Webdav Settings in Mac MX 2004 dissappearing

I am running Tiger 10.4.7 on an Intel 17" iMac with 1gb RAM.
I have installed Dreamweaver 7.0.1 , put in my serial and
everything looks great. Once I enter the site information
everything looks fine, I can connect edit pages, the works. Once I
quit Dreamweaver and try to launch it again all of my WebDav
settings are gone. I have tried reinstalling Dreamweaver, checking
permissions on the config file, deleting and recreating the config
file, and the problem still persists. I know there was an issue
with the Windows version, is there a known issue with the Mac
version too?

Thanks for your response. I should have mentioned that
Dreamweaver MX has been updated to the latest version, 7.0.1.
The main reason it is a problem is that the website is also
worked on by others using Windows. Not knowing on which platform a
file was last edited means not knowing when it was last edited
updated. If it was just me editing all the files, I could just add
10 hours to every date/time and I'd know when something was last
edited. But I can't do that.
A second reason is that it makes me wonder if our website's
backup system (which I have no control over) is working properly.

Similar Messages

Mac MX 2004 modified file time wrong

When I save a file in Dreamweaver MX 2004 (on an Intel Mac
under OS X 10.4.10), it sets an incorrect "modified" date/time: the
date/time of the file as viewed in the Finder, or on the website
after PUTting the file, is 10 hours less that it should be.
For example, if I save a file in Dreamweaver at 8am, the
date/time modified as shown by the Finder is 10pm the previous day.
That is also the date/time displayed by an FTP program after I use
Dreamweaver to PUT the file.
My Date & Time settings in System Preferences are
correct, including the time zone (Eastern US -- EDT). My website is
hosted +3 hours away (Pacific Time).
I vaguely remember being able to set a time offset for the
webserver under some Windows version of Dreamweaver, but I can't
seem to find any similar setting for Mac MX 2004.

Thanks for your response. I should have mentioned that
Dreamweaver MX has been updated to the latest version, 7.0.1.
The main reason it is a problem is that the website is also
worked on by others using Windows. Not knowing on which platform a
file was last edited means not knowing when it was last edited
updated. If it was just me editing all the files, I could just add
10 hours to every date/time and I'd know when something was last
edited. But I can't do that.
A second reason is that it makes me wonder if our website's
backup system (which I have no control over) is working properly.

TS1702 Hi, I bought The Truth About Love album on itunes as a complete my album from my Iphone4S. I can see the name of the album as a purchase on my Mac Notebook 2004, however I am not unable to add the music to my itouch and is doesn't show up in music

Hi,
I bought the Truth About Love/Pink's album on itunes as a complete my album purchase as I had bought a song from the album previously. I bought it via my Iphone 4S. When I turn on itunes on my Mac Notebook 2004 (IOS X 10.4.11) I can see the album as a purchase but it is not listed in my library music nor can I add it to my Itouch 2nd generation. Do you know why? I can access the songs on my iphone but nowhere else.

They will only be on your computer's iTunes if you put them there. If you are in a country where you can re-download music then they should show under the Purchased Link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes. If they don't show there then you can connect your phone to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over.

Why is Mac Office:2004/2008 acting strange?

After I upgrade to Lion 10.7.3 over a month or so, I experience problems with some of my documents in Word or Excel. The Excel opens to READ only and I am the only pperson that has the priviledge for it. Also when I go to leave a cell, the curson locks on the cell and grabs everthing in the path I move my mouse. I try to click it loose and nothing happens. After a while I do get back control of the document, but again it begins to behave strangely.
In my Word documents, I would be typing and all of a sudden the curson is some other place on the page inserting my input in the wrong place.
I have spent hours on the phone with the tech support people with Microsoft and Apple, but no one seems to be able to have my errant software work properly. In my furstration I purchased the 2011 version of Mac Office. I stll have the same problems after installing it.
I just realized also that when I did an upgrade of the MS Mac Office:2004 to 2007, I continued to save my documents in the 2008 version, but selected the 2004 format to save them. I understand that 2004 will not even open in the Lion OS X. So I am beginning to think I may have created an anomoly by intergrating the two versions while in the Lion OS X version. Does anyone have any nsight to this?
Also as part of my frustration with this software proble, I am not able to restart or shut down my Mac Mini from the drop down menu. The wheel just spins and spins for minutes and minutes, so I finally do a power shut down. The restart it by pressing the power button again to turn it on. Any clue to fix this problem.
My Mac Mini is a 2009 vintage. I am not an extremely knowledgable computer person. I need help. Thanks!

