Webdynpro for ABAP - Popup apearing for userid and pwd

Hi Experts,
We have implemented ESS and gone live. Now we have created one custom application in webdynpro for ABAP and attached with portal.
Initially there was a problem, the application was not getting executed because of system configuration, then I have configured the host name, port number correctly. Then the iView is getting loaded in the portal.
The problem is, when I am trying to access the iView, the popup apearing for the user id and password. This is happening only the webdynpro abap application, this is not happening for all sap standard iViews.
Could anyone help me with this issue?
Thanks
Jay

Hi Jayanthi,
as you had mentioned this is not happening for sap standard iViews(do you mean simple transaction iViews for which you have used a system alias, which was the same you had used for ABAP web dynpro iview)?
Of courese ESS iViews works with their own JCOs which is no way helpful or connected with wd ABAP.
So I believe if your SAP id and Portal id are different(or if they are same but SAP Logon ticket is not configured properly) then only it woudl ask for the authentication again- for Wd ABAP to work fine, only the connector property and WAS to tbe configured in the system object(aka system alias) used for ABAP iview. Now once you enter the login credentials, it is working fine right, then could you please test the user mapping under the user you are logged in, select the alias that you had used while creating the abap wd iView and provide userid/password here, then run the wd ABAP application, it definitely would work.
N.B: if you had provided the credentials once, then it woud be stored in the browser cache, so if you perform the user mapping in user admin, log off from portal, close all your browser windows, then clear cache,(cookies etc). then login to portal, run the wdABAP application, I am sure this would work(it worked for me!!!).
Thanks,
Jakes.

Similar Messages

Webdynpro for ABAP vs WD for Java

How different is WD for ABAP from WD for Java?
I have a good knowledge of WD for Java and I know ABAP. But how good and efficient is WD for ABAP? Would it be better to use WD for ABAP or WD for Java for SAP based portal development?
Thanks in advance,
Reena


1. We can embedd the Web Dynpro for ABAP applications in SAP screens in ABAP environment. I don't think it is possible using java web dynpro.

Yes, you probably can, since the application can be fired simply by a URL, there is not reason that you couldn't have an HTML control in your dynpro and point to this URL.
To answer the original question, the development model for each is pretty much the same, just two different flavors. I think that some things make WDA better, one being that it is totally integrated into the ABAP development workbench and the Transport/change control system. On the WDJ side, you development locally and "deploy" your changes using the DTR and CBS. I'm not exactly comfortable with this quite yet, which is why I like WDA better..
Another thing is that we have some built in stuff with WDA, like automatic search help functionality, ALV Grid, and Select-option functionality. I do believe that SAP is working on some of these for WDJ.
Regards,
Rich Heilman

Asking userid and pwd only in inbox(ESS)..!

HI all,
I am getting a strange error,
Am using ep 6.0 ,r/3 4.7 , ess 50.4
when i click ess -> inbox -> am getting the mails which have been submitted by employees, but once i click "execute" button, then its asking me for r/3 user id and password. We have done usermapping also but still its asking only when we click 'execute' button.
For other services such as 'who's who', 'personal information' its not asking for userid and pwd.
Please can any one tell me wat is the problem.
The error is in production server , so its very critical.. pls help me resolve this issue at the earliest..
Will be eagerly waiting for your positive response.
Thanks & Regards,
Mahesh.M.R

Hi sameer,
No.But we have narrow down the search that, if we open run our bsp application in IE (not thru portal) , for the first time it's asking SAPuserid and password.It's fine.
In systems with Microsoft office2000, the foll are the scenarios...
i navigate thru set of pages, there it's not asking userid and password.It's fine.
when i click file download button,the file is getting open in url.
In systems with Microsoft office2003, the foll are the scenarios...
i navigate thru set of pages, there it's not asking userid and password.It's fine.
when i click file download button,there is a windows popup box saying, do u want to open/save/cancel the file.
*When i click save the file,it's getting saved properly.
*when i click open....here the problem starts.....
'it's asking for sapid and password again.
and file getting opened if i click ok/cancel button.
How to avoid the second time Login prompt?
Rgds,
Jothi.P

Asking userid and pwd in Inbox ( ESS )

HI all,
I am getting a strange error,
Am using ep 6.0 ,r/3 4.7 , ess 50.4
when i click ess -> inbox -> am getting the mails which have been submitted by employees, but once i click "execute" button, then its asking me for r/3 user id and password. We have done usermapping also but still its asking only when we click 'execute' button.
For other services such as 'who's who', 'personal information' its not asking for userid and pwd.
Please can any one tell me wat is the problem.
The error is in production server , so its very critical.. pls help me resolve this issue at the earliest..
Will be eagerly waiting for your positive response.
Thanks & Regards,
Mahesh.M.R

I don't recommend adding it as a query string parameter, but here is the URL:
http://localhost:8080/psc/hlbhrdev/EMPLOYEE/HRMS/c/ADMINISTER_WORKFORCE_(USF).EE_HR_PROC.USF?userid=VP1&pwd=VP1
The recommended approach would be to use a POST instead of a GET, which would put the username and password into the body of the request instead of the URL of the request.

