WebDynPro: Drop-Down Box
Hi there,
I'm making a web dyn pro application which has a drop-down box in the initial screen.
I have populated the drop-down box with values and corresponding texts. When I click on the button that allows me to select a line, it shows me the texts but after the selection is made, it shows me the value in the drop-down box instead of the text.
Can anyone help on this issue?
Thanks.
Regards,
Edited by: Tabrez Hanif on Jun 22, 2009 1:01 PM
I think you need to put your text in the label right? Good Luck!
Similar Messages
-
How to fill a drop down box in a webdynpro application
Hi friends ,
i am facing one problem while filling a dropdown box with some hot coded values : " High","Medium","low"..etc..
drop down box having fixed elements always.....
means all values should be static and i have to fill it at design time only..
can any body pls reply for the above same......
Thanks and Regards
Ratnakar reddyHi Ratnakar,
If u r using Dropdown By Key, u can use the method that Armin suggested.
If u r using Dropdown By Index, then do the following
Let ur View Name be 'MyView'
1. In ur View Context,Create a Node(Say Root) of Cardinality 0..N
2. Create a value attribute(Say Name) in 'Root'.
3. In wdDoInit(), add the following code
IPrivateMyView.IRootNode rNode=wdContext.nodeRoot();
IPrivateMyView.IRootElement rEl=rNode.createRootElement();
rNode.addElement(rEl);
rEl.setName("HIGH");
rEl=rNode.createRootElement();
rNode.addElement(rEl);
rEl.setName("MEDIUM");
rEl=rNode.createRootElement();
rNode.addElement(rEl);
rEl.setName("LOW");
Hope this be Helpful
Fahad Hamsa -
How to handle Drop Down Box on Interactive Adobe Form
Hi,
On my adobe form there are some drop down boxes like company code, cost centre etc, actually i need F4 help on those fields, but what i found is it's not possible to have F4 help on adobe form so i have choosen alternative as webdynpro acitvex drop down box in library. I have written a web dynpro application to fetch the data and display it on adobe interactive form, i could able to display the data for all the fields on adobe form except these drop down boxes, can any body suggest me how to handle these drop down boxes in webdynpro application. Your help will be greatly appreciated.
Thansk & Regards,
VenkatHi Venkat,
As you are using the WDP ActiveX dropdown in your form, it is fine but to populate values in the DD, you need to bind the context attribute with a simpletype and then populate the values. Use the below code to obtain a ModifiableSimple Type:
IWDAttributeInfo abcInfo = wdContext.nodeABC().getNodeInfo().getAttribute("AttributeName");
ISimpleTypeModifiable def = abcInfo.getModifiableSimpleType();
IModifiableSimpleValueSet abcValueSet = def.getSVServices().getModifiableSimpleValueSet();
and after this put te values in the obtained modifieable simple type like below:
abcValueSet.put(key,value);
where key may be the ID and value may be the name to be displayed in DD.
Reward points if found helpful.
Regards,
Arafat -
Translation of drop down box values in Time Advice iview
We have an issue where the values in the drop down box for Team Time Advice iView -> Display more time statements is only appearing in English. The values are 3 months, 6 months and 12 months. If we log into the portal in French then everything is translated to French except the values in the drop down box.
I am looking to find where these can be translated. Is it possible via the SPRO like it is for values for Organizational Structure Views, or is it only possible by core modding the internal local Java Dictionary in the Java Webdynpro?
Thanks,
RichardHi,
It really depends on where those values are coming from. It is possible that something like that is actually part of the Web Dynpro Application itself and not something that is taken from the backend system, so not possible to modify in the iMG.
My suggestion is that if this is standard SAP code that you raise a support message with SAP esp. since as you say all the other text is translated into French, it might just be a bug that they will fix.
