Webdynpro Theme Specific Application

Hi All,
Is there any way by which we can change the look of webdynpro applications.We need to implement themes specific look in the webdynpro application.
Pls help
Rakesh

Hi ,
This can be achieved Refer to the standard SAP documents.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ccb6bcf4-0401-0010-e3bc-ec0ef03e13d1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ea0d790-0201-0010-80b8-b680496a3838
Also you can refer to the webbolg
/people/lisha.peter/blog/2005/07/07/make-your-webdynpro-application-theme-specific
Thanx
Pankaj

Similar Messages

No Data to display in Application failure report for a specific Application

Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi S

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Change/Set permissions for specific application?!

I have at least one application that always enables GPS although it isn't needed --> more power consumption, I don't know why it is doing this. Additionally I have some applications I don't want to have access to the internet (at least if I'm not connected to Wifi).
On the other hand I have a java application that should have access to GPS and mobile data without asking every time for the permission.
Where/How can I achieve this? Why have some applications always to ask when others have permissions for things they don't need for proper function?
PS: N8 with Belle

Hi AUTxRemoteC,
According to the best of my knowledge you can only access suite settings and change them according to your preferences for certain applications only. To be able to do so, go to Menu> Settings> Installations> Already Installed the open it. From there, you can only change specific application settings and I know mostly java applications use this method. To check on which applications that you can access and change the settings place your finger to the desired application and hold it and when you see suite settings then you can change it settings. Usually when you hold to an application there is view details and delete but when you see the extra option that is suite settings then open suite settings and change them to your preferences.
I hope that it helps you.
Ngwangwa - Six Million Ways To Die Choose One

Using native events in specific application with J2ME

I can capture native events of a cellular phone using J2ME (button of beginning and end of calls, description of effected calls) to use them in a specific application?
I can use resumeRequest() method of the MDIlet class to capture the events of the start and the end of a phone calls or services used in an J2ME application? When, as and where I can use such class?How I can pass to my application effected phone calls , sent messages SMS and the accesses the InterNet? That methods and class I must use? How I must make to develop a class that executes this type of function with JAVA? Where I can find codes of aid or sample, tutorial, tips, etc to create such functions?

Fukiku,
 Did you get this working?
 You can also try setting the environment variable java.library.path.
 Please post your stack trace to the forum as well.
 
 Hussein Badakhchani

Standard function keys in specific applications

Just wondering whether there is any way to use the standard functions of F1, F2 etc in specific applications without having to have this function enabled in Leopard as a whole. For example, in general, I want to be able to adjust the volume and brightness on my Macbook Pro without having to push the fn-key. However, when, and only when, I use Pages, I want to use these keys as standard-function keys in order to be able to switch between styled. Is there any way I can make this happen??

I would settle for knowing how to do that again, but what I would really like is the ability to either quickly turn on and off the Mac default uses for the function keys or, better yet, have it turn off in certain apps.
I've tried the "Use all F1, F2, etc. keys as standard function keys," button in the Keyboard & Mouse System Settings, but I don't see where that has any sort of effect.
yes, it does have an effect. it lets you use F-keys as regular keys and map them to what you want.
The reference there to the 'fn' key makes me think it's only for laptops.
no, this is for any keyboard that has a fn key. if you have it on your keyboard then you get that checkbox in keyboard system preferences. if you don't have it the checkbox won't even show up. when the box is checked you have to hold fn to get the functionality of the F-keys written on them. otherwise they act as regular keys that can be mapped to whatever you want. you can do this in system preferences->keyboard&mouse->keyboard shortcuts.

Webdynpro Theme

Hi
I have an webdynpro Application which is using Custom webdynpro Theme.
My Application is running on SP15 2004s.
I have 2 Issues.
My Text on Links is being displayed with more font size than the normal text.
I have consistent font size as 0.7 em
2nd thing
I want to change the iCons of TreeByNesting in a Table. Expand,Collapse etc..
I have changed this icons for normal Tree View. They are not being reflected over there.
Thank you
Regards
Krishna Kanth

Hi
Check whether you have some space after the folder name that you have specified in WAS location.
I see one point, after your XYZ folder name, kindly place a '/'(back slash) so that the theme is picked from / inside the custom folder.
Otherwise, I donot see any issues for the theme to work !.
Do revert back with any other queries. The forum is always there to help you !
regards
sathyanarayanan

How can i share specific applications and files between laptops

I just bought a McBook Air and I would like to share specific applications and files between my old MacBook Pro and the nw MacBook Air.

