Webdynpro abap application name space.
hi guru,
i have created webdynpro abap iview for an application .
while running the application in se80 application->run .
its working fine .
where as in portal iview its not working ( i.e iview
trying to load ).if i change the name
of that application its working fine .
Is there any name space standard to create a application for
iview.
Regard's
Vivekananthan.s
Hi Vivek,
When you run the webdynpro application in application you can find the url generated as
http://ssecvpiv.corp.satyam.ad:8000/sap/bc/webdynpro/sap/zse_mis_reports say something like this then in portal we have an options to enter as sapnamespace component name
""""sap/zse_land_admin?sap-system-login-basic_auth=X&sap-client=040&sap-language=EN
here zse_land_admin is my componenet name and client number should be yuor client number just copy paste this u can run the application of the webdynpro abap into the portal.
Before this please make sure that you have done seetings in system administration (which register s your login details of yuor server ).
Hope it helps you .:)
Regards,
Sana.
Similar Messages
-
Open Webdynpro ABAP application from UWL
Hello Experts,
The requirement is we need to open the Custom Webdynpro ABAP application when the user clicks on the UWL tasks instead of ITS based screen.
We have created a custom workflow task. Then we maintained the task entry with Webdynpro ABAP application name in SWFVISU transaction.
After re-registering the UWL connector in Portal I could not find the Task ID in UWL definition. In UWL the task item is visible but could not open the task because the UWL could not identify the task no for this.
Am I missing something in the above steps?
Kindly help.
Kind Regards,
Nirmal Sivakumar GAny thoughts on this issue guys?
-
Error in webdynpro(ABAP) application development
Hi,
I am very new in webdynpro (ABAP) application development. I want to create some application based on webdynpro ABAP for few Z- Report. What is the prerequisite to develop a application based on webdynpro( ABAP ) .Because when I am trying to create application in se80 and giving the related functional model name in wedynpro component field , I am getting the error like Web Dynpro Comp./Intf. ZOS_xxx_FM does not exist. How to proceed further?
Thanks,
KundanHi,
Can you be more clear...
Please refer this link for Personalization-
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/719f42f2ff7e5fe10000000a155106/content.htm
Regards,
Lekha. -
Issue on Creating RFx in webdynpro ABAP application - SRM Business Package
Hi
We are in to SRM 7.0 with the same version of Business Package in SAP Portal also.
I am trying to create a RFx from Portal which in turn calls the webdynpro ABAP application (Strategic Purchasing->Strategic Sourcing->Create Documents->RFx)
sap/bc/webdynpro/sapsrm/wda_l_fpm_oif.
This Application has some button called "Tech RFx", "Permissions" etc., When I click on those buttons it throws the error as below :
"There is no iView available for system "SAP_SRM": object "TechResp". For more information, contact your administrator."
Please let me know where we are missing. I have checked all the Portal permissions. Even I can able to access all other iviews except this two buttons.
Any settings or parameters required on webdynpro ABAP side.
Regards,
Raja.JDear Raja,
this behavior occurs if the IView com.sap.pct.srm.gp.iv_tech_resp
is not assigned to the role which is assigned to the user.
Please assign this IView to the desired user.
Here are the steps to follow in your systems:
STEP 1: Login to the Portal with Content Admin Authorization.
STEP 2: Navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> Core -> Roles -> Open the desired role and
choose Navigation Folder.
STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> PPS -> iViews -> Tendering -> Select Tech
Responses (Technical name is iView com.sap.pct.srm.gp.iv_tech_resp) and
right click and choose 'Add iView to Role' -> Delta Link and save.
STEP 4: Log off and login with the user and check the issue.
Best regards,
Tamas -
Modification in standard webdynpro abap application
Hi
In my portal for some of my ESS applications are used in webdynpro abap for example travel expense and travel request now i have a requirement like i have to make the create travel expense button disable based on the condition llike i only he has to click create travel expense after creating travel request .So can anybody let us know how to do modofications in the standard webdynpro abap application.
Thanks in advance.Hi
For making changes in the standard web dynpro compoenent, you need to create and implement enhancement.
For this you can find many links in SDN on how to create enhancement.
Now coming to your specific requirement.
Here what you can do is open the standard component.
1. press ctrl +F4, It will open a popup there give some name to your enhancement.and desicrption . then press Enter.
Assign it to teh package you want.
2. Go to the view where you want to disable the button, There go to the layout and find the ID of the button. say it is 'BTN'.
