Webdynpro testing using Ecatt from Solution Manager

Hi Experts,
I am trying to do test a Webdynpro application using Ecatt. But when i go to test script --> pattern
in the following popup i am maintaing the following data
group : UI Control
Command : Webdynpro
Interface : [GENERATED] then START RECORDING
i am getting the below error An error probably occurred during the logon to the Web Dynpro target system. Check user name and password in your eCATT target system.
I have created and mapped a HTTP rfc. Assigned ECATT_HTTP user also in the RFC. Also i followed all the steps mentioned in the [http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/df9f40eb72371be10000000a1550b0/content.htm]
kindly help me
regards
Naveen

>
Naveen Kumar wrote:
> Hi Experts,
>
> I am trying to do test a Webdynpro application using Ecatt. But when i go to test script --> pattern
>
> in the following popup i am maintaing the following data
>
> group : UI Control
> Command : Webdynpro
> Interface : [GENERATED] then START RECORDING
>
>
> i am getting the below error An error probably occurred during the logon to the Web Dynpro target system. Check user name and password in your eCATT target system.
>
> I have created and mapped a HTTP rfc. Assigned ECATT_HTTP user also in the RFC. Also i followed all the steps mentioned in the [http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/df9f40eb72371be10000000a1550b0/content.htm]
>
> kindly help me
>
>
> regards
> Naveen
Hi,
You may not have a valid user id in the target system.
Regards,
SSN.

Similar Messages

Error opening a Test Script inUFT from Solution Manager

This error is the subject of a call with SAP and HP but I wondered if anyone else has come across this problem.
We work with Solution Manager 7.1 (SP11) and HP's UFT 11.53 to create automated testing. We ustilise the two free seat licences for UFT that are provided via enterprise support. We do not use HP's Quality Centre.
On some occasions when trying to open a test script for editing UFT tries to open and then closes again. The error message below is displayed in solution manager.
“External Test Tool Quick Test Professional Is Busy and Cannot Create a New Test Script”
When this happens the local cache files are wiped. We have managed to salvage some of these scripts by pasting in copies of the cache file from another PC but some we had to recreate from scratch.

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

How to execute eCATT's from Solution Manager

Hey Everyone,
am using solution manager version 3.1,WAS 620.
and eCATT SAPGUI 640.all my recording are done with SAPGUI recording in Development System.and i execute via TestPlan STWB_2.
Now,my question is,How to execute all these eCATT scripts from Solution Manager.Do i need to transport the whole repository of eCATT from development system to Solution Manager?.
I appreciate if you guys pass some comments on this issue.
Thanks in Advance,
sarapu

Do i need to give target system to development system from solution manager?
can i give the same system data container in solution manager while creating testplan..
in prior do i need to create a testcatalog STWB_1 in order to create TestPlan?
please pass your comments,
Thanks,
sarapu

Testing Webdynpro Application using ECATT

Hi
all
I am going to test webdynpro Application using ecatt.For this in se80 I selected the
existing component(z component which was created by me) and i selected the application of that component and right clicked and selected START ECATT RECORDING and i have given the test cript name at that i have got one error USER ECATT_HTTPDoesnot exist. How to resolve this problem.
Please give me the soulution regarding this.
regards
venkat

Hi Venkatesh,
Before you can start recording any webdynpro application make sure that the below settings are done in the ecatt system and the target system , for further information refer ecatt documentation.
Create User ECATT_HTTP in the eCATT System
The administrator in the eCATT system must create a user called ECATT_HTTP(with a password). The user requires no special authorization but must be a system user (in transaction SU01, display the user and choose the Logon data tab. Under User Type, select System).
Activate the Service ecatt_recorder in the eCATT System
       1.      In the eCATT System, start transaction SICF and navigate to the service ecatt_recorder.
       2.      Double-click on ecatt_recorder.
       3.      On the Logon Data tab, enter the user ECATT_HTTPand the password.
       4.      Choose Save.
       5.      Select ecatt_recorder and choose Service/Virtual Host -> Activate.
Activate the Service ecattping in the Target Systems
Java System
       1.      In the Visual Administrator, choose Server ->Services -> Deploy.
       2.      On the Runtime tab, select Application.
       3.      Select ecattping.
       4.      Choose Start Application.
ABAP System
       1.      In the target system, start transaction SICF and navigate to the service ecattping.
       2.      Select ecattping and choose Service/Virtual Host -> Activate.
Thanks and Regards,
Balaji.D.N
Edited by: Balaji DN on Dec 31, 2008 12:04 PM

How to test webdynpro applications using ecatt

Hi All,
Can anyone give me detail explanation of what is ecatt and how it can be used for webdynpro applications.
Thanks in advance,
Aleem.

