Webdav errors in CS4

I'm using CS4 to connect a webdav session to an Apache web server. I've had other users using CS4 connect to the same server and upload content via webdav without any problem.
When I try to upload my site, most files go successfully, but several come back with the following error:
file.jpg - error occurred - An HTTP error occurred - cannot put file.jpg. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
Thoughts??

Anyone?

Similar Messages

LSO function test - WebDAV-Error: 500

Hi,
I have loaded content using the authoring environment. The master repository resides in KM. The content gets pubshied without any errors, but I get a 404 Resource not found error when an employee tries to start the course through ESS.
I ran a function test using the repository explorer and got the following error:
Test aborted due to error: Failed to read file '/folder-806347554/fileA.txt'!
-> reason: WebDAV-Error: 500: Internal Server Error (500)
com.sap.hcm.ls.shared.repository.access.wdslide.WDException: Failed to read file '/folder-806347554/fileA.txt'!
-> reason: WebDAV-Error: 500: Internal Server Error (500)
     at com.sap.hcm.ls.shared.repository.access.wdslide.WDRepository.throwWebDavError(WDRepository.java:2744)
     at com.sap.hcm.ls.shared.repository.access.wdslide.WDRepository.throwWebDavError(WDRepository.java:2734)
     at com.sap.hcm.ls.shared.repository.access.wdslide.WDRepository.readFile(WDRepository.java:1001)
     at com.sap.hcm.ls.shared.repository.access.DeltaVerRepository.readFile(DeltaVerRepository.java:335)
     at com.sap.hcm.ls.shared.repository.access.Repository.readFile(Repository.java:350)
     at com.sap.hcm.ls.shared.repository.tools.FunctionTest.showFile(FunctionTest.java:823)
     at com.sap.hcm.ls.shared.repository.tools.FunctionTest.runAutoTest(FunctionTest.java:328)
     at com.sap.hcm.ls.shared.repository.tools.FunctionTest.run(FunctionTest.java:79)
From what I understand the WebDAV set up is correct. The URL is generated correctly, but the file inside the folder cannot be read, as a result the error gets generated.
Any help is appreciated.
Thanks,
Priya.
Edited by: Priya Rao on Aug 3, 2009 6:20 PM

Hello Priya,
Please review SAP Note No. 914824 - FAQ Authoring Environment - SAP
Learning Solution. Specfically the file types had to be added to the
MIME repository of the IIS server. The MIME mapping and file type
extensions that are not defined at the Mime Map node in the IIS
Metabase.
Please make sure that you are using basic authentification
Please refer to item 21 of SAP Note No. 746917 - "FAQ Content Player -
SAP Learning Solution". Please make sure that you are using Basic
authentification and NOT form ased login!
Please reference the SAP Notes below:
SAP Note No. 590060
SAP Note No. 700695.
SAP Note No. 724719
Regards,
Manny

Will installing a CS5 trial fix the version cue errors from CS4?

Hi, I was wondering if installing a trial version of CS5 would fix the version cue errors from CS4.
If not, does anyone know a good download of the version cue files? They have all dissappeared from my computer after running the cleanup script and the problem still persists =(

Afterr months of pain and one ephiphany later, i have a simple solution to the issue.
Go into the common files, adobe drive, version cue folder, and drag the files into the recycling bin =)
So theres no need to install cs5 =D
Hope this can help others who still have this issue.

Could not complete your request because of a program error photoshop cs4

My first frustration right now is that I can't search the forums... anyone got an answer to that? on the right hand side (if I'm logged in) I type in a search for anything and it always shows no search results found! Why? is the search function not working?
Anyway, my problem is that when I try to save a multi-layered psd file into psd or jpg I get this error message: "Could not complete your request because of a program error."
What is causing it?
I checked for updates and PS is up-to-date. I restarted, and it worked great for about 3 saves (different pictures). (I'm basically running through some shots and just doing a quick levels and curves adjustment and running an action putting in my name watermark.)
After that quick edit and trying to save - same error message again.
It started suddenly yesterday - after having used PS for about 1.5 years without a problem. I haven't done any changes to it as far as I'm aware.
Any one seen this before, or have a solution to this?
Thanks!
Computer specs:
Windows 7 Pro - 64-bit
12 GB Ram
750 GB OS hdd where PS is installed
2 TB Media drive where the files are being pulled up from/saved to.
Intel i7 x980 3.33 GHz
GeForce GTX 470 with 1280 MB dedicated memory
Logged in as administrator.

