3738339\perl d:\oracle\ora92\opatch\opatch.pl apply
    Opatch Version 1.0.0.0.48
    Perl Version 5.008007
    Oracle Home = d:\oracle\ora92
    Location of Oracle Inventory = D:\oracle\ora92\inventory
    Oracle Universal Installer shared library = D:\Oracle\ora92\oui\lib\win32\oraInstaller.dll
    Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
    Location of oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\Oracle\ora92\oui
    Require Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    The filename, directory name, or volume label syntax is incorrect.
    D:\oracle\ora92\opatch\opatch.pl version 1.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved
    Error in executing Java program to check conflict
    Error: Opatch failed during pre-reqs check.

  • Corba error when running rich clients in 3-tier mode.

    Hello
    I am dealing with an Error when running Rich Clients (WebI and DeskI) with 3-tier ODBC connection to the server.
    The client does come up and I'm able to create the query but when the data in refreshed I do get the error:
    A database error occured. The database error text is: (CS) "CORBA Initialization failed". (WIS 10901).
    I have a test server which I'm able to do this kind of connection without a problem but when I try to connect to the Prod server in 3-tier data connection mode throught the server I get this error.
    My setup is:
    BO XI R 3.1 FP. 2.1
    Clients are also updated with FP 2.1
    The data sources are Oracle and Teradata.
    Best regards,
    Hjortur.

    Hi Guys,
    I am facing same error when I run the report from CMC. Error is like u201CThe database error text is: (CORBA) "Error on Executeu201D. (WIS 10901)u201DEven I have re-started the connection server but bad luck.
    I would like to appreciate if someone help me out for the same.
    Thanks in advance..!!
    Thanks & Regards,
    Keyur Modi | Functional Consultant Enterprise Solutions
    TATA Technologies, Pune
    m: +91-9769855899
    website: www.tatatechnologies.com

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

  • [svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

    Revision: 21394
    Revision: 21394
    Author:   [email protected]
    Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
    Log Message:
    bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
    get the sessions id before we invalidate the duplicate session.
    Checkintests pass
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

    For our profect I think this issue was caused as follows:
    Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
    This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html  two remote calls arriving before a session is created will cause 2 sessions to be created.
    Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
    Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! )  caused the error when activated after a few hours.
    I guess the session expires on the server and the error above occurs on activation.
    So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
    All duplicate http errors are silently caught and reported.
    Fingers crossed we won't get any more!

  • TS1702 I got this error when doing a restore

    I got this error when doing a restore and the restrictions were turned on .  I disabled restrictions and the restore was able to complete.

    The error in itunes had a link to http://support.apple.com/kb/TS1702.  I placed this message here for anyone that might navigate to the same message and would hopefully find this.  Yes turning off restrictions allowed the restore to complete and everyone is now happy.

  • -t2cGetCharSet error when using thick client with 1.0.0.15.57

    I think I have found a bug in 1.0.0.15 related to accessing a database using the thick client. I have tested this with 1.0.0.14 release of SQLDeveloper and that version DOES work OK.
    Simply put, I try connecting to a database using the 10g Client on Windows XP and I get "Failure: -t2cGetCharSet" error when running 1.0.0.15.57. I must use 10g thick client so that I can use encyption between the client and the database. 9i thick client doesn't work between Windows and Linux when using encryption. Also, instant client isn't an option; it doesn't support Advanced Security Option (encryption).
    I DID test without encryption enabled to eliminate that as a possible cause and the results were the same.
    If need be, I could back down to 1.0.0.14, but I would prefer not to.

    See:
    Re: TNS Connection Issues
    Raptor does not find My tnsnames
    If don't to solve your problem, let us to know.

