WebDynpro scenario for Objectives and Appraisals in ECC 6.0
Does anybody know if the scenario for Objectives and Appraisals under WebDynpro is available in ECC 6.0?
Our customer prefer not to use the BSP scenario and we know SAP was working in a new one based on WebDynpro but we can not find any information about that.
Any information will be very useful.
Thanks in advance.
Cristóbal.
Duplicate WebDynpro scenario for Objectives and Appraisals in ECC 6.0.
~Suresh
Similar Messages
-
Time Constraints for objects and relationships
Hi,
How to set up time constraints for objects and relationships under Org Management?
Thanks in advance.Hi,
If you need time constraint for subtype A002 then you have to define it over here.
Usually for all standard objects this table gets populated by SAP. But in case you want something which is not there in this table and is as per the client requirement, you can create.
regards
guds -
Difference between usage of "System -- Services for object" and GOS direct
Hey folks,
i was wondering if you know an answer for that problem:
1) Start ME23N (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function" Thats the behavior a want
2) Start ME23N and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. But there is no message coming up?! Same user, same PO! It seems that the Toolbox is just beeing restartet and thats it.
Same behavior in IW53/IW33 too, no auth error message if GOS is started via "System --> Services for Objects".
Thats our system:
ERP ECC 6.04 with NW 7.01
SAP Gui 7.20 PL 3 (signature design)
Thanks for your help and best regards
Olli
Edited by: Oliver Grewenig on Jan 18, 2012 11:30 AMHi Oliver,
I have done a similar testing for Tcode FB03 since I have done Archivelink configuration for this FI object.
Case 1:
=======
Start FB03 (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function"
Case 2:
========
Start FB03 and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. Still got the same error message "You do not have authorization for this function".
Later I added the required object in the authorization profile and it worked in both the cases mentioned above.
Since the same program is being executed behind both the cases, it will check the same authorization object as designed.
What I would suggest is that you perform this test again and ensure that no one modifies the authorization during your testing period.
Regards,
Deepak Kori -
Select statement for JDBC receiver synch scenario for capturing random value from ECC portal
Dear Experts,
I am working on ECC <----> SAP-PO 7.31 <----> JDBC synchronous scenario. I am clear about the config part except the Select statement. I will be
capturing 2 random values from the portal i.e. VendId and VendName in ECC to get the vendor details like Vendor Country, Vendor Status, Vendor Contact , Vendor Address etc from JDBC vendor table/view VENDETAIL.
What would be the select statement to capture the random values for ECC portal? My select statement would look some thing like this..
Select f1,f2,f3,f4 from table VENDETAIL where key1 = "VendId" and "VendName"
Please suggest if the above select statement works for the above scenario...
Regards
RebeccaHi Rebecca,
Your statement should work fine.
Please see the statement we use below.
SELECT eT_cashier, eT_proc_yn, eT_proc_date FROM eTest WHERE eb_proc_yn = 'N'
Just remember to update the change indicator so that you dont duplicate your records.
UPDATE eTest SET eb_proc_yn = 'Y' WHERE eb_proc_yn = 'N'.
Regards,
Jannus Botha -
I tRounding the Total Scores for Objectives and Competencies in Application
Hello
Where does one change the format of the total scores for the Overall Ratings and Comments - Objectives and Competencies in the front end /application?
Currently the total scores are in the format Objectives: Total Score 3.375
Competencies Total Score 2.69230769230769
HR want to show the Total Scores as rounded to 2 decimal places in the application so 3.375 becomes 3.38 and
2.69230769230769 becomes 2.70
Now i know how to do this in Toad using a select on the TOTAL_SCORE column in the hr.per_assessments table, but this is not i want to do here. Here i want to change the format in the FRONT END, not in the back end.
I tried the fast formulas but they dont seem to work unless i am missing something
Edited by: iandekoker on Apr 2, 2009 2:53 PMin case anyone wondered you use the package called apps.hr_appraisals_util_ss. Inside the package you can add round(,2) to obtain the result
-
Intercompany Scenario for Export and without Plant
Hi
Our client creates Big Projects; with two company Codes, One in India and another in Germany. They are working on PS. In most of the cases they get an order and they send the required material through Vendor, Vendor uses his Excise Invoice for sending the material and submit his Invoice to our Client for Payment. In turn our Client Bill to Customer and collect the payment; so use Third Party Sales Process. There is no Delivery from our Client Plant.