Did you update or change or plug-in or remove anything else on your computer just before it happened? Photoshop relies on other system libraries to do things and maybe one of those changed.
No, I did not change anything; I was editing pictures - from a quadding trip where they asked me to shoot for them - and suddenly I started getting the message on most pictures.
Hard drives are not nearly full. (.99 TB free on media drive and 588 GB free on OS {C} Drive)
scandisk error check? I probably need that.. (I've had some problems with BSOD and had the BIOS corrupted recently that I had to flash the BIOS again. Could that cause something like this?)
How do you reset preferences? Is it the Ctrl + Shift + Alt key immediately after PS starts? I did that and it didn't fix it.
Saving in odd location? No, I don't think so; I save to the same place I save other stuff and I have a solid directory base and I always follow the same procedures. I save back into the same folder I open the file from and save back to the same filename + "edit". That way I can compare side by side and have a backup copy of the file.
The only USB device plugged into the computer is a logitech wireless combo of keyboard and mouse. (And a wired USB keyboard that sits to the side and that I use only when the batteries in my wireless dies.
I can't think of anything that has changed that would cause PS to act like this.
If I can't get it working soon, I'll re-install. I have the Production Premium CS4 version - can I just reinstall PS or would I have to do the whole suite?
Thanks!
PS. I don't know if I was clear enough on what I'm doing: I open anywhere from 1 - 20 pictures at once, and then do a quick level or curve adjustment and save to a different file name. The confusing thing is - some pictures I have no problem with, but others - even though I do exactly the same thing - this error message comes up. I'd say about half of my 107 pictures from the quadding trip refused to save.
It almost makes it seem like some pictures are corrupt or something - and yet, I'd be really surprised to have soo many corrupted images suddenly.

Set up error on CS4 Master Collection

I bought and have been running the CS4 Master Collection with no problems for months.
Then suddenly, I got a glitch in my photoshop CS4 and could not repair it. I decided to uninstall the whole CS4 suite only to find that it did not uninstall properly. In the uninstall panel, the suite set up icon remained, even though it showed no more programs in terms of space taken up.
I then tried reinstalling the suite, but got this message:
Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance.
Note this is NOT Internal Error 2739. At least not that I know of.
I have since been on various forums and help sites and tried all kinds of ways to get around this - downloading Java Runtime, doing a regsvr32 jscript.dll command in cd ..\SysWow64 through an elevated command prompt as admin. I have deleted all traces of Adobe programs in my Common files folders and anywhere I could find them, but nothing has worked. http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administ rator-privileges-in-windows-vista/
I know many others have had this issue, but none of their solutions seem to have worked for me. If anyone has any advice on how I can reinstall my legal and legitimate CS4 Suite, please let me know. I have Vista 64bit Business edition running on a Dell Precision T3400.
Thanks

I have also run CS4Installer Database Utility, CC
cleaner and done a full registry clean

Installation error - photoshop CS4 on windows vista 64 bit

Hi guys
after doing all the ideas in my previous post , I'm now with this error messege while installing the trial version of Adobe photoshop CS4
then after finishing the installation I've tried to start the software so I've get another msg
please tell me what to do

Didn't you read the posts in your other thread? Several people told you what needed to be done.

WebDav error on Windows Server 2008 R2

I receives following error(pic below) when i try to open "WebDav Authoring Rules"
It always happened at the second and more times after IIS Manager reset. At the very first time it opens OK.
In addition i did not manage to publish from my streaming device to WebDav of Windows Server 2008 R2 but i don't have any issues with WebDav at Windows 7.
Please advice.
I did not manage to add picture for the reason below
"Body text cannot contain images or links until we are able to verify your account."

I'd suggest asking your question over in the Publishing section on IIS.net:
http://forums.iis.net/1045.aspx

I can´t start photoshop cs4 error: Photoshop CS4 stopped working.