  • Error when doing importing with impdp

    Hi,
    I tried to do export then import the schema from and to same schema. However, when doing export with expdp everything was okay.
    Problem begins when I tried to do importing by using impdp. I also tried to drop the current schema and created the new one but it still doesn't work.
    If I didn't drop the current schema, it logs looks like this
    Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
    ORA-31684: Object type SEQUENCE:"HSS"."LCM-MIGRATION_ID-SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."WKS_IDENTITY_SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_RESOURCE_SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_LEASE_OWNER_SEQ" already exists
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    ORA-39151: Table "HSS"."HSS_COMPONENT" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_LINKS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_PROPERTY_VALUES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_TIERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."ESS_CLUSTER_SERVER_MAPPING" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_TYPES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_IDENTITY" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_GROUP_MEMBERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_USERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    Job "HSS"."SYS_IMPORT_FULL_01" completed with 95 error(s) at 08:47:21
    And then this is the log when doing importing, I only highlighted the necessary part which I think related with my problem
    Starting "HYPSS"."SYS_IMPORT_FULL_01": HYPSS/******** TRANSFORM=oid:n:type directory=test_dir logfile=imptest.log dumpfile=HYPSS.dmp
    Processing object type SCHEMA_EXPORT/USER
    ORA-31684: Object type USER:"HYPSS" already exists
    . . imported "HYPSS"."CSS_ROLE_LOCALES" 1.630 MB 6358 rows
    . . imported "HYPSS"."HSS_COMPONENT_FILES" 601.5 KB 33 rows
    . . imported "HYPSS"."HSS_COMPONENT_PROPERTY_VALUES" 130.7 KB 1657 rows
    . . imported "HYPSS"."CES_APPS" 10.54 KB 1 rows
    etc....
    Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39083: Object type INDEX_STATISTICS failed to create with error:
    ORA-01403: no data found
    ORA-01403: no data found
    Failing sql is:
    DECLARE I_N VARCHAR2(60); I_O VARCHAR2(60); c DBMS_METADATA.T_VAR_COLL; df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS"; c(1) := 'TRIGGER_NAME'; c(2) := 'TRIGGER_GROUP'; DBMS_METADATA.GET_STAT_INDNAME('HYPSS','QRTZ_TRIGGERS',c,2,i_o,i_n); INSERT INTO "SYS"."IMPDP_STATS" (type,version,flags,c1,c2,c3,c5,n1,n2,n3,n4,n5,n6,n7,n8,n
    Processing object type SCHEMA_EXPORT/TABLE/COMMENT
    The source schema is on USERS tablespace (default). The destination schema I tried to put on the same tablespace but it doesn't work. However when I changed the destination tablespace, it also doesn't work.
    Anybody got the idea why this occurs? Thanks.

    got error like this
    ORA-39152: Table "HSS"."CSS_GROUP_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_USERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_DELEGATED_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLE_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLE_LOCALES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_GROUPS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-00001: unique constraint (HSS.COMPONENT_LINKS_PK_IND) violated
    ORA-31693: Table data object "HSS"."HSS_COMPONENT_TYPES" failed to load/unload and is being skipped due to error:
    ORA-00001: unique constraint (HSS.COMPONENT_TYPES_PK_IND) violated
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists

  • Runtime Error when doing a Network migration

    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

    Actually it also happens when I don't do a network migration. I choose -
    create - and it errored when I choose Current User.
    >>> Kevin VanSchepen<[email protected]> 3/23/2006 9:37 AM >>>
    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without
    crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

  • Error when doing material transfer

    hi expert,
    when doing material transfer from plant 0001 to plant 0002, error pops up :
    "maintain vendor for the customer 1234 attached to supplying plant 1234"..
    what should i do??
    thanks

    Dear,
            Use XD02( Customer Master Record )  and GOTO -- Genera Data TAB and select Control Tab and under control tab u will find in top VENDOR field.
           and for VENDOR Master Record use XK02 and select Control TAB under which at top u will find CUSTOMER FIELD.,
    Regards
    AJIT K SINGH
    HAPPY TO HELP U
    Edited by: AJIT K SINGH on Dec 1, 2009 2:01 PM
    Edited by: AJIT K SINGH on Dec 1, 2009 5:04 PM

  • Jrew error when install 8i client in chinese win98

    I got the following error when installing the 817 client to chinese win98.
    JREW caused an invalid page fault in
    module JAVAI.DLL at 0167:6ee3803a.
    Registers:
    EAX=00000060 CS=0167 EIP=6ee3803a EFLGS=00000206
    EBX=c0000005 SS=016f ESP=0063ebf0 EBP=0063f184
    ECX=c15089f0 DS=016f ESI=00000009 FS=3587
    EDX=816aac84 ES=016f EDI=00000000 GS=0000
    Bytes at CS:EIP:
    8b 4f 3c 33 c0 03 cf 2b f7 66 8b 41 14 33 d2 66
    Stack dump:
    0063f184 0063f2a0 0063f1c8 c0000005 00000000 00000000 00000000 00400000 00010000 00000000 00020000 6ee37ac9 00000009 0063edb8 00000104 0063ec58
    How to resolve it ?