Besides the material our Client also provide Services.
Now the requirement is to Map the Intercompany Sale. It is not mapped at present, and so doing outside SAP. This need to be mapped. Scenario is like Sales Organisation of Germany gets the Order (for Material and Services both) they pass this order to Sales Organisation which belongs to Co. Code of India. Now material is sent from Vendor and India will bill to Germany and Germany will do the final billing to Customer. Here the customer is outside of India so India will have to Export, and Plant of our Client is not involved, as Material is sent from Vendor.
Also the same scenario happens for providing the manpower.
Guide me how can I map this scenario in SAP.
Thanks and Regrds
Amitesh AnandHi,
Intercompany sales- create seperate sales order type,
create 2 non stock material-
1-for to collect positive amount - assign this to WBS element-Billing element- YINT
2- for collect negative values-assign this to WBS element-Billing element& account assignment-YIND
Maintain Same milestones in both items.
for maintain seperate WBS level for these items
Maintain same billing type- and do collective billing- to capture both positive and negative value-
pass the amounts-first item - Sales account-credit-50(PK), second item 40(PK)-debit -
How to set timer intervals for object + and a motion for entering stage
Hi, I am making a simple game but I have a couple problems/queries.
1) My game is a touch an object and you get a point game, currently the objects appear randomly over the screen, however I am trying to get it to slide into the screen similar to the Fruit Ninja game, but not limited to entering from one side, does anyone know how to set this?
2) As I mentioned above my objects appear randomly, I have set a timer when I change the timer from 800 to another number, it just makes all the objects on the screen last for 800 milliseconds all at the same time then disappear and appear somewhere else on the screen for another 800 milliseconds and it repeats, what I am trying to do is make them come at different intervals, for example:
Object 1 - constantly appears, so when the 800 millisecond is over, it comes back on a different part of the stage
Object 2 - I want it to appear every 5 seconds, so when the 800 millisecond is over it will come back on the stage in 5 seconds, but not instantly like Object 1
But I have no idea how to do this :/ anyone have the code needed for me to do this?
Sorry for the long questions, I only asked because I really am stuck, I have been trying to do this for over 2 weeks now.
Thanks very much.
My Code
[Code]
//importing tween classes
import fl.transitions.easing.*;
import fl.transitions.Tween;
import flash.utils.Timer;
//hiding the cursor
Mouse.hide();
var count:Number = 60;
var myTimer:Timer = new Timer(1000,count);
myTimer.addEventListener(TimerEvent.TIMER, countdown);
myTimer.start();
function countdown(event:TimerEvent):void {
myText_txt.text = String((count)-myTimer.currentCount);
if(myText_txt.text == "0"){
gotoAndStop(5)
//creating a new Star instance;
var star:Star = new Star();
var box:Box = new Box();
var bomb:Bomb = new Bomb();
//creating the timer
var timer:Timer = new Timer(800);
var timerbox:Timer = new Timer(850);
var timerbomb:Timer = new Timer(1000);
//we create variables for random X and Y positions
var randomX:Number;
var randomY:Number;
//variable for the alpha tween effect
var tween:Tween;
//we check if a star instance is already added to the stage
var starAdded:Boolean = false;
var boxAdded:Boolean = false;
var bombAdded:Boolean = false;
//we count the points
var points:int = 0;
//adding event handler to the timer;
timer.addEventListener(TimerEvent.TIMER, timerHandler);
//starting the timer;
timer.start();
function timerHandler(e:TimerEvent):void
//first we need to remove the star from the stage if already added
if (starAdded)
removeChild(star);
if (boxAdded)
removeChild(box);
if (bombAdded)
removeChild(bomb);
//positioning the star on a random position
randomX = Math.random() * 800;
randomY = Math.random() * 1280;
star.x = randomX;
star.y = randomY;
star.rotation = Math.random() * 360;
box.x = Math.random() * stage.stageWidth;
box.y = Math.random() * stage.stageHeight;
box.rotation = Math.random() * 360;
bomb.x = Math.random() * stage.stageWidth;
bomb.y = Math.random() * stage.stageHeight;
bomb.rotation = Math.random() * 360;
//adding the star to the stage
addChild(star);
addChild(box);
addChild(bomb);
//changing our boolean value to true
starAdded = true;
boxAdded = true;
bombAdded = true;
//adding a mouse click handler to the star
