WebDynpro Mobile - Table not rendered with PIE Client

Hello experts,
I want to create a WebDynpro Mobile application.
In this application I have a table which is bound to three Context Attributes with the type String.
In a standard browser, that table is displayed correctly. But when I am using the PIE Client, I just get a strange table-like "thing" with one column and row, without a header title and a radiobutton in the one table cell.
Does anybody have an idea what is going wrong here?
Thanks in advance
Felix

Refer this thread also. Similar question was earlier raised by me also..
Mobile WebDynpro Sample App Problem
Solution is at the last message of this thread.
Regards,
Gopal

Similar Messages

WebDynpro Abap table not rendered correctly inside portal iView

Hi,
I have a webDynpro Abap application with a table that contains radio buttons as table cell editors.
When I run the application directly it looks fine, but when I run it inside a portal iView the radio button allignment changes to the top of the table cell.
Please help.
Kind Regards,
Dirk Naude

I found that this could be fixed by changing the portal theme using the theme editor, specifically changing the table cell padding property.

LG mobile Phone not detected with USB cable!

What should i do?
My new LG KG810 Mobile does not Sync with my mac. are there some hacks available?

BitPim supports many LG phones but not the Chocolate.
Given the poor support for Macs in Mobile Phones you really need to buy a phone on the iSync list if you intend to use it as such.
mrtotes

Why CUA (Release 7.00) is Not Working with Old Clients(Release 4.6C, 4.5B)?

Hi all,
We have CUA (release 7.00) that is not working with older release clients. I implemented 2 release 7.00 clients to CUA; they both work fine. However, when I implement some older release clients (like, 4.5B, 4.6C, 6.20 and 6.40) to CUA, I can only create ID and pull out to client, but roles do not go through.
It is kind of argent.
Do anyone know how to fix it????
Thank you for reading this.

> It is kind of argent.
I think you meant "ardent"...
THe word u r g e n t is blocked by our content filters, because a while back everything was like that and these forums are actually discussion forums...
Anyway, sounds like faulty config or perhaps a problem with logical system assignment.
Have you checked that? Also check in SCUL?
That you can create users but not assign roles might also be that in the lower release systems they are checking activity 22 (assighn) AND 02 (change) to assign the role. Doesn't make sense, really....
Check the drop down menu in table PRGN_CUST for the option to change this, and compare whether the settings are different.
Cheers,
Julius
Edited by: Julius Bussche on Jul 30, 2009 11:34 PM

ADF FACES: af:table not rendering all columns

I'm using ADF EA 17 with myFaces 1.0.9 on JBoss 4.0.1/JVM 1.4.2_07-b05. The af:table is embedded within an af:panelgroup (being body of af:panelbox).
The af:table is not rendering all columns (only last 2 out of 8 cols total). The model behind the af:table is a java.util.List. Debugging shows that the list is filled up with beans correctly and that each of the properties of such a bean corresponding to a table column are also set correctly.
Strange thing is that sometimes all columns are rendered ok. Especially if i make heavy changes on the jsp (e.g. removing all but 2 cols from the af:table) and dropping it into the .../jboss/server/../tmp/deploy/tmpXYZ-exp.war directory. Restarting JBoss results in the old behaviour. Also closing browser and re-opening it yields to the missing columns again.
I've set breakpoints on the bean properties representing on table column and i can see, that the getter methods aren't called (all but those 2 that get rendered finally)
Table has multiselection enabled with 1 command button.
This happens with both IE 6 and Firefox 1.0.4; no oracle, myFaces exceptions visible on console or any log file.
Has anybody made same experiences so far or an idea what the problem really is ?
best regards,
Christoph.

I've tried it also with a plain af:table without any surrounding af:panelgroup or/and af:panelbox. Same result.
The bean holding the table-model (the java.util.List) is in session-scope. the table-model is update by an actionListener fetching values from an EJB. Could the session-scope be a problem ?
Potential candidates from my point of view, that might cause trouble here:
--) Caching (i've seen that sort of "CachedRenderers" are used
--) partial page rendering
--) multi-threading issue.
--) or any silly mistake of mine :-)
best regards,
Christoph

Provider is not compatible with the client

Hi,
I'm new to this forum so I don't know if this prob was already posted.
It might be something that i misunderstood.
My application VB.NET is connecting to Oracle 10g database.
Using client from the ODAC 10.2.0.2.21 installation file.
DB version is 10.2.0.1.0
Even before connection is open application throws an exception:
The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
Any ideas?
Thanks for help ;O)
Nice day to everybody.
Renata Belakova