SAP Webdynpro for ABAP - IXOS Integration for storing documents

Hi
We have a requirement to attach documents to a web based SAP custom application and store as attachments simialr to GOS fucntionality in SAPGUI. SAP web based application is developed using web dynpro for ABAP. Atatched documents are to be stored externally in IXOS system. I am looking for fucntion modules or BAPI's that integrate SAP webdynpro for ABAP and IXOS. Requirement is below
1)     From SAP Webdynpro for ABAP application read a file form desktop and store on external IXOS system.
2)     Retrieve a file from IXOS system and display in SAP Web Dynpro for ABAP application
3)     Delete a file on IXOS system from Web Dynpro for ABAP application
Thank You

You are on right track thinking about enhancement framework.
My approach is would be in the following order.
Personalization/customization
Enhancement
Modification

Shortcut keys or Hotkeys for ABAP UI Elements for Navigation

Can we create shortcut keys or hotkeys for ABAP UI elements on an ABAP screen where the user can directly navigate to a particular UI element?
E.g.: Screen containing 5 tabs where the user can directly navigate to a specific tab.

Hi Margaret.,
If u post this thread in web dynpro ABAP forum then u may get some use ful help..!! As per my concern., whatever u like go for tat, which will give u more work satisfaction., pls go through this link and post it there.,
[Web DynPro ABAP Forum|Web Dynpro ABAP;
Thanks & Regards
Kiran

WebDynpro for ABAP F4-help for KAGRU like PERFORM f4_groups in KSB1

Hello,
I must realize a search-help in a WebDynpro-Component which looks like the F4-help in the transaction KSB1 for field KAGRU.
In the report RKAEP000 it looks like this.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR koagr.
PERFORM f4_groups USING    'KSTAR'
                             gs_tka01-ktopl
                    CHANGING koagr.
But in WebDynpro the Function   'K_GROUP_SELECT' wil generate a short dump.
Has anybody an idea, how to make this in WebDynpro?
Greetings

How are you trying to use the search help? You can set up value help in the component itself. Go to the component controller context of your web dynpro component. Select the context node attribute for which you would like to have value help. Now go down to the properties. Next to "Input Help Mode" select "Automatic". If your node attributes were brought in from a table (SAP or custom), then if there is an existing search help it will automatically be brought up now next to "Determined Input Help". Save your changes and activate.
If a search help is not brought in when you change the input help mode to automatic, then you can still create your own method to provide the search help. In this case you will need to create your method in the controller of the view where the user will be entering a value for the field. The method type should be "Method". Make sure to call your search help method within the method WDDOINIT of the view. In the search help method you will need to navigate to your mode, select the values for the field, and then set the attribute value set using those values. You will have to look into K_GROUP_SELECT to see where it is getting the values for KAGRU. I don't think you can call K_GROUP_SELECT directly because it creates a pop-up.
A third option is to use an OVS (object value selector) component. Please see this document for help with OVS:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cf40cf90-0201-0010-4a85-e5a207b900d8
I hope this helps.
- April King

For abap-hr i need datatype and length for the fields which i selected

hi seniors,
      I got one task for which i have to get the data type and length for the fields of a table in abap-hr. I am using dd03l table, but my team leader told me to not to use this. So, please anybody can help, i will be thankfull.
      I have to select PA30 fields in which pernr and choic, subty and whatever i have selected the infotypes fields. If there is any function module to find data type and length or else any other table.
thanks,
sekhar.

Hi,
Try using the Function Module "DDIF_FIELDINFO_GET". You can use this for fetching the complete details of a structure or, a specific field.
Input:->
TABNAME        PA0001
FIELDNAME     PERNR
Output:->
Check the DFIES_TAB it will contain all the details you need for the specific field.
Sample--->
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
    TABNAME              = 'PA0001'
*   FIELDNAME            = ' '
*   LANGU                = SY-LANGU
*   LFIELDNAME           = ' '
*   ALL_TYPES            = ' '
*   GROUP_NAMES          = ' '
*   UCLEN                =
*   DO_NOT_WRITE         = ' '
* IMPORTING
*   X030L_WA             =
*   DDOBJTYPE            =
*   DFIES_WA             =
*   LINES_DESCR          =
TABLES
   DFIES_TAB            = MY_DFIES_TAB
*   FIXED_VALUES         =
* EXCEPTIONS
*   NOT_FOUND            = 1
*   INTERNAL_ERROR       = 2
*   OTHERS               = 3.
Hope this was of some help.
Best regards,
Sagar.

