Webdynpro for integrating with BI/BW

Hi Experts
I have a requirement that we need to display BI/BW reports on our microsoft sharepoint by Webdynpro c where can i find examples on how to intergrate BI/BW reports in and Webdynpro
thanks
points will awarded

Hi,
check this forum thread.
Integrating BW Report in a Web Dynpro Application
Also check below document regarding BI in WDA
http://help.sap.com/saphelp_nw04s/helpdata/en/80/268841a79f1609e10000000a155106/frameset.htm
Thanks
Suman

Similar Messages

BSP vs Webdynpro for integrating with BI/BW

Hi Experts
I have a requirement that we need to display BI/BW reports on our microsoft sharepoint by either
BSP or Webdynpro could u please advice me which is the best route to go and where can i find
examples on how to intergrate BI/BSP reports in BSP and Webdynpro
thanks
points will awarded

Webdynpro is latest when compared to BSP.
Check this link
http://****************/Tutorials/WebDynproABAP/WebDynproABAPMain.htm
Regards
MD

Best Third party Fax Server for integration with SOA

Hi
Which is the best third party fax server for integration with SOA ??
I am having requirement to configure Fax for client..
Edited by: 910947 on Feb 16, 2012 4:12 AM

i am having following option
Using Java API like InterFAX
or
Using Fax Server like SilentFax or RightFax
or
Using Virtual Fax Server like GreenFax or myfax
Which is the best solution, i should go for that will best fit with my SOA Suite???

CRM Open Interface Tables for Integrating with CRM

HI all, We are evaluating integration with CRM from Telco Billing system. The TRMs of CRM talk about using some published open Interface table in CRM. I could not find any TRM or User manual where I can get this info.
Also need to know API for CRM for intregation. PL. reply to [email protected] . Thanks - Pradip

I think you also need V14496-01 Part 1 of 2 and V14496-01 Part 2 of 2 (English Language Extension Packs).
Installation is explained in the Bookshelf: V29095-01

The new features avilable in webdynpro for abap with EHP5

Hi,
Currently our ECC 6.0 is upgraded with EHP5 from EHP3.
Could anyboy tell me the new featues available in webdynpro for abap for this EHP5. If i develop WDA objects in EHP3 environment and transport it to new system with EHP5 . What would be the problems i encounter. kindly suggest me..
thanks,
Raghu

I would expect in any case that there is no problem when you transport WDA build from ehp3 to ehp5 (Backward compatibility ).

What is best practice for integration with freight forwarders?

Hello,
We are looking into the possibilities for automatically exchanging data with one of our freight forwarders. We will send them our shipment information and they will send back shipment status and date information including some additional information like the house bill. Sending the shipment data from our SAP (ECC 6) system is no issue, we have done that before. What is new to us is receiving back the status updates from the forwarder. Is there a kind of best practice of where to store this information on the shipment (or in a separate tabel) and what standard function module or BADI to use for this?
We are using ECC 6.0 sales and distribution, but no transportation management or SCM modules.
Would, like to hear the experiences of people who have done this type of intergration with their forwarders.
Regards,
Ed

SAP have added SAP TM 8.10 as a separate package which is also integrated with R/3 which means, a separate server is required if SAP TM needs to be implemented which will take care of your expectations. For more information on this, search in Google so that you will get couple of documentations on this topic.
G. Lakshmipathi

MM Configuration for integration with SAP SNC

Hi,
I need to make MM configuration required to support PO collaboration and SMI process integrating with SAP SNC.
ANy kind of information would be very much helpdull
Thanks
Vikas

Hi Vikas,
MM configuration for PO collaboration is depend upon the your requirements. e.g. You want to upload the confirmations send by the supplier from SNC web UI to your R/3 system you have to use confirmation control key while creating PO in R/3 and make corresponding supplier confirmation control either optional or mandatory in SNC configuration. Default provided by SAP is optional.
Remember supplier can create confirmations only if ther either optional or mandatory.
Regards
Pravin

Is there a template for integrating with Twilio?

Is there a template that can be purchased for easily integrating with Twilio?

Unlike wordpress templates, BC templates don't touch the server, there is no serverside code included in a template that could interface with the REST or XML interfaces of Twilio.
With that said, you can build a middle man server that talks to both BC's API and Twilio's and get it all done. You would have to build it yourself or hire someone to build it for you (raises hand), price would depend on what you wanted to do.

Technical insight for integration with Remedy?!

Does anyone got technical insight of how IDM is integrated with Remedy? Does it use e.g. Remedy EIE?
Any details would be highly appriciated.
//L

you can set a http (exteranl ) break point inside the BAPI and then call the WS (the user executing and the client needs to be the same)

Documentation for Integrating with Peoplesoft

does anyone know where I can access the technical documentation our developers need in order to develop an integration with the Peoplesoft application? We have a client who currently uses PeopleSoft and they asked we integrate with PeopleSoft so they can send orders to us and receive results.