I have contacted them many many times. For two days I waited on the phone for over 1 1/2 hours. All total I have been on the phone with them over 6 hours and they are not able to find any problems with what I am experiencing. Thus I fell there is something with the Lion OS X that is the main source of this glitch. Thanks for your input.

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
On your new MacBook Pro open "Migration Assistant" in your utilities folder.
Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

Converting from ie and using mac office 2004

We just upgraded to Mac office 2004 and are trying to figure out how we can insert url's into entourage messages. In the past, we used the Insert command which provided a list from IE's favorites...now that seems to be either impossible or hard to find.
Does anyone have any ideas??? It would seem that with all the interoperability objectives and MSFT's advance notice of discontinuing IE .... there should be something out there somewhere....
IMac ppc4 800mhz Mac OS X (10.3.9)

That is possible...but the mac office used to have a function that allowed one to (using the insert command) insert a url link stored in IE as a favorite.
Opening two programs, as you suggest, is somewhat of a step backward and requires the user to open their browser (if not open), find the url in the bookmarks, copy it and then paste it in the email/document.
If you have any ideas - I'd be interested in hearing about them.

Mac mini 2004 stopped working

Hi all,
I have just bought a second hand Mac mini 2004 and was working have taken a copy of the internal hard drive through disk utility, but it went to blue screen and couldn't restart it back up so switched it off and now it doesn't start just stays on a black screen. There is sound coming from the mac the hard drive sounds to work and the optical drive and the light comes on the front too, but no output to the monitor I have tried a new cable and tried a new monitor too.
There was no OS X disc with it and now I have tried to start with the external drive but I am using a windows keyboard and unsure on keys to use.
Hope someone can help really want to start to use a mac.
Regards
Aidan

Hi BDAqua,
Thank you for the response have talked to a mac repair company and they have said it sounds like the graphics card has gone on the logic board and would be unfixable or too much to fix. Is this true? or is this something that can be done by myself?
regards
Aidan

I am using a Mac OS X 10.7 and i have trouble using idvd. If I buy a previous version of ilife, will I be able to use idvd without affecting the settings of Mac OS X 10.7? Can both versions of ilife run on the same mac?

I am using a Mac OS X 10.7 and i have trouble using idvd. If I buy a previous version of ilife, will I be able to use idvd without affecting the settings of Mac OS X 10.7? Can both versions of ilife run on the same mac?

You don't need to buy an earlier version of iDVD to have it run with Lion. iDVD 7 has been with us since iLife 08. Tell us in detail what you're experiencing.
OT

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word, excel, nothing works.
I have a mac book pro 10.6.8
Thanks

cassidy3 wrote:
Good news is that I can access all my documents. Bad news is I had to pay $150 for it.
I spent a lot of time trying to find a solution before buying. I did not try the launch terminal solution....
I will check back so I can find out what to do should this happen again.
More possible bad news. If you had followed what fane_j had asked you to do you might have found out it wasn't microsoft's fault for your problem and wouldn't have had to spend $150. Because while you may have an Office that works, fane_j was not suggesting a solution but probing for a trojan (google "flashback trojan") that has been crashing powerpc code which is what Office 2004 is.
So if you do have the trojan, while you can run a version of Office, the trojan may still be in your system since installing a version of Office isn't going to remove it. So I'll make another request. Launch Terminal (in your Utilities folder) and copy/paste the following line into the terminal window and hit return:
defaults read ~/.MacOSX/environment
If you see anything other than a "does not exist" error message you almost certainly do have the trojan and post the results in this thread.
The choice is yours. You can ignore this and take the risk. Or do what has been requested.

