Webdynpro application group not visible in Portal
Dear All,
I have a webdynpro for java application in my portal and being used by nearly 70000 employees.
Strange issue: 1 of the employee in the application cannot see the group UI element in the Bottom of the page, though I had not made it invisible or anything. All others could perfectly see all parts of the UI.
After much investigation and failure, I deleted the Userid and made his ID again, to my astonishment, the problem was solved.
Did anyone experience this issue and can explain how and why did this happend???
Ankur
Hi Ankur,
The user might have selected the "Remove from Page" option from the menu of the iview on the right hand side. We had the same problem and realised about this after a while. It mus have been the same issue.
I hope this helps.
Regards,
Gopal.
Similar Messages
-
WebDynPro ABAP iViews not picking the portal look and feel
Hi,
In our case , WebDynPro ABAP iViews not picking the portal look and feel.
Is there any way to provide the custom developed portal theme link or css file to the WebDynPro application.
Can it be done programmatically in the WD ABAP application.
Best Regards
SidLook at the below link, it will answer your question:
Re: EP 7 Portal stylesheet with WD ABAP
Raja T -
One user from AD is not visible in portal user administration
Hi,
one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
Any ideas what could be the cause?
Maybe some settings/attributes for this user on the Active Directory side could be the cause?
Regards,
LadislavHi,
Could you please check and confirm if the user,group path are the same for the
particular user on AD as that referred to by the portal. If not he would not be on the portal and
then there would not be kerberos too in place for him.
Rgds -
Planning application is not visible in calculation manager
Hi,
I'm novice to EPMA.
I have successfully created and deployed an EPMA application,but when i'm unable to see the application(s) under planning node.
As per my knowledge EPMA application by default deployes in calculation manager,if so why the application is not visible.
any suggestions on this r helpful to me
thanksThe issue is resolved now.
The calculation manager service was set to automatic, set it back to manual and restarted calculation manager service.
It showed the application in calc manager.
Regards.
Ace -
New fields created in MDM Console not visible on Portal iViews
Hi All
I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fields and added/deleted records.
However I can not add any new fields (from MDM Console main table) we have created. That is whired because I only can see all fields beeing in repository for long time now, but all new fields (from that same table) ar not visible on portal.
I tried few options with creating new and different iViews. No help. All the time I can vise old fields from repository but new one are not available.
Can you plase advice what is/ may be wrong?
Thank you in advance.
BR
RafalHi All
After restarting server problem solved. That mean there is a casching problem. After investigation here is service to restart:
J2EE engine
Thank you for help.
BR
Rafal
Edited by: Rafal Paczynski on Sep 29, 2011 12:21 PM -
Application WebDynpro ABAP is not visible in Google Chrome
Hi Experts,
After the Upgrade 7.3 EHP1 in Production System it is not visible the application developed in web dynpro ABAP, in the Employee Self-Service Portal.
In the QA and Development, applications WD ABAP are visible.
What can happen in the Production system?.
Thanks in advance.
Regards,
Briger>
Please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user995809".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
>
Hi, I've an item with label-
<font color="rgb(51,102,153)"><b>Heading: </b></font>
Font color is coming in IE but not in google chrome(19.0.1084.52 m). what should I do?
>
To start with, always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
Secondly the <tt>font</tt> element was deprecated 14 years ago and is now obsolete. Do not use it. Stop using any reference material that suggests using it.
<tt>rgb(51,102,153)</tt> is a CSS colour value, which the HTML specification does not require user agents to support for legacy <tt>colour</tt> attributes.
Use standards-based HTML and CSS:
<span style="color: rgb(51,102,153); font-weight: bold;">Heading:</span> -
LDAP user groups not visible for configuring a Group Portal
Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2 in which
I've added the Novell LDAP Authentication provider as the authentication provider
and then set "myRealm" as the default realm for the domain. I am able to start
the WLS server instance and login to portalAppTools with the "administrator" account.
