WebDav Very Slow on Windows 7 Pro

Environment:
Hosted SharePoint 2010
Two laptops on a Windows Domain: 1) Windows 7 Pro 32-bit & IE11 and 2) Windows 7 Pro 64-bit & IE11.
Problem:
WebDAV is VERY slow on Windows 7 only. When using WebDAV on Windows 8 or using the web portal (browser), file uploads are very fast. We've performed extensive testing as follows with no success.
Installed or confirmed SP1 was installed
Disabled "Automatic Detect Settings" within Internet Options -> Connections -> LAN Settings.
Forced port 443 within URL upon mapping a drive (ex. <URL>:443)
Logged in using the local administrator's profile
Detached computer from domain and used the local administrator's profile

Hi Wleblanc,
“WebDAV is VERY slow on Windows 7 only. When using WebDAV on Windows 8 or using the web portal (browser), file uploads are very fast.”
Do you mean only the uploading operation in WebDAV of Windows 7 is slow or the whole WebDav performance is slow ?
Please check this service ”Webclient” from the service control .
I noticed that the process of creating a WebDAV connection is a little different in Windows 7 and Windows 8 .Someone indeed informed the information that this service will affect the WebDAV performance.
Here are links for reference:
Using Windows, how do I use WebDAV to upload files to my Oncourse Resources or Drop Box?(Pay attention to the creating process)
https://kb.iu.edu/d/araf
How to speed up webdav in windows 7 solved for me(Pay attention to
Ahmed Osman`s answer)
https://groups.google.com/forum/#!topic/alfresco-technical-discussion/XF5HTouSnC0
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does
not control these sites and has not tested any software or information found on these sites.
Best regards

Similar Messages

Very slow scrolling window thumbnails clips

Very slow scrolling windows with thumbnail clips. The more files in the event, the worse it gets. It is very frustrating. Is in others it is the same? I have MacOookPro i7 early 2011, thunderbolt drives RAID0, 16GB memory, FCPX 10.0.7. After the hardware is decent.
Give some feedback, thank you.
P.S. I might add that this disadvantage are found from version 10.0.0.

You might want to look at either booting from your install dvd (insert, restart and hold 'C' down) and running disk repair from Utilities. Alternatively, and I always suggest any Mac user should have at least one, a 3rd party disk utility like DiskWarrior (there are others) is extremely useful.

Data transfer very slow on mac pro!! mac H/W unable to fit specifications.

Hi,
I am installinginternal disks on the quad mac pro and the transfer ratet in the mac are very slow!!!
the disks are: barracuda 7200.10 disks, 500 GB. Sta II 300, max ST3500630AS firmware 3.AAE . throughput:300mb.jumpred off to get the 300.
MAC tells that the QUAD MAC Pro equipment (2x2.66ghz dualcore intel xeon) comes with a 3.Gigabit specification/ 300MB/sec. (Intel ESB2 AHCI, speed: 3.0 Gigabit. AHCI version 1.10 supported)...
And the benchmarks of the disk ST3500630AS show maximum 80MB/sec and a minimin of 37.3MB/sec, average 63.1 MB/sec. (anandtech tests).
According to seagate.com the maximum sustained data transfer rate:78MB/s
but in the mac the reallity is different: I am getting a transfer rate of 22MB/sec!!!!! . with out any application running and only making copy of the files!!!!
that means that the mac is only providing only 1/3 of the expected transfer rate for the disks..
so, is there a way that the MAC Pro gets all the normal transfer rate for those disks???
Is the Quad MAC Pro hardware unable to get the maximum throughput of the disks???
It seems that the mac is unable to get also the average transfer rate of those disks.. how to correct it???
thanks a lot
Alberto
ps. just for fun: I am getting a faster transfer rate from an old power pc ,and old pc, and firewire 400 and old ide disks!!! (36MB/seg!!!)

