Webdynpro Application terminated
Hi All,
When I run my webdynpro application,I am able to see my first view and when I do a Browser 'Refresh',I get a message
"Web Dynpro application terminated. Good bye! ".
Pls do suggest me to solve this problem.
Thanks in advance,
sethu
Hi Govardan,
The error is because of the service configure_application is not active in SICF
go to SICF, and provide service name as CONFIGURE_APPLICATION. right click and click on activate service.
Please find the snap shot as below
Hope this helps you.
Regards,
Rama
Similar Messages
-
Reset and close ur webdynpro application
hi
I have a RESET button in the main window which
need to be reset and moved to starting stage after certain operations have been done when i click on RESET button ,
and other is close button where the whole WEBDYNPRO
APPLICATION has to be closed . how can this be done.
i have used certain method where i called WDCLIENTUSER
and closed the application , but its moving to the next page
and calling the SAP default logoff.htm page .
can any one help me ?hi
thanks for the response
WDClientUser.forceLogoffClientUser(null);
this will move to the next page as show a message
webdynpro application terminated , good bye
instead , can we show out own messages or message
any suggestions ? -
Webdynpro application running error
Hi
i am trying to run my webdynpro application, i got an error in webpage like .....
Error when processing your request
What has happened?
The URL http://secp:8000/sap/bc/webdynpro/sap/wdr_test_application_api was not called due to an error.
Note
The following error text was processed in the system EC6 : Die URL enthält keine vollständige Domainangabe (secp statt secp.).
The error occurred on the application server secp_EC6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system EC6 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server secp_EC6_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server secp_EC6_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: SAPUSER -l: E -s: EC6 -i: secp_EC6_00 -w: 0 -d: 20080812 -t: 161055 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
help me how to solve this ........
Regards
KarunaNo Cross Posting!
Read the "Rules of Engagement"
Regards
Juan -
Hi,
I get the following error when processing a webdynpro application.
Kindly guide on hoe to overcome this error.
Error when processing your request
What has happened?
The URL xxxxxxxxxxxxxxxxx:8002/sap/bc/webdynpro/sap/dswp_ci_issue_management/ was not called due to an error.
Note
The following error text was processed in the system XXX : View usage MAIN_USAGE_1 does not exist in window ISSUE of component DSWP_IM_ISSUE_VIEW
The error occurred on the application server XXXXXXand in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_EMBEDDED_VUSAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_DEFAULT_VIEW_USAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
Regards,
Subhashini.Hi,
I guess you might have deleted some view and didnot delete the same in the WIndow Embed view.
Is this dynamic programming.
Check the MAIN_USAGE_1 doesnt exists in your component.
Regards,
Lekha. -
Runtime Error While executing the WebDynpro Application
I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
No roll storage space of length 9728 available for OCCURS area.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary -
Error while executing webdynpro application : he URL does not contain full
Dear All,
I had installed SAP in my system.But when I am testing webdynpro application I am getting the belwo error. Please let me knwo what setting I need to do to avoid this error.
Error when processing your request
What has happened?
The URL http://hari:8000/sap/bc/webdynpro/sap/z_test_pg was not called due to an error.
Note
The following error text was processed in the system DEV : The URL does not contain full domain specification (hari statt hari.<domain>.<ext>).
The error occurred on the application server HARI_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server HARI_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server HARI_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DEV -i: HARI_DEV_00 -w: 0 -d: 20080109 -t: 073032 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework TeamHello,
Little extract from the SAP online help :
In Web Dynpro ABAP it is imperative that a client browser with a fully qualified domain name (FQDN) has access to the AS-ABAP. For this reason the full URL must be assigned to a Web Dynpro ABAP application when it is called. The URL must not be shortened (for instance, no domain specification).
More info on how you should do this can be found here :
[Click|http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm]
This will solve your problem.
Success.
Wim -
Error occured while showing adobe form in abap webdynpro application
Dear SAP-Masters ,
This is the mail regarding the error occured while showing adobe form in abap webdynpro application .
When i run the adobe form seperately it works fine but with abap web dynpro , i'll get following error .
Pls tell me how to resolve this problem .
The following error text was processed in the system D35 : WebDynpro Exception:
The error occurred on the application server DV35_D35_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CPHi Arjun ,
Thanx for ur reply ,
i got following results in ST22 dump analysis :
' An exception occurred that was not caught ' .
and
Source Code Extract
Line
SourceCde
79
x_xml = get_wd_context_as_xml( data_source = data_source ).