We would like to configure a Group Portal. In Portal Administration interfaces,
when I click on Group Administartion, I am unable to see any of my external LDAP
groups. I know that we cannot create/delete users or groups in the external LDAP
repository thru the Admin UI but the documentation says that I should be able
to view the users/groups in the Admin UI. Authentication against the external
LDAP repository works fine. Can anybody suggest the reason why we are unable to
view any of the Users or Groups in our external LDAP repository thru the User
Administration interfactes.
Appreciate any feedback.
Thanks
VikramHi Jim,
I've configured a default LDAP V2 Compatibility Realm by modifying the Config.xml
file. I was able to restart Weblogic and see the LDAP Groups and Users thru the
WLS console. In our project we've a unique requirement wherein all Application
Groups and User Accounts would be stored in an LDAP repository and all BEA SERVICE
level accounts and groups are stored in a Database (groups like AdminEligible,
Administrators etc.). We need to be able to look at the groups in both the Database
and LDAP repositories in order to administer and configure a Group Portal. On
the outset it looks like we will not be able to do what we want to with the current
portal framework. Please suggest if there are any alternatives in order to implement
this solution. I am sure there are lot of other Clients who cannot create groups
like Administrators, AdminEligible etc in their LDAP repositories and will be
forced to think of alternatives.
I would appreciate if you can reply back at your earliest convenience.
Thanks
Vikram
Jim Litton <replyto@newsgroup> wrote:
The Weblogic 7.0 Authentication Providers (new JAAS Framework) is not
supported with Portal 7.0. You will need to configure the Compatibility
Security CustomRealm for Novell to try to get Portal working.
see defaultLDAPRealmForNovellDirectoryServices at
http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1083149
In addition, remember to test functionality through the Weblogic
Console. If you can see groups and users there okay it is very likely
that Portal will operate.
-- Jim
Vikram wrote:
Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2in which
I've added the Novell LDAP Authentication provider as the authenticationprovider
and then set "myRealm" as the default realm for the domain. I am ableto start
the WLS server instance and login to portalAppTools with the "administrator"account.
We would like to configure a Group Portal. In Portal Administrationinterfaces,
when I click on Group Administartion, I am unable to see any of myexternal LDAP
groups. I know that we cannot create/delete users or groups in theexternal LDAP
repository thru the Admin UI but the documentation says that I shouldbe able
to view the users/groups in the Admin UI. Authentication against theexternal
LDAP repository works fine. Can anybody suggest the reason why we areunable to
view any of the Users or Groups in our external LDAP repository thruthe User
Administration interfactes.
Appreciate any feedback.
Thanks
Vikram -
Calender and input help Icons is not visible in portal
Dear Experts,
There is a webdynpro application in CRM back end system. When the application is launched in CRM UI, It display the screen elements clearly. But when the application is called from portal environment, the calender icon and input help icon (icon in the ui element) is not visible.but it is working properly if clicked on the correct place.
In Development and Quality environment its working properly.I have searched OSS notes, but found none.
Your help is highly appreciated. Awaiting for the replieshi Raman,
Even i m having the same problem. Its working in dev and Quality environment but not in production.
Can u please share thhe OSS notes found.
Thanks -
Web Dynpro Application is not openeing from Portal UWL
Hi,
I have developed a WD application which is integrated in the portal. This WD application navigates through several levels of approval by triggering the workflow. Initially USER will create the request launching the WD application from portal and upon clicking the SUBMIT button -> Workflow will be triggered and Work item will be sent to Approver UWL list in the Portal.
Link will be displayed in the UWL list and upon clicking that link WD application need to be opened where the details will be displayed and can approve the request by clicking on APPROVE button.
Here, We have created a PFCG role which can be assigned to USER to access the WD application to create the request from portal. But for Approvers, we have not assigned any such roles except UWL role.
Workflow is working fine, Workitem is displayed in Approvers UWL but when they click on the link -> WD Application is not opening. Configuration in SWFVISU is done.
