WebDynpro Error:- Can't determine SDM host

Hi SDN,
I have installed the NWDS on my local machine..after that I have created a sample WebDynpro Application as given in one pdf...but when i run that application, i m getting the following error:-
Feb 22, 2008 10:55:44 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
I have not install anything other than j2sdk1.4.2_12...I am new to WebDynpro..pls suggest me wht I have to install on my local m/c...& also pls provide me the documents for the same..I think I require SDM on my m/c...
pls help.

Dear All,
You are not getting my point...
I recentlly got one laptop..in which i have SAP logon pad, NetWeaver Developer Studio & j2sdk 1.4 version...then I tried developing a portal component on our portal using WebDynpro...after that when I created a WebDynpro Application & tried to deploy that at that time I got the error msg that SDM is not available...
So I just have NWDS & java installed on my m/c...what other softwares I need for SDM to work? Do I need SAP netWeaver 7.0 complete installation on my m/c??
Pls help.

Similar Messages

Deployment exception : Cannot determine sdm host (is empty). error

Hi all,
i have installed the NW2004 s sneek preview. Trying to deploy a web dynpro application. Yesterday i was able to.
Today The deployment fails with the message
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
1) I am able to log on to SDM.
2) Can see SDM as running in sapmmc
2) the J2EE engine in the SAP netweaver developer studio shows SDM as green color
With parameters
state Running
Productive use No
Debug Off
Is there any problem with SDM. I have found quite a number of threads but knon could solve the problem. The problem looks more so complciated since I was able to deploy yesterday but am unable to today.
Appreciate any help
regards
Sam

Make sure that your NWDS has the j2ee engine linked to it. Under windows->preference->SAP j2ee engine.
If it is configured here, then you should be good. If it is still not working, try to reboot the j2ee engine and try again.
REgards,
Rich Heilman

Cannot determine sdm host

Hi,
I'm developiny webdynpro application usin NetWeaver Developer studio. While I deploy the error below appaers in log.
How can I solve?
Thanks.
Sep 16, 2008 12:49:52 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[006]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !

Hi,
Go to window ---> preferences
You will get a window opened in that
on the left hand side you have the SAP J2EE Engine option
double click on that
if you are using a server which is situated remotely then go for 1st option
Mesassage Server Host:--<Ip of the server>
Meassage Server Port :<port no>(Generally 3901)
If you have server installde locally on your system then go for the 2nd option
ther will be a browse you acn dind ur server and select that.
Thanks & Regards,
Lokesh

How can i find SDM port , Message server port, Message server name?

Hi All,
I am tring to deploy a ear file from NWDS.
I am trying to congigure through
Windows>Preferences>SAP J2EE engine -- Remote.
I have these questions.
1. How can i find Message server Host?
2. How can i find Message server Port?
3. How can i find SDM port?
4. What is the difference betweent the Message server port and SDM port? Both are same or can be different?
5. What are the ways to deploy a ear file on remote J2EE engine ?
6.Can I run SDM from a remote mechine and connect to the server?
7. When i am trying to deploy a ear file i am getting
"Cannot determine sdm host (is empty)" what is the possible reason.
(Here i used information from /usr/sap/GXI/DVEBMGS00/j2ee/cluster/instance.properties for server host and port number)
Thank you
Ganges Leaves

Hi Ganges~
Please check this link~
Deployment Problem
Could not start SDM Server
SDM setting the target system for j2ee engine
"No route to host" - SDM
SDM Error
Can not deploy. sdm host is empty
Hope this helps,
regards,
moorthy

Error message "No business area can be determined for item 000010"

Hi all,
I had maintained business area assignements.
However, while creating a sales order, the following error message appears : "No business area can be determined for item 000010"
What does it mean ? And how can I fix this problem ?
Regards,
Bahia.
Edited by: Bahia M. on Nov 13, 2008 11:58 AM

Dear Bahia,
Please go to IMG path assign the business area
IMG>Enterprise structure>Assignment>Sales and Distribution>Business Area Account Assignment-->Define Rules By Sales Area(Roule 1)
-->Assign Business Area To Plant And Division
I hope this will help you,
Regards,
Murali.