Yup.
BThe latest Mac Pro are better, so if you have a new or 2 month old unit, Seagate should work, though I think there should be later firmware.
Some would say those drives take the cake or woRSe.
http://www.barefeats.com/hard91.html
SEAGATE PUZZLES
+Firmware version 3.AEE or later solves the slow sustained large block write speed issue for a single 7200.10 inside the Mac Pro.+
+The remaining performance issue is slow small random read speeds for one, two, three or four drives. No matter how many drives you configure in RAID 0 sets, the average random read speed for combined block sizes from 64K to 1024K is less than 30MB/s (based on QuickBench 3 testing).+
+Until Seagate fixes this, we can't recommend the 7200.10 series as the ideal boot drive for the Mac Pro (or Power Mac).+
http://www.barefeats.com/quad08.html

HP LaserJet P1006 Print very slow with Windows 8.1

I have an HP LaserJet 1006 that is installed on Toshiba Laptop running Windows 8.1 and was working fine even from time to time it stop working at all, then I have to remove the software and then reinstall it again and then it works fine, last time I downloaded the Windows 8.1 Driver for the printer.
But this time, first I tried to remove the software but it didn't work; the printer still show up on the control panel - Devices and Printers. then some how I was able to reinstall the software , after that the printer is working but printing very slow even it is a LaserJet printer.
Please any one can help with that?
Thanks;
Waleed;

Hey @wmowafi,
Welcome to the HP Support Forums!
I understand that you're experiencing a slow printing issue on Windows 8.1 when printing to your HP Laserjet P1006 Printer. I would like to work with you today at resolving this issue. Now the only driver available for your product on Windows 8.1 is a hostbased plug and play basic generic driver. Therefore, there is limitations for what can be done for troubleshooting. As you stated, you have already attempted an uninstalled and reinstalled of the driver to no avail. I'm going to suggest some further steps and tools to resolve this issue for you.
Step 1: Uninstall Your Printer:
Disconnect your USB cable
Click the following link: Fix problems that programs cannot be installed or uninstalled to access the Microsoft Uninstall Tool.
Once the website opens, select Run Now on the right hand side
Allow the Tool to run.
When prompted choose Uninstall
A list of programs should populate and you're looking for the Laserjet. It may appear as LJ P1000 series. Please select the Laserjet series and Uninstall it.
If the Laserjet doesn't show in the list of programs than your Windows 8.1 computer does not see the Laserjet driver as properly installed.
Step 2: Clear the Temp Files:
Launch your Start screen by right clicking on the Windows icon on the bottom left of your screen or by select the Windows button on your keyboard located to the right of the Ctrl button.
Once the Start screen launches, type the word Run
Click on Run to launch it
In the Run box type %temp% and select OK
Once the Temp folder opens, hold down Ctrl + A at the same time on your keyboard and everything will highlight in the folder. Select 'Delete' on your keyboard. Don't worry, no files or folders on your actual computer will be removed during this process. If a file is still be used on your computer you will get a pop up to 'skip' the file
Once the Temp folder is emptied of its files, close the window
On your Desktop, right click on the Recycling Bin and left click on 'Empty Recycling Bin'
Restart you computer
Step 3: Reinstall the Laserjet P1006:
Please keep your USB cable disconnected
Click on the following link: HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
The driver page for your product will now launch
Select Download and allow the download to Run
Once the download is complete an extraction will automatically run and once completed the installer will launch
Run through the step-by-step on screen instructions.
Please do not plug in your USB cable until prompted
Ensure that your USB cable is plugged in from the rear of the printer directly to the computer. Avoid extenders or docking stations as they can cause printing and communication issues.
Test printing!
Please let me know if the steps I've provided resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