If it is your own custom code then you need to look and see where those values come from. You can internationalize WDJ apps as described in this link: http://help.sap.com/saphelp_NW70EHP1/helpdata/en/2d/e7381138a8d2458f1f4fac32614f71/frameset.htm
I hope that helps you,
Simon -
How to get ALL values as default for a drop down box in JSF
Hi,
I have a drop down box in JSF page which retrieves values from LOVCache.java. I have values like Company, Client, User, ALL in the drop down box.
By default blank value is selected for the drop down box. I want to make ALL(which retrieves data for all the values) as default value for the drop down box.
Could any body help me? Any help must be appreciated.
Thanks,
AseetThanks Nikhil. But I am fetching the values from the LOVCache.java.
I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
I mean to say can I write
unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
where LOVCache.entityTypeSelectionList is used to populate the drop down box.
Regards,
Aseet -
Create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box
HELP!!! Can anyone please provide some guidance on how to create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box.
I have a form which – based on the department that's selected from a drop-down box – will have different form fields/text boxes, etc, made available.
Is this possible in LiveCycle, if so, can you please provide the script/info - as needed.
Thanks,In the preOpen event of the second dropdown list you put something like (in formCalc):
if (dropdown1 == 1) then
$.clearItems()
$.setItems("Year, 2 Year, 3 Year")
elseif (dropdown1 == 2) then
$.clearItems()
$.setItems("3 Year, 4 Year")
endif -
Hebrew fonts from drop-down box not displaying in text box.
I am using InDesign CS 5.5 on a Mac 10.8.4.
When in ID, the fonts I am seeing on the Font dropdown menu when I try to use in a text box are not displaying correctly. They only display as boxes. The fonts are in the Hebrew language. They are properly installed in the FontBook.
Please help!! Thank you.Reema,
I followed most of your steps. I have a question reg. step 3 ie populating data in node 1.
Here is my code:
method WDDOINIT .
types: begin of zs,
zktokd type kna1-ktokd,
end of zs.
data: handle1 type ref to if_wd_context_node,
begin of zstruct,
zktokd type kna1-ktokd,
end of zstruct,
zitab type table of zs.
handle1 = wd_context->get_child_node( name = 'NODE1' ).
*select ktokd into corresponding fields of zstruct from kna1.
*append zstruct to zitab.
*endselect.
zstruct-zktokd = 'Sold-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Goods recipient'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
zstruct-zktokd = 'Bill-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Prospective Customer'.
append zstruct to zitab.
zstruct-zktokd = 'Competitor'.
append zstruct to zitab.
zstruct-zktokd = 'Sales partners'.
append zstruct to zitab.
zstruct-zktokd = 'Hierarchy Node'.
append zstruct to zitab.
zstruct-zktokd = 'Named List of Accounts'.
append zstruct to zitab.
zstruct-zktokd = 'Distribution center'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
handle1->bind_table( new_items = zitab ).
endmethod.
Please let me know if this is the best way to populate the node and then bind the table values from the node to the drop down box.
Thanks and Regards. -
How to get values from a multiple drop-down box.
On my first page, I have a multiple drop-down box as the following code.
<select name="selInterMethod" class="textbox" multiple>
<option selected value="CH">Chicago</option>
<option value="NY">New York</option>
<option value="SF">San Francisco</option>
</select>
On my second transaction page, I need to save "CH-NY" into my Database column: city if the user selected Chicago and New York.
How can I accomplish this in JSP?
Thanks for your help.I figured out the solution. Here it is. FYI
String inter_method = "";
String Inter_Method[]=request.getParameterValues("selInterMethod");
if( Inter_Method.length > 0 ) {
for (int i = 0; i < Inter_Method.length; i++) {
inter_method = inter_method + '-' +Inter_Method;
inter_method = inter_method.substring(1,inter_method.length());
System.out.println("trx inter_method = " + inter_method); -
How to show the selected item in a drop-down box......
hi,
i m using the following code for selecting from the drop-down box...
