Webdynpro error - what happened calling the webdynpropage was terminated ..

Hello,
in WD-Application rendering by portal browsing with Firefox clicking a button it appears a popup.
The same WD-Application rendering by portal  browsing with IE 6.0 clicking a button it appears not popup but a browser error-message
"webdynpro error - what happened calling the webdynpropage was terminated due to an error.
Error type: sapPopupMainIdX1"
Where is the probem.
We use Portal Netweaver 2004s, SP11 and as backendystsem for WD for Abap Netweaver 2004s, SP 09.
Best regards
Oliver Prodinger

The issue was actually caused by a kernel problem, as described in the topic
SAP NetWeaver 2004s ABAP Trial Version SP8 Troubleshooting Guide
I applied the recommended bug fixes and now it works perfectly!
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37">SAP NetWeaver 2004s ABAP Trial Version SP8 Troubleshooting Guide</a>
Hope It will solve your problem
Cheers
Parag

Similar Messages

  • HT1688 My phone turned off while i was texting. I not sure what happened because the battery was at 72%. I tried turning it on but nothing happened.

    MY phone turned off while texting battery at 72%. I tried turning it on but screen stays black.

    First, try to reset the phone by pressing the sleep and home button for about 10sec, until the Apple logo comes back. You will not lose data by resetting.
    If this does not work, connect in recovery mode, explained here:
    iOS: Unable to update or restore

  • What happened to the thumbnail photo in an event?  Previously all I had to do was to drag the thumbnail photo to a folder, now I need to drag each individual photo to that folder.  If that means a few or several, it's a hassle. Any help for this one?

    What happened to the thumbnail photos for an event?  Previously when I wanted to transfer an event to a specific folder all I needed to do was drag the thumbnail.  If there were multiple events, I only needed to pick the one I wanted and drag it.  Simple and it worked very well.  If there was an event with several, I only neede to drag the one thumbnail and it was done.  Now I need to drag each individual photo to the new folder.  Sometimes that could mean 10, 20 or more. Doing one at a time is can be a very slow process.  If there are events that need to be split, it can be even slower.  Any positive ideas will be greatly appreciated.

    You need to follow iPhoto terms since we only know what you tell us
    what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
    The basic default view of photo is by event (iPhoto '08 and later)
    Exactly what you you trying to do?
    LN

  • HT4623 What happened to the itunes radio tab? It was there yesterday and this morning Genius has replaced it's position.

    What happened to the itunes radio tab? It was working yesterday and this morning it has disappeared.

    JimHdk wrote:
    The bookshelf is history. Skeuomorphism is dead.
    Thank the stars! I'd really had enough of it.

  • What happened to the illustration window that was on the bottom left part?

    What happened to the illustration window that was on the bottom left part of previous versions?
    We were also able to choose between the illustration of the selected track and the illustration of the listened track.

    Look on the last line where it used to be and hit the arrow icon.

  • What happened to the T4i? Seems like it was here then gone...didn't seem to last very long.

    What happened to the T4i? Seems like it was here then gone...didn't seem to last very long. Did it have major problems?

    "How do you like your 7D?"
    Westy,
    In my opinion the 7D is the 'best buy' in a professional level DSLR out there. The pro level featuers are many and the downsides are few.
    If you couple the Canon 7D with the Sigma APO 50-150mm f/2.8 II EX DC HSM, you truly do have a fantastic set-up at the most value considered, reasonable, price.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • TS3694 What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

    What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

    Thank you for your response. However, I have done that plenty of times and each time I try to restore my phone, it extracts the software and then when it says restoring with the loading bar, an error message comes up saying an unknown error has occurred.

  • I just bought the 20g iCloud storage yesterday but I thought it was to bump the total upto 25g! I wonder what happen to the 5 free for?

    I just bought the 20g iCloud storage yesterday but I thought it was to bump the total upto 25g! I wonder what happen to the 5 free for?

    The new plans are based on total storage so the 5GB is no longer an addition.  Presumably the price reflects the fact that you get 5GB free.

  • My iphone 5s got stolen and the option to erase data after 10 tries was not enabled. What happens after the incorrect password is input after 10 times?

    my iphone 5s got stolen and the option to erase data after 10 tries was not enabled. What happens after the incorrect password is input after 10 times?

    After the sixth erroneous passcode entry a delay is imposed that increases exponentially and eventually reaches over 40 years before another attempt can be made.
    No one yet knows how long the next delay is.