star.addEventListener(MouseEvent.CLICK, clickHandler);
box.addEventListener(MouseEvent.CLICK, clickHandlerr);
bomb.addEventListener(MouseEvent.CLICK, clickHandlerrr);
function clickHandlerr(e:Event):void
//when we click/shoot a star we increment the points
points += 5;
//showing the result in the text field
points_txt.text = points.toString();
if (boxAdded)
removeChild(box);
boxAdded = false;
function clickHandler(e:Event):void
//when we click/shoot a star we increment the points
points++;
//showing the result in the text field
points_txt.text = points.toString();
if (starAdded)
removeChild(star);
starAdded = false;
function clickHandlerrr(e:Event):void
gotoAndPlay(5);
[/Code]The only thing that affects TopLink is the increment by, as increasing this is what allows TopLink to reduce the number of times it needs to go to the database to get additional numbers. Ie, an increment value of 1 means TopLink needs to go the database after each insert; an increment value of 50 allows it to insert 50 times before having to get a value from the sequence. The cache on the sequence object in the database affect the database access times. While it may improve the access times when the sequence number is obtained from the database, but I believe the network access to obtain the sequence is the greater concern and slow down for most applications. It all depends on the application usage and design though - an increment (and application cache) of 50 numbers seems to be the best default.
I cannot say what effect the cache vs nocache settings will have on your application, as it will depend on the database load. Only performance testing and tuning will truly be able to tell you whats best for your application.
Best Regards,
Chris -
Is it possible to configure Team calibration for Objective Setting Appraisals in EHP7
Hi Friends,
We are on EHP7. We have implemented objective setting appraisal for our client.
We have created an appraisal template under category group "Personnel appraisals". We have configured the VA, VB, VC, Column ids. Status tab flow is used from In preparation - Completed.
The enhancements are used to accommodate customer specific calculations for the scores based on the final ratings.
An additional requirement from the client is; once the appraisal process is over for a team; the team manager should be able to see the scores of his direct reportees in the MSS.
1) He should be given a provision to modify the final rating score; incase if he finds that one of the team members deserve a better score in line with the comparison of other team members. He should be able to call the template and be able to revise the final ratings from his MSS directly.
2) When he modifies the final ratings by calling the appraisal template on the MSS; that new score should be stored in the appraisal template (database tables); that is; this should overwrite the final scores which was initially calculated during the final appraisal discussion between the apprasier and appraisee. This new values should be taken for all reporting or new compensation revision process.
Should this requirement be addressed by Assessment of Employees and Calibration Process for Employee Assessments standard configurations?
If that is the option; I have already done these settings for flexible performance appraisal.
But in the MSS > under Talent Management > Assessment
We are getting a blank screen in the "In process & Completed " tabs. No employee is listed.
The calibration grid is empty. But under under talent profile; we are able to see the names of the team members.
Is there any other method available for this purpose ?
Request your comments on options to deliver this functionality.
Thanks.
ER.Hi Srujan,
For every paying company code you can have multiple sending company codes.
You can make this configuration in FBZP > Paying company codes tab.
Once in 'Paying company codes', here click on 'Company codes' button on top right.
This means you will need all the FBZP setup for your paying company code only.
Also, please refer to below link to configure cross company settings
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?QuickLink=index&overridelayout=true
Also, this document will be useful:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FIBP.pdf
Cheers,
Zubin -
Sales forecasting scenario for production and procurement
Hello Gurus
We have currently one scenario need your inputs and expertise
We have a requirement for the Sales forecast for the production and procurement planning. More over its like demand planning but sales needs to have a 6 months or yearly sales forecast in the system.
