WebDynpro Abap interaction with R/3

we're planning to develop a webDynpro abap application, that should run in the internet/intranet, but we also want to integrate some sap-transactions (e.g. show sales documents) .
What will be the best approach to realize such things, as we don't want to develop two frontends, one for sapgui (with standard transaction interaction) and one for the web.
kind regards,oliver

Hi Oliver,
did you have a look at function module WDY_EXECUTE_IN_PLACE? This might help: http://help.sap.com/saphelp_nw04s/helpdata/en/43/2f1a63cb883575e10000000a11466f/frameset.htm
As to the different search help possibilities, have a look at http://help.sap.com/saphelp_nw04s/helpdata/en/9b/c51c42735b5133e10000000a155106/frameset.htm with information on using the existing ABAP Dictionary search help functionality: http://help.sap.com/saphelp_nw04s/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/frameset.htm
Regards,
Heidi

Similar Messages

Webdynpro abap integration with interactive adobe forms

Hi Experts,
Am Facing problem printpreview adobe in portal and it developed by webdynpro abap interactive form there am getting warning message
Warning : This form is not supported with current verision of Acrobat or Adobe reader
Upgrade to Latest Verision For full Support.
And it is display half letters in print preview.
Regards,
Sakthi.

Dear Thomas,
Here there are two server one is developpment and quality.In development it is working fine and quality it is creating problem.If open in any system we are facing same problem.My dout is any server specific
adobe verision is in portal.
Thanks for Replying Good luck.
Regards,
Sakthivel.S

Call WebDynpro Abap application with trasaction

Hello Experts,
can I call my WebDynpro Abap application with a trasaction ?
Regards
sas

hi,
Go through this link
[****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
Hope it will help you.
Regards,
Rohit

Webdynpro abap Faqs with anws!

Hi experts!!
Can any one please Provide some webdynpro abap faqs with answers.
what are the good books/sites to Read/Refer.
Thanks;
-Upen.

Check out this links related to abap web dynpro
WDA in SAP Help
[http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm]
Web Dynpro for ABAP in SDN
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9 [original link is broken]
Developing ABAP Applications Using Web Dynpro
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/d41b25d2216babe10000000a1553f6/frameset.htm
Web Dynpro ABAP: Development in Detail
http://help.sap.com/saphelp_nw2004s/helpdata/en/03/0048413e466e24e10000000a155106/frameset.htm
WDA Sample programs & tutorials
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
Web Dynpro ABAP Demonstration Videos
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
Web Dynpro ABAP Wiki's
https://www.sdn.sap.com/irj/scn/wiki?path=/display/wdabap/main&
New to Webdynpro
Regards,
Manne