AIR 3.0 Application Built in HTML/Javascript VERY SLOW on Windows 7 and XP

Hello AIR Team,
The commercial AIR application I'm developing for a client (using HTML/CSS/Javascript) is VERY SLOW on my Windows 7 (64 bit) and Windows XP machines running on the Adobe AIR 3.0 runtime. I notice the poor performance in all aspects of the application, but especially on mouse events (mouseover, mouseout, click).
However, it runs very well on my Mac OS X 10.6.8 test machine AND from within Dreamweaver CS5.5 on my Windows 7 machine.
Chris Campbell from Adobe posted in another topic on this forum that he has notified the Adobe Webkit Team about this issue, but I'm anxious to know WHEN the Adobe AIR Team will release an AIR update/patch to resolve these performance issues.
Any ETA on the update/patch?
~Oscar

This performance issue is tracked in adobe bugbase: https://bugbase.adobe.com/index.cfm?event=bug&id=2958614
It is appreciated that anyone affected by this issue could leave vote notes about how the fix is important for you and your business.
Thanks,
Jian
Adobe Flash Runtime team

Access 2007 very slow on Windows 7

Access 2007 is running very slowly in on two new Windows 7 clients. By slow, I mean the response time within Access - moving from screen to screen is dreadfully slow, taking 30+ seconds on Windows 7 to do what a computer with Windows XP will do in
1 second.
I cannot find any information that addresses the issue.
We have been running Windows XP SP3 clients successfully for almost a year. The speed is virtually instantaneous. The Access file is hosted on a file server, Windows Server 2003, with SQL Server Express 2008. Nothing has changed on the
server. The Windows XP clients previously and currently experience no problems.
The first of 2 new computers were deployed with Windows 7, with OS pre-loaded from Dell. Microsoft update was run to update OS and Access. Once discovered that Access was running brutally slow, I used the other new PC to test. Windows 7
freshly installed. Office 2007 freshly installed. Tested - still slow. Ran Windows Update, then re-tested. Still slow.
The issue reminds me of the slowness experienced when we were developing the Access database on my laptop which was running Vista. So, it runs fine on XP, but not on Vista or 7.
I'm convinced the problem is a conflict with Windows 7 on the client, but cannot pinpoint it. I've searched these forums and Google for answers, but have not found any information that has specifically addressed this issue. Can anyone offer assistance?

After reading numerous forums , I was able to resolve
the following issues (Screens Freezing, Screens Lag/Flickers, combo/list boxes freezing whilst searching for data) by carrying out the following:
Creating a brand new copy of the MS Access database in MS Access 2007/2010 using the Windows 7 image
Importing the database objects (tables queries, forms, reports, macros and modules) into MS Access 2007 /2010 d/b within the Windows 7 image.
Setting the
MaxBufferSize of 16384 (Decimal), HKEY_LOCAL_MACHINE (regedit) onto various PCs as recommended by various forums.
Making sure that the relevant reference libraries have been selected for MS Access 2007. This should automatically set throughout the default
installation as demonstrated below:
Visual Basic For Applications
Microsoft Access 12.0 Object Library
OLE Automation
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.5 Library
Also by typing in the following words into Google, provided me with some solutions, however the instructions above allowed me to rectify the issues
experienced above.
MS Access 2007 slow in Windows 7
MS Access 2007 and Windows 7 issues
MS Access 2007 freezes
Performance slow with MS Access and Linked Tables
Slow performance windows 7 using MS Access

InDesign 5.5 scrolling very slow on Macbook Pro

Hi,
I am using InDesign CS 5.5 (7.5.3) on a Macbook Pro - 2.4 Ghz Intel Core i7 w/ 8GB Ram and a 250GB SSD and AMD Radeon HD 6770M graphic card - and it's incredibly slow when scrolling up and down in a document. Admittedly that document has lots of big tifs embedded but still it feels very slow and often hangs on the spinning wheel. I've tried a helper app to switch the graphic cards and have also turned preflight off and set live screen drawing to delayed after reading some threads on here. It's especially bad when I come from another application but doesn't seem to make a difference how many other apps are open. Is this normal? Does anyone have any ideas how to improve performance?
Thanks
Maak

What about the display perfomance ?
Go to View-->Diaply performance, set it to Fast or Typical.
Here are few link that could help :-
http://helpx.adobe.com/indesign/kb/slow-performance-indesign-cs5.html
http://indesignsecrets.com/why-is-indesign-soooo-slow.php

Safari brow. very slow on windows platform. Why ?