Try target disk mode:
http://support.apple.com/kb/PH3838
Other wise use a USB thumb drive or a HDD to transfer them.
Ciao.

Finding the backup of a specific application

Hello, I recently had a problem with an application that crashed randomly then wouldn't load back up again without crashing again. Restoring a backup fixed this problem and reverted my application back a few days (when I made the backup). But if this happens again, I would like to attempt to pull the data from this specific application alone and send it to the developers to possibly assist them in finding and fixing the problem. I've located the backups but none of the names correspond to any IDs or tokens that have to do with the application at all. I've even tried reading the plist files but they contained nothing that I could decipher. Is there any way or suggestion on what I could do to figure out which files belong to that application?

There is an app that comes with Toast 9 called, 'Get Back Up'. It is a good back up app that allows to back up specific folders. There are countless more back up apps, but I don't know of any that will operate like Time Machine backing up specific folders. You would have to do it manually. However, from your post I'm concluding your back up drive is only for Time Machine and not partitioned. This will create issues for you if you intend to use that drive for general data back up. You really only need around 250GB (or three times your internal hard drive) for Time Machine. If you want to back up your images and files separately on the same drive you will have to erase and partition the external drive to accommodate them. Also, I never rely solely on hard drives for image back up. They are way too precious. I always burn them to DVD or CD to be sure. You never know when a hard drive will fail, but DVDs and CDs have a shelf life of up to ten years if stored correctly, which is, stored vertically in hard case and in a dark, dry, cool place. - I've always wondered why Apple supplies their system restore discs in those stupid paper folders. They are disc killers!

Any shortcut for opening an specific application?

Hi, maybe I´m asking for a silly question.
Can I setup a short cut for opening an specific application? Just in the same way when we open Documents or Application Folders?
Regards.
Guillermo

It can be opened by another person if they simply navigate to the Applications folder: unless you only allow them access to a separate account with Parental Controls in place (they can limit access to specified applications). And it's never wise to allow other people access to your own account.
If you want to open an application on a keystroke you will need a third-party application. QuicKeys can do just about anything but is expensive: there are other programs which can do this.

Route an specific application through a proxy

I'm trying to route all the conections from an specific application through a proxy (HTTP) with user authentication.
The application doesn't have an option for this.
I know I can do this in two ways. The first one is modify the network configuration in the System Preferences, however, this affects all the connections, which I don't want.
The second method is using a third-party software: Proxifier, but it is too expansive for what I think can be done naturally by the system.
Is there another method, preferably free, to do this? Something in Terminal or similar?
Thank you.

Yes, it can be done; Assuming all of the class files
you need are installed, and the servlet engine has
access to other resources you need (the correct files,
other devices, etc) you can do it;The class files will be installed. Does the servlet engine normally have access?
I am probably making a Windoze exe from the class files, since the target users are all using Windoze. Does this have any effect on the question?
I would avoid it on general principles.
There are a couple of things to consider:
Your use of the word application make it seem like you
are essentially starting a Java batch job and running
it in a servlet engine. If you are doing this for a
job, you might find that employer policies prohibit
the use of web server resources for batch processing.Not a batch job, the application is basically a server itself. It is going to have request coming in on a port and it is going to respond. I am not trying to do this without the knowledge of the server admin. They are willing to let me run the server app. The only thing is that I need not tell them every time I want to stop/start the server app since the web server is at a remote location from where I am. If I can start/stop the server remotely, it saves them the trouble.
I can also use this interface to monitor the error log, etc...
The security models in servlet engines are frequently
different than for batch, the especially the way they
are optimized is different.
You will not be able to wait to reveal final results
unless the application is very quick; Browsers
timeout rather quickly.Like I said above, I dont need to wait for results. I just need to be able to make a request to a servlet, and have it start/stop the application. hmmm... stopping might be a problem right, since the servlet wont have a reference to the app once it is running.... or can it hold the reference?? I am quite lost since I have never worked with servlets before.
Thanks again,
Dewang

Security question - restricting access to a specific application

Hello,
Looking for suggestions on how I could limit connections to a database to a specific application. Here is the scenario.
I have an application running from a desktop that has oracle accounts for each user. The user has a read only role by default that I cannot alter. This means that the user can use excel (for example) and bypass the application to look at sensitive data.
I know I can lock down the desktop, remove excel, etc, etc. However, I'm looking for other options that could be used, be it process, additional Oracle software (the database is 10R2 enterprise edition), etc.
Problems: The app doesn't identify itself internally. I can see the program, but that is easily faked so thus unreliable.
Any suggestions at all?