I think we are missing some roles which need to be assigned to Approvers. We cross checked by assigning SAP_ALL profile to the Approers and found WD application is getting opened and everything is working fine. But we are not supposed to give SAP_ALL in the PRD.
Please help what are the other roles that need to be assigned to Approvers.
Thanks,
Bharath.did you try by assigning pfcg roles to approvers along with Uwl?
Regards
Srinivas -
Application Components not visible in SAP R/3 tree
Dear All,
We have standalone system and we have installed ECC 6.0 with BI Content. Harddisk is 320 GB with 2 GB RAM. We want to extract the data from R/3 to BW which are on the same system (As ECC 6.0 contains builtin BW).
In RSA1 the application components are not visible in the SAP R/3 tree under datasource tab. When I am replicating the entire SAP data source it is giving shortdump(STORAGE_PARAMETERS_WRONG_SET).
How can I replicate a particular data source to avoid the memory problems because I have only 2 GB RAM.You can also Replicate a single datasource w/o replicating the App Comp using a FM.
BW
SE37
RSAOS_METADATA_UPLOAD
Execute
Give Source System n Datasource - Execute
*Give Datasource Name - for I_O... & Source System for Logsys. -
Default Web Application is not visible in Weblogic Console
We are using Weblogic 5.1.0 SP7
We moved our Application from the Implicitly Defined Default Web
Application which is configurated by the
weblogic properties to a Web Application. Because we don't want to
change any URL in our Application, we
decided to deploy it as Explicitly Defined Default Web Application.
By this we recordniced that the weblogic.httpd.defaultWebApp property
worked not that way descibed in the
Weblogic Documentation. You have to write the path to the WebApp not the
name!
So we have the following Entry in the weblogic.properties:
weblogic.httpd.defaultWebApp=i:/if_home2/web
This works fine. The Server starts and serves the WebApp the way we
expected. But wenn we start the Weblogic
Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
applications" folder. This one is empty
now! Previously the "General" Entry for the Implicitly Defined Default
Web Application was shown here, which
showed our Servlets and JSP's and their hit count and parameters.
So there is no chance to monitor the Servlets and JSP's of the default
Web Application.
I tried to deploy our WebApp a secound time with
weblogic.httpd.webApp.OurApp=i:/if_home2/web
but this create a second independent WebApp. OurApp is shown in the
Weblogic Console but it does not monitor
the hits to the default WebApp. So this is not a solution!
Any idea to make the default Web Application visible in the Weblogic
Console?
in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
please tell me what could be another workaround.
-
ESS- ABAP Webdynpro- table column not visible
Hi,
We are using SAP travel management for expense approvals. In the package PTRM_WEB_UI, you will find the component FITE_VC_RECEIPTS. In the VIEW - RECEIPTS_VIEW you will find in the table that there is a column called "Short Info". However this column in not visible in the portal.
There is no personalization done to hide this column.
The visible property of this column is set to "visible".
In portal content directory if i right click....this column is not even available to be added/removed.
Please help me understand why this column in not visible and how can i make it appear in portal.
Thank You!Any input?
-
Webdynpro Application is not Deploying into Netweaver 2004s From NWDS CE
Hi,
I Developed Webdynpro Application in NWDS CE 7.1 SP5.
I Am using Netweaver 2004s AS JAVA .
After Deploying application i will get page can not be displayed and in the browser url is following below
http://localhost:-1/webdynpro/dispatcher/demo.sap.com/firstapp/FirstApp?SAPtestId=2
my actual port is 50000 but it gives -1.
and also i need one clarification NWDS CE 7.1 Applications Supports the Netweaver 2004s or
it requires Netweaver CE 7.1 AS JAVA.
We have to develop applications using webdynpro,mobile perspectives in NWDS CE 7.1 SP5
Is it Supports Netweaver 2004s.
Thanks
SubbaraoHi
NetWeaver CE 7.1 uses Java 5 and so does the NWDS CE 7.1 by default. The server you have is NW 2004s SP 9 which runs on Java 1.4. So you simply can not build with Java 5 and deploy it to a server with JRE 1.4, you will get a class unsupported version error.
