Webdynpro does not fit user's screen

Hi All.
How can we make sure that the webdynpro screen fits the user screen whatever resolution he might be using Without horizontal scrolling?
I have tried all layouts. But if my table or any particular row is too wide, automatically horizontal scroll comes.
I tried to put RootUielement width to 100% thinking that it means 100% of screen. But no luck.
Any suggestions please?
Thanks in adv.

>exactly as many columns as are there in the table - say 14, so we fix scrollablecolcount to 14
Why would you do that?  If yo uset scrollableColCount to the same number of cols that are in the table it has no effect.  You might was well just leave the property alone.  It is only useful if you want to restrict the number of columns shown on screen.
>Then we reduce the width to some% so as to fit the screen.
Yes but keep in mind that this will only work if there is still enough room to display all of the data. The % and pixel widths only work to widen the table, they don't restict it if there isn't enough room. What would want the rendering to do - cut off part of the table?
>when we specify width, what is SAP's recommended way -> Is it in percentage or in Pixels?
Both are supported so it depends upon your needs. Are you designing for a very specific width that won't change as the window is resized - then use pixels.  Otherwise use percent.
>are there any other units we could specify?
Pixel and percent are the most common, although any CSS Unit of Measure should work. Here is a complete listing:
http://www.devx.com/projectcool/Article/19850
A couple of tips - don't mix units of measure between your table columns and the table width itself.  The size of the cell content always overrides the column width and/or the table width. That is why if you have too much data or too many columns your only way to reduce the total width of the table is to use the scrollable columns to reduce how many are displayed at once.

Similar Messages

  • Photo does not fit in the screen

    I watched that video http://www.youtube.com/watch?v=KJMi5l9Ru-g     and tried this to do the parallax scrolling with the image this on my page. Unfortunately, my photo does not fit in the whle screen, even if I take a . jpg image  3000 px wide. ( look here ) I have no idea how I can get the photo to fit in the whole screen.
    Thank you for your help.
    Heike

    Hello again,
    I'm sorry, but nothing works and I don't understand, what you mean. I will show you again with no other item on the page. I draw a rectangle which snaps each of the lines at the outside.
    I got rid of the stroke and the fill.
    I filled with a .jpg image 3000 px wide.
    For the future parallax scrolling I need to set up the photo in vertical tile. And this is, how it shows on the screen.
    I still have no idea, what I made wrong. Thanks for your help
    Heike

  • Itunes still does not fit on my screen.  How can I make this happen?

    Itunes does not fit my screen so I cannot even see the scroll bar.  Can I fix this?

    I asked the same question a couple of days ago.  Today I read a similar post and read that there are sync issues with a 5C do two things power down the computer, make sure that no applications are running on the 5C.  When the computer restarts it will connect to the 5C after the drivers install.  At least this worked for me. I am using Windows 7, iOS 7.0.4, and iTunes 11.1.3.8 .

  • PSE 9; Fitting image to screen, does not fit image to screen

    Hi,
    I have some problems since last upgrade of Photoshop Elements 9.
    Suddenly, when I am using the editor, when I want to resize the image to fit the screen, it does not do that anymore.
    The image does change size, but it is considerably smaller than the screen, (or rather the available area in the editor workspace).
    For example, with an image in portrait mode, Fit to screen makes it as 11%, with considerable space above and under the image.
    If I zoom this image manually, entering a number 16% fits the screen.
    This used to work before.
    How can I make it work?
    I am sure there is some settiing, but I cannot find it.
    And, it seems, that it ceased to work after the last upgrade, a couple of weeks ago. It is now PSE 9.0.3.
    Of cause, it might have been something I did that made it cease working.
    I don't care. But where is the setting that makes this work?
    /Anna

      Try dragging out the tab containing the image; so that it floats.
    Then drag the triangle corner at the bottom right - you can cover a big part of the screen real estate whilst still keeping the tools pallet and menu bar visible.
    You can also click Edit à Preference à General
    Then check the item Zoom With Scroll Wheel
    That will let you fill or reduce the window contents quite quickly.
     