Unless you are familiar with PeopleSoft, I would think your client should guide you in this integration. PeopleSoft has various ways to communicate with the "outside" world and I can give you the link to the PeopleTools PeopleBooks (http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/psft_homepage.htm) but I highly doubt that will help you when you don't have any experience with PeopleSoft.
Easiest option with sending to an outside application and receiving results is, in my opinion, still a webservice. But then your client should do some work as well otherwise they will never be able to send anything at all. Direct link to documentation on PeopleTools 8.52 would be http://docs.oracle.com/cd/E41509_01/pt852pbh2/eng/psbooks/tibr/book.htm

Online Meet 15. Is XI mandatory or optional for integration with mySAP ERP?

no but if you use XI you can get a predefined set
(xi content) for the AII integration
so you get an out of the box scenario
Regards,
michal

hi,
If u want to call an RFC or so from an R3 system , then XI is the way to do it...
ERIC's words on the meeting were " XI is there for integration , so y not try and use it for ease.."
regards,
arul sekar.

Webdynpro application integration with Webservices

Hi,
I developed few webdynpro RFC model application like ATP check; outstanding etc .Now i want to make available this application on webservices for mobile integration .What is the methodology we should follow to reach this requirement?
Any helpful answer will be highly appreciated.
Thanks,
Kundan

>
Selvaraj Gyanaraj wrote:
> Hi shaan sharma ,
>
> The following are excellent websites containing PDF & PPT docs providing complete documentation of integrating WDA with EP:
>
> boldEight Options for Developing and Deploying Custom Portal Content
> http://www.sappro.com/downloads/OptionComparison.pdf
>
> SAPu2019sUI Strategy -How do SAP Enterprise Portal, Web Dynpro,NetWeaverDeveloper Studio, PDK, and Visual,Composer Come Together?-
> https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5303c390-0201-0010-e0b2-bfae018377f0
>
> SAP NetWeaver Portal Development Kits for .NET and Java
> https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0b3dcd1-0977-2910-a597-a82c639b07c7
>
> cheers!
> gyanaraj
Perhaps you should have a closer look at the links you provided. They don't have anything to do with WDA and Portal. The first one is a dead link. The second one is a 4 year old presentation on the Portal in general who's only mention of WDA is that it is "planned". Your third link is the PDF or .NET and Java and once again has absolutely nothing to do with WDA.

Want to install Siebel CRM in my PC for integrating with UCM.

I am very familiar with Oracle UCM and trying to integrate with Siebel CRM. I have UCM 11g installed in my PC with Oracle 11g DB and also I know the configuration process or steps from siebel end as well as UCM end. Now I want to install Siebel CRM for this integration.
I searched in orcale and found that I need the below softawres and also I downloaded it from e-delivery:
Oracle Base Application (V26510-01_1of2 and V26510-01_2of2)
Oracle Siebel Image creator(V26511-01)
Oracle DB11g: OracleXEUniv
RCU
What should I do now?
1. Is the above softwares enough for installation of Siebel ? If yes then can anyone please tell me the installation guide docs.
2. Should I require more softawre ?
3. I have also V26699-01_1of6 to V26699-01_6of6 setup files for siebel but I do not know whether I should install from these because I do not have any idea regarding this setup files.
Regards,
Santanu

I think you also need V14496-01 Part 1 of 2 and V14496-01 Part 2 of 2 (English Language Extension Packs).
Installation is explained in the Bookshelf: V29095-01

Webdynpro abap integration with interactive adobe forms

Hi Experts,
Am Facing problem printpreview adobe in portal and it developed by webdynpro abap interactive form there am getting warning message
Warning : This form is not supported with current verision of Acrobat or Adobe reader
Upgrade to Latest Verision For full Support.
And it is display half letters in print preview.
Regards,
Sakthi.

Dear Thomas,
Here there are two server one is developpment and quality.In development it is working fine and quality it is creating problem.If open in any system we are facing same problem.My dout is any server specific
adobe verision is in portal.
Thanks for Replying Good luck.
Regards,
Sakthivel.S

IFbA capabilities for integration with sap business workflow

Hi Everybody,
Here I have some questions concerning to IFbA needing your kind help ASAP:
1, Adobe compatibility with 46C
Any sample of solution on this, better with Business workflow running in 4.6C
2, Content management
How to manage a IFBA big file and attachment in workflow environment?
3, Portal integration
If IFBA could be integrated into IBM portal and how?
4, Partialy data input and authorization control
As to the IFbA used in a workflow，is it possible to set form properties and rights so that only permited users at some stage can see/change some specific fields. Here it should have some dynamic adaptability to different users, that is different users will have different experience to the same form.
Thanks in advance!
David

I would like to know as well about this, did you get an answer?
Thanks for any pointers.

Webdynpro for integrating with BI/BW

Similar Messages

Maybe you are looking for