    1. Yes, it's a distributed installation. I choose ABAP stack installation and then choose Java installation as add in.
    2. Yes, J2EE_ADMIN & J2EE_GUEST can log on to system with password james123.
    3. In usercheck log file, it contains a part of information of sapinst.log, shows below.
    java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
            at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
            at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
            at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)

  • Error When Creating Deployable Client Proxy

    I've created a WSDL file from the XI Integration Directory (Tools--> Define Web Service). I then tested this with XMl Spy and VB.NET. They worked fine.
    I then used NWDS (SP13) to create a deployable client proxy. When building the client definition NWDS returned the error <b>"Problem When Generating the Proxy Definition!".</b>
    1. Are there any log files that would be helpful in deciphering the error message?
    2. Should I take this one to SAP. The WSDL is rather long and complex but it is based on XSD from a large national project and the other tools seem to be able to handle it fine.
    Thanks!

    Hi Paul,
    What adapter you havwe used in XI for this?
    It should be SOAP adapter.
    Regards,
    Bhavik

  • RFC Communication error when doing initial indexing

    Hello Everyone,
    I have a quick question, when doing the initial index rollup for a BIA index the job is failing with RFC communication error.
    We currently have the setting related to " TREXRfcServer threads" set to "Automatic Changes" in order to avoid the RFC Communication errors when loading big loads in BI system.
    We currently are on Revision 49.
    I also have referred to OSS Note 1138603.
    The issue is when I am rolling up the BIA Index the rollup job is failing with RFC Communication errors.
    The Global parameters within BIA are:
    BATCHPARA - 2
    NUMPROC - 5
    PKGSIZE - 10000000
    SUBPKGSIZE - 20000
    We have two app servers with 52 Dialog processes and 25 Background processes.
    Any help would be really appreciated.
    Thanks
    Dharma.

    Removing references to systems and ports
    Issue:
    When the initial indexing is being carried out for an InfoCube to
    create the BIA Index and there is more than one application server in
    the system the job is failing with the http error.
    Hello Everyone,
    Thanks for the input, after the automatic changes was configured for concurrent requests the error is different right now.
    The error message is,
    "Remote communication failure with partner http://<Removed>:<removed>/indexCellTable"
    Overview/Background:
    When the indexing job is triggered as a background job the failure happens when the S table index is being filled.
    In our system where we are trying to do the stress testing we currently have two app servers and one central instance.
    When I limit the RFCGROUP in RSDDTREXADMIN table to one App server in terms of logon group the job finishes fine.
    Whereas, when I do not limit the RFCGROUP and all app servers are open for access the background job finishes with the error message
    Remote communication failure with partner http://<Removed>:<removed>/indexCellTable.
    We have looked into the OSS Note 1102652 and our BASIS team confirmed that they were able to ping from BI App servers into BIA blades and vice versa.
    We also confirmed if the local gateway was used for connectivity.
    The above issue was not in other systems where we only had one server.
    We currently are at Revision 49 and SP 13 in BI.
    We have E5345 Clowertown blades (2 x 4) 16GB blades.
    Please let us know if you need additional information.
    Thanks in advance for the input.
    Dharma.
    Edited by: Arun Varadarajan on Apr 24, 2009 1:36 AM

  • Dump error when doing ODS activation

    Hi,
      When doing to the ODS activation, out of 500 data packets 1 data packet is not updated its highlighting Red traffic light. After that i selected that incorrect data packet i given manual update sytem is gives ABAP runtime errror MESSAGE_TYPE_X. i checked in SM21 as well as ST22 also it was MESSAGE_TYPE_X.
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 143857 ccdbwprd BIADMIN " generated                             
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 144123 ccdbwprd BIADMIN " generated                             
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 144435 ccdbwprd BIADMIN " generated                             
    Transaction Canceled BT 510 ( )                                                      
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 150322 ccdbwprd BIADMIN " generated                             
    Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150322ccdbwprd BIADMIN 0051 )   
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 150639 ccdbwprd BIADMIN " generated                             
    Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150639ccdbwprd BIADMIN 0051 )   
    Run-time error "MESSAGE_TYPE_X" occurred                                             
    > Short dump "090413 150837 ccdbwprd BIADMIN " generated                             
    please give ur suggestion to solve this issue.
    Thanks & Regards
    Khamesh

    please verify the note 852443

  • Oracle error when doing filter to joins

    when doing a filter based upon on results of another request i get the following error. error : (Response came back as text, not XML) the saved request i am linking to has unions in it vs being a single request. If i link to a single request it works but the data i need to get from has unions in it. can anyone please help.

    You are still not entirely clear. BI EE or BI Applications related.
    Also to help matters further could you post as much information as possible.
    Thanks

Maybe you are looking for