Integrating WebDynpro ABAP applications with UWL for workflow in Portal

Dear
We want to integrate an abap webdynpro application as task in the workflow with UWL.
More information was found in /people/ginger.gatling/blog/2005/12/14/create-new-uis-for-existing-workflow-tasks-with-abap-web-dynpro-and-universal-worklist
But no answer on the following issue:
We use the transaction SWFVISU to prepare standard setting for our task. This defines how a task is executed, once you select the task subject line on the worklist.
Task                           TS91700001
Visualization Type             ABAP Web Dynpro
APPLICATION     z_wd_pas
DYNPARAM     IV_WIID=${item.externalId}&period=${item.PERIOD}
NAMESPACE     SAP
SYSTEM_ALIAS     SAP_BSP_EREC
But we want to start the abap webdynpro application with a dynamic parameter: period 07.2010 or 08.2010 or MM.YYYY. This parameter is a container element of the task, filled when the task is created. Also other parameters are available in the abap webdynpro application.
Component       Z_WD_PAS
Interface View PAS
Plug Name       DEFAULT
Help Menu Text
Help Link
                                                                                Package         Z_PAS
Language        EN
URL             http://saperpd1.imec.be:8000/sap/bc/webdynpro/sap/z_wd_pas
with parameters
IV_WIID     000000000000     SWW_WIID
ORG_UNIT     00000000     ORGEH
PERIOD                              SPMON
PERNR     00000000     PERSNO
Can we set the dynamic parameter list DYNPARAM from the task
or should we read the container in our abap webdynpro application described in http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal?
More information: The task is a webservice
Standard task        91700001   Z_PAS_CC
Object Category      BOR Object Type
Object Type          WEBSERVICE   WebFlow Service
Method               PROCESSDIALOG                      Dialog Service
with the following standard program code for this method:
begin_method processdialog changing container.
DATA: l_wi_objkey TYPE swotobjid-objkey.
DATA: l_wiid TYPE swwwihead-wi_id.
                                                                                CALL FUNCTION 'SWE_WI_GET_FROM_REQUESTER'
IMPORTING
    requester_workitemid = l_wi_objkey.
l_wiid = l_wi_objkey.
                                                                                CALL FUNCTION 'SWF_WSC_START_LH_DIALOG'
EXPORTING
    i_wiid                 = l_wiid
EXCEPTIONS
    url_creation_failed    = 1
    browser_launch_failure = 2
    OTHERS                 = 3.
IF sy-subrc <> 0.
CASE sy-subrc.
    WHEN 1.
      exit_return '1000' space space space space.
    WHEN 2.
      exit_return '1001' space space space space.
    WHEN OTHERS.
      exit_return '1002' space space space space.
ENDCASE.
ENDIF.
end_method.
Before calling the function SWF_WSC_START_LH_DIALOG the parameters for the abap webdynpro should be defined. Is this possible ?
Thanks for your suggestions.
Best regards
Luc Marent

I added below sources .
>    <ItemType name="uwl.request.webflow.WS91000001" connector="WebFlowConnector" defaultView="WorkItemRequestsView" defaultAction="launchWebDynPro" executionMode="default">
>      <ItemTypeCriteria systemId="UWLSETXXX" externalType="WS91000001" connector="WebFlowConnector" />
>      <Actions>
>        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
>          <Properties>
>            <Property name="WebDynproApplication" value="ZWD_WF_002" />
>            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no" />
>            <Property name="DynamicParameter" value="wi_id=${item.externalId}" />
>            <Property name="openInNewWindow" value="yes" />
>            <Property name="System" value="WDSETXXX" />
>            <Property name="WebDynproNamespace" value="sap" />
>            <Property name="display_order_priority" value="5" />
>          </Properties>
>          <Descriptions default="" />
>        </Action>
>      </Actions>
>    </ItemType>
>    <ItemType name="uwl.request.webflow.decision.WS91000001.UWLSETXXX" connector="WebFlowConnector" defaultView="WorkItemRequestsView " defaultAction="viewDetail" executionMode="default">
>      <ItemTypeCriteria systemId="UWLSETXXX" externalType="WS91000001" connector="WebFlowConnector" />
>    </ItemType>

WebDynpro ABAP : Table with DropDownByKey does not have neat focus

Hi Experts,
I have a table, with one column of type dropdownbyKey, i need this so that i can display the DESCRIPTION rather than key. Issue is when i select a ROW in this table i see a special YELLOW BG COLOR on all columns except the column that has drop down by key it is first thing enduser points out as issue ???
Any help would attract points

>
ramkumarvalluru wrote:
> Hi Eureka,
>
> I am new to webdynpro abap area.Please provide me step by step procedure for working on Dropdown by key,Check boxes Radio buttons aand all UI elements.
>
> Please provide me.
First of all, please don't attach new questions to existing threads. Second asking for step by step procedures on all UI elements is really outside the scope of a forum posting and asking for too much. If you are that new to Web Dynpro ABAP, then start by reading the online documentation, the WDA WIKI section, and the WDA eLearnings.

