Webelements : does not support when i add the data sourcce& view in HTML

hi Masters,
i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
then it works when i view it in HTML VIEWR.
how can i make it to work despite me using the data soruce.
thank you,
pasala

hi Pasala,
this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
here's what you can try though:
1) install the latest sap integration kit on your boe system machine(s)
2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
hopefully step 1 & step 2 will solve the issue.
jamie

Similar Messages

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

  • When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

    When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
    == URL of affected sites ==
    http://all

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
    Thank You!
    I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
    BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
    Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
    Incidentally, whats up with all of the Java Console Add Ons?
    I have:
    Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
    Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
    What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
    Also, .NET Framework 0.0.0 Should I uninstall it?

  • Adobe Reader plugin :This sentence "le fichier ne commence pas par '%PDF-'" appears when I try to open some (not all) PDF files within Firefox (does not happen when I download the file)

    This sentence (in french version) "le fichier ne commence pas par '%PDF-'" appears when I try to open some (not all, mainly bigger than 1Mo) PDF files within Firefox (does not happen when I download the file)

    You mention Thunderbird, has the PDF file been emailed to you? If it has this support page from Adobe may help - http://www.adobe.com/fr/support/toptech/acrobat/319294/

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • HT5509 In guided Access does not unlock when I Press the home button I need to run down the Battery and turn back on and it is then out off guided Access

    In guided Access does not unlock when I Press the home button I need to run down the Battery and turn back on and it is then out off guided Access

    How To Get Out Of Guided Access On iOS6? : TechNGuide
    SOS I cannot Exit Guided access: Apple Support Communities

  • HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

    hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

    Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
    Will the data on my iPhone be preserved?
    No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
    Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
    copied from Apple - Support - Service Answer Center

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

    When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • Lightroom 3 does NOT support raw files for the  Canon Sureshot S95

    Have just bought the new Canon Sureshot S95
    after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
    Canon Sureshot S95.
    Come on Adobe.....please provide an update asap.

    (1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW.  Hardly a satisfactory solution.
    (I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ). 
    (2) SUGGESTION-  even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting).  I am sure users with that preference would still prefer a JPEG than no picture at all!
    Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs.  So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
    JJ
    *  (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

  • I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?

    I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?

    No, you have to sell yours and buy the new iPhone 5 with the proceeds.
    Please do not double post. Asking many times does not change the answer.
    Message was edited by: ckuan

  • HT201406 1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

  • Folio Builder does not support proxy authorisation on the mac.

    Folio Builder does not support proxy authorisation on the mac.
    Which’s solution to connect ?

    It does not work because the Folio Builder tries to connect to the proxy as "anonymous". I don't know any solution up to now... Anyone?

  • HT6154 iphone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When input manually; the date & is deleted after a few seconds. How is this corrected?

    After the latest software update; the iPhone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When inputed manually; the date & is deleted after a few seconds. How can this be corrected?
    big Geo.

    After the latest software update; the iPhone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When inputed manually; the date & is deleted after a few seconds. How can this be corrected?
    big Geo.

Maybe you are looking for