WebDev Install with JDeveloper and WLS

I'm familiar with the installation of a JDE WebDev Client and now I've been tasked with a JDeveloper 11.1.1.2 and WLS install. Is there any good guides on how to set this up?
EnterpriseOne 811
Tools 8.98.3.1
Any help would be greatly appreciated.
Thank you,
Al

Hi Al,
Try this:
https://support.us.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=1302209.1
This doc explains what components you need to have on a E1 Client that will be used to build and deploy BSSV Packages to a Bus Services Server. The Combination of JDeveloper and WLS probably indicates that you are intending to setup a Bus Services Server. However, this is only supported as of 811SP1.
If you are running 811SP1, the process of setting up a Bus Services Server involves:
- defining a BSSV instance via Server Manager
- setting up a E1 Client with JDeveloper that will be used to build and deploy a Business Services Package
The following doc has useful links to the MTRs for Bus Services Server as well as other useful resources on BSSV.
https://support.us.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=967281.1
Edited by: user621397 on 15/04/2012 22:03
Edited by: user621397 on 15/04/2012 22:04

Similar Messages

My macbook pro was first installed with leopard and bootcamp 3.2. Now i updated to lion. The problem is now that it is not possible to update to bootcamp 3.3. or 4.0. The report: The installation source is not correct. What can i do? Thanks for answer.

my macbook pro was first installed with leopard and bootcamp 3.2 under windows 7. After update to lion it is no more possible to update bootcamp to 3.3. or 4.0. The report: The installation source ist not correct. What can i do?
auf Deutsch:
Auf meinem Macbook pro war Leopard und bootcamp 3.2 unter windows 7 installiert. Nach dem update auf lion kann bootcamp nicht mehr upgedatet werden. Weder auf 3.3. noch auf 4.0. Folgende Fehlermeldung kommt: Boot camp Dienste: Das installierte Produkt stimmt nicht mit der Installationsquelle überein. ... Was kann ich tun?

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

HELP: include another page in with JDeveloper and ADF

Hi all,
I am trying to make a layout page with JDeveloper and ADF. But I just can't make things work. I have the pre-coded header and footer html pages and want to include them in a jspx somehow. I tried panelPage too, but the rendering style is away from our pre-coded header and footer.
1. Use jsp:include.
header works fine but footer is rendered before the page content, even if the footer is placed after the page content. Is there a way to customize the position?
<f:facet name="footerFacet">
<f:subview id="footerView"
binding="#{backing_welcomePage.footerView}">
<jsp:include page="/footer.jspf"/>
</f:subview>
</f:facet>
2. Use frameBorderLayout.
I followed the doc and use the document tag. But the frame page is rendered but none of included pages are rendered. So I got a blank page.

<f:view>
<afh:html>
<afh:head title="my frame page">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body>
<afh:frameBorderLayout height="100%" width="100%">
<f:facet name="center">
<afh:frame source="topPage.jspx" name="topPage3"/>
</f:facet>
<f:facet name="top">
<afh:frame source="topPage.jspx" height="200" name="topPage2"/>
</f:facet>
<f:facet name="bottom">
<afh:frame source="topPage.jspx" height="200" name="topPage1"/>
</f:facet>
</afh:frameBorderLayout>
</afh:body>
</afh:html>
</f:view>

<f:view>
<af:document title="FrameBorderLayout Demo">
<af:form>
<af:panelGroup layout="vertical">
<f:facet name="separator">
<af:objectSeparator />
</f:facet>
<af:outputFormatted styleUsage="instruction" value="<b>A frameBorderLayout</b>"/>
</af:panelGroup>
</af:form>
</af:document>
</f:view>

for #1 have you tried throwing a verbatim tag around your includes like:
<f:verbatim>
<jsp:directive.include file="/includes/footer.jsp"/>
</f:verbatim>
it's how we got around intermixing html and jsf

Develope complex WebService with JDeveloper and deploy to tomcat

Hello,
I am thinking of developing a complex WebService with JDeveloper and deploy it to tomcat.
The WebService should retrieve a few "normal" datatypes and a pdf and a few images. I try to store the pdf and the image in an Oracle DB as BLOB.
My idea ist to create a Package which selects the values, pdf and the image and retrieve them as the output paramter.
Then I want to create a WebService with the JDeveloper which calls this Package. This WebService should be published on a Tomcat.
My first question is if that is possible?
I think there are few problems.
I searched the forum about deploying a JDeveloper WebService to Tomcat, but I can not find a whole solution which is going to work. I read something about JAX-RPC, but I am new to this topic. So it would be very nice, if anyone could tell me where I can find the solution or post a quick guide to solve that.
Another question is how I have to decode the images and the pdf to provide those files in a WebService?
I would be very glad if anyone can help me or tell me where I can find information about that, becaus I am new to this topic!
Thank you,
Tim

