WebEx Connect and MeetingPlace 8.0 WebEx Type 2
Look at that title...
Okay, we have MeetingPlace 8.0 with a WebEx Node on MCS server using Type 2 integration. This is working fine.
We also have WebEx Connect. This is working fine as well.
When we try to input our WebEx conferencing account info into Connect it fails with the following error:
WebEx service center sites with single sign-on (SSO) are not allowed.
I can't find any documentation on either Cisco's site or WebEx's site about this configuration. If it's not supported that's fine, I just want to know 100% that it isn't. So does anyone have any information about this configuration? Any help will be great.
Check if this link helps you or not: http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_configuration_example09186a0080b5d901.shtml#mp-webex-integration
Similar Messages
-
My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?
Then try DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Why is my Apple Wireless Keyboard connected and paired, but I can't type anything?
Hey,
I’ve been using Apple Wireless Keyboard (A1314) for a year now. Yesterday it stopped working. I can see it’s connected and paired, but I can't type. I tried unparing and pairing it again and sometimes it helps - I have no idea why, but once in ten attempts it works. When it works, though, some strange happen - like my Mac increases it’s volume level like I hit F12 on the keyboard.
When I go to Bluetooth menu battery level is hardly ever shown up. Also, when my keyboard is connected it takes a few seconds to open forementioned bluetooth menu.
So, it there change I will be able to repair it? It’s not like it costs $5. :cHello:
Try resetting the SMC.
Barry -
i can not open my i pad-1 and the device gave me message connect to iTunes and when connect the computer give me message type the password firstly i do not know what can i do ?
Is it disabled due to too many incorrect passcode attempts ? If it is then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
-
my i phone has a passcode onit so it will not allow me to connect to itunes my phone has froze and dosent allow me to type in my passcode what shall i do?!!!
Check here http://support.apple.com/kb/HT1808
-
Phone is connecting and transfering data in the ba...
Today at work my Nokia 6710 did start to transfer data in the background without my interaction. I was typing a sms while the symbol for data transfer below the 3G lit up. Did a quick check in the menu->settings->connectivity->Conn.mgr. Yes, one active connection was sending and receiving data, small amounts 3-4kb, then idle.
I ended the connection in the Conn.mgr. Closed all the apps in the phone and waited a minute. Then it started one new connection in the background again! Same procedure, checked and closed it...! This did not stop, every time the phone started a new connection after a minute?
I did try to find what could cause this, but no success. What is going on, any ideas for what to check?
I finally deleted my 3G access point in menu->settings->settings->connection->destinations->internet
This did stopp the phone from connecting and transfering data.
Back home I connected to my WiFi at home, used the browser and closed the connection. Guess what, the phone did now connect via the WiFi in the background doing exactly the same type of small data transfer - without asking!?
What is this? I downloaded the latest F-Secure mobile version to check for virus, but nothing, it was clean.
I did shut down the phone, will not use it until I can stop these unwanted connections and transfers. Please help.Finally I found the reason for these data transfers. The upgrade of the mentioned files did have something to do with all of this, but the removal of the files did not help.
So, I did go through all the settings in again for Connections and the setting for Share Video were set On...? Turning this setting Off did stop the background data transfers.
Problem solved perhaps. But I still wonder why the Share Video setting did start sending data while the phone was not in use? A bug? A virus? A hacker trying to activate the webcam? -
Posting to a URL connection and receiving a response...please help!
Ok, here's the deal. Im trying to connect to a site, submit my username and password, and then retrieve the HTML source code for the page after I'm logged in so I can parse it and further manipulate it. So far, I'm establishing a connection and posting the info I want, but when I print the DataInputStream at the end, I keep getting the source code for the log in page, not the page after I'm logged in...so I'm guessing I'm not really getting logged in at all. I put my code below, please tell me whats wrong!! I really appriciate any help you can offer.