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Hi the_mad_movies,
It seems like this article will be the best option for addressing this issue:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

how to fix the error message itunes can't sync apps because it can't determine what apps are installed

Hi,
This may be Helpful
AMDS for Windows
http://support.apple.com/kb/TS1567

Error: can't fetch data for this host - too few bytes supplied by RPC

Hi,
In our internal Lab we have:
One Admin, Media,Client Server (we can make backups for himself) - Solaris 10 with DDS4 tape drive (lab)
One Windows Client (we can make backups) - Windows XP
One Linux Client - CentOS 5.1
When we add the linux client with the command:
mkhost -a ob --inservice -r client -k 1024 linux
We receive this message in the linux (host) /usr/tmp/observiced.log
Error: can't fetch data for this host - too few bytes supplied by RPC partner (OB cached object manager)
And in the obtool we receive (forever looping)
Info: waiting for host to update certification status...
Can you help us with this linux client error ? (iptables and selinux disabled!!)
Thanks in Advance
Serpins

[SOLVED]
Selinux not well removed....
Thanks in Advance
Serpins

How can IC WebClient determine the host name for free seating?

Hi,
I want to determine the host name at CRM application server by ICI interface for free seating scenario.
There is a TCODE CRMM_IC_GFS to set 'Host Name Identification Applet'. But when I check on it, all buttions in IC Webclient disappeared. I followed the note 812399 to change Java security configuration, but the synptom still exist. Do anybody now how to? Thanks!
BR,
Hao

To run a public VPN server, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network.
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
4. Configure any firewall in use to pass this traffic.

Grid Control cannot determine primary host architecture

Dear all
i try to create new standby database for my oracle rac database (2 node) in grid control 10.2.0.2 but after first step of wizard i get this error without any oraerr number : "cannot determine primary host architecture" , but i have all database target items correct ,up and running include ( ASM,Listener,Cluster,Host,Agent,Database instance)
please help me how i can resolve this error
Oracle RAC version :10.2.0.1 (windows 2003 R2 X64)
Oracle Grid Control Agent ( 10.2.0.2 ) for windows X64
Oracle Grid Control 10.2.0.1 windows 2003 R2 32bit

Hi all,
I'm trying to create a stand by database with the same tools as described above. My configuration is the same.
I've checked in my database and I already got the value 'Intel Pentium' described in the query. I tried the query anyway but, as I was expecting, it didn't solve anything for me.
If somebody could explain a bit on what actually generate this error and what OMS is looking for in MGMT_TARGET_PROPERTIES, it would be great.
If I find anything I'll update this post.

SDM Host not defined or not found

Hello all,
I have recently installed the SAP Netweaver CE 7.1 SR5 and also the corresponding NWDS.
I have couple of question on the same.
1. i did not do any POST INSTALLATION CONFIGURATIONS. - can you please help me in that, usually like SLD and other things needs to be configured !!!
2. when i try to deploy my (VERY) simple webdunpro java application- the progress information shows SDM host not defined or not found error. but still the application completes and launches the url and gives not output !!!
Please help.

Hi,
You would need to run the initial configuration wizard to configure SLD:
http://help.sap.com/saphelp_nwce10/helpdata/en/45/a3c3f043cb0cf0e10000000a114a6b/content.htm
For second issue, please check thrad:
Config SDM with NWDS 7.1 Composition Environment SP03
Regards,
Srikishan

Async tcp client and server. How can I determine that the client or the server is no longer available?

Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;

Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1

I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
Having received the servers I had installed Oracle (ODI) product on it successfully.
Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
a) Modify /etc/ssh/sshd_config to comment the below line:
#Subsystem sftp /usr/libexec/openssh/sftp-server
b) Add below lines:
Subsystem sftp internal-sftp
Match Group sftponly
ChrootDirectory %h
X11Forwarding no
AllowTcpForwarding no
ForceCommand internal-sftp
Then lastly, Restart sshd services complete the configuration
# /etc/init.d/sshd restart
apssvrX server current details are as below:
apssvrX$ uname -a
Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrX$ ssh -V
OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
I tried the DISPLAY variable setup as well but to no use.
Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
apssvrZ$ uname -a
Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrZ$ ssh -V
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Please advise the way forward.