80
m_pdf_object->set_data( formdata = x_xml ).
81
catch cx_fp_exception into lr_fpexc.
82
raise exception type cx_wd_general
83
exporting
84
previous = lr_fpexc.
85
endtry.
86
if fillable = abap_true.
87
if m_version is initial.
88
m_version = m_pdf_object->get_version_info( ).
89
endif.
90
if version < ''.
91
set_usage_rights( m_pdf_object ).
92
endif.
93
endif.
94
endif.
95
endif.
96
97
only call the ads if requested
98
if execute_ads_call = abap_true.
99
try.
100
set document
101
m_pdf_object->set_document( pdfdata = pdf ).
102
103
execute, call ADS
104
m_pdf_object->execute( ).
105
106
get result
107
m_pdf_object->get_document( importing pdfdata = pdf ).
108
catch cx_fp_exception into lr_fpexc.
>>>>>
raise exception type cx_wd_general
110
exporting
111
previous = lr_fpexc.
112
endtry.
113
endif.
114
115
endmethod.
and
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_RUNTIME_SYSTEM", which was raised in the program
"CL_FP_PDF_OBJECT==============CP",
specifically in line 255 of the (include) program
"CL_FP_PDF_OBJECT==============CM02Y".
The cause of the exception was:
ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be
| imported into interactive forms.(201501). -
Unable to test WebDynpro Application
Hi,
I am learning WebDynPro Application development by installing SAP NetWeaver 7.1 Demo System from SDN.
I am able to view the Views as Preview in SE80 Layout TabPage and they work fine. But an activated WDA wont show up on my browser. I seem to be getting a set of errors that take turns, such as "Die URL enthält keine vollständige Domainangabe (sree statt sree.). "
Occasionally, a logon page is opened in the browser but i dont know what username/password to input. No matter what i input it wont work.
During installation I did not specify FQDN since I do not know what it is and since mine is a desktop installation.
I am new to WDA. Could someone help me with a detailed instruction to help solve the problem.
I have carried out the following:
OS: Win XP; Web Browser: IE 6
MS Loop Back Adapter Installed as instructed.
Java Runtime Engine 1.4.2 installed as instructed in installation.
Host name set up in : e:WINDOWSsystem32driversetchosts as 192.168.0.2 NSP
The above IP is connected to home wireless Router network, and internet connection is working fine
Installation of Netweaver 7.1 Demo system carried out with no errors.So did not carry out any post installation steps but able to work with the demosystem alright.
SICF activation of services carried out as per the help link Active Services in SICF
For example, I am trying to run demo_flash_flight application and its ICF is seen as active as shown in GO TO > HTTP Service Maintenance
One of the many different errors that come up are :
The URL http://sree:8000/sap/bc/webdynpro/sap/demo_flash_flight was not called due to an error
The following error text was processed in the system NSP : Die URL enthält keine vollständige Domainangabe (sree statt sree.).
The error occurred on the application server sree_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
Guess the link has to be https instead of http. How to switch this to HTTPS.
Tried setting up user name/password in the WDA service was not successful.
Thanks in advance for any pointers.
CheersHi Andreas,
Thanks for the suggestion. It works. )
But couple of questions.
1)It takes a long time to load.
2) Everytime, i have to manually change the url from hostname to <localhost>:8000.
3)Also what is the default username / password for SAP WAS. Is it right to assume, each time i start the instance, the WAS is also started? is there a way i can tune it so that the browser loads happen fast.
The above questions are not show stoppers. I am able to work with the programs. Thanks for the suggestion. Going by the SDN posts, there are many who have had this problem. Your suggestion is definitely a helper.
thanks heaps!
Cheers Sree -
To get login details of portal into webdynpro application
Hi All,
How to get the portal login details(user name) into my webdynpro application.
Thank you,
Harsha P.Hi,
If you want to have portal login details from backend system (with ABAP) you should ask this question in some portal forum and ask if it is possible. This has nothing to do with workflow or UWL. Even if you get the portal user ID to the backend system, then what? Do you want to manipulate the portal roles etc. from your ABAP WD application? Then you will have even more complicated requirements to achieve with ABAP. It is not that straightforward to call different portal functionalities from backend system. You might need to do some "portal development". And eventually your ABAP WD application might come just an unnecessary wrapper component for calling some web services or whatever in portal.
