Webengine stuck in RUNNING state - JavaFX 8.0.0

I am using jdk 1.8 and along with it the latest javaFX 8.0.0. I moved to the latest java FX as i was facing issues with custom fonts loading with the previous version of java FX with JDK 1.7. However with the latest version, my webengine is stuck in RUNNING state and the url page is never getting loaded. Anybody faced the same issue with javaFX. I need this to be fixed for my app to up and running.
Thanks

Hi ...
Restart your router then follow the instructions here > iOS: Unable to update or restore

Similar Messages

Crystal reports run through infoview stuck in running state

We have some Crystal reports that are executed via InfoView that contain calls to function modules in SAP R/3. Out of 200-300 exectutions, we will get one or two of them that get stuck in a "running" state and they never complete. When we reschedule the report they complete in a few seconds. Has anyone else experienced this? We're trying to determine if it's a problem on the BOE side or in the gateway in R/3. Again, 99% of the time the reports work, but just an occasional one or two get stuck each day. We are using BOE XI 3.1 SP3.

OK. Sorry, but now I want you to read over what you wrote. Put your self in my shoes and see if you can even start to troubeshoot this. Looking at the following may also help;
[Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]
Step 2 Asking Your Question; Provide Enough Information
/people/ludek.uher/blog/2008/11/24/what-do-i-need-to-do-to-get-the-fastest-issue-resolution
- Ludek

Instances stuck in running state--please help

Hi,
We have a composite with all synchronous processes with synchronous calls.
We have a lot of running instances in the EM console and when we check the audit trail and the flow of many instances, the flow is completed successfully but the instances are still present in the running state. Many of the instances are in between the flow and are not completing at all. They are stuck at that point and never complete.
This we assume was due to some abnormal activity like the database being full or shutting down of composite when bpel instances were in running state.
Can anyone tell me why such kind of thing had happened and how to handle these cases.
Thank you.

R,
I am assuming that you are also working with SOA Suite 11g.
I too had the same issue and was tuning the Bpel Engine but i was not able to get rid of it .
When i submitted a SR they responded that it was bug in 11.1.3 and they are working on it.
Hoping that we would get a patch soon.
Thanks,
Tirumala Dixit.

Backup job stuck in running state

Hi
I am using 11gR2 RAC on Windows 2008 R2. I have several different database jobs stuck in a running state. However if I check the view v$session_longops I can not see anything in there relating to RMAN. If I drill down to the job and the step that is running, in the Error Log it states:
error writing input to command
Could someone point me in the right direction as to how to investigate this?
Thanks

if you know that the execution finished or is hung,use this query:
SELECT p.SPID, s.sid, s.serial#, sw.EVENT, sw.SECONDS_IN_WAIT AS
SEC_WAIT, sw.STATE, CLIENT_INFO
FROM V$SESSION_WAIT sw, V$SESSION s, V$PROCESS p
WHERE s.client_info LIKE 'rman%'
AND s.SID=sw.SID
AND s.PADDR=p.ADDR;
and kill them.

OIM server not running, stuck in starting state

I have started OIM server through cmd , but its not going to running state, and its stuck to starting only.
Kindly suggest
KK

is there any error?
try once by deleting temp files in oim_server.
_saurabh

Instance going in Running state while invoking DB adapter

HI,
I am stuck in a very tricky scenario.
I have to select data from two tables:- Header and Line table.
I am using a VIEW to fetch data from both the tables by passing Invoice id.
Now when ever i am having single line data in Both the tables Header n Line for a single Invoice id, the instance is running successfully.
But when there is multiple data in Line table for the Invoice id, the instance is going in running state and after every 60 seconds, it is creating a new instance which will also be in running state, thus this will continue and server will go in incompatible state.
I need to resolve this issue.
Please help.

Hi,
What operation did you use to get the data from the view?
Did you use the custom sql or Select operation?
Arik

Workflow stuck in starting state after applying SharePoint 2010 CU December 2012

I have custom visual studio workflow which are associated with Custom content type. workflow gets triggered automatically when a file is uploaded to SharePoint. Everything was working fine till when i apply the following CU
http://blogs.msdn.com/b/joerg_sinemus/archive/2012/12/27/sharepoint-2010-and-december-2012-cu.aspx
After applying this my workflow get stuck in "Starting" state.
No error were logged in 14 hive logs.
Thanks in Advance!