Thanks
1, I'm developing an application on Win 2003 Server with Ora10g DB 10.2.0.1.0
2, I developed an application in VS.NET 2005, VB.NET
3, Application works OK on develop. PC
4, my PC name, IP and DB name are the same as customers
5, i published application and went to install it on customers PC
I was thinking about the same environment on developing and customer PCs.
then i went to customer to try application on their LAN
1, They have DB server with the same version of DB and the same name of DB and the same name of server as i got
2, firstly I've installed ora client on customer computer not server
I've used ODTwithODAC1020221.exe file and installed client part
3, set up listener on clients comp
4, installed .net application on this client comp
5, run and got exception i wrote in previous message
Im really not an Oracle professional. I'm a .NET developer but fist time in my life developing application under Oracle DB (mostly was using Microsoft SQL ...)
So I don't know if these steps were OK .... but it's what i've read.
Thanx ...

Tables not rendering correctly in Firefox

I recently switched from Dreamweaver 8 to CS4. I also
recently updated my Firefox to 3.06. I have had this website for
years, and it just started not rendering tables correctly in
Firefox. This is happening on multiple pages It works fine in IE.
http://www.wiw.uscourts.gov/bankruptcy/
Let me say up front, I know the page is antiquated (created
in Front Page) It uses tables for the layout instead of CSS. I hope
to be updating it soon, but for now I need a fix to get the pages
to work correctly.
Any help would be greatly appreciated!
Thanks,
Becky

Hello,
In the USBC CSS , delete this:
TD {
font-family : Arial, sans-serif;
float: right;
Take care,
Tim
"bhanson" <[email protected]> wrote in
message
news:gp3ups$l6j$[email protected]..
>I recently switched from Dreamweaver 8 to CS4. I also
recently updated my
> Firefox to 3.06. I have had this website for years, and
it just started
> not
> rendering tables correctly in Firefox. This is happening
on multiple pages
> It
> works fine in IE.
http://www.wiw.uscourts.gov/bankruptcy/
>
> Let me say up front, I know the page is antiquated
(created in Front Page)
> It
> uses tables for the layout instead of CSS. I hope to be
updating it soon,
> but
> for now I need a fix to get the pages to work correctly.
>
> Any help would be greatly appreciated!
>
> Thanks,
> Becky
>
>

ODM client not bundled with 11g client install?

All,
Our 10g Oracle Client install includes the Oracle Directory Manager.
We just installed the Administration version of the 11g client and I don't see ODM there.
Can someone verify that ODM is not bundled with the 11g client?
If it is bundled, how do I run it? The 11g Installer did not give me a menu item for it.
Thanks,
John

Ok... despite the overwhelming response on this forum I contacted Apple support to found the solution.
All mac's need internet access to send and receive the Apple Push Notifications. Even if the server is on the same network....
For those behind a firewall / proxy and not quite keen on letting clients have full access; all apple servers are on the 17.0.0.0/8 range.
For thosel looking to restrict even more (http://support.apple.com/kb/HT5302)
2195, 2196
TCP
Used by Profile Manager to send push notifications
5223
TCP
Used to maintain a persistent connection to APNs and receive push notifications
80/443
TCP
Provides access to the web interface for Profile Manager admin
1640
TCP
Enrollment access to the Certificate Authority
Kind regards,
Domien

Provider not compatible with Ora Client

Hi,
I just installed the Oracle DB 10G v. 10.2.0.1.0 and the ODP.NET v. 10.2.0.2.20 in my computer.
After I did that, I tested it and received the message: "the provider is not compatible with the version of oracle client". Do you know how to solve this issue? Which version of the Oracle Client or ODP should I install?
TIA

In your other post you mention OraOps10w.dll. That suggests that you developed on a machine with a version 10 client, and are now deploying to a machine with a version 9(.2) client. This won't work. Either install client version 10 on the deployment machine (best) , or install odp.net v9 on your development machine and rebuild.

Affect not rendered with AVCHD

I've had CS4 for a few days now. Running into problems. I have 1 clip in the timeline (AVCHD, MTS file). I added one effect (Auto Levels). When rendered using AME to H.264 the effect did not render with it. It will sort of flash once every 10 frames with the Auto Levels effect. I tried the same procedure with a SD avi file and it rendered Auto Levels fine. I am completely updated.

I can't tell you why it's not working, but I can tell you that it doesn't really matter as you're better off avoiding the use of any type of 'auto' effects anyway. Do what you need manually and it should work.