<html:select property="lddate" style="width:160">
<html:options collection="load_dt" name="AlmCurrencyRiskAnalysisBO" property="load_dt" labelProperty="load_dt"/>
</html:select>
but what happng when i m select any date from the dropdown box it does not show that date. it only shows the last entry date in the load_dt arraylist.
i m trying to implement this on a jsp page..can anyone plz tell me what shuld i do to show selected date...plzz help..its vry urgent.........Vini,
He seems to be using Struts not ADF Faces.
Seems, you have given list to to property and labelProperty, Can you re-check these properties?
Sireesha -
How to get th selected value of a Drop Down Box
hi,
i have a drop down box with two items. each item contains a text and a value.
i tried to get the actual value of a dropdown box but i get the value of the first item.
in the change event of a dropdown box i entered the following code:
app.alert(this.boundItem("text of an item"));
this messagebox shows everytime the value of fist item in my drop down box.
any idea?
thanksMake sure you use xfa.event.change to get the correct value from the change event on the drop-down listbox
I have the following
xfa.host.messageBox("Data Value is " + this.boundItem(xfa.event.change));
on the change event (javascript) of a dropdown list box and it returns me the correct value -
How can we get a value in a drop down box without refreshing the page
In my application i am having 14 drop down boxes. On selcting a particular value in a drop down box i am doing its corresponding functionality. I would like to get these values without refreshing the page each and every time i select a text box, Is it possible to get these values without refreshing the page each and every time.
RaghuThere is a new hype going on called AJAX. It is either that, or dumping a lot of information in javascript arrays and reading the information from there when you make selections. I would choose AJAX.
-
How to create a drop down box and text box in screen painter?
Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
land1 TYPE t005t-land1,
natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
FROM t005t
INTO TABLE i_t005t
WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
w_natio-key = i_t005t-land1.
w_natio-text = i_t005t-natio.
APPEND w_natio TO i_natio.
CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
values = i_natio
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
mark type c , "This is to select the record.
matnr like mara-matnr ,
matkl like mara-matkl,
maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O -
Fetching values from database into a drop down box
in my JSP page there are 3 drop down boxes for date of birth......
what i need is i want to get the values from database into that drop down box when i access the JSP page.......
session is there....'m getting all other values.......
I will attach the JSP page.....
Please help me...........
Thanks in Advance......
<%@ taglib uri='/WEB-INF/taglib/struts-bean.tld' prefix='bean'%>
<%@ taglib uri='/WEB-INF/taglib/struts-logic.tld' prefix='logic'%>
<%@ taglib uri='/WEB-INF/taglib/dyna.tld' prefix='dyna'%>
<%@ taglib uri='/WEB-INF/taglib/struts-html.tld' prefix='html'%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title><bean:message key="page_title"/></title>
<link href="<bean:message key="context"/>/CSS/default.css" rel="stylesheet" type="text/css" />
<script src="<bean:message key="context"/>/js/AC_RunActiveContent.js" type="text/javascript"></script>
<link href="<bean:message key="context"/>/CSS/screen.css" rel="stylesheet" type="text/css" />
</head>
<body>
<%!