Regards,
Karri -
Needs a background webdynpro application running at the server side
Hi All,
We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R/3 tables.
We are thinking of a webdynpro java application.
Can anyone suggest what kind of application needs to be implemented here?
And what would be the steps required to run the application at the server side without calling the application.
Thanks & Regards,
AnuragHi Robin,
Thanks for the detailed explaination.
This may sound silly to you but I've another doubt which is as follows:
As you mentioned that the external web application will be sending requests to our Web service(in SOAP envelopes) and rest of the functionality can be achieved by our web service.
Actually, we are expecting only responses from the external web application. The thing is that we are sending the requests to the external web applications from our custom webdynpro application and in return the web application will be sending us 2 responses.
First response would be back to our WD java application URL(to the browser in which WD java app is running) which would get the response and display some message based on the response.
Second would be to this web service which you have just suggested. We are having two responses so that even if the browser in which the WD java application is running gets accidentally closed, the response from the external web application must get captured somewhere else and should not get lost in any case.
So, now since we are only expecting the response from the web application and we do not want any requests from the web application to our web service; how is this possible?
I am asking the above question because you have mentioned that the external web application has to request our Web service but we want is only this web service to capture the response coming from the Web application.
Or is it like the web application will send us the response string as request string to our Web Service and the web service will capture these response parameters as request parameters from the web application and do the further processing.
But in that case, we do not want any response to be sent by the Web Service to the external web application.
Please suggest if this is possible.
Once again, many thanks for the help so far.
Thanks & Regards,
Anurag -
SSO b/w portal and webdynpro application customized login??
Hi,
I have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller). if user credentials are correct it performs some actions defined in webdynpro application.
I want to configure SSO b/w portal and this webdynpro application sothat when user logon to the portal and open this webdypro application, Login page of webdynpro application should not be shown i.e user credentials should be passed from portal and corresponding authentication method in webdynpro should be called to authenticate the user.
How to do the same without touching webdypro application ?
Can we call a method of webdynpro application from portal?
Regards
Deepak1) To enable ticket authentication for the web dynpro iviews, you must maintain the definition of the system running the Web Dynpro application and set logon method to "SAPLOG"
2)Since you have customized login screen, you need to bypass this screen manually when you login from portal.
Add parameter to the application while defining the iview.Give some constant value.
Check value of this parameter in webdynpro and fire to next view. -
How To Get GP Process Parameters in a Webdynpro Application runtime
Hi ,
Iu2019 ll hope you can help me to solve my problem with GP process.
Iu2019 m trying to get GP process parameters from a Webdynpro application.
I have to get parameters during the process runtime in every step of the process using
a webdynpro application with the following code:
IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
try {
IGPProcessInstance processInst = rtm.getProcessInstance(processId,userContext);
IGPProcessInstanceInfo procInfo = rtm.getProcessInstanceInformation(processInst.getID(),
userContext.getSAPUser());
IGPStructureInfo inputstructInfo = processInst.getTemplate().getInputParameters();
IGPStructure inputparams = GPStructureFactory.getStructure(inputstructInfo);
} catch (GPEngineException e) {
// TODO Auto-generated catch block
// e.printStackTrace();
manager.reportException("GPEngineException:"+getStackTrace(e), false);
} catch (GPInvocationException e) {
// TODO Auto-generated catch block
// e.printStackTrace();
manager.reportException("GPInvocationException:"+getStackTrace(e), false);
But printing the values of attributes with u201Cinputparams.getAttributeAs... ("param name")u201C the value returned is always 0. On the contrary if I check the same parameters structure in the runtime
GP view of the portal, the values are those that I have set in the start process wizard.
Have you a solution for this question?
Thanks in advance
Lucahi Abhimanyu
I believe originally access to session was deliberately not made available inside WDA.
Growing security concerns due to misuse of session information and
perhaps other reasons as well.
X.509 is considered a better approach.
This may not help you in your problem.
But you may see a trend in WDA pushing more robust and client independent
approaches.
Full x.509 access should remove the need for session fiddling.
Also when developers access such session info directly, there is a possiblity
when they dont understand the technology exactly that they create a security hole.
You may know how to do safely, it is however discouraged.
Im not aware of a way to get at the session info inside the WDA framework.