Windows Mobile 6 not syncing with Exchange Server / Error Code: 0x80072F06

Just got my Dopod 838 pro with Windows Mobile 6 installed. Having this problem when trying to sync with corp. Exchange server:
The ActiveSync circle on the phone turns yellow/brown, clicking the Error message it says:
The Security Certificate on the server is invalid, please contact Exchange Server Admin or ISP, to install valid certificate on the server.
Support / Error Code: 0x80072F06
That's the problem. My phone doesn't have a Data Link connection problem as I am able to go online with it, also the company's Exchange Server is good, a few days ago I used my Windows Mobile 5 to sync with it without a problem. (but then I lost the phone)
Can some one help? Thanks.

Can u help me here?
I have a windows 6 mobile devices (all) that are having an issue connecting to my exchange server. I am pretty useful with certs but this one is baffling me. I have a windows 2003 sbs server. I recently created a san cer on the server and since then my Windows devices cannot synch. I belive I have setup correctly, or not?? Ther error and the steps are below...
ERROR ON DEVICE:
The security certificate on the server is not valid.Contact your exchange server administrator or ISP to install a valid certificate on the server:
support code: 0x80072f06
STEPS I USED TO CREATE SAN:
1. Created certificate using article http://support.microsoft.com/kb/931351/en-us
I added the following as SN: MAIL.EXTERNAL.COM (my external dns record for mail server)
And added the following for SAN: SERVER01 (my mail server name )
SERVER01.INTERNAL.LOCAL (my mail server fqdn)
2. Exported Root CA cert and imported to my phone
3. configured active synch to connect to mail.external.com on 443
I believe these are the correct steps. I would liked to have been able to export the SAN cert from IIS with private key and install on phone but the webserver template doesnt allow you to export private keys. I also cannot create a dubplicate webserver template to allow the export of the private key as you need enterprise edition of windows 2003 to do this.
So I am at the end of line I tried exporting the cert without the privtate key and importing it but still keep getting samer error.
Why of Why does it not like my cert?
I have just noticed now when I browse to the same address for OWA externally I am getting the error on my browser too even though I have the cert installed on my laptop
Celtic

"Next" and "Previous" functionality on UIX tables not working with 10g

With new release of JDeveloper(10G), the "Next" and "Previous" navigation buttons/links on UIX tables are not working. I tried different approaches:
1. It does not work with Data Controls built from Java Beans or from TopLink.
2. I tried without using Data Controls and it still does not work.
I shows "Next" and "Previous" buttons on the page. But it shows all records on the page rather then showing limited records. Say for example if the block size is 5 and total number of records are 15, it shows all 15 records in the table but the "next" and "Previouds" button would say "1-5 of 15".
Did any of you observe the same behaviour?

Hi Shital -
Thanks for the additional info...
When I said that the total number of records is 15, I
meant that my tableData's DataObjectList contains 15
entries. (In case of DataControls you don't even use
DataObjectList, but for my non data control
applications I used DataObjectList). You are saying
that If I want to display only 5 records per page
then I will need to provide a DataObjectList with
five items. Then for next five records from 6-10 I
will have to program in such a way that my method
call returns 6-10 records.That's correct. In the case where you are explicitly providing data to the table via a DataObjectList, you need to feed the data to the table in page size blocks - and you also need to handle the table's goto event to scroll the table to the next/previous block of data.
In previous version of
UIX(2.1.7) I never had to program for next and
previous buttons. UIX tables used to take care of
that. That's why I am so surprised.It sounds like you must have been using the <bc4j:table> component. Is that the case?
Getting back to your original issue...
1. It does not work with Data Controls built
from Java Beans or from TopLink.I believe that this is a bug in the preview release - and I'm fairly sure this will be addressed by production. In production, ADF should automatically handle wiring up table scrolling for you when binding your table to a data control - whether the data control is implemented via JavaBeans, Toplink, or BC4J. I believe that in the preview release, scrolling only working when binding to a BC4J data control.
Andy

SQL developer not installed with the client software

Hi All,
OS: Windows
Clinet: 11g 64 bit
I have installed oracle client for windows 64 bit, as we know with client installation the sql developer also comes with. But in my case, I am able to find every other component but sql developer.
I am thninking of downloading the same from Oracle site, is there a alternate way for the same?
Regards,
Sphinx