3. Now go to methods tab, scroll right and selct post exit method of wddomodifyview emthod.
4. there write the code with the condition you want.
if flag eq 'yes'.
data lv_btn type ref to cl_wd_button.
lv_btn ?= view->get_element( 'BTN' ).
lv_btn->set_enabled( abap_false ).
endif.
5. one last thing is you can create a attribute named flag of type string and set its value to 'yes' when you want the button to enable.
Thanks
Sarbjeet Singh -
How to exit from a WebDynpro ABAP application and open another url
Hi Friends,
How to exit from a WebDynpro ABAP application and open another url like (www.yahoo.com) in the same window of the WD4 application on click of a Button?
Regards,
XavierHi,
First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
Then create method handler in the view with this code
data lo_view_cntr type ref to if_wd_view_controller.
data lo_win_cntr type ref to if_wd_window_controller.
data: l_parameter_list type wdr_event_parameter_list,
l_parameter type wdr_event_parameter,
l_val type ref to data,
l_val_url type REF TO data.
field-symbols: <fs> type any,
<fs_url> type any.
lo_view_cntr = wd_this->wd_get_api( ).
lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
CREATE DATA l_val type c.
CREATE DATA l_val_url type string.
ASSIGN l_val->* to <fs>.
ASSIGN l_val_url->* to <fs_url>.
<fs> = 'X'.
<fs_url> = 'http://your-link.com'.
l_parameter-name = 'URL'.
l_parameter-value = l_val_url.
INSERT l_parameter INTO TABLE l_parameter_list.
lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
parameters = l_parameter_list ).
You can easily change this logic to exit application instead of redirecting to the site
just changing to
l_parameter-name = 'CLOSE_WINDOW'. -
Webdynpro abap application for HCM
Dear all,
In enterprise portal->Content Administration->PortalContent->Content provided by SAP->line_manager->Manager Self-Service->iviews->HCM-> there is a PCR application by name "personnel change request". this is a webdynpro java application.
I have installed latest business package of ESS/MSS. so there should be both dynpro java and dynpro abap application. kindly tell me that for the personnel change request PCR application in which package can i find the wendynpro abap application.
Regards,
BharathDear Bharath,
I am no expert on the topic but i can definitely answer your last question.
Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
Regards,
Sowmya
Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM -
Apply custom themes to WebDynpro ABAP application in Portal
Hi,
We have just upgraded the E-Recruitment to EHP4. We have two instances of ECC in which one acts as HR instance and the other one for E-Recruitmet. We have created custom themes for portal and need to apply the same for the WebDynpro ABAP applications for E-REcruitment. I have downloaded the theme and from portal and uploaded the same in MIME folder using SE80 transaction. I have also added the parameter sap-cssurl=/sap/public/themes/<my custom theme folder name>.
Also tried giving the url in application parameter as
SAP-EP-THEMEROOT=http://<hostname>/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/<custom theme>
Is there any other way to apply themes for WD ABAP applications. I dont want to customize the standard applications and just want to apply the themes.
Any suggession on this is highly appreciated.
Kind Regards,
Vivek.Hi,
to create theme for webdynpro abap application, use Eclipse Plugin. Please remeber to check the version of theme file before using theme.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d5ef40-465e-2c10-9ca9-f548bfc3f236
setup custom theme for webdynpro abap application.
FEATURED EVENTS
Regards
Baby -
Putting Webdynpro ABAP application on portal
Hi all,
We have SAP ECC 6.0 as the ABAP system and EP 7.0 SP 6 is the portal. I want to show a Webdynpro ABAP application on the portal which I have created in the ECC system.
I have an created an application in the back end with the following parameters :-
Webdynpro Component name :- ZTESTWEBDYNPRO
Webdynpro Application name :- ztestwebdynpro
I then created a Webdynpro ABAP iview with following parameters :-
Application name :- ztestwebdynpro
Namespace :- sap
System :- SAP_ECC_SERP (this has been tested and is working).
We also have SSO configured with logon ticket to the ECC system.
But I am getting a "Page cannot be displayed" error when I execute the application.
Any idea why this can occur?
Thanks,
Hari
Message was edited by:
Hari
Message was edited by:
HariHi Hari,
So assuming you have tested the connection to the system,
perhaps another service, BSP, ITS , whatever
and that it is creating WEB DYNP ABAP iviews that is the drama.
Under EP 7.0, be sure to choose Iview type WEB Dynp ABAP.
the properties page with application parameters is:
SYSTEM -> As created to access system, available in dropdown
Namespace - > sap
Application name -> <your WDA> case as created in SE80
So it looks like you have entered correctly to me.