  • What Happened 2 the Call Monitor

    Hello Other Sykpe Users-- What happened 2 the call monitor that used 2 let U know exactly how much credit U have left while U R talking.  With the new system, I have been cut off 3 times without any warning--I don't like the new system.  Do I have a choice so that I can use the call monitor???   Please help with this subject.  I could not find any such question on the public board.  Thanks for UR help.   JCP

    Hello Claudius--thank U for this suggestion.  I am aware of auto credit; however, I found the previous model much more useful 2 me than the current one.  Unfortunately, my relatives do not have access 2 SKYPE & therefore, I have 2 call their cellphones.  I even tried a subscription, but with that method, if U use up UR credit U have 2 wait until 30 days has passed 2 renew the sub-scription.  In the meantime, U have 2 pay full price 2 get as-U-go credit.  All this dilema could B solved if SKYPE would just return 2 the previous format.  Perhaps this post will encourage other users 2 start a thread requesting that SKYPE reverse this part of the new format.  Again, thanks 4 UR suggestion--at least I found out that I do understand how the system works.  I just don't like the current format; therefore, I will revert 2 using calling cards which R much cheaper as long as I use the full amount all at once.  JCP

  • I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone I need to enable. Thanks.

    Question
    I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone and I think I need to enable. I can't log on to Citibank to pay my bills using Firefox or Safari for that matter. Citibank says cookies must be enabled to access their on-line bank. I wonder if this is the problem...cookies that is?

    Yes, I found the cookies, and thanks for taking the time to help out. I called Citibank. They told me that they will not support Firefox or Safari for Mac because our user group is too small for them and the expense too high. The person that I spoke to said in the past, Firefox has worked with Citi, but that was just by accident. At the moment they have no plans to help Mac people using the latest OS log onto their website or enable programs like my Quicken or Mint.com to access. They don't work anymore either. I think all the problems happened after the last OS update.

  • ISE - What happens when the on-boarded certificate expires?

    I'm trying to design a good BYOD deployment model but have a few questions that need direct answers.  I have down how to go about on-boarding and getting a certificate on a device, the ISE provides great flow for this to happen in many ways.  My questions come from a design perspective before and after the BYOD deployment is completed.
    1. Figuring out a method to validate the device is a Corporate asset or a BYOD asset.
         (I don't want to install a certificate on just any device, or perhaps I do but I need to give permissions to all resources if its a Corporate Device, and more resitrictions if it's BYOD, so how do I figure this out during the provisioning phase?)
         a. Use MDM (May not have one, or if you do we are still waiting on ISE 1.2 for that integration)
         b. Build a Group for provisioning admins, if user PEAP-MSCHAPv2 account is from this group install a certificate. (issue here is that the end user looses administration of the device in the my device portal as the device is now registered to the provisioning admin)
         c. Pre-populate MAC into ISE as all Corporate devices should be provisioned by I.T. before they go to the end user (I think this is good but can see push back from customers as they don't want to add more time to the process)
         d. Certs on any IOS or Android device, provide access based on user group and do not worry if device is Company asset or not (I believe that this is the easiest solution and seems to be what I find in the guides)
         e. Other options I have not thought about, would love input from the crowd
    2. What happens to the device once the Certificate expires?
         (I don't know the answer to this, my thought would be the user or device will fail during the authentication policy and this creates a mess)
         a. Tell the user to delete the profile so they can start all over again (creates help desk calls and frustrated users)
         b. Use MDM for Cert management (may not have one)
         c. Perhaps the client uses SCEP to renew based on the cert template renew policy and there are no issues (this is me wishing)
    Would appreciate some feed back and would like to know if anyone has run into these issues.                   

    Neno,
    Sorry but I don't have any other info on using a public CA, Cisco says to use internal CA's for PKI.  I think the best practice in 1.2 comes out will be to use one interface for Web Management and a different interface for Radius, profiling, posture, and on boarding.  This way you can use your private CA for EAP and a public CA for web traffic.  Have you tried a public CA bound to management and a private CA for EAP yet?
    I did do a session on EAP-TEAP, they explained how it will work and also discussed EAP-FASTv2.  EAP-FASTv2 is available now but you must use anyconnect as your supplicant.  Microsoft and all other vendors will have EAP-TEAP native once it is fully released and comissioned as it will be the new gold standard for EAP.  It will support TLS, MD5, and CHAPv2.  If you are interested I have the PDF of the presentation I attended that shows the flow of how EAP-TEAP will work.  This is much better than wasMachineAuthenticated and machine auth caching, which has many down falls.
    I currently do machine and user auth I just don't require them.  If Machine auth then allow machine on vlan-x with access to AD, DNS, and blah blah.  Then a seperate rule to say user auth gets more access, although I require EAP-TLS for both and if you think about it you are accomplishing the same thing if your PKI is setup correctly.  Make it so users and machines can only auto enroll, that way you know the only way they got their cert was from GPO policy.  I won't go into anymore detail, but there is lots you can do.