I'll look at VPD again, but don't think the vendor will support us if we do.
We are unable to modify the app - third party supported
exactly - dont want toad, excel, sql*plus, whatever accessing the db from the same host.
thought above secure app roles as well, but need something concrete that I could validate agianst. If the app could call it and supply that, great but I cannot alter the application. I'm using secured app roles in an in house app and it does work well.
looking with our ti staff about encapsulating the application communication through a secure vpn tunnel into the data zone. may be an option as all other connections would not make it through the firewall into the data zone. (everything is internal, just to be segmented).
Edited by: GPC on Aug 26, 2010 12:18 PM
Edited by: GPC on Aug 26, 2010 12:22 PM

Specific Application filter while desktop sharing

I need help for the specific application filter while on desktop sharing. i.e i have to share entire Desktop with current running processe except server application window (UI).http://blogs.msdn.com/b/rds/archive/2007/03/23/writing-a-desktop-sharing-application.aspx
I got the samples for desktop sharing using Windows Desktop Sharing References. In that I need to filter the specific application. But i didn't know How to do that.
By using following things we can try to filter the specific Application. But I want to know, how to call Viewer side share property to fire the OnApplicationUpdate Event on server side.
RDPSRAPI_APP_FLAGS & RDPSRAPI_WND_FLAGS enumeration - How to set the flag for specific application to give high level security process.
IRDPSRAPIApplicationFilter
_IRDPSessionEvents_OnApplicationUpdateEventHandler
Please give me some examples to do this....
Thanks
Narmadha

Hi Narmadha,
Your issue seems to be out of the scope of this forum. We only focus on issue about RDS/VDI deployment, management and operations. For development and API issue it is appropriate to ask in our MSDN Forum:
http://social.msdn.microsoft.com/Forums/en-US/categories
Thanks.
Dharmesh Solanki
TechNet Community Support

Bpc 7.5 - not sending data on a specific application

Hi I use SAP BPC 7.5 SP7 patch 1 with Microsoft Sql Server 2008.
I moved my AppSet from a server 32bit to a server 64bit.
On 32bit server everything works fine.
On 64bit server (64bit configurations written in BPC installation guide applied + no error in Server Manager > DIagnostic): I can't send data on a specific application I have.
On 64bit server: I precessed all dimensions and all applications and then I even optimize. Nothing change.
I have to applications: A and B.
On Application A I can send data correctly.
On application B in my Input schedules when I send data: everything seems to work fine but afer data refresh on my sheet the value disappear and nothing is written into FactWB table. No error displayed.
Those input scheules are the same I have and working on 32 bit server.
No errors into Windows event viewer so... what can I check or do more? How can I fix it?
Edited by: Francesco Andolfi on Feb 10, 2012 7:56 PM

Hi Francesco,
have you tried modify application on B?
have tried if you can send data through a new simple input schedule?
Kind regards
Roberto
Edited by: Roberto Vidotti on Feb 10, 2012 8:35 PM

How to get the list of batch jobs running in a specific application server

Hi Team,
I am trying to check in SM37 if there is any specific condition to get the list of batch jobs assigned to a specific target server but cant find any.
Is there is way to find the list of batch jobs assigned to run in one specific application server.( Target server specified in SM36 while job creation)

Hello,
This is what you can do in SM37.
Execute the list of batch jobs, when the result appears on the screen edit the ALV grid via CTRL+F7.
Now add the following columns "TargetServ" and "Executing server".
You will now have two extra columns in your result list.
TargetServr contains the value of the application server where the job should run when you have explicitely filled it in.
Often this is empty, this means that at runtime SAP will determine itself on which application server the job will run (depending of course where the BGD processes are defined).
Executing server is filled in always for all executed jobs, this is the actual application server where the job has run.
You can also add these two fields in your initial selection screen of SM37 by using the "Extended job selection" button.
I hope this isusefull.
Wim

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

Webdynpro Theme Specific Application

Similar Messages

Maybe you are looking for