Webdynpro application time out in portal

Hi all,
I am trying to perform a batch of process in my webdynpro application.
I selected 100 records in my view which are displayed in a table ,for updateding..
Upon selction of these 100 recoreds and on click of submit it is giving portal
time out after a few seconds..
where the problem can be??Is it in front view(webdynpro code means giving the selected records as input to the function module) or at the backend(mesns at BAPI's)
Can anyone please tell me where problem might be ??
Regards
Padma N

Similar Messages

Closing a webdynpro application, should call a portal page

Hi All,
I have a requirement in which, after a webdynpro application is closed in portal, the portal should show the workset content from which the webdynpro application is triggered.
For example,
Wedynpro application Created is ZWDA1.
Two iviews are created in portal which refers to the webdynpro application ZWDA1, the portal Iview names are ZPORTAL_IVIEW1, ZPORTAL_IVIEW2.
Two worksets ZWORKSET1 & ZWORKSET2 are created in portal which refers to Iview ZPORTAL_IVEW1 and ZPORTAL_IVEW2 respectively.
Two roles ZROLE1 & ZROLES2 are created in portal which refers to workset ZWORKSET1 & ZWORKSET2 resepectively. These two roles are assigned to users ZUSER1 and ZUSER2, when these user logs into portal they will see the content of the workset ZWORKSET1 & ZWORKSET2 respectively.
Assuming ZUSER1 and ZUSER2 invokes the portal ivew ZPORTAL_IVEW1 & ZPORTAL_IVEW2, the underlying webdynpro application called is same. So in the webdynpro application only I need to write the code to close the application and call the workset ZWORKSET1 for ZUSER1 and workset ZWORKSET2 FOR ZUSER2. This differentiation I am not able to indentify in webdynpro application, I thought of using relative navigation.
Any suggestion to achieve this functionality is greatly appreciatable
Regards,
H.K.Hayath Basha.

Just closing the message

Application times out or just stops working during publication

I just installed Presenter 9.0 (64 bit). I am trying to publish to pdf (an interactive pdf) from existing PowerPoint files. Almost always the application times out before it completes the pdf. Sometimes it just shuts down quickly. I can generally get the pdf if I reverse the PowerPoint format, i.e. change a ppt to a pptx after it has timed out once. Any thoughts?

Hi,
Could you please share the problematic pptx file with me ?
Inbox me at [email protected]
Thanks
Alpi Agarwal
Adobe Presenter Engineering Team

BSP Session times out in Portal iView

HI,
I have a stateful BSP Application with two pages. First BSP Page navigates via a POST to third party site from which, the request returns back to the original BSP to the second page. I pass the url of the application, along with the session information, with the name of the second page to the site, using which the site posts the request back to the BSP. I have increased the session time out in ICF to 10 minutes. This works fine when executed as a standalone application.
I use the same BSP, as an iView in the Portal, and i get the Session Timed out error. I have selected the checkbox for the property "Supports Portal integration" in the application.
If i do not pass the session information, then the user is prompted to provide the credentials for the SAP system when the request returns from the third party site in the Portal.
Please provide your inputs/help on this.
Thanks,
Regards,
Siddhartha

Can you share how did u solve?
Raja T

Application time out

Hi Experts,
We have a requirement in which we have to give the option to customer to set application timeout according to there requirement.
We have webdynpro application.
Could you please tell me how we can achieve this.
Thanks,
Sudhanshu

full solution it is only possible using JScript
samples:
SAP Network Blog: Portal user idle timeout using dialog windows - Client side solution
/people/santhosh.lingaraju/blog/2008/11/05/portal-user-idle-timeout-using-dialog-windows--client-side-solution
HOWTO handle portal user idle timeout
http://wiki.sdn.sap.com/wiki/display/EP/EPSnippet-Portaluseridletimeoutforlogoff-custom+javascript
and step by step solution and explanation:
SAP Portal User Idle Timeout using JavaScript and YUI 3 (Yahoo User Interface)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/309379b6-bb9b-2d10-feb1-91f2a7078574?quicklink=index&overridelayout=true
hope it helps

Setting application time outs in OC4J

Our application is deployed in OC4J (Candidate Release). It all works fine except for a small problem. if the application is left running and is accessed from the browser and left alone in the browser for abt 10 mins, and then we proceed we get a null pointer exception. Now we realise that this is a time out problem which occurs in OC4J. Now is there ne way to set up application level timeouts in OC4J ? This would be rather useful :-)
cheers
Karthik

Hi Karthik,
I don't know the answer to your question but there are two Web
sites that have the OrionServer documentation available:
http://www.orionserver.com/docs/index.html
http://kb.atlassian.com/content/orion/docs/
Hope This Helps,
Avi.

Color changed when webdynpro application is called from Portal

Hi,
I have developed an Webdynpro application, but the orginal color has been changed if I call it from portal.
Does someone have an idea how to deal with it?
best regards

Hi,
The attribute name in iView configuration is 'Supply Portal Stylesheet'. It should be marked as 'No' to not to use the Portal Style Sheet.
Ranganathan.