  • Pipeline functions - what happens under the hood?  (10g)

    Hi all,
    What happens when you call a pipelined function? (As opposed to a plain table-valued function.)
    From what I understand, a pipelined function will return rows as they are needed. Let's say I have a really silly example of a pipelined function,
    CREATE OR REPLACE PACKAGE BODY TEST_PACKAGE_1
    AS
        FUNCTION GET_DATA RETURN JUST_A_TABLE PIPELINED
        IS
        BEGIN
            PIPE ROW (JUST_A_TYPE('HELLO'));
            PIPE ROW (JUST_A_TYPE('WORLD'));
            RETURN;
        END;
    END TEST_PACKAGE_1;
    /Then let's say I were to SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM = 1, what happens to the second row? Does the code that returns the second row still get educated? (Obviously it's omitted from the query, but does it still get generated somewhere and just go nowhere?)
    If I have a cursor on a PL/SQL block that selects from GET_DATA, will each row only be returned as the cursor references it? In that case, what happens to the rows that don't get selected? If there some resource that need to be closed out (say, just before the return statement), would it still be safe to close it out?
    Thanks!
    Don

    Interesting question, lets try a simple test and see we'll just take your example function and toss in a few dbms_output statements like so:
    CREATE OR REPLACE PACKAGE BODY TEST_PACKAGE_1
    AS
        FUNCTION GET_DATA RETURN JUST_A_TABLE PIPELINED
        IS   
        BEGIN
            dbms_output.put_line('ONE');
            PIPE ROW (JUST_A_TYPE('HELLO'));       
            dbms_output.put_line('TWO');
            PIPE ROW (JUST_A_TYPE('WORLD'));       
            dbms_output.put_line('THREE');
            RETURN;   
        END;
    END TEST_PACKAGE_1;Now not forgetting to enable dbms_output call it three times like so:
    SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM = 1;
    SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM <= 2;
    SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM <= 3;What I saw from my test was that with the first call I got 1 row of data from the pipelined function and only the first dbms_output statement was processed. For the second statement I got 2 rows of data from the function and the first two dbms_output statements were processed. For the final call I again got 2 rows of data from the function and all 3 dbms_output statements were processed.
    My environment:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    "CORE     10.2.0.1.0     Production"
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production

  • GetTransaction().validate();  - what happens if the Insert fails?

    Hi forum members,
    I am rookie in terms of development with ADF/Jdeveloper and I've got an error which I've traced to the following piece of code
    am.getTransaction().validate();
    am.getTransaction().postChanges();
    DBSequence newAdId = (DBSequence)newAssociatedDocument.getAttribute("AdId");
    int adId = newAdId.getSequenceNumber().intValue();
    return adId;
    "am" as you'd guess is an ApplicationModule
    The return value of "adId" is -1.
    The "ADID" in the database is controlled by a Pre-Insert Database trigger which fills it with a Primary Key value.
    Now, it sounds like the Insert of the Row fails somewhere and hence the "adID" is -1 as I've read that in Metalink. Like, DBSequence initially populates it with "-1" and then fills it (if the transaction is successful) with the actual ADID value that was inserted into the database (behind the scenes using the RETURNING INTO clause).
    But my question is How to Trap the Oracle Database Error that happens behind the scenes? Like it looks like the postChanges() is actually successful (no Exception raised, else it would have been cascaded back) and we actually get a "-1" returned to the Caller.
    Would I be able to do an Oracle Trace and detect the Oracle error?
    Thanks
    Ravi

    It is very important to backup your iPad before you prceed with update.
    Backup and Restore
    http://support.apple.com/kb/ht1766

  • A module reported an error 0x80004005 from call back which was running as part of rule

    Hi 
    a module reported an error 0x80004005 from call back which was running as part of rule. with event id 4503this error shown since delta monitor is enable!thanks

    Hi,
    What is your SCOM version, would you please try to install the newest update, and check the result.
    And here is a similar thread, please refer to it:
    http://social.technet.microsoft.com/Forums/en-US/28516ca3-ae97-49a2-bb72-d6814750813f/scom-warnings-and-errors-event-id-4503-10703-1103-and-10102?forum=exchangesvradminlegacy
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for