Well not without a mod to the framework.
It may be possible without a mod, but I dont know the trick.
If someone has a little trick... please post.
You may need to use BSP, if your only solution requires access to the session info.
regards
Phil -
Database connection in a WebDynpro Application - urgent
Hi
I am facing a problem with database connection. I am trying to develop a normal webdynpro application.
I want to retrieve data from a table and show it.
But my query is not giving the expected output. It is not even raising errors.
Please give me an answer
Thanks & regards
AparnnaConnection con=null;
Statement st=null;
ResultSet rs=null;
public void wdDoInit()
//@@begin wdDoInit()
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:erdsn","root","enteg123");
st=con.createStatement();
catch(Exception e){
//@@end
public void onActiononClickLogin(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActiononClickLogin(ServerEvent)
String desig=null;
try{
rs = st.executeQuery("select * from Login where Empid like uid and Pword like pw");
if(rs.next()){
desig=rs.getString("Designation");
wdComponentAPI.getComponent().getMessageManager().reportSuccess(desig);
if(desig.equalsIgnoreCase("Employee")){
wdThis.wdFirePlugEmpOutPlug();
else
wdComponentAPI.getComponent().getMessageManager().reportWarning("Invalid input!");
}catch(Exception e){ -
Need help in developing a webdynpro application using UWL API
Hi developers,
Iam developing a new WebDynpro application for UWL using UWL API.the functionality is to dispaly the summary of UWL like number of unread items, total items.
Iam getting the problem while deploying the application, iam getting warning while deployed the application.
I have given all possible ways mentioned in the below forum link
Re: Accessing PortalRuntime at runtime?
The exact problem is coming at reference file.
Please giude me how to move forward.
1. Below is the error when given "tckmcbc.uwl~api" in the service entry
deployed with warning :
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application local/UWLCountDemo for startup. Reason=Clusterwide exception: Failed to start dependent service ''tckmcbc.uwl~api'' of application ''local/UWLCountDemo''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
2.Below is the error when i gave PORTAL:sap.com/tckmcbc.uwl~api in the sharing refernce entry
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/UWLCountDemo cannot be started. Reason: it has hard reference to resource tckmcbc.uwl~api with type application, which is not active on the server.
Thanks in Advance
Sekhar.
Edited by: sekhar c on Mar 21, 2009 11:24 AMPlease see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's. -
Single Webdynpro Application with multiple JCO Connection ?
Hi Experts,
I have a strange requirement ......
We have a Webdynpro Application which is connected to
say (using JCO connection)
client:- A
now i want to connect the same Webdynpro application to
Client:- B which is again in the same server as the client A.
Please help me how to handle this.
how it possible to connect a single Webdynpro application to two different clients using JCO Connection.
Please help.
Points would be rewarded to helpful answers.
Regards,
Sanjyoti.Hi experts
We have to use wd application for both client at a same time e.g. as follow
Client A -
> Travel app--->Featches data from A for employee hired in client A ,in same server as B
Client B -
> Travel app--->Featches data from B for employee hired in client B , in same server as A
we are using same EP for both client but using diffrent roles for employees of both client.
Please reply asap.
Maybe you are looking for
-
404 File not found error in jdeveloper
Hi all, I developed a jsp page in jdeveloper and I added all the required files. The page was compiled successfully. But when i ran the page it shows 404 File Not Found Error. web.xml is not added to my project. Can anyone help me Regards, Kannan
-
I recently built a new computer running Win 8.1. However, I have had trouble sending and receiving attachments with Earthlink Webmail on Firefox. I sometimes cannot see attachments to emails I receive, although the size of the file indicates they are
-
HI All, I need tables regarding Cost Center and its CC Budget amount & Internal Order and its IO Budget Amount. Could you please give some tables to fulfill my requirement Thanks in advance regard Vishnu
-
What limitations are you finding in FormsCentral? What are the solutions?
1. There's no way to reduce the height of the fields. 2. There's limited formatting options. This form has more formatting options than FormsCentral. No Styles, Bullets, numbering, etc. 3. When in Design mode, there is no way to increase the view. If
-
I don't understand lazy loading
Could someone please help me understand lazy loading... I have a simple ORM model where Users have a OneToMany mapping to providers... But when I run public Users getUser(Long id){ Users u = em.find(Users.class, id); List pu = u.getProviderUsers(); S