Use Variant for abap in Sapgui for Java 7.00r2 (Mac)

Hi,
When i want to use a, already existing, Variant for a program i get the error message 'Choose a valid entry'.
This also happens whith a newly stored variant.
The Mac version also has problems with the enter key in SE38.
Seems to me the are new bugs in revision 2.
John

Hello,
both bugs are fixed in rev 2.1, which I made available just few minutes ago. see ANN: SAP GUI for Java 7.00 rev 2.1 available for download
Best regards
Rolf-Martin

Iphone 5 starts to flicker just before the UserID and Pwd dialog appear

Is it a software problem or hardware ? If it is hardware, then I would take it to Apple store. Please advice.

I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

How to integrate WebDynpro for ABAP application with SAPEnterprisePortal7.0

Hi WebDynpro for ABAP Experts,
We developed an WebDynpro for ABAP application on R/3, and now we are planning to show this as an iview on SAP Portal EP7.0 (SAP j2EE Engine--Java stack). is it possible to integrate this application with portal?
If so can you proviode me the way how can we achieve this?
ADV Thanks
Regards
Phani

Hi Alex,
Thanks for your response.
I already created the system object R/3 Backend.
Actually some WebDynpro java applications/iViews are currently running on Portal. and the developers developed these in NWDS and deployed the .sca files on the Portal server and we created Webdynpro for java iViews.
but now the requirement is creation of webDynpro for ABAP views.
The developers developed WebDynpro for ABAP on the R/3 system. So what are the parameter values we need to give at teh time of creation of WebDynpro for ABAP iview like the Namespace, Application name etc which are mandatory values and how the Portal server detects the application, this means no need to deploy the application on the Portal server?
Shall we need to maintain any JCo Destinations or not?
Pl share your ideas.
ADV Thanks
Regards
Phani

How can we benefit from WebDynpro for ABAP over Normal ABAP

Dear Guru's,
Please guide me what are +Ves of WebDynpro over Normal ABAP. Once all Applications are developed how can we organize them. For Example In SD module there is sequence of Tcodes to be executed this is true for all modules . Is there any concept involved in this new technology.
For What purpose we can suggest someone to implement in an Organization.
Many Thanks in Advance.
Regards
Ram

Hi Ram,
Here Are some comparisions I made w.r.t Webdynpro for ABAP (also some benifits over Java):
1     "Pros:it will be easier to move your development project through the system landscape if both the UI and business logic are in the same development environment.(Update: This is is less of a concern now that CTS+ lets you bundle your WD Java UI developement with ABAP development objects into a single transport, with SPS13. )
2     tons of custom ABAP business logic is easier to access via WD for ABAP
3     WD for ABAP has a code wizard, so easy to build
4     SAP List Viewer and ALV handled better
5      The biggest thing is the NWDI. Most of the SAP customer have ABAP stack, but not everyone has the Java stack. To develop WD Java you need to set up the NWDI envrionment, like SLD, CMS, CBS, DTR, etc. which is a huge effort if you don't have them in place. While for WD ABAP, the environemnt is normally there as given for most of customers if they have the right version.
6     If your business is in SAP system, I would prefer WD ABAP. There are many WD components available in WD ABAP like select-option, Alv table, F4-help which are not available in WD Java. Beside in WD ABAP you can deal the context node in form of internal table which is much more performant than dealing with the contextelement which is the case for WD Java.
Regards,
Tanaya
Edited by: Tanaya A on Dec 10, 2009 6:19 PM

How to create a proxy object for MOSS integration via WebDynpro For ABAP

Hello all,
I have a question about the creation of an ABAP proxy class in SE80.
When i follow this link:
[https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6066fbe8-edc4-2910-9584-a9601649747d&overridelayout=true]
i see on page 7 that there is: a tab under create called Enterprise Service/ Web Service with under this tab a tab called proxy object.
When i do this in my SE80 i only see Enterprise Service and not proxy object.
Screenshot
[http://picasaweb.google.be/panneels.robin/SAPScreens#5377623235095894546]
Is there a extra configuration or add-on needed to do this action? Or is there a work-arround for this?
Because we need this for abap web dynpro for communication with MOSS.
Thanks in advance for all your help.
With kind regards,
Robin Panneels