Hi,
does anybody have an idea about that?
Thanks,
Tim

Timesten with JDeveloper and ADF

Hello,
I'm using Timesten with Jdeveloper and ADF and have noticed some problems which I allready posted in the JDevloper Forum:
Re: ADF TimesTen
These problems arise from using Identifiers with reserved words, which is not forbidden with Ora DB.
The settings in Jdev are to generate SQL92 conform code. This is the only way it works.
I'm wondering if there is a setting to make TT behave syntactical 1:1 like a Ora DB.
I even tried to change the Type Mode to Oracle and restarting TT but this doesn't help eighter.
Maybe someone of the TT pro's has a solution for this? TT is used as a cache in front of an Ora DB so it should understand the Ora Syntax ??
Thanks
Ognian

for #1 have you tried throwing a verbatim tag around your includes like:
<f:verbatim>
<jsp:directive.include file="/includes/footer.jsp"/>
</f:verbatim>
it's how we got around intermixing html and jsf

Macbook Pro with SSD (optibay) and HDD. Want to clean install with discs and move hard drives.

Hi all,
I have bought a used Macbook Pro 15' i5 Mid 2010 in brilliant condition. It came with original HDD in main Hard drive space and and SSD in an optibay. This all works fine and came with Mavericks already installed.
I want to start using the laptop like from new as there is nothing on there i currently need atm and dont want problems in the future with my apple id not being the original installer of mavericks. (had a similar problem previously on a used macbook white that had lion on)
What i want to do is erase and move the SSD to the main hard drive bay (have read this is preferred) and a clean install using install discs that came with it onto the SSD. Then install the HDD into the optibay or external enclosure and reinstall optical drive, not sure on that one yet.
My main questions are about the process i should use. There is nothing i need to back up or anything as this is effectively a new machine to me. Shall i simply erase the SSD (currently contains the OS) and install it in main hard drive bay and run install discs to install original OS (10.6.3)? Is it that simple? Any tips on erasing SSD would be useful also?
Also as the machine currently boots from the SSD that is in the optibay, is there anything that tells the machine to boot from that hard drive as apposed to the main HDD bay or does it just know? If there is, when i install the SSD into main hard drive bay how do i tell the machine i have done so and to boot from there?
The other thing i may do is buy a new SSD and do a new install on that and leave the current SSD in the optibay and use that for storage. Undecided on that yet.
Any help will be much appreciated. Thanks.
Sam

To do what you want, and the only way to do what you want legally and physically, you will need a set of Original System Reinstall DVD Discs. Without them you can't do what you want as the install of Mavericks that is now on it is TIED to the previous owners Apple ID and can not be transferred and or Reinstalled without knowing that persons Apple ID. And even iof you knew it it would still be TIED to that Apple ID and not yours.
So did the previous owner supply the Original System Reinstall DVD disc Set? If not you will need to order them from Apple.

J2EE with JDeveloper and postgresql

Hi folks,
I'm creating a j2ee app (struts) with jdev with oracle9i
and this work fine...
but I have try connect with another database
(postgresql 7.4) to recovery some data
and the local container of jdev is not recognizing
the postgresql driver...
where I do to make the internal container
work with jdbc postgre driver ?

To configure the the PostgreSQL JDBC driver:
1. Select Tools>Preferences in JDeveloper.
2. In the Preferences frame, select the Database Connections node. Select Library New button.
3. Select the Registered JDBC Drivers field New button.
4. In the Driver Class field specify org.postgresql.Driver
5. Select Library field New button.
6. In the Create Library frame specify a Library Name, and add the PostgreSQL JDBC jar file pg74.215.jdbc2.jar to the Class Path field.
The PostgreSQL JDBC driver library gets added to the Preferences frame.