What, exactly, did you install?
Did you install the Instant Client? Or did you do a full client install? If you did a full client install, which option did you pick during the installation process-- Administrator, Runtime, or Custom? If you did a full client install that didn't include SQL Developer, you can always restart the Oracle Universal Installer, do a custom install, and choose to install just SQL Developer.
That being said, my bias would generally be to download the most recent version of SQL Developer from OTN separately. SQL Developer gets released much more frequently than the Oracle client so the version on OTN is generally multiple revisions more recent than the version that was shipped with the client. If you're going to be developing code, you may as well leverage all the new features of SQL Developer rather than settling for whatever version was current when 11.2 was released.
Justin

Pivot table not rendered correctly in Internet Explorer

Hi
We have used Pivot table in the fusion development. The pivot table renderes properly in FireFox, but rendering in IE it gets distored. Is there any know issue with IE, Please me know ?
TIA
Anand

Are you sure the problem is the size of the icons? Beginning with version 6.0.2900.2190, Microsoft Internet Explorer stopped displaying the Web Server /mc-icons GIFs. This regression was apparently a side effect of Microsoft's attempts to fix IE's handling of malicious image files.
Apart from not using the buggy versions of IE, I'm not aware of a simple fix. I suspect a future Web Server 6.1 service pack will include a work around for the IE bug, but probably not until 6.1SP7.
I've added tweaked icons to my blog at http://blogs.sun.com/elving?entry=directory_listing_icons_and_ie that IE will display properly. You may wish to copy these into your ns-icons directory.

Android mobile does not work with submit fdf format

I want to gather data by mobile device (Android) as JavaScript does not work well in this environment, I intend importing the gathered data into a report PDF form with JavaScript functions etc., however the Acrobat mobile reader does not appear to work with the submit function for sending data (FDF format) by E Mail.
We are using Acrobat XI in most cases to gather this data and this works well, however we are experimenting with mobile options which are very limiting, and therefore we thought by just gathering the data on a mobile device we could import it into our working windows pdf form, our trials using this concept in a windows environment work, but we stumbled once we found that the submit button does not work in the android reader to send the FDF data.
Does anyone know of a work around?
Regards Mike

FormsCentral can be a bit confusing, so I'll try to clarify some things. It allows you to work with two completely different types of forms: web forms and PDF forms. Web forms are HTML forms and are hosted on the FormsCentral server and loaded into and submitted via the user's browser, so web forms do require internet access.
FormsCentral can also process submissions from PDF forms, and the forms can either originate from Acrobat or the FormsCentral designer, either the desktop app that comes with Acrobat 11 or the browser-based app. The FormsCentral designer allows you to create PDF forms with simple layouts, whereas Acrobat gives you much more flexibility. Designing a PDF form in FormsCentral can be helpful if you want to be able to use the same form for both a web form and a PDF form, allowing to to take advantage of each type at the same time, but you are not limited to PDF forms that are created by the FormsCentral designer.
Regardless of how the PDF was created, it can be set up to submit the form data to the FormsCentral server, which is done using the same format as a web form. It is done securely using HTTPS. There are certain features that are supported with PDF forms that aren't supported by FormsCentral, but this is usually not a problem. The most significant limitation is the 500 field limitation, so some larger forms aren't possible.
Once you have a PDF form created in Acrobat, you simply import it into FormsCentral and it gets uploaded to the FormsCentral server, where it is Reader-enabled, a submit button is automatically added, and is then downloaded so you can distribute it by placing it on your web site, sending by email, etc. So unlike web forms, FormsCentral does not host them for you.
It is possible to use Acrobat to modify the PDF that you download, first by selecting in Acrobat "File > Save a Copy", opening the copy, and making the changes. This is often done to change the submit button (size, location, other properties) of the submit button that gets added. You can then Reader-enable in Acrobat if needed and distribute the form.
Since it's a normal PDF form that is Reader-enabled, Reader users will be able to open it, fill it in, and save it at any time using Reader for Windows/Mac or Reader for Android/iOS. The latter currently only support submitting via email or to FormsCentral, as opposed to your own web server. Once the user has access to the internet, they can open the form and press the submit button. If the submit is successful, the FormsCentral server returns a response so the user gets some feedback, unlike with email "submits".
Each submission is automatically stored in the responses table, which you and team members can view at any time. An individual response can be downloaded as a filled-in PDF, or you can download the entire table and import the data into a spreadsheet for further analysis. As mentioned earlier, you can set it up so that you and others can receive an email for each submission, and it can include the form data in the body of the email if wanted.
Post again if you have any questions, or go to the FormsCentral forum here. The forum is generally very good, but sometimes questions about PDF forms are not answered entirely accurately, so it's sometime helpful to post here too.

WebDynpro Mobile - Table not rendered with PIE Client

Similar Messages

Maybe you are looking for