I received an email containing a spreadsheet created using Mac Office 2004 on my new MacBook Air equipped with Mac Office 2011. When I saved the document, my Finder lists the document without the .xls file extension. Why?

I received an email containing a spreadsheet created using Mac Office 2004 on my new MacBook Air equipped with Mac Office 2011. When I saved the document, my Finder lists the document without the .xls file extension. Why?
All other .xls documents created by Mac Office 2004 retained the .xls file extention when I migrated them over to the new MacBook Air.

I know what happened. When I saved the document I somehow hit the Hide File Extension box. Sorry to trouble this group. I simply resaved it w/o activating the Hide File Extension feature.

I loss the serial number for my Final Cut Pro. I just traid instaling before that upgrade my Mac G5 2004 Computer. Could anybody help me?.

I loss the serial number for my Final Cut Pro. I just traid instaling before that upgrade my Mac G5 2004 Computer. Could anybody help me?.

These are user forums. You are not speaking to Apple here. You may contact them:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

What are the email settings for mac mail

what are the email settings for mac mail

If you mean iCloud email, you can automatically configure this on your Mac runnint Mountain Lion by going to System Preferences>iCloud, signing into your iCloud account and checking Mail. To manually configure it, use these settings: http://support.apple.com/kb/HT4864.

How do i change imessage settings on Mac to stop RTN = Send message

how do i change imessage settings on Mac to stop RTN = Send message.
Is there sa setting so that Imessage on mac can be the same as iphone.... I need to be able to send messages as i would via iphone, with differnt data on different lines, therefore using the RTN key to go to the next line?
thanks

If you hold down option while pressing return, it should move the cursor to the next line without sending the message.
I hope this helps!

How do I change the incoming mail server settings in Mac Mail?

I have a Mac 27" update to Yosemite 10.10.2. I have 25 GB free in storage. I have been having trouble with road runner email and found out today that they are changing their email settings. How do I change the incoming mail server settings in Mac Mail from pop-server.columbus.rr.com to mail.twc.com?

Replying to yourself doesn't help:
Reply to the proper person.

Dual G5 2.0 Power Mac (June 2004) referb - booting problem

Hi all - my dual G5 2.0 Power Mac (June 2004) decided to rev its fans and boot no more. When I push the power button in front, the white light comes on while pushing it, then goes off, yet I hear the fans starting, the hard drive spinning etc. The key board isn't getting power (the caps light doesn't go on) and after a few minutes the fans rev like a jet engine...starting slow then gaining speed. I can't open the DVD from the key board (have tried all usb ports). Have also looked through this discussion area and tried many of the solutions provided (reset the PMU, unplug, try different outlets etc.) Any help would be appreciated. I do have Applecare but they are closed for the night.
Thanks for you help
Dual G5 2.0 (June 2004) referb from Apple Mac OS X (10.4.6)

Your OS is not loading and the fans default into a speed up mode.
Power up and hold down the mouse button, the cd tray will spit. Insert Tiger/install disk and power boot holding c. (note: use a wired keyboard/mouse directly to the machine and nothing else for now)
In the Installer, select Disk Utility from the menu>Repair disk/permissions. note any errors you see.
If you can't access the drive, it might be dead. I hope you backed up files.
All you need to do is get a new drive and reinstall Tiger etc.
If you can get a 6 pin firewire 400 cable to each Mac and t boot the problem Mac. the hard drive should appear on the other which you can recover files.
If the OS is fried you can do a archive and install too.

Webdav Settings in Mac MX 2004 dissappearing

Similar Messages

Maybe you are looking for