Is there any option or functionality available for the same.in SAP-SD
Thanks inadvance
Regards
VenkatHi KV chalapathi
check this link
How to maintain Sales forecast or projection in SAP
hope clear your issue
Regards,
Krishna -
Rounding the Total Scores for Objectives and Competencies in application
Hello
Where does one change the format of the total scores for the Overall Ratings and Comments in the front end /application?
Currently the total scores are in the format Objectives: Total Score 3.375
Competencies Total Score 2.69230769230769
HR want to show the Total Scores as rounded to 2 decimal places in the application so 3.375 becomes 3.38 and
2.69230769230769 becomes 2.70in case anyone wondered you use the package called apps.hr_appraisals_util_ss. Inside the package you can add round(,2) to obtain the result
-
ABAP WebDynPro tutorials for Roadmaps and drop-down list box
Hi Experts,
I need some tutorials on Roadmaps and drop-down list box in ABAP WebDynPro which will show me step by step process how to create application using this. 'help.sdn' pages do show the procedures for implementing those ui elements.
And also the previous threads refer to some expired documents.
Thanks in advance.....
Plz help....
Edited by: Akashdeep Basu on Aug 9, 2008 9:30 AMHi
[SAP BLOG on ABAP-WEBDYNPRO|https://www.sdn.sap.com/irj/sdn/nw-development?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9]
[Step-By-Step Approach|http://help.sap.com/saphelp_nw04s/helpdata/en/79/002c2a0d43e645a39a89dd662b5f68/content.htm]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
Regards
Pavan -
SOAMANAGER - Alternative URLs for WSDLs and Endpoints in ECC
Hi All,
We are publishing enterprise services using SOAMANGER transaction in ECC system. In
our development environments we have no problem with the process.
However in our cert and production environments we have loadbalancers,
with SSL offload, and so both port and URLs for the endpoints and WSDLs
need to reflect the different port/url introduced via our loadbalancer
and SAP web-dispatchers.
We have looked at note 11325985, which provides good guidance - however
when we use the alternative host / port as described on page 2 of the
note the service cannot be saved and activated -
Steps for Reconstruction
Run Transaction SOAMANAGER in one of our ECC systems SED/SEQ/SEP
Activate a standard SAP enterprise service, i.e
ECC_CUSTBASICDATABYIDQR_V2
In the Transport Settings tab of the Configuration of Web Service we
enter alternative URL - our load balancers URL for cert is
erp.XXX.com and for prod erp.XXX.com. When we save the
service it produces the following error ( when we don't specify an
alternative Access URL there is no error;
ERROR: ICF: Error when creating alias node: rc: unknown nMethod:
Alias Create; return code 15
Error Message Number Screen Number Transaction Program Table
Regards,
Ramesh1-Use the Tx: SRT_TOOLS
2-Double-click on "Display of Extended Service in Current Client Configurations"
3-Complete the "Configuration Name" with the name of the endpoint / service
4-Click on run
5-Double-click on the "Configuration Name" found in the left tree
6-You will obtain the url you are looking for without using the SOAMANAGER
7-Enjoy -
Requisites for Quality set-up for Objective setting & Appraisals
Hi Experts,
I am involved in setting up the QA server for an appraisal template that is finalised. Need guidance for the following:
1) The authorization details: for Appraisee & Appraiser
2) Creation of multiple users at the QA end to enable its testing.
Kindly share your views. Thanks so much...For end users:
You shall create users with your custom role + SAP_HR_HAP_EMPLOYEE + Authorization object(described below)
Also maintain: IT 105 subtype 0001
For managers:
You shall create users with your custom role + SAP_HR_HAP_MANAGER + Authorization object(described below) {you can consider P_PERNR }
Also maintain: IT 105 subtype 0001
For OSA we have different set of standard roles:
SAP_HR_HAP_ADMINISTRATOR (for administrator)
SAP_HR_HAP_EMPLOYEE (for employee)
SAP_HR_HAP_MANAGER(for manager)
You can use combination of following authorization objects;
->S_TCODE P_TCODE (for transaction authorization)
->PLOG( for personnel planning components)
->P_HAP_DOC(Access to appraisals)
->P_ORGIN/CON(Access to HR master data)
->P_PERNR(access to HR master data)
Minimum suggetsed settings for OSA;
For PLOG :
Infotype :1000, 1001, 1002, 1048, 5020, 5021, 5022, 5023, 5024, 5025, 5026
Planning status: 4, 3
Object type: VA, VB, VC
subtype: 0001, 5020, A605, A606, A607, B605, B606, B607
I hope this information will help.
