WebDynpro : BIApplicationFrame : Help needed

Hello Experts,
I need your urgent help.
I have created a web template in Web Application Designer. In this template I have created a data provider which is based on a query. If I execute this query directly from WAD then it executes successfully.
However I want to execute the query in WD application. For this I have created a simple WD component and then created a view in it. In the view I have inserted a BIApplicationFrame type UI element. I have defined the properties of this UI element. In the properties in DataProviderStateName : I have given the DP name what I created in WebTemplate, In the DataProviderType I have given the Query.I have also given the template id.
I have also created a node on view context and controller context and mapped both of these.
But as soon as I execute the WD application, only the blank frame comes up. If I see on the left bottom of the web page then there is a yellow icon which says that error occurred, permission denied.
I am now clueless, that where I am going wrong. Do I need to write any ABAP code to use BIApplicationFrame ? Or do I need to bind something ?
My query is a simple qyery without any filter.
Please help.
Amit

Hi,
You can have only one datasource in PDF at a time. What I would suggest you is create a DataSource node of Cardinality 1..1 and then move these two nodes into newly created node. and select this node as the DataSource for PDF.
Hope this helps,
Amit

Similar Messages

BIapplicationFrame : Help needed

Hello Experts,
I need your urgent help.
I have created a web template in Web Application Designer. In this template I have created a data provider which is based on a query. If I execute this query directly from WAD then it executes successfully.
However I want to execute the query in WD application. For this I have created a simple WD component and then created a view in it. In the view I have inserted a BIApplicationFrame type UI element. I have defined the properties of this UI element. In the properties in DataProviderStateName : I have given the DP name what I created in WebTemplate, In the DataProviderType I have given the Query.I have also given the template id.
I have also created a node on view context and controller context and mapped both of these.
But as soon as I execute the WD application, only the blank frame comes up. If I see on the left bottom of the web page then there is a yellow icon which says that error occurred, permission denied.
I am now clueless, that where I am going wrong. Do I need to write any ABAP code to use BIApplicationFrame ? Or do I need to bind something ?
My query is a simple qyery without any filter.
Please help.
Amit

Hello Amit,
Have you used the 7.0 WAD? If so, it is currently not supported. You need to use the 3.5 one. The difference is that the current BI integration in Web Dynpro ABAP only allows for ABAP based BI content.
Best regards,
Thomas

How to use webdynpro abap? need separate software? or please help me.. :-)

How to use webdynpro abap? need any separate software? if no, please help me with Transaction Codes..
Thanks in Advance
-Parthi
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Oct 19, 2011 8:18 PM

I don't think you quite understand how hibernation mode works.
"The state of a computer is stored into its main memory, which is also called RAM. When a
computer is powered off, the contents of this memory are irremediably wiped out. Hiberna-
tion works in the following way: before being powered off, the computer saves all the con-
tents of the memory to a ﬁle on the hard disk drive. On wake up, data stored in this ﬁle is
read out and restored to the memory. Therefore, the RAM contents are the same before
and after the hibernation process, and the state of the computer is also the same. The
saved ﬁle is named sleepimage, and is located in the /private/var/vm directory. Hi-
bernation is sometimes also called “software suspend” or “suspend to disk”.
The default suspension feature of Mac OS X, called sleep works in a different way. When
entering sleep, every subsystem of the computer is shut down, except the main memory
which is still powered. This process preserves the contents of the memory, and allows the
computer to wake up quickly. However, a sleeping computer still consumes a small
amount of power. Sleep is sometimes also called “hardware suspend” or “suspend to
RAM”.
Apple introduced the safe sleep feature in Mac OS X 10.4.3 for the Powerbook HD line of
laptops. This feature is a variation of the default suspension behavior. The main memory is
still powered during the sleep, but the contents of the memory are also saved to the disk at
the beginning of the operation. The saved ﬁle will only be used if the laptop runs out of bat-
tery power while sleeping, in order to restore the original state of the computer.
This safe sleep feature is what makes hibernation possible in Mac OS X 10.4.3 and above."
Quoted from *Deep Sleep v. 0.7 documentation*
Matthieu Beaumel, 10/03/2006

Portal integrating with XI - help needed;

Hi,
Scenario Description:
End users are accessing many portals to book orders which will be stored in some x-database. I need to retrieve the data from the x-database and generate a sales order. In response customer should get an transaction ID as a mail.
Could any one please help me how to proceed further.
Do I need to use BPM ( like JDBC - RFC - mail)
without BPM if possible ( Please explain)
Do i need to use any Webservices for the scenario.
Cheers,
Shetty.....

You can create an application using Webdynpro and make it public in portal. That application can access XI by webservices (using Sender SOAP Adapter in XI). Inside XI you can use BPM or not and use jdbc adapter, rfc or whatever you need.
Webdynpro:
http://help.sap.com/saphelp_nw70/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm
Soap Adapter:
http://help.sap.com/saphelp_nw2004s/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/content.htm

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIE

In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Help needed! Raid degraded again!

Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!

I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed in Finding Download location for Sun One Portal 7

Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AM

try edelivery.oracle.com under sun products.

Help needed in constructing a tree

Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
Please suggest me how to add the arrays to second column for parent and child nodes.
Solved!
Go to Solution.
Attachments:
Tree_fix.vi ‏15 KB

The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Help needed on CD740 ???

Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
Thanx.

I tried compling servlet, but it is raising error
that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

WebDynpro : BIApplicationFrame : Help needed

Similar Messages

Maybe you are looking for