Windows Handheld application Time out issues.

How to Handle Windows Handheld Application idle time out issues.

For your reference I found something interesting stuff:
http://www.hjgode.de/wp/2011/07/04/wm-6-5-remote-desktop-client-disconnects-after-10-minutes/comment-page-1/
and a blog:http://blogs.msdn.com/b/raffael/archive/2009/09/11/remote-desktop-mobile-rdp-client-disconnects-after-10-minutes-of-inactivity.aspx
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Services running in time out and portal stays in starting application

Hi Group,
when starting the portal (sp12 on windows) the status is running into "starting applications" and don't change to running.
In the server logfile I found:
Timed out services:
Service ssl.
Service tc.monitoring.logviewer.
Service keystore.
Service shell.
Service prtbridge.
Service webdynpro.
Service com.sap.security.core.ume.service.
Service pmi.
Service tcsecsaml~service.
Service sld.
Service com.sap.portal.prt.sapj2ee.
Service jms_provider.
Service basicadmin.
Service classload.
Service adminadapter.
Service telnet.
Service servlet_jsp.
Service ejb.
Service dsr.
Service monitor.
Service tcsecdestinations~service.
Service tcsecsecurestorage~service.
Service security.
Service applocking.
Service com.sap.portal.pcd.gl.
Service jmx.
Service DQE.
Service tceCATTPingservice.
Service rfcengine.
================================================================================
Full thread dump Java HotSpot(TM) Server VM (1.4.2_09-b05 mixed mode):
"Thread-12" daemon prio=10 tid=0x055bc2f8 nid=0xff0 in Object.wait() [7f4f000..7f4fd94]
 at java.lang.Object.wait(Native Method)
 - waiting on <0x11ad9298> (a java.util.TaskQueue)
 at java.util.TimerThread.mainLoop(Timer.java:429)
 - locked <0x11ad9298> (a java.util.TaskQueue)
 at java.util.TimerThread.run(Timer.java:382)
"ConnectionSetCleaner Thread (UNMANAGED)." prio=10 tid=0x0433ccf8 nid=0x1c8 in Object.wait() [7f0f000..7f0fd94]
 at java.lang.Object.wait(Native Method)
 - waiting on <0x17810060> (a com.sap.engine.services.connector.jca.ConnectionHashSet$ConnectionSetCleaner)
 at com.sap.engine.services.connector.jca.ConnectionHashSet$ConnectionSetCleaner.run(ConnectionHashSet.java:636)
 - locked <0x17810060> (a com.sap.engine.services.connector.jca.ConnectionHashSet$ConnectionSetCleaner)
"SAPEngine_System_Thread[impl:5]_73" prio=5 tid=0x044f95d0 nid=0xdc in Object.wait() [6ecf000..6ecfd94]
 at java.lang.Object.wait(Native Method)
 - waiting on <0x17810118> (a com.sap.engine.lib.util.WaitQueue)
 at java.lang.Object.wait(Object.java:429)
 at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
 - locked <0x17810118> (a com.sap.engine.lib.util.WaitQueue)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:121)
"SAPEngine_System_Thread[impl:5]_72" prio=5 tid=0x05825c58 nid=0xbc0 in Object.wait() [6e7f000..6e7fd94]
 at java.lang.Object.wait(Native Method)
 - waiting on <0x17810118> (a com.sap.engine.lib.util.WaitQueue)
 at java.lang.Object.wait(Object.java:429)
 at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
 - locked <0x17810118> (a com.sap.engine.lib.util.WaitQueue)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:121)
"SAPEngine_System_Thread[impl:5]_71" prio=5 tid=0x047e74f8 nid=0xc6c in Object.wait() [6e3f000..6e3fd94]
 at java.lang.Object.wait(Native Method)
 - waiting on <0x17810118> (a com.sap.engine.lib.util.WaitQueue)
 at java.lang.Object.wait(Object.java:429)
 at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
 - locked <0x17810118> (a com.sap.engine.lib.util.WaitQueue)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:121)
what went wrong?
Kind regards,
Mike

Did you ever find an answer? I'm having the exact same error on Solaris.

Portal Application times out.

I have developed a portal application on EP6 SP2 on windows.
Everything works fine, except we are getting intermittent
runtime errors. It appears as if the component has been
removed from memory. This happens after a variable amount
of time. It appears to happen more frequently
when there are more users testing the application simultaneously.
There are RFC calls to te R3 back end, but it is not only these
that fail.
Any suggestions?

