Webdynpro exceuting problame`

when i develop small webdynpro java application, when run from that application
giving this error message please
help me
http://172.17.3.70:50000/webdynpro/dispatcher/local/hrpersonclaims/ClaimsApp?
Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.

Hi VSNl,
Ur link is not working.Can you please give the stack trace & send the details,what exactly u r doing in ur application?
regards
Sumit

Similar Messages

Webdynpro abap application attached to SWFVISU is tested from se80

hi,
when webdynpro ABAP application is attached to workitem in SWFVISU the the workitem id is passed via url when calling the application. (though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
[link1|http://forums.sdn.sap.com/thread.jspa?threadID=1209159]
[link2|http://forums.sdn.sap.com/thread.jspa?threadID=226957]
[link3|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6?QuickLink=index&overridelayout=true]
I am running this application from se80 - application - right click - test. (this is required to troubleshoot one of the issues.)
at this time it does not ask for workitem id and directly runs the application . It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id. the status of this workitem is complete in the system.
thanks
bhakti

Hi-
(though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
It is required to have a parameter WI_ID (as an Application parameter) in your WDA. And via this Application parameter WDA will receive the workitem id, when the task is exceuted from UWL (provided configuration is done in swfvisu)
Could you confirm, there is no Application parameter (WI_ID) in your WDA?
It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id
If you defined WI_ID in Application parameter and there is an option to provide value and it seems, you have defined some value over there or other way might be in your method (inbound plug), you may gave default value to WI_ID in the parameter
If your application is working properly from UWL and for testing purpose, you could put a breakpoint and change the workitem id, when executing from se80
Vinoth

Launch webdynpro component from a assignment block

Hi,
I am trying to launch a webdynpro component on click of a hyperlink from a assignment block.
This works fine but, on click of hyper link i set a global attribute GV_url = 'X'.
based on this, i call the webdynpro link in the .htm page of the view.
<%
if ZL_BT116IT__BSPWDCOMPONEN_IMPL=>gv_url is not initial.
%>
<a href="<%= ZL_BT116IT__BSPWDCOMPONEN_IMPL=>gv_url %>" target="_blank"> Sample URL to launch Web Dynpro Application</a>
<%
clear: ZL_BT116IT__BSPWDCOMPONEN_IMPL=>gv_url.
endif.
%>
using this i get an additional hyperlink in the assignment block which on click gets the webdynpro page.
This is an additionaluser click which is not required.
How can we skip this , instead directly navigate on click of the attribute in the assignment block?

have solved this using the script window.open
<%
if ZL_BT116IT__BSPWDCOMPONEN_IMPL=>gv_url is not initial.
%>
window.open("<%= ZL_BT116IT__BSPWDCOMPONEN_IMPL=>gv_url %>).focus();
<%
clear: ZL_BT116IT__BSPWDCOMPONEN_IMPL=>gv_url.
endif.
%>
This helped me open the link directly but have a new problem with this.
I am able to navigate to the link in a new window only the first time i click the hyperlink.
once i close the new window and if i try to click the hyperlink again, i am not able to open this again.
Have tried to debug but, everything is in place.
Pointers on this scripting would be very helpful.
Should i clear the link before exceuting again or do any additional scripting?.

SAP Webdynpro ABAP Application Caching Issues

Hi All,
We have developed custom applications using Webdynpro - ABAP, using FPM and accessing those applications through SAP Netweaver Portal 7.0. I have deactivated all the caching techniquies in Portal @ iview level and Page level, Portal Runtime and ContentFetch side, But still causing the same problem.
I have a doubt, wether this is happening because of SAP Logon Caching @ SAP WAS system level. I have checked the SSO parameter settings in RZ10 Profile parameters. Our basis people have set both accept and create parameter value = 1. Is this causing issue?
Or Is there any other settings which is required to do in Portal or SAP system level. Please let us know , really appreciate your value suggestions and help.
Please find the below links, which im referring to...
http://help.sap.com/saphelp_nwmobile71/helpdata/en/d2/91553b4d53273de10000000a114084/frameset.htm
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/48/69eb40e8a607d6e10000000a42189c/content.htm
Thanks in Advance
PRadeep

Hi-
(though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
It is required to have a parameter WI_ID (as an Application parameter) in your WDA. And via this Application parameter WDA will receive the workitem id, when the task is exceuted from UWL (provided configuration is done in swfvisu)
Could you confirm, there is no Application parameter (WI_ID) in your WDA?
It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id
If you defined WI_ID in Application parameter and there is an option to provide value and it seems, you have defined some value over there or other way might be in your method (inbound plug), you may gave default value to WI_ID in the parameter
If your application is working properly from UWL and for testing purpose, you could put a breakpoint and change the workitem id, when executing from se80
Vinoth

Where I can get SAP standard webdynpro application source code

Dear Experts,
Where can i get sap standard WebDynpro application source code, because i need to copy that source code and modify that according to my application.
My scnario.
Actually i need to develop Carloan WebDynpro application, but its similar ESS-> Travel Expenses->Plan my Travel Expense .. standard WebDynpro application model, so please any one suggest how to copy that source code means where can i get that source code, and when rebuilding time what type of problems facing..
please anyone suggest
appreciate if you help regarding this..