  • Photoshop elements 11 toolbar does not fit on my screen

    I'm trying to use Photoshop elements 11 on my notebook computer, but the toolbar is too big to fit on the screen, and some of the icons are not accessible.  Is there any way to reduce the size or shape of the toolbar, or to scroll to the icons I can't see using the keyboard so I can still access them.  My computer is already set to the highest screen resolution.  Thanks for your help.

    I'm having the same problem, but on a laptop. PSE11 has been really badly laid out by the designers: I suspect they've been designing on their own large screens where there is plenty of screen area and completely forgotten the "portable" side of the market. IMO the toolbar on the left, dialogue box at the bottom and menu bars take up far too much real estate. I have a 15.6" widescreen laptop and the window for the image is unacceptably small. The "Quick/ Guided/ Expert" bar is ridulously large, and annoyingly mostly unpopulated which renders it pretty pointless!
    So as much as I want PSE11, I won't be buying it. Sorry Adobe, but dumbing down this software and poor screen layout has lost you a sale (and PS is too expensive, so I won't be buying that either). I liked PSE10. I downloaded a copy a week before PSE11 came out. Unfortunately I missed out on being able to buy PSE10 as it was too late by the time I decided to buy it.
    Oh well, let's see what happens with PSE12- that's out in about a year's time isn't it?

  • Window does not fit on my screen, see screen shot.

    In Photoshop CC when I open up a file I am unable grab the bottom of the window and adjust it, so when I make the image fit on the screen the bottom part of the image is cropped.  How do I resolve this?  See screen shot below.

    Hi,
    If you click on the Green Maximize button, does that work?

  • Image does not fit my TV screen

    Hi there
    I have a Panasonic PlasmaTV screen 1080P and when plugging it to my Macbook it seems that the image is bigger then my TV since I can't see the entirely the dock and worse of all is that I can't see the menu bar at the top.
    the only way to see the dock has been to go to the screen menu and click on overscan but then the image
    thanks in advance for the help

    OK, that's different. I guess the problem is that the screen resolution on the tablet is quite high and at the same time the screen is quite small - in other words the screen has a high dpi. I have the same issue with a Dell Windows 8.1 tablet. Most Windows app recognise this and automatically resize things so that you don't get unreadable font sizes. SAPgui doesn't. Until it does, you can manually set a larger font size in the SAPgui settings. That's the best you can do for now, I'm afraid.
    I don't know if there SAP have plans to ever address this. I hope so...
    Steve.

  • My picture is not fitting on the screen

    When I use the hdmi input on my pavilion 27xi the picture does not fit on the screen. I have tried other devices and different hdmi cables to check that none of them were faulty but they werent. On the monitors image control settings there is fill to screen or fill to aspect ratio which cant be sellected. Is there any soloution??

    stevblair97
    Welcome to the HP Community Forum.
    There is a solution in Windows and Linux; there may be a solution in OSX if you can get to the graphics controller on your Operating System and adjust the Aspect Ratio within the graphics controller software.
    For example, NVidia and Intel provides software within Windows and / or Linux that allows one to adjust the monitor Aspect Ratio for primary and secondary monitors.
    For Example:
    In Windows, assuming one is running an Intel Driver, one need only Right-Click on the Desktop to gain access to the Intel Graphics Properties.  While obviously different in OSX; it should be reliatively as easy to find the Graphics software, assuming you have access to it at all.
    I am sorry I do not speak Mac else I could be of more direct help in the matter.
    I hope this helps in some way.
    Click the Kudos Thumbs-Up to show you appreciate the help.
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • I have a macbook 13"screen purchased in 2007; I want to hook it up to my HDTV; I purchased a mini display port to hdmi adaptor but it does not fit.   what kind of adaptor will work for this model?

    I have a Macbook, 13" screen, purchased in 2007.    I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit.   Any suggestions?

    If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
    If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI.

  • Display does not fit in screen

    My computer display has stretched and does not fit anymore.  The text is not crisp and I cannot see the dock and the toolbars at the same time

    I tried that a while back.  I am on the proper resolution.  When I switch users the displays fit but when I switch back to my login page it does not fit   But thanks for your response

  • My igoogle homepage does not fit properly on my screen

    I use igoogle homepage and the layout does not fit. It is minimized currently to get the "firefox tab" at the top but the left side is only half visible.