Hello everyone!
I am Italian and this is my first post, and I want your help.
Using Safari on a Vaio Sony with Windows XP SP3, and I have a big problem:
The opening of the Safari browser when the computer is very..very slow!
Indeed, to start Safari it takes from 40 to 50 seconds, and other
sometimes even more ... how can I solve this problem?
Thank you all !
massimo

I seems to have the same problem too!
It is like Safari is frozen but this only happen when I first launch Safari. After about a minute or so, Safari 'wakes up' and start loading web pages, and browsing seems to be fine. This issue I think started ever since I install XP SP3.
I am using AMD Atholon 64 X2 3800, with 2GB of RAM. Checked Task Manager and Safari is only using around 90MB so it is not hogging all the memory. Not sure why this happen.
Now I just start Safari, walked away for a coffee and leave it running throughout.

Firefox 22 running very slow on windows 7 but no problem in linux. Help

Firefox 22 is running very slow ( rather stalling forever) on windows 7.
I tried resetting option from the "Troubleshooting information" menu and also tried disabling "Hardware acceleration" but still having the problem.
Takes almost a minute ( "New window not responding"..) just to try any option..like opening a new tab.
I have same version on linux mint and but FF runs smoothly.

Sorry, not an option. As I said, I have binned FF22 and gone back to 21 -- and it works just as fast as it always did, corrupt profile or no corrupt profile.

Time Capsule connection is very slow on windows 8

Time Capsule wireless connection is very slow on a Samsung windows 8 computer.
Any advice? It is placed next to my mac and the speed is 20% less (often more)
If I move the computer into the livingroom (about 10 meter) the speed is reduced with 95%.

Windows 8 drivers are still developing.. download the drivers from the wireless manufacturer not Samsung and try it.
I am not surprised though at differences between wireless.. card using different chipsets and different antennas will give totally different results.
But you can help a bit.. setup the TC with SMB names.. short, no spaces, pure alphanumeric.
Set the name for 5ghz different to 2.4ghz so you can change over.
Set the security to WPA2 Personal which is the only one suitable for N wireless at home without a server.
Set 2.4ghz to manual radio channels and test, channel 1, 6, 11 in turn.
Try up close using 5ghz as it is faster.. but to get full speed you need a broadcom 450mbps card..
Remember wireless chipset like atheros and broadcom never quite see eye to eye.. it is one reason you buy the same brand.
Solution.. buy a cheap edimax wireless router.. plug it into the TC and use it for wap only.. I just did this for a friend.. works much better than TC or airport extreme on a PC. But I have not used win8 yet.. no idea if that is going to be problematic.

MMC Snapin Shared folders very slow on windows 7

After the roll out of windows 7 i installed the RSAT SP1 on the 7 32 bit machine.
Here i created a mmc snap in with users and computers and active sessions.
The users and computers are running fine but the active sessions very slow, on xp it was running great.
I allready turn off netbios over tcp/ip and deleted the cache on the win 7 client, no result.
In our environment (2003r2 and 2008r2) i am not allowed to change adapter settings of the servers.
Is there a fix for the client site with RSAT?

Hi,
We may test the issue via the steps below.
1. Click Start, type in Secpol.msc and press Enter.
2. Expand "Local Policies" and select "Security Options"
3. Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
4. Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
5. Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
6. Change the setting from "require 128 bit" to unchecked (No Minimum)
7. Click OK, and exit.
Kim Zhou
TechNet Community Support