Dirk,
take a look at the following post.
Re: Sporadic error when getting data from Bean

Webdynpro Applications expire all the time

Hi,
I am facing a huge problem with my WebDynpro applications. I am running SAP EP 6.0 SP and a separate WebAS 6.4 SP 12.
I am not deploying my WebDynpro applications on the SAP Enterprise Portal WebAS Server.
The problem that I have regardless of integration in Enterprise portal is that my WebDynpro applications time out all the time.
Even though I click around in the IView, after a few minutes, I get a message,
The WebDynpro application has expired. Please click on this link XXX to restart the application
I have gone to the configuration adaptor and set the default expiration time to 3600. ..I increased it just to try..to 7000..
I have also additionally set the time in each WebDynpro applications to sapExpirationTime = 3600
I am using fully qualified domain names so that shouldn't be a problem.
Just to know...the Portal and the WAS used for deployed content run on the same machine on different port.
Has anyone faced this problem and found a solution?

Hi,
I am facing a huge problem with my WebDynpro applications. I am running SAP EP 6.0 SP and a separate WebAS 6.4 SP 12.
I am not deploying my WebDynpro applications on the SAP Enterprise Portal WebAS Server.
The problem that I have regardless of integration in Enterprise portal is that my WebDynpro applications time out all the time.
Even though I click around in the IView, after a few minutes, I get a message,
The WebDynpro application has expired. Please click on this link XXX to restart the application
I have gone to the configuration adaptor and set the default expiration time to 3600. ..I increased it just to try..to 7000..
I have also additionally set the time in each WebDynpro applications to sapExpirationTime = 3600
I am using fully qualified domain names so that shouldn't be a problem.
Just to know...the Portal and the WAS used for deployed content run on the same machine on different port.
Has anyone faced this problem and found a solution?

Crystal report Viewer Session times out for more data in Portal

Hi All,
 I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
 pageEncoding="ISO-8859-1" session="false"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
 import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
 <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
 <%@page
 import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
 <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
 String reportPath,Sharedpath;
 ReportClientDocument reportClientDocument;
 ParameterFieldController parameterFieldController;
 try{
 reportPath = "reportlocation";
 Sharedpath = "Target Location";
 reportClientDocument = new ReportClientDocument();
 reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
 reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
 reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
 System.out.println("Connecting...");
 parameterFieldController = reportClientDocument.getDataDefController()
 .getParameterFieldController();
 parameterFieldController.setCurrentValues("", "param 1",
 new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
 new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
 reportClientDocument.close();
 System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
 System.out.println("Finished...");
 } catch (ReportSDKException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
%>

Hi All,
 I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
 pageEncoding="ISO-8859-1" session="false"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
 import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
 <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
 import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
 import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
 <%@page
 import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
 <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
 String reportPath,Sharedpath;
 ReportClientDocument reportClientDocument;
 ParameterFieldController parameterFieldController;
 try{
 reportPath = "reportlocation";
 Sharedpath = "Target Location";
 reportClientDocument = new ReportClientDocument();
 reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
 reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
 reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
 System.out.println("Connecting...");
 parameterFieldController = reportClientDocument.getDataDefController()
 .getParameterFieldController();
 parameterFieldController.setCurrentValues("", "param 1",
 new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
 new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
 reportClientDocument.close();
 System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
 System.out.println("Finished...");
 } catch (ReportSDKException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
%>

How to create an iview for ABAP Webdynpro Application in Portal?

HI,
I am Webdynpro Java webdynpro developer.
I want to create an IVIEW for an ABAP Webdynpro application in the enterprise portal.

The process is almost exactly the same as creating a Web Dynpro Java iView. You simply chose the ABAP instead of the Java radio button when you reach that step in the Web Dynpro iView creation process. There is a video on the topic here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/eae111e7-0b01-0010-6cb7-e0dd2bfbfa7a
You can also read about the process in the online help:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1d/e4a34273f60b31e10000000a1550b0/frameset.htm

Webdynpro application not taking Portal Theme

Hello,
Our webdynpro applications are not taking portal themes. How can we have the applications take the portal themes?
Regards
Bobu

Hello,
When creating a portal IView for a webdynpo application we will have a property called as Supply portal style sheet. If this property is set to Yes then the webdynpro applications will take the Portal style sheet.
Regards,
Raju Bonagiri

Webdynpro applications

Hi ,
I am beginner as developer . I need to know if the webdynpro applications can use the portal database (wiich is oraqcle) or the database at the backend has to be neccessarily an R3 server .If they can use the portal database then let's say that I have to create a table in the portal database how do I do that ?
Also as I am aware that webdynpro applications can be directly deployed on portal through NWDS . But I also know that they can be sca or sda files which can be deployed using SDM . How do I make an sca file out of a webdynpro applications or if they are automatically made then where will I find the sca file correspoding to my webdynpro application ?
Regards
Deepak Singh

Hi,
Creating table from NWDS
http://help.sap.com/saphelp_erp2005/helpdata/en/b5/8aa8d84f758b4e9fa20a6c12f5e647/frameset.htm
conversion of ear,sdaand sca files
http://help.sap.com/saphelp_erp2005/helpdata/en/a3/782240da03e569e10000000a155106/frameset.htm
Aneez
Pls award points if this is helpful

Webdynpro application time out in portal

Similar Messages

Maybe you are looking for