Webdynpro ABAP integration with Flex

Dear All ,
We are trying to integrate the Flex with ABAP WebDynpro. On the front end there are a set of check-boxes and whenever the user selects one or more check box , we need to make a note of this selection and save this to the database. Data in FlexBuilder is getting stored as ArrayCollection with two columns label and selected.
We need to integrate the same into SAP using WebDynpro ABAP. We have created a datasource to read the values. Even after giving the identical names in webDynpro the data is not getting populated.
If any of you has worked on a similar requirement earlier, please revert back .
Regards,
Amit Saini

Hi Banarji
Ple try this.
In Flex Part
        [Bindable]
        [Embed(source=".jpg")]
       <mx:Image x="" y=" " width=" " id="loader1" autoLoad="true" source=".JPG" height=" "/>
Webdynpro Part
      Goto MIME - > add .swf file
I hope.It will work fine.
Regards
Laxmikanth Karunamoorthy

Iview for Webdynpro ABAP application with TimedTrigger

Hello,
I created an IView for a WebDynpro ABAP application. This application uses a UI element TimedTrigger. Without portal integration this TimedTrigger works fine. Inside an IView this TimedTrigger element does not work anymore. Did anyone have a similar problem? Does anyone have a solution for this?
Thanks and regards
Marc

hi,
Go through this link
[****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
Hope it will help you.
Regards,
Rohit

ISR with WebDynpro ABAP

Hi Experts,
We are building a custom HR application to automate various HR processes
like New Hire, Termination, etc.. Due to certain internal issues we are
unable to use the standard business package for MSS (and hence PCR screens
with adobe forms). We have to create custom webdynpro abap screens for the
whole application. Now i would like to check if there is a possibility to
use the ISR framework with a custom webdynpro abap application.
I checked the transaction QISRSCENARIO but i could not find any option for
webydnpro abap in "Entry type for Web".
Have anyone of you tried such a scenario earlier with ISR's? Is there no way
that we can use webdynpro ABAP applications with ISRs? Or do we have any
work around for this.
Please send in your valuable comments.
Thanks in advance!!
Regards,
Gayathri

Hi
First, The ISR Scenarios are not for iviews. They are just a part of a view. We can use webdynpro ABAP with the ISR Scenarios. We need to embed these forms into our webdynpro ABAP views and code accorsdigly to get the data. There are some standard components that are provided by SAP to handle ISR Forms with Webdynpro. Check these.
Regards,
Srikanth.

WDA with GP - Web dyn pro Abap intergration with Guided procedure

Hi All,
I tried integrating a WDA - Webdynpro ABAP application in Guided procedure. Though I was able to create a CO - Callable object out of the WDA , I am not able to access the WDA input and output parameters, I just want to know, where am I going wrong?
Does anybody have any leads? Thanks in advance.

hii prab
if u want integrate Webdynpro ABAP applications ....
by using Webdynpro IVIEW Template....we can do it..
u should create Technical system under SLD and configure SSO
& u should create sytem object and system alias..
this is the procedure for integrate the Webdynpro ABAP applications
with regards,
venu

Differentiate between button events in WD ABAP Interactive form ?

Hi ,
I have a senario in which I have 2 buttons in a Webdynpro ABAP Interactive form.
Button1 is to fectch some values from the back and set in the context so that it is populated in the form.
Button2 is submit button which calls a BAPI in the backed..
I need to differentiate between the events of these 2 buttons in my Webdynpro ABAP onSubmit event..
Is there any way to differentitate which button I have clicked in the form.. ????
Thanks
Siva

Hi Sivaraj,
you can try defining an action on OnCheck action. I think it should work.
If it doesnt work then, define an attribute in the context, and place it on the form, make this field invisible. Then on click on button set some values in this attribute. Read the attribute value in the ABAP. And perform the action according to that.
Hope this helps,
Amit

WebDynpro Abap table not rendered correctly inside portal iView

Hi,
I have a webDynpro Abap application with a table that contains radio buttons as table cell editors.
When I run the application directly it looks fine, but when I run it inside a portal iView the radio button allignment changes to the top of the table cell.
Please help.
Kind Regards,
Dirk Naude

I found that this could be fixed by changing the portal theme using the theme editor, specifically changing the table cell padding property.