Hay,
My computer is a new computer that I bought 12/26/2008
PC CONFIGS: 3GBs RAM DDR3, Core i7 920, Radeon HD4870, Windows Vista Ultimate x64, 1 TB of HD 600 GB free
, and when i try to run the Adobe Photoshop CS4 32bits it says to me that it stopped working so it show me this problem:
Assinatura do problem:
Nome do Evento de Problema: APPCRASH
Nome do Aplicativo: Photoshop.exe
Versão do Aplicativo: 11.0.0.0
Carimbo de Data/Hora do Aplicativo: 48d3882e
Nome do Módulo de Falhas: StackHash_fd00
Versão do Módulo de Falhas: 0.0.0.0
Carimbo de Data/Hora do Módulo de Falhas: 00000000
Código de Exceção: c0000005
Deslocamento de Exceção: 00000000
Versão do sistema operacional: 6.0.6001.2.1.0.256.1
Identificação da Localidade: 1046
Informações Adicionais 1: fd00
Informações Adicionais 2: ea6f5fe8924aaa756324d57f87834160
Informações Adicionais 3: fd00
Informações Adicionais 4: ea6f5fe8924aaa756324d57f87834160
Leia nossa declaração de privacidade:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0416
Im brazilian and the it is in portuguese.
additional: (im using the trial version, 30 days for use)

Hi All
Am having the same problem with (Roft) with the same computer specs.
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.0.0
Application Timestamp: 48d3882e
Fault Module Name: StackHash_f4b6
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 00000000
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 1033
Additional Information 1: f4b6
Additional Information 2: 9227a0f2bedc12733cd08560b33a6046
Additional Information 3: 271e
Additional Information 4: f9344aa6e003b5e529741a1c1f77ed75
Extra information about the problemBucket ID: 971725909
My account is an admin account but this the error occured.
Checked and all the drivers and all seems to be fine.
Please help!!!
Thank you,

Preview versus Real View Not the Same, Site Definition Errors - Dreamweaver CS4

I am having trouble working on sites where it seems that Dreamweaver wants me to specify different file locations for various "includes" depending on whether I want to view the site as a preview (F12) vs. on a local test server vs. on the real website server. Note I am using Dreamweaver CS4 (ver. 10) on Windows, my local test server is Apache running via an Xampp installation on Windows, and my production server is also Apache, running at Hostgator. I am building a fairly basic html site using SSI via SHTML files, rather than PHP or a more sophisticated method. Here is what seems to be happening:
1. In my index.shtml file I call, for example, a subheader file called "header-nosub-menu.inc.htm." I have my site definitions set to "relative to document root." Using the insert -> SSI command, Dreamweaver links to the file with the following: My first problem is that, as specified, the subheader.menu.inc.htm file is not found and the preview gives me an error. I get the same error if i try to display the file on my local test server (http://localhost/domainname). However, if I upload the file to my production server, it seems to work fine. If I change the include command to: #include virtual="./includes/subheader.menu.inc.htm," by manually inserting the "./" to change the directory reference, then the file seems to work in all three situations Which is the correct directory specification, and why is Dreamweaver not generating it automatically?
While I can make the manual changes in the directory specifications, I am concerned that if Dreamweaver is making an error in this instance, it may generate more serious problems that are harder to find later.
2. The second issue seems to involve the Site Definition file configuration.I get an error message when I set up my site definition in what seems to be the correct way, specifically, using the following specifications:
Local Root folder: "C:\htdocs\domainname-dev\"
http address: "http://www.domainname/"
testing server folder: "C:\htdocs\domainname-dev"
url prefix: "http://localhost/domainname-dev"
The error message is: "The site url prefix for the testing server does not match the site url prefix specified in the http address for the site."
However, when I change the testing server url prefix to one that does not yield an error message ("http://localhost") I then have problems with the preview (F12) display. Specifically, instead of a preview request generating the following url: "http://localhost/domainname-dev/TMPm393xnclqu.shtml" I find that it generates the following: "http://localhost/TMPm393xnclqu.shtml" The so called incorrect definition seems to be the correct one, but why is Dreamweaver not recognizing it as such? Am I making a error somewhere else in my configuration?
I would appreciate any assistance that anyone here can provide,
Thanks,
http://localhost/