PA3541U-2PRP dynadock vga cannot install with win7 and latest drivers

Hello, I need help installing this on a Tecra A8 S8513. I have Win7 professaional installed and I've tried to install the dynadock with all variations of drivers, letting Windows discover and install (bad 5.3 core was found) and using 7.03 and 7.1, 6.3 and 6.2. None of them stop the infinite loop of the graphics setting for the first time and none of them solve the generic usb hub that it should have. It's like the install is connecting and disconnecting in an infinite loop. I've also tried (after dynadock failures) plugging in a usb mouse and the vga/rgb monitor directly to the three usb hubs in the rear and they don't even come up as new hardware. I've searched here and all over the internet for solutions. None have helped.

The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30)

Any Experiences with OODBMS and WLS (also Javlin or VEJB)

Hi guys,
we are evaluating WLS in combination with OODBMS and RDBMS. Has anybody
done this before and want to give us some hints on it. We take a look at
Versant and Object Store versus Oracle 8i. We have to build a high
traffic site with approx. 1000 hits/sec. We intend to modell the
business logic in the EJB Modell. We have to present product-infos, news
etc from a database. There are to pretty new containers out there :
Javlin and VEJB(Versant). Has anybody experience with these products ?
As I learn from this newsgroup there seem to be some performance
problems regarding Entity Beans. I would like to know if this problems
occur with OODBMS or RDBMS or both. Is the Container the bottlenack or
the database ? It seems that from the performance point of view
stateless Session Beans with pooled jdbc-Connections are the best
solution. Is this right. Has anybody put in Java-Instances right in an
OODBMS without involving a container ? What experiences have you made ?
Thanks for your help
regards Oliver

Oliver,
I suggest contacting the ODI or Versant folks. They can provide a wealth of
benchmarks that explain why they're up there in performance with RDBMSes.
Michael Girdley
BEA Product Manager
Oliver Renz <[email protected]> wrote in message
news:[email protected]..
Hi guys,
we are evaluating WLS in combination with OODBMS and RDBMS. Has anybody
done this before and want to give us some hints on it. We take a look at
Versant and Object Store versus Oracle 8i. We have to build a high
traffic site with approx. 1000 hits/sec. We intend to modell the
business logic in the EJB Modell. We have to present product-infos, news
etc from a database. There are to pretty new containers out there :
Javlin and VEJB(Versant). Has anybody experience with these products ?
As I learn from this newsgroup there seem to be some performance
problems regarding Entity Beans. I would like to know if this problems
occur with OODBMS or RDBMS or both. Is the Container the bottlenack or
the database ? It seems that from the performance point of view
stateless Session Beans with pooled jdbc-Connections are the best
solution. Is this right. Has anybody put in Java-Instances right in an
OODBMS without involving a container ? What experiences have you made ?
Thanks for your help
regards Oliver

Version incompatibility with UCM and WLS

Dear All,
I just have some confusion.
I have installed WLS 10.3.4 and houses the Webcenter 11G PS3 (11.1.14) also.
But when I download the UCM 11GR1, I notice that it says it is not compatible with my Weblogic.
I think I have downloaded the wrong version, I am looking for UCM 11G download to match my already
setup domain but when I check the older release at OTN, i only can find Oracle Universal Content Management 10gR3 Downloads.
Is this the same or is this copatible with my WLS?
Thanks

Hi Jose,
This is a known interoperability problem with MS SOAP toolkit, which send what is refered to as untyped request. You have an option to accept untyped request in oc4j - look at section 12.2 of the 10.1.2 Web services guide [http://download-west.oracle.com/docs/cd/B14099_04/web.1012/b14027/custom.htm#BABEJDEC]. The tag is <accept-untyped-request> .
Hope this helps,
Eric

Forms 11 install with Jdeveloper installed need weblogic install?

I'm trying to install forms11 and have the lastest version of jdeveloper installed that has a weblogic server. Do i still need to install weblogic server before installing forms11?
Edited by: ow008339 on 10-Aug-2009 01:37