Hai saradha ji,
thank got i know you are the right person for solve my problame, because i study your blogs, please don't be leave this thred till the my problame solve,
ok once i find sca file what i want do steps.. please tell me..
give me any document step by step. i don't have FPM. i don't have market place ID, so i unable to download .
please send related artical this mail id [email protected]
first i search sca file in my development server once got file.. let you inform.
sincerely

Logical Database in Webdynpro

Hello,
I have a program in R/3 that is based on a logical database. I don't want to have to write the program all over again in Webdynpro.
Is there a way to use the logical database in Webdynpro for ABAP.

Basically WDA calls a FM and then the following help is a good starting point:
"Calling a Logical Database Using a Function Module"
http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
Kindly close the thread and award appropriate a points to the answer given.
Sergio

Filename in Webdynpro for a PDF created with Smartform

Hi,
I created a PDF with Smartform in my Webdynpro-Application.
When I click the save button there is a default filename f.pdf .
How can I change the filename?
Regards
Marcus Schug

Hi Experts,
any update on this?
I am facing the same problem with ESS payslip (smartform/Hrform): my customer wants to have custom file name for download salery statements from the portal. Do you know how to change the default form name unknown.pdf to e.g.. "payslip_month_year"?
I spent a lot of time to find any possibility to get and change the file name but without success till now.
Please respond.
Regards,
Zdzislaw Kaczmarczyk
Edited by: Zdzislaw Kaczmarczyk on Jun 14, 2010 4:41 PM

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

Hiding a subview called in a main view in WEBDYNPRO Application

Hello Experts,
I have a scenario in which i am calling a subview inside a main view. I have created a main view in which:-
1. List of reportee to the manager logged in is getting displayed in the form of a table.
2. When we select any row of this table ( means selection of any reportee row) and click on a button 'Get Details', then it should display the detailed personal data of that reportee.
I have successfully called an already created personal data view inside this main view to display the detailed personal data of any selected reportee. But the issue is in the main view:-
1. This view has table containing the list of reportee getting displayed.
2. This view simultaneously also displays the default first row detailed data of the table of reportee.
Our requirement is:-
1. To display only table containing the list of reportee in the first load of main view.
2. Then when any row of this table is selected, then only the detailed data specific to that row should be displayed.
My approach till now is:-
1. I have removed the default first row lead selection for the table of reportee.
2. I have created a node VISIBILITY_DET_DATA and then an attribute IS_VISI BLE under that node of type WDUI_VISIBILITY.
3. In the layout section i have created a group GROUP_DETAIL_DATA and a view container UI element under that to call the detailed data view when any row of table containing the list of reportee is selected.
4. I have created a binding for the VISIBLE property of the group GROUP_DETAIL_DATA to the attribute IS_VISI BLE created in the context of the component contoller.
5. I have then used the method WDDOINIT of the main view to write code to hide the detailed data view by setting the IS_VISIBLE flag to '02' i.e. NONE.
But this is causing the entire view to be coming as blank view.
I am not sure why this is happening, Can any of you suggest if i am missing anything important which is cauing this analomy.
Rupesh

Hi ,
This is a Webdynpro related question. you would have got many repsonses if you posted in webdynpro forum.
i) I would want to know how to hide Image object or the transparent container which holds the IMAGE object, dynamically through the code inside the MODIFYVIEW method of the view
You can do a post_exit enhancement in the MODIFYVIEW method. Get the UI element object from view and There are methods to set the visibility at runtime.
Is there an option to dynamically specify diffent image based on the login language with the IMage container?
i think yes, same procedure as first question's answer. Based on condition you can change the source path of the mime object .