except for the Apache virtual host configuration, which I do not see a need for
I wasn't suggesting that you use virtual hosts (although I have defined about 50 virtual hosts on my own development machine). I was trying to understand the url you listed:
http://www.domainname/
Without a virtual host definition, that would have no meaning and could not point to anything, unless you simply were leaving off the TLD in the example. (.com, .net, etc)
I often use the PHP $_SERVER superglobal to define paths and handle differences between the development environment and the remote server environment. Examples:
DOCUMENT_ROOT: D:/ZendServer/Apache2/htdocs/website/ranch (machine path)
REQUEST_URI: /topic/calendar (url parameters)
SCRIPT_NAME: index.php
HTTP_REFERER: (the url of the script preceding the current script)
HTTP_HOST: (this is the domain name. It is very useful for distinguishing between the local and remote environments)
COMPLETE EXAMPLE:
echo "<p><a class='noPrint' href='".$_SERVER['HTTP_REFERER']."'>RETURN TO PREVIOUS PAGE</a></p>";

IDisk WebDAV error message - how do I get rid of this?

Years ago, I used to have an iDisk account. The iDisk link is still on my desktop. Starting 2 days ago, I keep getting this error:
"WebDAV File System Authentification
Enter your user name and password to access the server at the URL "http://idisk.mac.com/kristinamc_tda/" in the realm "idisk.mac.com."
My only options are to cancel and save. I press cancel and the message comes right back, so I cancel again and it stays gone for about 20-30 minutes. I have no idea how to get rid of this or why it started doing this. Since the account doesn't technically exist, I'm thinking that the password will never be correct - I've tried entering what I thought was the password, but it never accepts it. I have tried to see if removing the iDisk link on my desktop would make it stop, but I cannot get rid of it. I am trying to write a paper and this annoying error is about to make me freak out. Does anyone have any idea what I should do to fix this?
Kristina

You may also want to open Keychain Access in Applications/Utilities and delete any referrence to the earlier name.
I would send yourself an Email with the info in to keep a permanent record in case you ever decide to activate that name again.
A lapsed @mac.com name can be used in iChat for free so you may not want to go this far.
11:42 PM Sunday; July 19, 2009

Error installing CS4 from downloaded .dmg file

I work for a company that receives upgrades from Adobe and most recently was given the downloadable CS4 upgrade from our IT department. When I went to open up the DesignPrem_CS4.dmg file it gives an error of "The following disk images failed to mount" reason "not recognized." Have you heard of this happening before?
We are currently running CS3 on Mac OS 10.5.6 which was installed from a CD. I've done some searching on this error, but the only thing I have found is that the file might be corrupt. We had IT download it again, but had the same issue. I've also tried to run the .dmg file through Disk Utility and tried to repair it without any success. Any thoughts on fixing this? Should we download directly to our Mac desktop? Could a file become corrupted by downloading to the Windows environment and then transferring over a network to the Mac?
Thanks

Hi Buko,
If it is a corrupt file, what steps can we take to insure that it doesn't happen again? Our IT department has downloaded it twice. Could it be the method or program in which they are downloading? What causes corrupt downloads?
Thanks

Epson P.I.M. II Plug-in v2.2 install error with CS4 trial version

Hello,
I am using a trial version of CS4 that I just downloaded & installed (works fine). I tried installing Epson's ICC color profile for the 1280 printer with the P.I.M. II Plug-in v2.2 installer from the Epson website (http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=14387&prod oid=28907797&infoType=Downloads&platform=All). It doesn't install and gives the following error:
"Adobe Photoshop 6.0/7.0/CS or Photoshop Elements 1.0/2.0/3.0 was not found on your computer. The plugin was not installed."
Has anyone else encountered this? Epson tech support was no help ("...Call Adobe").
Q: Does this error happen with the full CS4 version (not just the trial?)
Q: Perhaps CS4 includes the Epson ICC's with no separate installation of Epson software? If I select print from CS4, there is a Epson Stylus Photo 1280 available in the Printer Profile drop down. I wonder if I am missing anything by not being able to install the PIM ICC profile.
?? Anyone have any thoughts??
Thanks,
Katherine

You're trying to install a very out of date and unnecessary plugin.
The Epson ICC profiles come with the printer driver - they have nothing to do with the obsolete PIM plugin.