    My igoogle homepage started loading off-center. I could hit "refresh" and it would then load properly, but I wanted it to load correctly from launch.
    After disabling add-ons (extensions), I discovered that the SKYPE extension was to blame. I uninstalled the extension and now the homepage loads correctly...centered.

  • Error: 'BP category 1 does not fit the data in category 2'

    Hi,
                i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
    thanks:)
    pushpa
    *table for storing the line by line records in the excel file
    TYPES: BEGIN OF TTAB,
            REC(1000) TYPE C,
           END OF TTAB.
    DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
    *variable for storing the name of the excel file to be uploaded
    DATA UP_FILE TYPE STRING.
    *data to be uploaded
    TYPES: BEGIN OF TDAT,
            FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
            FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
            FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
            FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
            FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
            FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
            FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
           END OF TDAT.
    DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
    DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
          CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
          ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
          ADDRESS TYPE BAPIBUS1006_ADDRESS,
          BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
    PARAMETERS P_FILE TYPE LOCALFILE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
        EXPORTING
          STATIC    = 'X'
        CHANGING
          FILE_NAME = P_FILE.
    START-OF-SELECTION.
      UP_FILE = P_FILE.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = UP_FILE
        TABLES
          DATA_TAB                = ITAB
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
    *writing out the contents of the internal table itab
      LOOP AT ITAB.
        WRITE:/ ITAB-REC.
        CLEAR IDAT.
        SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                    INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
        APPEND IDAT.
      ENDLOOP.
      LOOP AT IDAT.
        MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
              IDAT-FLD2 TO ADDRESS-STREET,
              IDAT-FLD3 TO ADDRESS-CITY,
              IDAT-FLD4 TO ADDRESS-REGION,
              IDAT-FLD5 TO ADDRESS-POSTL_COD1,
              IDAT-FLD6 TO ADDRESS-COUNTRY,
              IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
              '0001' TO CENTRALDATA-PARTNERTYPE.
        CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
          EXPORTING
            PARTNERCATEGORY         = '1'
            CENTRALDATA             = CENTRALDATA
            CENTRALDATAORGANIZATION = ORGANIZATION
            ADDRESSDATA             = ADDRESS
          IMPORTING
            BUSINESSPARTNER         = BUSINESSPARTNER
          TABLES
            RETURN                  = BAPIRETURN.
        IF BAPIRETURN IS NOT INITIAL.
          READ TABLE BAPIRETURN INDEX 1.
          MESSAGE
            ID BAPIRETURN-ID
            TYPE BAPIRETURN-TYPE
            NUMBER BAPIRETURN-NUMBER
            WITH BAPIRETURN-MESSAGE_V1
            BAPIRETURN-MESSAGE_V2
            BAPIRETURN-MESSAGE_V3
            BAPIRETURN-MESSAGE_V4.
          EXIT.
        ENDIF.
        REFRESH BAPIRETURN.
        CLEAR BAPIRETURN.
        CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
          EXPORTING
          BUSINESSPARTNER = BUSINESSPARTNER
          BUSINESSPARTNERROLE = 'BUP001'
          DIFFERENTIATIONTYPEVALUE =
          TABLES
          RETURN = BAPIRETURN.
        IF BAPIRETURN IS NOT INITIAL.
          READ TABLE BAPIRETURN INDEX 1.
          MESSAGE
            ID BAPIRETURN-ID
            TYPE BAPIRETURN-TYPE
            NUMBER BAPIRETURN-NUMBER
            WITH BAPIRETURN-MESSAGE_V1
            BAPIRETURN-MESSAGE_V2
            BAPIRETURN-MESSAGE_V3
            BAPIRETURN-MESSAGE_V4.
          EXIT.
        ENDIF.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
      ENDLOOP.