How to create a calender view in webdynpro java EP 7.0

Hi ,
I want to create a calender view in webdynpro,
Requirments are
1. it should be current month view
2. Below each day i want to show office in-time and out-time in two cloumns(these values will be coming tru RFCs).
ie
1
10am | 4pm
Is this possible in webdynpro java EP 7.0 ?
Please help me
Thanks
Kumar

Hi Kumar,
If you are using EP7.0, there is no calendar UI element in webdynpro development. There is only date navigator UI element. This is demonstrated in the below article.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059344a-1930-2d10-6e8a-dcec5f94993e?quicklink=index&overridelayout=true
Regards,
Ganesh N

WebDynpro Error while creating a Purchase Order in SRM 7.0

Hello Friends,
I need help.
We are on SRM 7.0 with support pack 8.0 and we are getting the below error wile clicking on Shopping cart or Purchase Order link in Portal.
Any idea on how to resolve this error.
Thanks
Jyothi.
http://sapsrm.erpcx.com:8000/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
ASSERTION_FAILED
The ASSERT condition was violated.
Method: ADD_EVENT_TO_QUEUE of program CL_FPM========================CP
Method: IF_FPM~RAISE_EVENT of program CL_FPM========================CP
Method: SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_COMPONENTCONTROLLER~SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_V_PRSEL~RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP

Here is what I see:
Error analysis |
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_FPM========================CP" or "CL_FPM========================CM004"
"ADD_EVENT_TO_QUEUE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
|

Error while Look up session bean (EJB 3.0) in WebDynpro

hi ,
             I want to look up session bean inside webdynpro. I hv written following code inside init of component controller. but not able to look up session bean
try{
               InitialContext context = new InitialContext();
               ApplicationFetcherLocal applicationFetcherLocal = null;
             applicationFetcherLocal = (ApplicationFetcherLocal)context.lookup((ApplicationFetcherLocal.class.getName());
          catch (Exception ex){
               System.err.println("LookUp Failed\n\n"+ex.getMessage());

Have you read my latest reply in your other [thread|session bean look up across DCs in EJB3.0;?
What's the value of asking the same question again if you don't care about the answer?
Regards,
-- Vladimir

Problem while deploying a webdynpro java application in NWDS 7.1 version

HI All,
        I got the below error when i deploying the webdynpro java application in NWDS 7.1 version..help me out...........................................
Exception:
com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=[Ecc]
NameNotFoundException.The SAP J2EE ENGINE service 'tcbldeploy_controller' is not available
because of deployment or down engine( service ).
Reason: Object not found in lookup of
tcbldeploy_controller.
     at
com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl
.java:64)
     at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:118)
Caused by: com.sap.engine.services.dc.api.ConnectionException: [ERROR CODE DPL.DCAPI.1118]
NameNotFoundException.The SAP J2EE ENGINE service 'tcbldeploy_controller' is not available
because of deployment or down engine( service ).
Reason: Object not found in lookup of
tcbldeploy_controller.
     at
com.sap.engine.services.dc.api.session.impl.SessionImpl.createCM(SessionImpl.java:320)
     at
com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.<init>(DeployProcessorImpl.ja
va:136)
     at
com.sap.engine.services.dc.api.deploy.impl.DeployProcessorFactoryImpl.createDeployProcessor(
DeployProcessorFactoryImpl.java:26)
     at
com.sap.engine.services.dc.api.impl.ComponentManagerImpl.getDeployProcessor(ComponentManager
Impl.java:46)
     at
com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl
.java:58)
     ... 1 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object
not found in lookup of tcbldeploy_controller.
     at
com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)
     at
com.sap.engine.services.jndi.implserver.ServerContextRedirectableImpl.lookup(ServerContextRe
directableImpl.java:80)
     at
com.sap.engine.services.jndi.implserver.ServerContextImplp4_Skel.dispatch(ServerContextImplp
4_Skel.java:555)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
     at
com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136
     at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.pro
cess(ApplicationSessionMessageListener.java:33)
     at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

First check is Java stack is running ?
make sure J2EE_ADMIN user not locked.
Ans please check password in secure area. check password in secure store should be correct.
may be you can try with restart of SAP and DB.
All the best
regards
nag

Error while deploying a webdynpro application

Hi,
Iam getting an error while deploying the application in nwds the error is like this
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to get deployable object part info for component com.labprocess.LabProcess1
what is the remedy for this and due to what reason it is displaying. plz reply me ASAP.
Regards,
Shilpa.N
Edited by: pasumarthi shilpa on Apr 17, 2008 7:01 AM

Hi,
Iam having one doubt regarding ECATT in case of this at front end any changes we need to make is it necessary.....
actually ECATT means recording the nwds applications at backend browser when we click on start recording it will start recording and what ever values we r entering at front end we can view from backend... Plz suggest me ASAP.... waiting for u r response........
Regards,
Shilpa.N

Webdynpro exceuting problame`

Similar Messages

Maybe you are looking for