I first installed the latest version of JDeveloper allowing it to install in all the default locations. This installed to c:\oracle\middleware. I then installed forms 11 into the middleware directory. I went with most of the default values on the install, this is the configuration I ended up with for forms. When I was installing forms at one point it said "Setup Complete" and my pc seemed to hang for about 15 minutes before it started the configuration section.
Middleware Home Location: C:\oracle\Middleware
          Oracle Home Location: C:\oracle\Middleware\forms1120090810_1
          Oracle Instance Location: C:\oracle\Middleware\asinst_1
          Oracle Instance: asinst_1
          Domain Option: Create Domain
          Domain Name: forms11
          Domain Home: C:\oracle\Middleware/user_projects/domains/forms11
          Domain Host Name: pcname
          Domain Port No: 7001
          User Name: weblogic/weblogic1
          Automatic Port Detection: true
          Administrator Console: http://pcname:7001/console
          EM Console: http://pcname:7001/em
          EMAgent URL: http://pcname:5155/emd/main
          Forms URL: http://pcname:8888/forms/frmservlet
          Reports URL: http://pcname:8888/reports/rwservlet

[Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts

I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot. When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
[ 24.856]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 24.857] X Protocol Version 11, Revision 0
[ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 24.857] Build Date: 31 July 2014 11:53:19AM
[ 24.857]
[ 24.857] Current version of pixman: 0.32.6
[ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.897] (==) ServerLayout "Layout0"
[ 24.897] (**) |-->Screen "Screen0" (0)
[ 24.897] (**) | |-->Monitor "Monitor0"
[ 24.905] (**) | |-->Device "Device0"
[ 24.905] (**) |-->Input Device "Keyboard0"
[ 24.905] (**) |-->Input Device "Mouse0"
[ 24.905] (==) Automatically adding devices
[ 24.905] (==) Automatically enabling devices
[ 24.905] (==) Automatically adding GPU devices
[ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24.914] (==) FontPath set to:
/usr/share/fonts/misc/
[ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24.914] (WW) Disabling Keyboard0
[ 24.914] (WW) Disabling Mouse0
[ 24.914] (II) Loader magic: 0x818d80
[ 24.914] (II) Module ABI versions:
[ 24.914] X.Org ANSI C Emulation: 0.4
[ 24.914] X.Org Video Driver: 18.0
[ 24.914] X.Org XInput driver : 21.0
[ 24.914] X.Org Server Extension : 8.0
[ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.919] (II) LoadModule: "glx"
[ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.974] compiled for 4.0.2, module version = 1.0.0
[ 25.974] Module class: X.Org Server Extension
[ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
[ 25.974] (II) LoadModule: "nvidia"
[ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 26.027] compiled for 4.0.2, module version = 1.0.0
[ 26.027] Module class: X.Org Video Driver
[ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
[ 26.042] (II) UnloadModule: "nvidia"
[ 26.042] (II) Unloading nvidia
[ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 26.042] (EE) No drivers available.
[ 26.042] (EE)
Fatal server error:
[ 26.042] (EE) no screens found(EE)
[ 26.042] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.042] (EE)
It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log. My dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
[ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048381
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2333.276 MHz processor
[ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
[ 0.006685] pid_max: default: 32768 minimum: 301
[ 0.006695] ACPI: Core revision 20140424
[ 0.012534] ACPI: All ACPI Tables successfully acquired
[ 0.013368] Security Framework initialized
[ 0.013377] Yama: becoming mindful.
[ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018300] Initializing cgroup subsys memory
[ 0.018326] Initializing cgroup subsys devices
[ 0.018334] Initializing cgroup subsys freezer
[ 0.018338] Initializing cgroup subsys net_cls
[ 0.018344] Initializing cgroup subsys blkio
[ 0.018375] CPU: Physical Processor ID: 0
[ 0.018376] CPU: Processor Core ID: 0
[ 0.018379] mce: CPU supports 6 MCE banks
[ 0.018387] CPU0: Thermal monitoring enabled (TM2)
[ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.019569] ftrace: allocating 20434 entries in 80 pages
[ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083412] x86: Booting SMP configuration:
[ 0.083415] .... node #0, CPUs: #1 #2 #3
[ 0.130014] x86: Booted up 1 node, 4 CPUs
[ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
[ 0.133346] devtmpfs: initialized
[ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
[ 0.137923] pinctrl core: initialized pinctrl subsystem
[ 0.137968] RTC time: 1:49:28, date: 09/18/14
[ 0.138025] NET: Registered protocol family 16
[ 0.138158] cpuidle: using governor ladder
[ 0.138160] cpuidle: using governor menu
[ 0.138185] ACPI: bus type PCI registered
[ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138270] PCI: not using MMCONFIG
[ 0.138272] PCI: Using configuration type 1 for base access
[ 0.153430] ACPI: Added _OSI(Module Device)
[ 0.153430] ACPI: Added _OSI(Processor Device)
[ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157331] ACPI: Dynamic OEM Table Load:
[ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.157716] ACPI: Dynamic OEM Table Load:
[ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158103] ACPI: Dynamic OEM Table Load:
[ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158489] ACPI: Dynamic OEM Table Load:
[ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158833] ACPI: Interpreter enabled
[ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.158859] ACPI: Using IOAPIC for interrupt routing
[ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.165516] PCI host bridge to bus 0000:00
[ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
[ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
[ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
[ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
[ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
[ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
[ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
[ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
[ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
[ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
[ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
[ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
[ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
[ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.169663] pci 0000:02:00.0: supports D1 D2
[ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
[ 0.170025] pci 0000:01:05.0: supports D1 D2
[ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171253] vgaarb: loaded
[ 0.171253] vgaarb: bridge control possible 0000:04:00.0
[ 0.171253] PCI: Using ACPI for IRQ routing
[ 0.179597] PCI: pci_cache_line_size set to 64 bytes
[ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.179795] NetLabel: Initializing
[ 0.179797] NetLabel: domain hash size = 128
[ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.179813] NetLabel: unlabeled traffic allowed by default
[ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.181019] Switched to clocksource hpet
[ 0.187008] pnp: PnP ACPI init
[ 0.187030] ACPI: bus type PNP registered
[ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
[ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
[ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188133] pnp: PnP ACPI: found 8 devices
[ 0.188135] ACPI: bus type PNP unregistered
[ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197657] NET: Registered protocol family 2
[ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.198193] TCP: reno registered
[ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198298] NET: Registered protocol family 1
[ 0.199202] pci 0000:04:00.0: Boot video device
[ 0.199211] PCI: CLS 32 bytes, default 64
[ 0.199266] Unpacking initramfs...
[ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
[ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
[ 0.265383] Scanning for low memory corruption every 60 seconds
[ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268226] zbud: loaded
[ 0.268426] VFS: Disk quotas dquot_6.5.2
[ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.268644] msgmni has been set to 7909
[ 0.268709] Key type big_key registered
[ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.269162] io scheduler noop registered
[ 0.269165] io scheduler deadline registered
[ 0.269227] io scheduler cfq registered (default)
[ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269839] intel_idle: does not run on family 6 model 23
[ 0.269876] GHES: HEST is not enabled!
[ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.270599] Linux agpgart interface v0.103
[ 0.270658] rtc_cmos 00:01: RTC can wake from S4
[ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.270984] TCP: cubic registered
[ 0.271114] NET: Registered protocol family 10
[ 0.271372] NET: Registered protocol family 17
[ 0.271821] registered taskstats version 1
[ 0.272365] Magic number: 14:261:812
[ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
[ 0.272539] PM: Hibernation image not present or could not be loaded.
[ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.273769] Write protecting the kernel read-only data: 8192k
[ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.286420] systemd-udevd[59]: starting version 216
[ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.305975] ACPI: bus type USB registered
[ 0.306007] usbcore: registered new interface driver usbfs
[ 0.306020] usbcore: registered new interface driver hub
[ 0.306135] usbcore: registered new device driver usb
[ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.307076] ehci-pci: EHCI PCI platform driver
[ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
[ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
[ 0.315748] SCSI subsystem initialized
[ 0.317397] libata version 3.00 loaded.
[ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.323598] hub 1-0:1.0: USB hub found
[ 0.323608] hub 1-0:1.0: 4 ports detected
[ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
[ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
[ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.336926] hub 2-0:1.0: USB hub found
[ 0.336936] hub 2-0:1.0: 8 ports detected
[ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 0.337866] hub 3-0:1.0: USB hub found
[ 0.337875] hub 3-0:1.0: 2 ports detected
[ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 0.338347] hub 4-0:1.0: USB hub found
[ 0.338355] hub 4-0:1.0: 2 ports detected
[ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.338786] hub 5-0:1.0: USB hub found
[ 0.338794] hub 5-0:1.0: 2 ports detected
[ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 0.339235] hub 6-0:1.0: USB hub found
[ 0.339244] hub 6-0:1.0: 2 ports detected
[ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[ 0.339667] hub 7-0:1.0: USB hub found
[ 0.339675] hub 7-0:1.0: 2 ports detected
[ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[ 0.340109] hub 8-0:1.0: USB hub found
[ 0.340117] hub 8-0:1.0: 2 ports detected
[ 0.340263] ahci 0000:00:1f.2: version 3.0
[ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.374399] scsi0 : ahci
[ 0.374615] scsi1 : ahci
[ 0.374814] scsi2 : ahci
[ 0.375005] scsi3 : ahci
[ 0.375196] scsi4 : ahci
[ 0.375388] scsi5 : ahci
[ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
[ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
[ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
[ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
[ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
[ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
[ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.754296] hub 1-2:1.0: USB hub found
[ 0.754373] hub 1-2:1.0: 7 ports detected
[ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
[ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
[ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.340399] ata3.00: configured for UDMA/133
[ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.500227] scsi6 : usb-storage 2-5:1.0
[ 1.500322] usbcore: registered new interface driver usb-storage
[ 1.500694] usbcore: registered new interface driver uas
[ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
[ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
[ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
[ 2.266750] Switched to clocksource tsc
[ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
[ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586591] usbcore: registered new interface driver usbhid
[ 2.586594] usbhid: USB HID core driver
[ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
[ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
[ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
[ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
[ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 2.628682] ata6.00: configured for UDMA/100
[ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
[ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
[ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
[ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
[ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
[ 3.257551] hub 1-2.7:1.0: USB hub found
[ 3.257622] hub 1-2.7:1.0: 4 ports detected
[ 3.316702] floppy0: no floppy controllers found
[ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.027733] random: nonblocking pool is initialized
[ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 4.403452] systemd[1]: Detected architecture 'x86-64'.
[ 4.434571] systemd[1]: Set hostname to <yte>.
[ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.264334] systemd[1]: Starting Remote File Systems.
[ 5.264630] systemd[1]: Reached target Remote File Systems.
[ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.265067] systemd[1]: Starting Paths.
[ 5.265331] systemd[1]: Reached target Paths.
[ 5.265342] systemd[1]: Starting Encrypted Volumes.
[ 5.265614] systemd[1]: Reached target Encrypted Volumes.
[ 5.265625] systemd[1]: Expecting device dev-sda3.device...
[ 5.265819] systemd[1]: Expecting device dev-sda6.device...
[ 5.266013] systemd[1]: Starting Root Slice.
[ 5.275815] systemd[1]: Created slice Root Slice.
[ 5.275829] systemd[1]: Starting User and Session Slice.
[ 5.276279] systemd[1]: Created slice User and Session Slice.
[ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.277824] systemd[1]: Starting udev Kernel Socket.
[ 5.278109] systemd[1]: Listening on udev Kernel Socket.
[ 5.278123] systemd[1]: Starting udev Control Socket.
[ 5.278410] systemd[1]: Listening on udev Control Socket.
[ 5.278424] systemd[1]: Starting Journal Socket.
[ 5.278716] systemd[1]: Listening on Journal Socket.
[ 5.278736] systemd[1]: Starting System Slice.
[ 5.279185] systemd[1]: Created slice System Slice.
[ 5.279201] systemd[1]: Starting File System Check on Root Device...
[ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.371945] systemd[1]: Mounting Temporary Directory...
[ 5.379927] systemd[1]: Starting system-getty.slice.
[ 5.380442] systemd[1]: Created slice system-getty.slice.
[ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.503309] systemd[1]: Started Load Kernel Modules.
[ 5.503363] systemd[1]: Starting Apply Kernel Variables...
[ 5.504202] systemd[1]: Mounting Configuration File System...
[ 5.504898] systemd[1]: Mounted FUSE Control File System.
[ 5.504935] systemd[1]: Mounting Huge Pages File System...
[ 5.505656] systemd[1]: Mounting Debug File System...
[ 5.506353] systemd[1]: Starting Setup Virtual Console...
[ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
[ 5.507863] systemd[1]: Starting Journal Service...
[ 5.508912] systemd[1]: Started Journal Service.
[ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 5.836201] systemd-udevd[175]: starting version 216
[ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.237029] ACPI: Power Button [PWRB]
[ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.237092] ACPI: Power Button [PWRF]
[ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
[ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
[ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.697724] sound hdaudioC0D0: inputs:
[ 6.697726] sound hdaudioC0D0: Front Mic=0x19
[ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
[ 6.697731] sound hdaudioC0D0: Line=0x1c
[ 6.697732] sound hdaudioC0D0: dig-in=0x1f
[ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
[ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
[ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
[ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
[ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
[ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.852178] iTCO_vendor_support: vendor-support=0
[ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
[ 6.962065] mousedev: PS/2 mouse device common for all mice
[ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
[ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 9.356701] floppy0: no floppy controllers found
[ 10.274611] r8169 0000:02:00.0 enp2s0: link down
[ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.871962] r8169 0000:02:00.0 enp2s0: link up
[ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies. Would anyone be able to see where I am going wrong?
Last edited by meschael (2014-09-18 04:16:08)