    Hi Pushpa,
             you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
    CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
        EXPORTING
          BUSINESSPARTNER           = SEARCH_PARTNER
          CONTACTPERSON             = CONTACT_SAP
      VALIDFROMDATE             = '00010101'
      VALIDUNTILDATE            = '99991231'
      DEFAULTRELATIONSHIP       =
      ADDRESSGUID               =
          CENTRALDATA             = WA_CENTRAL_DATA
          ADDRESSDATA             = WA_ADDR_DATA
          TABLES
        BAPIADTEL                 = I_TEL_DATA
        BAPIADFAX                 = I_FAX_DATA
      BAPIADTTX                 =
      BAPIADTLX                 =
        BAPIADSMTP                = I_EMAIL_DATA
      BAPIADRML                 =
      BAPIADX400                =
      BAPIADRFC                 =
      BAPIADPRT                 =
      BAPIADSSF                 =
      BAPIADURI                 =
      BAPIADPAG                 =
      BAPIAD_REM                =
      BAPICOMREM                =
         RETURN                    = I_RETURN
    hope this will help you
    Siva

  • IMac Does not boot past Gray Screen

    iMac does not boot past Gray Screen.  2008 24" Intel iMac running Mountain Lion with 1TB hard drive. 
    Problem started yesterday while I was web surfing, and my iMac frooze and shutdown.  I rebooted and could only get as far as the gray screen. 
    On bootup the following things happen:
    Startup tone
    Gray screen with Apple, and gear spins below Apple. 
    Once the gear stops spinning, nothing happends. 
    Troubleshooting steps I have tried:
    removed all devices connected to iMac and rebooted, but same symptons occur.
    booted into Safe mode and run disk utilites.
         Disk Utilities found no errors on the drive, but did find two permission issues that it was able to fix.
              First permission issue: 
                       "Group differs on library; Should be 0; group is 80"
              Second permission issue:
                        "Permissons differ on library; Should be drwxr-xr-x; They are drwxrwxr-t"
    Disk Utilities says it fixes these issues and then I reboot, but get the same problem.
    I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions.  It says it fixes them, I reboot, but the same problem occurs.  Its as if we are stuck in some sort of loop process. 
    Booted into Single User Mode and ran the following command:
         /SBin/fsck -fy   it reports back,  Volume Apprears to be ok. 
    I reboot, same issue !
    Performed SMC Reset, Rebooted, same issue
    Performed PRAM Reset, Rebooted, same issue.
    Booted into Recovery Partitioin (Command R) and ran disk utilities.  It found the same permission issues listed above.  It fixed them.  I rebooted.  Same problem still. 
    While in safe mode, I preformed a full time machine backup. 
    I am out of ideas.  Any help would be greatly appreciated. 

    Hello,
    I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions.
    You can ignore repeated "fixes" it's not really a problem, if it says completed repairs that's all that's needed.
    Luckily it boots in Safe Mode, here's basically the steps to try to find out what it is...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons
    Though I'm suspecting some corruption to your OS at the moment.

  • HT202213 I own toshiba laptops. Both computers have the latest itunes software. However the 'show menu' does not appear on the screen?

    I own toshiba laptops. Both computers have the latest itunes software. However the 'show menu' does not appear on the screen?

    Thanks for the response diesel. I dont think I clarified my question very well. I'm trying to do home sharing between mine and my wifes computers. The intructions say:
    Log in as the same user on each computer.
    Ensure both are current version.
    Choose the correct list in sharing ie Music
    Then in the 'show menu' at the bottom of the screen, choose items not in my library.
    I do not have the show menu to select any songs.
    Any help appreciated.
    Cheers

  • Table temp_bed_cess does not fit in to wondow vf02

    Hi,
      no print preview for a particular billing document number in VF02. but for the remaining billing documents the print preview is displaying. when clicked on ' issue output to ' screen is returned to the same screeen. This is a production server issue.
    the error is template does not fit into window

    Dear Sir,
        Thank you for all your replies,
      the window with same name is attached in two pages and thier dimensions are different.
    the window & template dimensions are as:
    window first page  
    height 2.90 cm
    width 12 cm
    regarding template
    c1 from 1 to 1     1 LN             9 cm  3 cm
    c2 from 2 to 2      0.96 LN       12 cm
    window second page
    height 2 cm
    width 12 cm
    regarding template
    c1 from 1 to 1     1 ln             9 cm  3 cm
    c2 from 2 to 2      0.96 ln       12 cm
    here the window height is more than the template total cells height, but why it is showing template does not fix in to the window.where as for other billing document , it is working fine, only for 6111108680.
    please help me.
    thanks & regards,
    Dastagir

Maybe you are looking for