WebDAV error when doing a client push ConfigMgr 2012 R2

Hi everyone, I am getting an error message when doing a client push, only on some DPs.
Here is the setup:
ConfigMgr 2012 R2 on Server 2012 R2.
DP are on Server 2008 R2 (for the most part).
DP are installed using the exact same way, adding the Primary Site Server to the local Admins group, then using the console to install the role, selecting BranchCache and Configure IIS.
No PXE.
Boundary groups are configured as appropriate.
When initiating a client push the following errors are displayed in the CCMSetup.log:
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
Failed to check url http://DPServerName.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
GET 'HTTP://MPServerName.com/CCM_Client/ccmsetup.cab'
The installation is done but yet again, no local DP are used.
The same scenario is actually working on other DP that was configured using the same exact way.
Servers where not new installation and where used for other things:
MDT Deployment Share with PXE.
Other share.
As far as I can tell, IIS is well configured as I am able to deploy any other software on clients and they are using the local DP. Only the client installation is causing problem.
Anyone have any idea?
There is a lot of post about a similar problem on ConfigMgr 2007 but all solution are to configure WebDAV, which is not configured in ConfigMgr 2012.
Thank you guys for any tip and/or help!
Mathieu

You are right about the log, here is a longer snippet of it:
==========[ ccmsetup started in process 5980 ]========== ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Running on platform X86 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Launch from folder C:\Windows\ccmsetup\ ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
CcmSetup version: 5.0.7958.1501 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
In ServiceMain ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Running on 'Microsoft Windows 7 Professionnel ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
SslState value: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPPORT: 80 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSPORT: 443 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSSTATE: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSCERTNAME: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
FSP: ServerSCCMPSS.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMFIRSTCERT: 1 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Retry time: 10 minute(s) ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI properties: INSTALL="ALL" SMSSITECODE="S01" FSP="ServerSCCMPSS.Test.com" SMSCACHEFLAGS="PERCENTFREEDISKSPACE" SMSCACHESIZE="20" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Source List: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmmp.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmpss.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\dcsspsccmmpdff.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMMP.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMPSS.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\DCSSPSCCMMPDFF.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MPs: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmmp.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmpss.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
dcsspsccmmpdff.test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
No version of the client is currently detected. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Updated security on object C:\Windows\ccmsetup\. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Sending Fallback Status Point message to 'ServerSCCMPSS.Test.com', STATEID='100'. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Params to send FSP message '5.0.7958.1501 Deployment ' ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
State message with TopicType 800 and TopicId {40FD8A62-3E9A-41FB-8698-E9A6658A4A91} has been sent to the FSP FSPStateMessage 2015-03-25 23:12:12 4536 (0x11B8)
Running as user "Système" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Detected 206206 MB free disk space on system drive. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Checking Write Filter Status. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=S01))' ccmsetup 2015-03-25 23:12:13 4536 (0x11B8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>S01</RootSiteCode><CCM> <CommandLine>SMSSITECODE=S01 FSP=Serversccmpss.Test.com SMSCACHEFLAGS=PERCENTFREEDISKSPACE SMSCACHESIZE=20</CommandLine> </CCM><FSP> <FSPServer>Serversccmpss.Test.com</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="Test.com" /><Forest Value="Test.com" /></ClientOperationalSettings>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmpss.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmpss.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmmp.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmmp.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'dcsspsccmmpdff.test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'dcsspsccmmpdff.test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrieved 3 MP records from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrived site version '5.00.7958.1000' from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteCode: S01 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteVersion: 5.00.7958.1000 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for a valid online MP... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Checking the URL 'HTTP://Serversccmpss.Test.com:80/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'HTTP://Serversccmpss.Test.com:80/CCM_Client' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found a valid online MP 'Serversccmpss.Test.com'. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for DP locations from MP(s)... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Current AD site of machine is CDL LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Local Machine is joined to an AD domain LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Current AD forest name is Test.com, domain name is Test.com LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Begin checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Finished checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Adapter {72FC011A-9993-4CBD-B7B2-D1D56FD38711} is DHCP enabled. Checking quarantine status. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="S01"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="CDL"/>
<Forest Name="Test.com"/>
<Domain Name="Test.com"/>
<IPAddresses>
<IPAddress SubnetAddress="172.16.64.0" Address="172.16.65.9"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{B9F091E1-649D-47C4-A0AD-19508435F962}</ID><SourceHost>C006235</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:C006235:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>Serversccmpss.Test.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
CCM_POST 'HTTP://Serversccmpss.Test.com/ccm_system/request' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received header '<Msg SchemaVersion="1.1">
<ID>{336667CB-2AF5-4B7D-9B1B-3B9A39777034}</ID>
<SourceID>GUID:8BB44537-8D62-4751-9114-1F5527EE800F</SourceID>
<SourceHost>ServerSCCMPSS</SourceHost>
<TargetAddress>direct:C006235:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<ReplyCapabilities><AllowRegistrationReset>direct:ServerSCCMPSS:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>C006235</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="2574"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature">3082019406092A864886F70D010702A082018530820181020101310B300906052B0E03021A0500300B06092A864886F70D010701318201603082015C02010130393025311530130603550403130C44435053505343434D505353310C300A06035504031303534D5302104369DD60F91848B94FFD72538BAD96B8300906052B0E03021A0500300D06092A864886F70D010101050004820100B563F71CC4F86BEA28550E4EC51727E4F45F9681BABD9A085EAF4B3CC667B7BF7D212329195A13DF562A46205E22EDA829D0B06EA3C9C0C96248AD58DEECA457241EB4F4CBE581D49C0D657B3485444E06A9ED67D9854B551AADED7E1E3E519CC7D25B473A98BAC3826BE8BDB68BC4799C652168351C6796AE84505B5B703B3AABA3AD71113B133C1410EEB4CA167010AAA4AF2D3BE209E037641CA0293271242FF254C16F8A0997B5A335FB00EDCE445B2CFB21AF5923B14D9BEE3FA940B4B513D230607678ABD6A6211E36418EC2D8CFCEF5370999E6678CD79099B2D9FE29E8F3E1C5FFEA31E2D17C977288E03027D887B1D09E9049EE2FA5B76C32214BD9</Property><Property Name="AuthSenderMachine">ServerSCCMPSS;Serversccmpss.Test.com;</Property><Property Name="MPSiteCode">S01</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003" Signature="http://CDLGHOST.Test.com/SMS_DP_SMSSIG$/S0100003"/><ADSite Name="CDL"/><IPSubnets><IPSubnet Address="172.16.64.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>CDLGHOST.Test.com</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL"/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="S0100003" FullPackageVersion="7" FullPackageHash="CE8C259380667F5687A01FA5365B2D2D1236BA9FC1AD4696A54D914B919D294D" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30416572;2153570688" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found local location 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Discovered 1 local DP locations. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Got 401 challenge Retrying with Windows Auth... ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to check url http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005 ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
GET 'HTTP://Serversccmpss.Test.com/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully loaded ccmsetup manifest file. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1501' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vcredist_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vcredist_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vc50727_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vc50727_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item
I did double checked with a friend about my configuration and everything, just to make sure, and everything seems to be right.
As for the use of account used to get the client, a domain join computer will not need to us the network access account if the DP is in the same domain and the same exact config on other servers is working like a charm deploying the client, same
security and configuration.
All default IIS security and share permission.
Thank you guys for your suggestion and help.
Mat