Membership mShip = null;
%>
<script language="javascript" >
function checkDate(Form){
var d;
d = Form.year.value+"-"+Form.month.value+"-"+Form.day.value;
alert("Date is:"+d);
Form.dob.value = d;
</script>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>
<jsp:include flush="true" page="../templates/header.jsp"/> </td>
</tr>
<tr>
<td class="menuTD">
<jsp:include flush="true" page="../templates/menu.jsp"/> </td>
</tr>
<tr>
<td class="sub_menuTR"> </td>
</tr>
<tr>
<td><table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td class="column" valign="top" width="170"><jsp:include flush="true" page="../templates/left_panel.jsp"/></td>
<td valign="top" align="left">
<dyna:message error="error" warning="warning" message="message"/>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="80%" valign="top" align="left">
<%
if(session != null){
mShip = (Membership)session.getAttribute("member");
%>
<form action="updateContactDetails.dy" method="post" name="form1">
<input type="hidden" name="m" value="<%=request.getParameter("m")%>" />
<table width="100%" border="0">
<tr>
<td>First Name</td>
<td><input name="first_name" type="text" id= "first_name" value = "<bean:write name = "member" property = "first_name" />" /></td>
</tr>
<tr>
<td>Last Name </td>
<td><input name="last_name" type="text" id="last_name" value = "<bean:write name = "member" property = "last_name" />" > </td>
</tr>
<tr>
<td>Address</td>
<td><input name="address1" type="text" id="address1" value = "<bean:write name = "member" property = "address1" />" ></td>
</tr>
<tr>
<td> </td>
<td><input name="address2" type="text" id="address2" value = "<bean:write name = "member" property = "address2" />" ></td>
</tr>
<tr>
<td>Suburb/City </td>
<td><input name="city" type="text" id="city" value= "<bean:write name = "member" property = "city" />" ></td>
</tr>
<tr>
<td>State/Territory</td>
<td><input type="text" name="state" value = "<bean:write name = "member" property = "state" />" ></td>
</tr>
<tr>
<td>Postcode</td>
<td><input type="text" name="postcode" value = "<bean:write name = "member" property = "postcode" />" ></td>
</tr>
<tr>
<td>Contact Phone</td>
<td><input type="text" name="home_phone" value = "<bean:write name = "member" property = "home_phone" />" ></td>
</tr>
<tr>
<td>Mobile</td>
<td><input type="text" name="mobile" value = "<bean:write name = "member" property = "mobile" />" ></td>
</tr>
<tr>
<td>Date of birth</td>
<td nowrap="nowrap"><select name="day">
<option>Day</option>
<option value="01">1</option>
<option value="02">2</option>
<option value="03">3</option>
<option value="04">4</option>
<option value="05">5</option>
<option value="06">6</option>
<option value="07">7</option>
<option value="08">8</option>
<option value="09">9</option>
<option value="10">10</option>
<option value="11">11</option>
<option value="12">12</option>
<option value="13">13</option>
<option value="14">14</option>
<option value="15">15</option>
<option value="16">16</option>
<option value="17">17</option>
<option value="18">18</option>
<option value="19">19</option>
<option value="20">20</option>
<option value="21">21</option>
<option value="22">22</option>
<option value="23">23</option>
<option value="24">24</option>
<option value="25">25</option>
<option value="26">26</option>
<option value="27">27</option>
<option value="28">28</option>
<option value="29">29</option>
<option value="30">30</option>
<option value="31">31</option>
</select>
<select name="month">
<option>Month</option>
<option value="01">January</option>
<option value="02">February</option>
<option value="03">March</option>
<option value="04">April</option>
<option value="05">May</option>
<option value="06">June</option>
<option value="07">July</option>
<option value="08">August</option>
<option value="09">September</option>
<option value="10">October</option>
<option value="11">November</option>
<option value="12">Decembber</option>
</select>
<select name="year" onChange = "checkDate(this.form);" >
<option>Year</option>
<option value="1957">1957</option>
<option value="1956">1956</option>
<option value="1955">1955</option>
<option value="1954">1954</option>
<option value="1955">1955</option>
<option value="1956">1956</option>
<option value="1957">1957</option>
<option value="1958">1958</option>
<option value="1959">1959</option>
<option value="1960">1960</option>
<option value="1961">1961</option>
<option value="1962">1962</option>
<option value="1963">1963</option>
<option value="1964">1964</option>
<option value="1965">1965</option>
<option value="1966">1966</option>