The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30)

Adobe acrobat 8 won't install with Indesign and Dreamweaver CS4

I have a client who I had to build a new computer for which is Windows XP Pro. On her original machine I had AA8, InDesign CS4, DreamWeaver CS4, Contribute CS5, Adobe Reader 9.3 and Adobe Photoshop 6. I have tried puting AA8 on the new machine that has all of the above on it and I get a response that I have a newer version of AA and it won't install. I don't have any AA on this machine so I'm not sure what to do. She says she can't edit PDFs or combine them and that she can't create a PDF ind Word and Xcel and edit them. Should I tell her to upgrade to AA9 so that it is compatible to the CS4/5 products?
Thanks,
Lgarn

Thank you Bill for replying.
I have been able to install the disc but it tells me that I have to activate it with a time limit of 30 days and counting. Activation fails each time I've tried. As I'm nearing the end of the time limit I decided to contact Adobe for advice. They gave me a download package and new serial number but it's only suitable for OS XP and Windows 2000 so I'm unable to download it. I was told by the advisor if I still had problems to use the forum as a means of support so that's why I'm talking to people here.
I have uninstalled Adobe Acrobate Pro 7, so I might try reinstalling the disc to see if it gives me another 30 days grace, that, at least, would be a way around it.
I'll now follow the link you've given me. Though I do suspect I'm in a bit of a cul de sac.

Best practice: team based development with JDeveloper and CVS?

Hi all!
I was wondering of what is the best way to work with Jdev 9i and cvs on a same project with 5 developers whereas
all developers use the same JPRs and JWS?
Which of the files should be checked in to the central CVS repository, which should be remained on the local machine of each developer?
I assume, all java and xml files might be stored in the cvs repository. But how can we make sure that new files written by a member of the team will be added to my project?
If we also check in the JPR and CFG files the merge of concurrent JPRs will fail and our project will be shreddered ;-)
My question: what is your best experience with simultanous development on same projects?
Any idea?
Many thanks,
Stefan

1. Put everything that your project needs under CVS control:
- buildscripts
- BC4J jarfiles
- BC4J generated files (java, xml, xcfg, jpx, cpx)
- .properties, package.html, gif, ...
- docu
- install scripts
- starter batch or exec, ...
2. Each developer should have a own JPR and JWS file. In a seperate location those files could be checked in frequently to easy allow the setup of a new Developer workstation
3. Use a sourcecode formatter (e.g. jalopy) on the BC4J generated java files to reduce merge conflicts because of empty lines generated by JDev dialogs
4. Adding new files is no problem:
- if you add new BC4J objects (AM, VO, ASC, EO, VL) also checkin the bc4j package XML so new files will be added.
- set in project settings common / input paths - "Scan source path ..."
5. Deleting BC4J files is a problem, because JDev does not automatically remove them from the project. So if someone deletes BC4J objects, you should close the project and delete it manually from the jpr file
6. Close the project before making a CVS update wih external tool like Tortoise because of JDev caches
Regards, Markus

NI-IMAQ for USB 1.1.1 will not install with LV8 and Vision 8.0 or 8.21

When I try to install NI-IMAQ for USB 1.1.1 I get a message that vision 7.1 or higher with Labview 7.0 or higher; or Vision Assistant 7.1 or higher is required, I have tried the vision 8.0 and vision 8.2.1 packs with Labview 8.0 with no success.

Hello mcg,
I am not familiar with NI-IMAQ for USB 1.1.1. The newest version I know of that we have is 1.0 at the following link:
NI-IMAQ for USB Cameras 1.0
You are correct that you need LabVIEW 8.0 and Vision 8.0 installed. After this you should be able to install this very simply. If that's still giving you trouble, try repairing LabVIEW and repairing Vision (Start » Control Panel » Add or Remove Programs » National Instruments Software » LabVIEW or Vision » Repair).
Please let us know if you have any more trouble on this. Please post a screenshot of the error as well.
Regards,
Luke H

WebDev Install with JDeveloper and WLS

Similar Messages

Maybe you are looking for