Regards
Pooja -
Any combined scenario for Subcontracting and DropShipment
Hello Experts,
Requirement is to drive Sales Order to create Subcon order and push the processed semi finished goods from SC to Customer end and unprocessed scrap back to supplying plant. Transport from SC to Customer will be arranged and paid by supplying plant hence not a challenge. Is there any combined process to address SO driven Subcon and Drop Shipment? I thought of use of contract manufacturing but it suits majorly for big volume and finished product.If you are on ECC 6 with enhancement pack 5 or higher then you might want to look that the following:
Third party order processing with subcontracting
It's included in EHP6.05 function LOG_MM_OM_2. -
Scenario for Payment Terms Types Objects - DI Error: (-5002)
Hi Experts,
I am developing an scenario for creating and updating Payment Terms Types from the headquarter company to subsidiary companies. The object for this process is B1.8.8_PTT Payment Terms Types.
I created the bizstep and this is the xsl transformation:
<BOM xmlns="">
<BO>
<AdmInfo>
<Object>40</Object>
<Version>2</Version>
</AdmInfo>
<QueryParams>
<GroupNumber>
<xsl:value-of select="BO/BusinessPartnerGroups/row/GroupNumber"/>
</GroupNumber>
</QueryParams>
<PaymentTermsTypes>
<row>
<PaymentTermsGroupName>
<xsl:value-of select="BO/BusinessPartnerGroups/row/PaymentTermsGroupName"/>
</PaymentTermsGroupName>
<StartFrom>
<xsl:value-of select="BO/BusinessPartnerGroups/row/StartFrom"/>
</StartFrom>
<NumberOfAdditionalMonths>
<xsl:value-of select="BO/BusinessPartnerGroups/row/NumberOfAdditionalMonths"/>
</NumberOfAdditionalMonths>
<NumberOfAdditionalDays>
<xsl:value-of select="BO/BusinessPartnerGroups/row/NumberOfAdditionalDays"/>
</NumberOfAdditionalDays>
and so on with the rest of the field of the object...
<CreditLimit>
<GeneralDiscount>
<InterestOnArrears>
<LoadLimit>
<PriceListNo>
<OpenReceipt>
<DiscountCode>
<DunningCode>
<BaselineDate>
<NumberOfInstallments>
<NumberOfToleranceDays>
When I update or create payment term I get this error:
DI Error: (-5002) Data is not available; modify selection criteria and re-enter
If you know where could be the problem help would be appreciated.
Thanks in advance.
DavidHi,
I found my error in the xsl file.
The correct value is "<xsl:value-of select="BO/PaymentTermsTypes/row/...".
Thanks anyway,
David
Maybe you are looking for
-
Security setting is preventing the browser working. its an alert message
Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to
-
Does anybody have a clue as to when the Note II will be available at Costco? I'm starting to feel like an impatient little kid.
-
IPhoto 11...Thumbnails show, but pictures gone??
Recently I went under iPhoto to find a picture I needed from an event that happened last year. When I went under iPhoto, all my thumbnails/events show just fine, but when I double click one of the pictures in the events and it shows in the large win
-
Optimum hand held device...
Hey there... I need to get a hand held device (palm or similar), nevertheless, I want to make sure the one I get is 110% compatible with my mac OS and entourage... I am pretty new with mac (although I do consider I have got the hang of it now) and wh
-
I have an old mac book pro built in 2006. I just use it in the kitchen to go on the internet--which it does fairly well. It's running OS 10.6.8. Would it be risky to upgrade to the OS 10.7.4 Lion. Or should I leave well enough alone? I was hoping tha