It took me a while but I came up with a work around. There is a PowerShell script below that can be used to trigger the workflow. Hopefully this will hold all of us over until the official fix arrives.
First remove the auto start on change or new from the affected workflow
Edit the script below to match your environment
Add the script to Windows task scheduler with the PowerShell.exe in the command line
This assumes PowerShell.exe is in the path
Then add the full path and script name in the add arguements text box
Script:
#The purpose of this script is to start the SPD workflow with the windows task scheduler for a trigger
#This should avoid the check in-out issue caused by the December 2012 SP CU patch
#This needs to be run on an account with membership in the farm administration group for SharePoint and Shell in SQL
#You can use a find and replace to replace the server and other names with your actual names
#There are no status messages being used since this will be a scheduled task in the Windows task scheduler
#Add SharePoint modules and create variable space
add-pssnapin microsoft.sharepoint.powershell
start-spassignment -global
#Open the web site, list and the workflow
$site=get-spsite %site url%"
$web=get-spweb %Web url%
#Open the %affected% library or list and workflow association
$%affected%=$web.getlist("%affected%")
$manager=$site.workflowmanager
$culture=[system.globalization.cultureinfo]::currentculture
$wfname="%affected workflow name"
$association=$%affected%.workflowassociations.getassociationbyname($wfname,$culture)
$data=$association.associationdata
$wfrunoption=[microsoft.sharepoint.workflow.spworkflowrunoptions]::synchronous
#Start workflow
foreach ($item in $%affected%.items) {
$site.workflowmanager.startworkflow($item,$association,$data,$wfrunoption)
stop-spassignment -global

I have a set of 3 USB disk connected to my TC via a USB hud. I usually swithc the TC at night. When I restart the next day it stucks in amber state. when I disconnect the USB hub where my discs connects and restart, it start properly. Any hints?

I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?

LOL.. don't switch off the TC.. this is fairly typical behaviour..
Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
Are you running latest firmware for your TC?
What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
Get one bigger USB hard disk instead of 3 smaller ones.

BPEL instances in Running state - SOA version 11.1.1.4

Hi ALL,
I am Working with the Orace SOA 11.1.1.4 version and facing the same issue
Description :
I have developed a synchronous BPEL / Composite that listens over a JMS Queue configured in weblogic (MessageType is Text /String - XML Stirng). Based on the Operation Type in the Message the BPEL forwards the message to other Composites .
If the server is restarted or the composite is redeployed , the mesages get processed fine ,but if there are more no of messages in the queue , the instances hang in running state , this happens frequenlty.
I tried modifying the DispatchThreds and invoke Thread which make thing even worse :-(
Help Needed Got badly stuck up :-(
-Lakshmi

Team,
Any idea? I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.
Your help is appreciated.

Workflows stuck in "Starting" state.

Workflows have been running fine for awhile. All workflows are currently stuck in a "Starting" state. Was finally able to capture this in ULS
03/20/2014 11:58:23.46 w3wp.exe (0x15AC)                       0x2A98 SharePoint Foundation
Workflow Infrastructure       72fv Unexpected AutoStart Workflow: System.ArgumentException: Value does not fall within the expected range.     at Microsoft.SharePoint.Workflow.SPWorkflowActivationProperties..ctor(SPWorkflow
workflow, String initiationData, Object context)     at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflowElev(Object context, SPWorkflowAssociation association, DateTime elevationTimeUtc, SPWorkflowEvent startEvent, SPWorkflowRunOptions
runOptions)     at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite superUserSite, SPWeb superUserWeb)
Any ideas?
TIA

Hi Milo,
Please check whether you have installed any CUs for SharePoint 2010.
Please install June 2013 CU or higher for SharePoint 2010, compare the result.
Here are some similar posts for you to take a look at:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

SCOM CI Connector is stuck in runnig state

Hello,
I have problem with SCOM CI Connector in SCSM. It is stuck in running and 5%. I have tried to disable and re-enable but without success. I can't see any workflow related to this connector in workflow status. Is there any possibility how to stop this or diagnose
what is wrong?
Thanks

I'm assuming you've tried refreshing the connector view. Have you tried reconnecting the console to ensure that you're looking at fresh data?
You can try this:
Get-SCSMConnector "Name" |Set-SCSMConnector -state:disabled
And then try restarting it.
- Get on the floor, do that dinosaur