Tried but still same error.
Affected servers's sshd_config is as below:
[root@apssvrX]# cat /etc/ssh/sshd_config
# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
Protocol 2
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin without-password
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
## Commented the sftp jailing configuration
##Subsystem sftp internal-sftp
##Match Group sftponly
## ChrootDirectory %h
## X11Forwarding no
## AllowTcpForwarding no
## ForceCommand internal-sftp

How Can I Determine the Size of the 'My Documents' Folder for every user on a local machine using VBScript?

Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

How can I determine if my iMac is infected with Malware. Internet is very slow at times.

Some time ago I opened a link in an email from a friend and later found out that his email address had been hijacked. The site the link took me to seemed innocuous, but ever since it seems that from time to time that my internet connection is very slow, as if there is not enough band width. Is it possible that my computer is infected with some sort of malware? How can I determine that? If it is infected how can the malware be removed?

Here is the report.
Problem description:
I clicked on a link in a email from a hacked email account and since then my internet connection runs very slow at times. I am concerned that my iMac may be infected with some sort of Malware
EtreCheck version: 2.1.6 (109)
Report generated January 21, 2015 at 12:26:10 PM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Technical Specifications)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 1:8:36
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (398.65 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
PIONEER DVD-RW DVRTS09
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.symantec.kext.SymAPComm (12.7.1f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.filesecurity (12.7f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.fw (5.3.1f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.internetSecurity (5.4f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.ips (3.9.2f1 - SDK 10.8) [Support]
[loaded] com.symantec.kext.pf (5.7.1f4 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.symantec.errorreporter-periodicagent.plist [Support]
[loaded] com.symantec.nis.application.plist [Support]
[running] com.symantec.uiagent.application.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.fitbit.galileod.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[running] com.sec.faxdb.plist [Support]
[running] com.symantec.deepsight-extractor.plist [Support]
[loaded] com.symantec.errorreporter-periodic.plist [Support]
[loaded] com.symantec.liveupdate.daemon.ondemand.plist [Support]
[loaded] com.symantec.liveupdate.daemon.plist [Support]
[invalid?] com.symantec.MissedTasks.plist [Support]
[not loaded] com.symantec.nav.migrateqtf.plist [Support]
[invalid?] com.symantec.Sched501-1.plist [Support]
[running] com.symantec.sharedsettings.plist [Support]
[running] com.symantec.symdaemon.plist [Support]
[invalid?] com.symantec.symSchedDaemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.google.GoogleContactSyncAgent.plist [Support]
User Login Items: ℹ️
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Support]
GarminGpsControl: Version: 2.9.3.0 Release [Support]
NortonInternetSecurityBF: Version: 1.11.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Norton Internet Security [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Norton\nQuickMenu [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 100.60 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 1.00 TB
Total number of backups: 15
Oldest backup: 2013-08-01 22:49:49 +0000
Last backup: 2014-11-06 19:34:10 +0000
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 100.60 GB X 3)
Top Processes by CPU: ℹ️
      5% WindowServer
      1% Fitbit Connect Menubar Helper
      0% fontd
      0% AppleSpell
      0% launchservicesd
Top Processes by Memory: ℹ️
580 MB com.apple.dock.extra
322 MB SymDaemon
206 MB Google Chrome
168 MB spindump
155 MB mds_stores
Virtual Memory Information: ℹ️
7.46 GB Free RAM
2.59 GB Active RAM
1.51 GB Inactive RAM
1.05 GB Wired RAM
2.56 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 21, 2015, 11:23:52 AM /Library/Logs/DiagnosticReports/rpcsvchost_2015-01-21-112352_[redacted].cpu_res ource.diag [Details]
Jan 21, 2015, 11:18:14 AM Self test - passed

WebDynpro Error:- Can't determine SDM host

Similar Messages

Maybe you are looking for