Hi James,
If you like to use SAP web dispatcher as a solution for load balancing portal application, you no need to create system object under systems..
You have to install web dispatcher as separate instance where you need to configure portal apps into it..
Configure web dispatcher like to hit the admin port, use http://<webdisp-server>:<adminport>/sap/admin
For normal portal access, use http://<friendly URL>/irj/portal
The good news is that the webdispatcher knows that the portal supports SSL
Another advantage of this config, is the webdisp, will just replace the apache redirect server. Users will access mycompany.com, without any port number, since we are redirecting 80 to the backend j2ee. Also, https should work like in the normal world.
Profile will be like below...
SAPSYSTEMNAME = WEB
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
Message Server Parameters ##########
NOTE: The "ms/http_port" must match the profile on the Central Instance
rdisp/mshost = <FQDN of portal CI Host>
ms/http_port = <Ms port of portal>
SAP Web Dispatcher Ports
#icm/server_port_0 = PROT=HTTP,PORT=81$$
icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=3600, EXTBIND=1 (some OS will not allow to bind ports <1024)
Admin port details
icm/server_port_1 = PROT=HTTP,PORT=3200
#, EXTBIND=1
icm/HTTP/admin_0 =
PREFIX=/sap/admin,DOCROOT=./admin,PORT=3200,AUTHFILE=/usr/sap/WEB/SYS/global/security/data/icmauth.txt
SSL
icm/HTTP/redirect_0 = PREFIX=/ , TO=http://<friendly URL name>/irj/portal
WebAS Message Server Parameters
rdisp/TRACE = 1
icm/trace_secured_data = 1
Regards
Suresh

ESS framework in web dynpro for ABAP?

Recently, I need to start an ESS project using web dynpro for ABAP. Unlike web dynpro for java, we have ESS framework in every track, like pcui/xx DCs and ess/per DCs in the track. And as there are existed projects in the DCs like ESS/JP/ADDRESS, we can just follow suit.
My question is: are there ESS frameworks in web dynpro for ABAP? Or existed ESS projects based on web dynpro for abap?
Thanks for your help!

Hi,
As far as i know, it would need really a huge amount of effort to develop ess on Webdynpro for ABAP. As you know that it is not a part of SAP standard delivery, you really have to start it from the scratch.
It would be a custom developed application.
Regards,
Sharadha

Install JAVA add-in for ABAP problem.

Hello.
I tried to install java Add-in for ABAP on SAP NetWeaver 7.0 Support Release3.
(OS : AIX 5.3 , database : DB2)
The installation of phase "Central Service Instance (SCS) Java Add-in" and "Database instance Java Add-in" is complete
But in the last phase "Central Instance Java Add-in"
It show error
"TYPE=A STATE= INFO_SHORT=IO EXCEPTION:
Unexpected end of file from server:: CONFIGURATION="
at step "Configure System Landscape Directory".
(I read it from /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB6/CENTRAL/CI/java.log)
I checked the Environment variable for Java and is set correctly.
I stoped the instance and restart the server ,Then tried to re-install but the same error still appear.
Any idea?
Thanks.
Regards.
- Chai -

Thanks for your reply.
I have clear all remain shared memory after stop instance and database.
But it still show the same error.
sapinst_dev.log:
ERROR 2009-05-25 13:45:33.277 [sixxcstepexecute.cpp:951]
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key
|NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|1
3|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|
0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS:
See output of logfile java.log: 'IO EXCEPTION: Unexpected end of file from
server:: '.).
TRACE 2009-05-25 13:45:33.323 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service
SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In
for ABAP > IBM DB2 for Linux, UNIX, and Windows > Central System > Central Instance
Java Add-In ( Last error reported by the step :Java EE Engine configuratio
n error. DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION:
Unexpected end of file from server:: '.). You may now <ul> <li> choose Retry t
o repeat the current step. </li> <li> choose View Log to get more information
about the error. </li> <li> stop the task and continue with it later. </
li> </ul> Log files are written to /db2/sourceSAP/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB6/CENTRAL/CI.
 </body></html>
TRACE 2009-05-25 13:45:33.323 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
sapinst.log :
ERROR 2009-05-25 13:45:32.830
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log:
'IO EXCEPTION: Unexpected end of file from server:: '.
java.log:
TYPE=A STATE= INFO_SHORT=IO EXCEPTION:
Unexpected end of file from server:: CONFIGURATION=
log from Log Browser
ERROR 2009-05-25 13:45:32.830
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Unexpected end of file from server:: '.
Please help.
Regards,
- Chai -
Edited by: ChaiChai2 on May 25, 2009 9:21 AM
Edited by: ChaiChai2 on May 25, 2009 9:22 AM
Edited by: ChaiChai2 on May 25, 2009 9:23 AM

Webdynpro for ABAP - Popup apearing for userid and pwd

Similar Messages

Maybe you are looking for