Very slow login window on wake

My MacBook Air is very slow to wake to the login screen. It asks for my password every time, as I like it, but every time I open the lid, it's a good 10 seconds before I can even type my password. The screen turns on, but the text box isn't selected and nothing responds to keys, until about the 10 second mark, when it all seems to jolt on again, and I can log in.
It's not life-threatening, just an annoyance.
Most significantly, there is a log in the console every time I log in with the same message:
28/11/12 11:40:19.206 PM loginwindow[3191]: find_shared_window: WID -1
28/11/12 11:40:19.206 PM loginwindow[3191]: CGSSetWindowTags: Invalid window 0xffffffff
Apparently the loginwindow process is trying to find some specific window with an invalid address (0xffffffff is a little odd for a window's address, don't you think?). Of course, this problem persists over reboots, even when I've killed every single non-standard process.
Is anybody else experiencing this? And if so, has anyone worked out a solution?

Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click the line below to select it, then drag or copy the text — do not type it — into the Terminal window and press return:
pmset -g
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

My internet has become very slow on Macbook Pro

I don't know what happened but since few days my internet has become very slow on all sites It takes ages for a youtube video to be played. I sometimes to refresh a page for it to appear.
Safari, Firefox and Chrome all 3 have become very slow.
I tried changing my wireless internet 3 times but all the time it is slow.
I have had my laptop for more than 3 years now.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;gsub(/[-0-9A-Fa-f]{22,}/,"UUID");if($0~"/Users"&&$0!~"/Shared") gsub(/\/Users\/[^ \/]+/,"/Users/USER");if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Java 2D very slow with Windows XP

Hi all!
I'm writing an isometric game engine using Java 2D API, in full-screen exclusive mode and using all the advantages of the new VolatileImage class. The engine is almost finished, I'm testing it putting some animated players on screen and showing the frame rate of the engine. Everything went right, frame rate was very high in Linux and Windows 98/Me. But when I try to run the engine on Windows XP I can only get 5 or 6 fps!!!! And I don't know why!! It seems that XP makes Java run very slow... at least when using Java2D...
Please, anyone knows why the performance is reduced??? Is there a new JRE release for Windows XP?? I'm using JDK 1.4.1.
Thanks for your help.

If you're using the Fullscreen API, then you're using BufferStrategy, thus you shouldn't use VolatileImages, it does this for you in the background. You shouldn't create any buffers, simply use the one provided. I'm assuming your problem probably lies in transparency. I've made an isometric engine using the fullscreen API that has run with complete 60fps page flipping. I would assume your bottle-neck lies in:
Transparencys (These are very slow, there is a way to make a bitmask, much like you'd do in DirectX)
Dynamic Memory allocation/Alpha rendering in your animation loop. (You need to allocate ALL of the colors you're going to use, and avoid using an alpha component if you want to avoid the VM getting bogged down by the garbage collector because you're allocating 30 Color objects a second).
I made a Color object that was some what hacked together that has methods to allow you to access it's values for doing this kind of thing, allocating your scheme before hand is an easier approach.
The method that performs the page flipping is a BLOCKING method, so you should orient your drawing before it, and not assume it's simply placing a request, like repaint does.
-Jason Thomas.

Coveflow very slow with Windows Vista

Salut à tous
Avant je n'ai jamais eu de probleme avec Itunes mais après un formatage et avoir remis mes chansons, les coveflows étaient rapide.
Mais maintenant c'est lent pourtant mon pc est très puissant donc ca ne peux pas venir de la
que faire ?
Hello everybody
Before I never had problem with Itunes and coverflow had perfect but after a formatting and to have given my songs, the coveflows are very slow
my PC is very powerful and that cannot come from
what to make?
hanks

The Windows SP2 pre installed is the problem... I have an Equiumn A60, when I bought I noticed it takes too much time to load the windows xp.. so I formatted the hard disk and I've installed the Windows XP professional SP1, now it's two times faster to load and operate than before...
Try to install another windows, professional and SP1 You'll see the diference, and do not worry about the drivers , the windows installs all the drivers itself...
sorry for my english guys
[Edited by: admin]

WebDav Very Slow on Windows 7 Pro

Similar Messages

Maybe you are looking for