Hi Aleem,
The Extended computer Aided Test tool is known as eCATT. Enable businesses to record and play back applications as automated test scripts.
The Primary aim is the automatic Testing of SAP business processes. Each test generates a detailed log that documents the test process and result.
I have written a wiki page for webdynpro abap testing using ecatt .
<a href="https://wiki.sdn.sap.com/wiki/x/K8Q">ecatt on webdynproabap</a>
Regards
Sathish

Linking eCatt to Solution Manager

Hi All
I am new to this so please bear with me.
I am currently learning ECatt. I have created a small chained script within ECC6 which utilises an external file.
If I test this from ECC6 - it performs as expected - and utilising the external file for data.
When I then try to launch from Solution Manager, I get "Variants that match Selection XXXX Cannot be Found".
When I go back to the Test Configuration and take out the option of the external file and use internal with a variant - I have no problem.
I am wondering if it is possible to utilise an external file via Solution Manager. If so, can anyone advise what may be the problem?
It is a little confusing, knowing that I can perform the test directly within ECC6.
Thanks in advance
Elvie Jenkinson

Hello Elvie,
I am facing a similar problem. Where you able to fix this issue? Kindly let me know the solution as well.
Thanks,
Majisha.I.B.

BPML from Solution Manager

Hi all,
I want to download in excel file BPML from solution manager, kindly guide me the process, can we do that from solution manager or is there any other similar thing to BPML that we can get from Solution manager.
Thanks

there isn't a true BPML in SolMan.
The closest thing you can get to it, which better in my opinion, is:
1. Go to SOLAR_EVAL
2. Under configuration select the Cross Tab analysis report
3. Select the various reports you wish to merge (I recommend transactions, config, development and testing if you have used those tabs)
4. Click execute
5. Export it to Excel
6. Enjoy!
regards,
Jason

How to obtain a Question and Answer DB from Solution manager.

Dear Gurus,
How to obtain a Question and Answer DB from Solution manager for HCM.
Regards,
Rajasekar.

http://saphrexpert.blogspot.com/2008/12/questionairre-to-be-used-during.html
Check this link
this is not the answer to your question but it will helpful

Patch approval error getting from solution manager

Hi,
We are getting error while downloading patch approval from solution manager. As reference below error, I have checked this note 982045 & put valid user id & password of the service market place there but error is getting same. Here following error screen as mentioned below. please suggest us.
Regards
Abhijit

Hi,
Thanks for sharing these note but after using this note 1178684, we are facing this error as follows.
trc file: "dev_rout", trc level: 1, release: "700"
Fri Feb 28 16:37:05 2014
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
main: pid = 4072, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
Fri Feb 28 16:37:06 2014
reading routtab: './saprouttab'
*** ERROR => SNC field without SNC active, skip line 2 [nirout.cpp   7767]
*** ERROR => SNC field without SNC active, skip line 3 [nirout.cpp   7767]
*** ERROR => SNC field without SNC active, skip line 4 [nirout.cpp   7767]
*** ERROR => SNC field without SNC active, skip line 5 [nirout.cpp   7767]
*** ERROR => SNC field without SNC active, skip line 6 [nirout.cpp   7767]
Fri Feb 28 16:37:43 2014
*** ERROR => SncPEstablishContext() failed for target='p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE' [sncxxall.c 3379]
*** ERROR => SncPEstablishContext()==SNCERR_GSSAPI [sncxxall.c 3345]
      GSS-API(maj): Miscellaneous failure
      GSS-API(min): Invalid password (PIN)
    Unable to establish the security context
    target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
<<- SncProcessOutput()==SNCERR_GSSAPI
*** ERROR => NiSncIInitHdlSecurity: SncProcessOutput failed (rc=-4;0206E3B0) [nisnc.c      1098]
*** ERROR => NiSnc2Connect C1/-1, 194.39.131.34 (rc=-17) [nirout.cpp   2816]
*** ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'solman' failed (rc=-17) [nirout.cpp   2243]
Regards
Abhijit

How to remove Production System from Solution manager.

Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.

Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi

Connection from Solution manager to SapNet

Hi,
I want connect from solution manager to sapnet for downloading support packages. What i need to do ?
I think that i need to:
1. official IP address for solution manager host ? Could this ip address be one in all network and routed to solution manager host ?
2. Install sap router on solution manager host ?

Hi Mindaugas,
For getting SAP Solution manager connected to SAP Net the following where mandatory
We Should have a official IP address of the computer on which SAP router can be configured. Its not necessary that you should have it in solution manager server. You can have it in any of the computer within your network and configure SAP router in that machine. This should be an official and registered IP address. You cannot use address such as
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
Later solution manager can be connected to SAP net using three RFC connections SAPOSS, SAP-OSS, SAP-OSS-LIST-O01. But before starting this make sure that you have configured SAP router correctly. Only then these RFC connections will work.
Also refer Note: 28976
regards,
Anandh

Security Testing using eCATT

Hello,
I would like to know if any one has found a good solution for Security testing using eCATT.
Thanks you
Gilles

Hi Gilles,
Security testing in tems of roles and authorizations of users is very much possible in eCATT as conveyed by Jon.
If you have large quantity of scripts which need to be tested depending on roles & authorization and if you are testing it with SCAT transaction using catalog, plan & package then you can prepare package depending on user IDs. This will help in a way that you will be giving once the User ID & password at execution time for given package and all the roles, authorizations linked to that ID will be tested for that bunch of scripts.
Hope this helps.
Regards

Configure EP to display contents from Solution Manager

Hello,
How to Configure EP to display contents from Solution Manager? I want to access Solution Monitoring through Portal, how to do this?
I will appreciate if someone can help me,
Waiting for reply,
Regards
Sharmishtha

Hello Lee
I want to display solution monitoring on portal. I will access the portal instead of solution manager to view CCMS alerts.
I have configured ccms in solution manager which is my central system, so now i want to display these contents on portal.
is there any way i can do this task. I have solman 4.0 with SP15. I use work center for this configuration.
Will appreciate if you can direct me the right way.
Thank you
Regards
Sharmishtha

Monitor Systems From Solution Manager 4.0

Hi Dear Gurus,
I have recently Instaled SOLMAN 4.0 on windows with Mysql. I have configured the Maintainence optimizer and now its working fiine.
From my organization requirement they want to monitor ERP and BW systems from solution manager.
Can any one please tell me how to start regarding this.
And one more question is i am just wondering Central User Admin is different installation or we have to configure SOLMAN 4.0 to use CUA.
Many thanks for your time.
Kind Regards,
Vamsi.

Hi,
You first need to Setup landscape and create RFCs
[Data Collection|https://websmp109.sap-ag.de/~sapidb/011000358700004860052004E.sim]
[Create Systems|https://websmp109.sap-ag.de/~sapidb/011000358700000894082006E.sim]
[Create RFCs|https://websmp109.sap-ag.de/~sapidb/011000358700002912202006E.sim]
[Assign Logical Components|https://websmp109.sap-ag.de/~sapidb/011000358700002912242006E.sim]
Then Create Solution,
Then Setup Solution Monitoring
[Setup|https://websmp109.sap-ag.de/~sapidb/011000358700006936062005E.sim]
[Monitoring Graphic|https://websmp109.sap-ag.de/~sapidb/011000358700006939872005E.sim]
[Exhaustive very good tutor|https://websmp109.sap-ag.de/~sapidb/011000358700005479192006E.sim]
This will solve your problem.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Jan 16, 2008 4:31 AM

An advanced solution for sending email from Solution Manager (or CRM)

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

Webdynpro testing using Ecatt from Solution Manager

Similar Messages

Maybe you are looking for