<option value="1967">1967</option>
<option value="1968">1968</option>
<option value="1969">1969</option>
<option value="1970">1970</option>
<option value="1971">1971</option>
<option value="1972">1972</option>
<option value="1973">1973</option>
<option value="1974">1974</option>
<option value="1975">1975</option>
<option value="1976">1976</option>
<option value="1977">1977</option>
<option value="1978">1978</option>
<option value="1979">1979</option>
<option value="1980">1980</option>
<option value="1981">1981</option>
<option value="1982">1982</option>
<option value="1983">1983</option>
<option value="1984">1984</option>
<option value="1985">1985</option>
<option value="1986">1986</option>
<option value="1987">1987</option>
<option value="1988">1988</option>
<option value="1989">1989</option>
<option value="1990">1990</option>
<option value="1991">1991</option>
<option value="1992">1992</option>
<option value="1993">1993</option>
<option value="1994">1994</option>
<option value="1995">1995</option>
<option value="1996">1996</option>
<option value="1997">1997</option>
<option value="1998">1998</option>
<option value="1999">1999</option>
<option value="2000">2000</option>
<option value="2001">2001</option>
<option value="2002">2002</option>
<option value="2003">2003</option>
<option value="2004">2004</option>
<option value="2005">2005</option>
<option value="2006">2006</option>
<option value="2007">2007</option>
</select ></td></tr>
<tr>
<td><input type="hidden" name = "dob" /> </td>
<td nowrap="nowrap"><input type="submit" value="Submit" /></td>
</tr>
</table>
</form>
</td>
<td width="40"></td>
<td width="200" valign="top">
<div id="headlines">
<jsp:include flush="true" page="../templates/profile.jsp"/>
</div>
</td>
</tr>
</table>
</td>
<td> </td>
</tr>
</table></td>
</tr>
<tr>
<td><jsp:include flush="true" page="../templates/footer.jsp"/></td>
</tr>
</table>
</body>
</html>i think normally u will get data from databsae as objects.they are like java beans having getter and setter methods.so you create a collection of those objects like collect all the objects coming from database into an arraylist or....
suppose you want to populate the dropdown box with say "username" from database object s, your code will look like that
<html:select property="name">
<html:options collection="databaseList" property="username" />
</html:select>
"databaseList" is collection(say.. ArrayList) of objects you are getting from database.this dropdown will contain all the "usernames" you are getting from database. -
How to create a drop down box values on design time?
Hello,
I have a drop down box that I would like to edit on design time to have the valus 1 to 10.
Is it possible to doo it on design it or do I have to create a loop in the code to do that?See go to LocalDictionary->Data Type-> SimpleType Right Click and create a Simple Type giving some Package Name
Once u have created
There u will see Enumeration Tab and give Key Value Pairs by pressing New Button
Now Create a Context Attr and at Type property select that three dots
Then go to Dictionary Simple Type and select the Package u have given
then select the Simple type u have created
Then assign the context Attr to the UI Element
Message was edited by: krish kanth -
How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address
Hello,
Try Mail>Preferences>Accounts icon>Account Information tab>Click on the Outgoing SMTP server drop down, choose edit Server list, highlight the old one & click Remove.
(Such convolution is worthy of Windows® in my estimation)
Maybe you are looking for
-
I ordered Illustrator via creative cloud for another user. I received an invitation that was accepted and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the
-
File to Mail Scenario - Need help
Hi all, I am trying a simple file to mail scenario in which i am using following data types . Source datatype - Scr_File_DT -- Root Material_no Plant Target datatype - Tgt_Mail_DT --Content In the message mapping i am concatenating material_no and pl
-
I play virtual city.. Now I get a message: Warning you're running low on disk space
i play virtual city playground. now i get a message: Warning you're running low space
-
Why can't Weblogic 12c find Managed Bean by annotation,which in a jar?
the detail: why can't Weblogic 12c find Managed Bean by annotation,which in a jar?
-
Hi, I'm just?playing with?my new Zen V Plus player, and I cannot figure how to delete "empty" preset places on radio tuner section - it's frustrating to have more empty places than (favorite) radio stations?Thank you for your help...