Next you are using NWDS CE 7.1 to connect to server 2004s. The architecture of the Java servers in SAP is changed. 2004s has SDM and dispatcher and a server process at its simplest form. In CE theres an ICM and server. (SDM & Dispatcher combined). You no more give the message port number when you set up the JEE server of NWDS 7.1 instead you would use instance number. When you register a NW 2004s server with NWDS 7.1 (instance numbers are available for 7.0 servers as well), the studio fails to find the deploy mechanism (SDM or ICM) hence you see a port -1.
Lastly the architecture of WebDynpro is greatly changed from NW 7.0 to NW 7.1 so dont even think of deployment to previous versions.
Regards
LNV -
Default Web Application ist not visible in WebLogic Console
We are using Weblogic 5.1.0 SP7
We moved our Application from the Implicitly Defined Default Web
Application which is configurated by the weblogic properties to a Web
Application. Because we don't want to change any URL in our Application,
we decided to deploy it as Explicitly Defined Default Web Application.
By this we recordniced that the weblogic.httpd.defaultWebApp property
worked not that way descibed in the Weblogic Documentation. You have to
write the path to the WebApp not the name!
So we have the following Entry in the weblogic.properties:
weblogic.httpd.defaultWebApp=i:/if_home2/web
This works fine. The Server starts and serves the WebApp the way we
expected. But wenn we start the Weblogic Console the WebApp ist not
visible in the "myserver/HTTP/Servlet web applications" folder. This one
is empty now! Previously the "General" Entry for the Implicitly Defined
Default Web Application was shown here, which showed our Servlets and
JSP's and their hit count and parameters.
So there is no chance to monitor the Servlets and JSP's of the default
Web Application.
I tried to deploy our WebApp a secound time with
weblogic.httpd.webApp.OurApp=i:/if_home2/web
but this create a second independent WebApp. OurApp is shown in the
Weblogic Console but it does not monitor the hits to the default WebApp.
So this is not a solution!
Any idea to make the default Web Application visible in the Weblogic
Console?
Hello Nadar,
Tell me how are you starting server in the cluster, through nodemanager or commnadline.
Kuldeep -
Enhancement Not Visible in Portal
Hi,
I have enhanced a Standard view for Travel request form to create a new button and added some logic "OnAction". The added button is not visible in the portal. Please suggest me what could be the issue ??Hi Harsha,
I have created a new component Configuration.
I have added some screen shots for your reference.
Maybe you are looking for
-
Display of image in rtf template
Hi, I have a tag in my xml file like <ImageDistributeur>IMAGE:D:\EXPLOIT_UNPMF\Edition\Image\L29004G.tif</ImageDistributeur> and the image is stored in the particular location specified inside the tag. The xml file doesnt contain the image... My ques
-
ABAP Proxy : Modification in Structure 2
Hi, I try to modify a structure but i can not do that, because is "Proxy Structure (generated)", I excute the transaction SPROXY in order to modify this structure but i don't know how to find it Pls help , how to find the structure in this transactio
-
Wierd button behavior: flashing between Up and Over, won't go to frames
I have this strange behavior with buttons. These are button instances, not movie clips used as buttons. I created a list of buttons for a drop down menu. Created the first one then dupliacted the symbol to create the others. The buttons have an Up a
-
Is there a list somewhere of HP Failure IDs and what they mean?
I'm getting the following Failure ID when I run system disgnostic test on the HDD in a HP Envy U0823F-6BA705-XD7X1F-60UE03 Anyone know what it means or where I can find out? The disk itself appears to be running ok. I ran a chkdsk \F on it in a separ
-
KDE 3.4.3 and -fvisibility-inlines-hidden
Hi folks, First of... Arch is great (migrated from Slack ). And yea, it's great that it's optimised for i686 and such However the KDE packages in Arch are a bit... slow I mean I have a decent (but not a high-end) system (Ath-XP 2500, 512 MB DDR400),