Perhaps the portal Forum has more info if you have continued issues.
regards
Phil. -
F4 help issue with Webdynpro ABAP application
Hi,
I am facing a strange issue with the F4 help in my webdynpro abap application.
I have few fields for Purchase Order and Line item on the screen and they have corresponding F4 helps associated with them.
When i select for F4 help, sometimes the screen simply blanks out and a white screen is displayed. When i refresh the screen and try the same scenario again, i can see the value list correctly.
This issue occurs very randomly with no specific pattern. If anyone else has faced this issue earlier, kindly let me know how to get rid of this issue.
Any pointers to resolve this issue will be helpful.
Note: I am using SAP version 702 SP09.
Thanks,
RamanathHi,
we cannot help you from offline, you need to check the standard procedures like
SICF->is your application node is active.
FQDN->check fully qualified name is configured
You can also try to execute standard SAP application, if sap application also has problem running then you may have to get the help of BASiS people to look into that and raise a support ticket.
If sap applications are running and your custom developed applications are not running then look into this application if there is any URL parameters need to supply etc. -
Error in opening webdynpro abap application
hi All,
I am facing below issue in opening webdynpro abap application, this is first WDA application in production system, please help me in resolving this issue.
============================================================================
Error when processing your request
What has happened?
The URL http://grp.mysap.pg.com:9500/sap/bc/webdynpro/sap/zgpuvstapp/~ucfLOADING was not called due to an error.
Note
The following error text was processed in the system GRP : A request for server adln5412 has been sent to server adln5411; see Note 1364846
The error occurred on the application server adln5411_GRP_10 and in the work process 3 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system GRP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server adln5411_GRP_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server adln5411_GRP_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: BS6402 -l: E -s: GRP -i: adln5411_GRP_10 -w: 3 -d: 20100929 -t: 140306 -v: ERROR_MESSAGE_STATE -e: A request for server adln5412 has been sent to server adln5411; see Note 1364846
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================================
Edited by: brahmanandam ausali on Sep 30, 2010 4:11 AMHi Shibli,
I'm facing the same issue with the POWL only if called from a part of the network outside our country (Italy) so I think it would be a network configuration problem as you suppose. Can you explain us the configuration of the balancer and dispatcher to solve the issue?
Thanks
Mattia -
Calling Portal iView from a WebdynPro ABAP application
Hi ,
I have a requirement where I need to call an iView in my portal from the Webdynpro application also existing in the portal.
Can anyone provide me the method with source code( if possible ) to call an iView existing in the portal from the WebDynPro ABAP application.
Best Regards
SidHi Siddharth,
Well, I think you can go for Portal Navigation concept.
Please check the required source code in WDR_TEST_PORTAL_NAV Web Dynpro component. That will illustrate both Page based Navigation and Object based Navigation.
Hope that should solve your problem.
Regards
<i><b>Raja Sekhar</b></i> -
How to Call the RFC in Webdynpro abap application
Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit -
Call WebDynpro Abap application with trasaction
Hello Experts,
can I call my WebDynpro Abap application with a trasaction ?
Regards
sashi,
Go through this link
[****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
Hope it will help you.
Regards,
Rohit -
Getting prob while creating view in webdynpro ABAP application
Hi Guys,
I am facing a problem while creating a view for webdynpro ABAP application. It is giving an error as "ICF service "/sap/public/bc/WebDynpro/ViewDesigner" inactive".
can anybody let me know how to solve this problem.
Thanks In Advance
Regards
RavikumarI think check Internet explorer Tools ->Internet Options ->Connections.>Lan Connections> if the proxy or anyting checkbox is clicked coz it doesn't work with Internet on .
Please reward if useful.
Maybe you are looking for
-
Unable to access information when using Firefox 27.0.1 in Windows 7 environment; getting requirement to run ebayISAPI.dll file and doesn't allow any further access to ebay information.
-
Whenever I try to initially view HD trailers the video is totally washed out unless I manually adjust a/v controls also when I watch some video podcasts I have to continually mouse over the frame to un-wash the picture.
-
The Apple Id on my phone is not correct. How do I change it?
When I go to download an app, the Apple ID on my phone is not correct. How do I change it?
-
Approval of Terms & Conditions
Terms and Conditions are often integral processes in forms submissions. Does FormsCentral have an elegant way of acheiving this in a way that meets strict legal standards. I can think of a few different ways of achieving this result, but would rath
-
Query: Count a char with respect to another char
Hi, In the query I would like to count the "unique occurances" of a characteristic with respect to another "characteristic". The value should be fixed ipprespective the drill down state of any other char. Any ideas? Example: I have Material and Custo