BOOST ERRORS porting cs4 to cs5 , compiling plugin with cs5 sdk

i have a project that is working fine with adobe indesign CS4 and now when im trying to build it with cs 5 , i got this error
boost::move ambigous call to overloaded function in CS5 sdk file file "any_regular.hpp"
im using VS2008 and boost version 1.49 in my project, i gues its compatability issue of boost with CS5 Sdk

Pectora:
Check the C++/Preprocessor/Preprocessing Definitions field in your Project Properties dialog. Make sure that your Debug version has a "DEBUG" definition placed in there, and that your release version has an "NDEBUG" definition placed in there someplace. My guess is that either you left one of them out, or that you have the DEBUG definition in your release properties. Other possibilities are a failure to separate definitions properly or misspelling.
HTH!
P.S. I am assuming that you are working with VS8 on a Windows box. This information should be included in your next submission just to make sure we are all working from the same starting point.

Unexpected end of file error on CS4, can I fix this or is the file lost?

I'm trying to open a Photoshop CS4 file, but it keeps giving me an error message saying "Could not complete your request because an unexpected end-of-file was encountered." A lot of hours went into this project. Can I fix this or is the file lost?

Oh man, I've been getting that too (with CS5). Unless I move my file off my computer at end-of-day, I show up and get this error. I'll be eager to see what an expert says… and sorry I can't help you out!

Webdav errors in CS4

Similar Messages

Maybe you are looking for