Putting Webdynpro ABAP application on portal

Hi all,
We have SAP ECC 6.0 as the ABAP system and EP 7.0 SP 6 is the portal. I want to show a Webdynpro ABAP application on the portal which I have created in the ECC system.
I have an created an application in the back end with the following parameters :-
Webdynpro Component name :- ZTESTWEBDYNPRO
Webdynpro Application name :- ztestwebdynpro
I then created a Webdynpro ABAP iview with following parameters :-
Application name :- ztestwebdynpro
Namespace :- sap
System :- SAP_ECC_SERP (this has been tested and is working).
We also have SSO configured with logon ticket to the ECC system.
But I am getting a "Page cannot be displayed" error when I execute the application.
Any idea why this can occur?
Thanks,
Hari
Message was edited by:
        Hari
Message was edited by:
        Hari

Hi Hari,
So assuming you have tested the connection to the system,
perhaps another service, BSP, ITS , whatever
and that it is creating WEB DYNP ABAP iviews that is the drama.
Under EP 7.0, be sure to choose Iview type WEB Dynp ABAP.
the properties page with application parameters is:
SYSTEM -> As created to access system, available in dropdown
Namespace - > sap
Application name ->     <your WDA>    case as created in SE80
So it looks like you have entered correctly to me.
Perhaps the portal Forum has more info if you have continued issues.
regards
Phil.

ECatt Webdynpro ABAP problems

Hello everbody,
we are trying to script a webdynpro ABAP application with eCatt.
We have completed the system configuration steps (see below), but still when trying to record we are getting the error message:
"An error probably occurred during the logon to the Web Dynpro target system. Check user and password in the target system."
We have set up a HTTP connection to the target system with a preset username / password combination in the authentication details. We also log into the target system with this username / password combination directly just fine.
What could we be missing?
Some more questions:
Is eCatt supposed to execute the webdynpro on the target system as the user defined in the http connection or as the user executing / recording the script?
What user should be set in the http connection in the first place? I'm assuming its not the ecatt_http user because that one doesnt even exist in the target system (the guides only ask for this user to be created in the ecatt system)
Regards & Thanks in advance,
Thomas

Thomas Stoffels wrote:
> We have set up a HTTP connection to the target system with a preset username / password combination in the authentication details. We also log into the target system with this username / password combination directly just fine.
Just check, if HTTPS is off on this connection.
Thomas Stoffels wrote:
> Some more questions:
> Is eCatt supposed to execute the webdynpro on the target system as the user defined in the http connection or as the user executing / recording the script?
> What user should be set in the http connection in the first place? I'm assuming its not the ecatt_http user because that one doesnt even exist in the target system (the guides only ask for this user to be created in the ecatt system)
Please take a deeper look into saphelp for RFC connections, to clearify, which user credentials are used with RFC connections.
Kind regards,
Christoph

Is there MDM Webdynpro ABAP standards components?

Are there standard MDM Webdynpro ABAP standard components available.
We are planning to integrate MDM Webdynpro ABAP component with BPM.

Hi George,
I think there are no MDM Webdynpro ABAP standard components available. But I think it is a good idea to go with MDM Web Dynpro Java Components, as BPM is java based just as the other tools in the Composition Environment and fully compatible with Java. There are many articles and documents available online.
This link maybe helpful for BPM and Web Dynpro for Java Integration
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b06c49b2-ac63-2c10-3d8d-d17b817ba4ca?QuickLink=index&overridelayout=true
Regards
Goutham Kanithi

WebDynpro Abap interaction with R/3

Similar Messages

Maybe you are looking for