SMQ2 - Found a queue with name "*" and all other queues stuck in STOP state

Hi all,
We have a problem on the ECC side, on outbound asynchronous proxies. Sometimes a new queue appears on SMQ2 there with name "", and with status "STOP". At this time, all other queues stuck with STOP status... the only way of resetting all those queues to RUNNING state again is to delete the queue named as ""...
Some of you has any idea how this queue "*" appears there and stop all other queues?
thanks
roberti

Hi Ravi,
Is not only about one queue stopped... the problem is this queue named ""... with status STOP, all other queues stops too with it. The only way to make things work again is to delete the queue named as ""... the problem is to discover what or who is creating this stupid "*" queue. I think that this is a procedural error on datacenter, but they are saying is not the case... I'm investigating, but if someone else has any idea about I would appreciate
thanks!
roberti

[SOLVED] Mailbox import requests stuck in 'queued' state

We have a small Exchange 2013 environment with one server having all roles. I try to import archive mailboxes from an Exchange 2010 environment. It has worked quite well for a while. However, all import requests are now 'stuck' in 'queued' state. Restart
of Replication service, transport service and even server reboot didn't help.
When I run
get-mailboximportrequest | Get-MailboxImportRequestStatistics -Includereport | fl
I observe that PositionInQueue value tells me that there are 85 import requests waiting :
ItemsTransferred                       :
PercentComplete                        : 0
CompletedRequestAgeLimit               : 30.00:00:00
PositionInQueue                        : 85/90 (Position/Queue Length)
InternalFlags                          : None
FailureCode                            :
There should be no requests waiting as I removed all requests in advance before I issued new import requests:
get-mailboximportrequest | Remove-MailboxImportRequest
How can I really reset an import queue by zeroing PositionInQueue ?
Any suggestions/tips?

Hi,
Glade to hear the good news. Thanks for your update.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

VM got stuck in "stopping" state, and cannot be stopped

Dear all,
I am using Oracle VM 3.2.2.
One of my VM got stuck in "stopping" state, and cannot be stopped.
How can I troubleshoot this problem...

Q: Is the VM still running, i.e. can you ssh to the VM?
Q: Find the server where the VM is running, and restart the ovs-agent, i.e. "service ovs-agent restart". Did this help, or is the agent crashed, any zombies?
Possible root cause: These type of errors are typically ovs-agent bugs. First update oracle vm manager to the 3.2.4 release, not 3.2.6. Next update the dom0s to 3.2.4, not 3.2.6. You may need to setup a ULN 3.2.4 yum repo to update the dom0s. As you can see in these forms, 3.2.6 is may not ready for prime time, stick with 3.2.4, is stable.

SQL Azure Data Sync stuck in Processing State since 5 Sep 2014

Hi,
I've a sync group stuck in "processing" state since 5 Sep 2014, have tried to restart the client PC, restarted the sync service and also tried to regenerate the sync agent key, but still in vain. Would anyone please help me to figure it out what's
the problem? As I have many sync groups running without any problem for more than a year and encountered this problem recently (in this 3 months).
Here's the sync group details:
Sync Group Name
ew_sync_a054
Status
Processing
LAST SYNC
9/5/2014 5:57:35 PM
Sync Group ID
94f34eaa-cf1c-4af0-950e-7aa565ccc781_East Asia
Location
East Asia
Subscription Name
Solo Customer Batch 2
Subscription ID
cda925fa-16c4-44b6-b3dc-8fc0cb82ad07
Conflict Resolution
Client Wins
Thanks for your help.
Best regards,
Michael Yung

Hi Bowen,
I've checked the local agent has been offline at 2014/09/05 18:00:00 UTC+8, as the shop close every night and they will shut down the computer, but they've turned on the computer in next day morning, and they keep turning that off at night, turn
back on at next morning.
I've checked the agent was online during that "stuck" period when the computer was turned on, as I could click the "PING SYNC SERVICE" and it reported it could reach the sync server, and I could also view from the portal that the agent
was online, just the sync group stuck in the "processing" status.
Best regards,
Michael Yung

Webengine stuck in RUNNING state - JavaFX 8.0.0

Similar Messages

Maybe you are looking for