-DFG
import java.net.*;
import java.io.*;
import java.lang.String.*;
public class URLReader {
public static void main(String[] args) {
try {
URL url;
URLConnection urlConn;
DataOutputStream printout;
DataInputStream input;
url = new URL ("www.someURL.com");
urlConn = url.openConnection();
urlConn.setDoInput (true);
urlConn.setDoOutput (true);
urlConn.setUseCaches (false);
urlConn.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
printout = new DataOutputStream (urlConn.getOutputStream ());
String content = "userid=" + URLEncoder.encode("username") +"&pass=" + URLEncoder.encode("password");
printout.writeBytes(content);
printout.flush();
printout.close();
input = new DataInputStream (urlConn.getInputStream ());
String str;
while (null != ((str=input.readLine()))) {
System.out.println (str);
input.close();
catch(MalformedURLException mue) {
System.out.println("exception");
catch(IOException ioe) {
System.out.println("exception");
catch(Exception e) {
System.out.println("exception");
}Suppose the target website has the following pages:
index.html (contains username, password fields and posts to login.html)
login.html (processes the logging and displays the secured data).
You should be posting the username and password to login.html. If so, I suspect that the login page you are posting to is not receiving the username and password and is simply outputting the login form again. Is this what happens when you open the url in a web browser and attempt to login with no username and password? -
Losing network connection and NIC acts weird from warm/hot weather/temperatures?
Hello.
Is there a known issue on MSI P43 NEO3-F (MSI-7514) motherboards' onboard RealTek RTL8168C (P)/8111C(P) PCI-E Gigabit Ethernet NIC network disconnecting and acting weird during warm/hot weather?
I noticed lately and back on 1/11/2009 night when weather got warm/hot (e.g., my room can get over 85F degrees, but lately it has been 80F degrees), my network would lose its connection. See http://img9.imageshack.us/img9/5580/screenshots.gif for a few SpeedFan's sensor readings when the incidents occurred. I have never seen this happen when the weather is cooler (60-70F degrees in my room).
I also think this only happens if I am using the PC lightly (nothing intensive) like watching fullscreen videos (video overlay), surfing the Web, etc. I don't see any errors or evidences that it happens when idled (e.g., asleep or out). Uptime doesn't seem to matter since I have seen days to 3.5 hours.
I tried upgrading network driver twice (e.g., Realtek_XP_5714_0219 from
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false ...), disabling Kerio Personal Firewall v2.1.5 (XP's disabled already), releasing and renewing IP address (works, but still no network -- can't even ping my router!), unplugging and replugging the cat5 cable (do see the network port lights on), touching the network jack and hardware inside and outside of the case (not hot), trying another cat5 cable and a network port on a switch instead router's), changing from "Minimal Power Management" to full power (no underclocking/slowing down when idled), etc.
During the disconnections, I tried:
C:\>tracert 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * ^C
IPCONFIG.EXE /ALL when having network problems:
Windows IP Configuration
Host Name . . . . . . . . . . . . : FOOBAR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.134.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.80.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter HDTV Tuner 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI #3
Physical Address. . . . . . . . . : 00-D0-D7-30-19-C1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:04 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:08 PM
Ethernet adapter HDTV Tuner 1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI
Physical Address. . . . . . . . . : 00-D0-D7-30-1A-1D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:21 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:25 PM
Ethernet adapter Local Area Connection 15:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-21-85-1A-C6-72
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.82
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
4.2.2.1
I checked Windows XP Pro. SP3's event logs and noticed these during the disconnections:
Event logs showed:
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 2/28/2009
Time: 6:42:23 PM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Information
Event Source: BROWSER
Event Category: None
Event ID: 8033
Date: 2/28/2009
Time: 6:47:22 PM
User: N/A
Computer: FOOBAR
Description:
The browser has forced an election on network \Device\NetBT_Tcpip_{89F40100-0D8D-4C33-A32D-3D91CAEB3FBD} because a master browser was stopped.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 3/1/2009
Time: 6:19:08 AM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 3/1/2009
Time: 6:19:20 AM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
I also noticed the disconnections usually start with red X icon in my taskbar with its bubble and then later the long disconnection even though no red X (1 GB and connected). If I were to disconnect the cat5 cable from NIC, then it wouldn't even detect it is missing the cable!
The only way to fix this was to reboot (best way and last longer) OR disable network connection and re-enable it (Windows XP's Network Connections) or the NIC itself (Device Manager), but that doesn't always last long (maybe a minute). Example of my pings right after disabling and re-enabling NIC:
C:\>ping 192.168.0.1 -t
Pinging 192.168.0.1 with 32 bytes of data:
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
MSINFO32 in case it helps (seems OK to me, but I am not a hardware expert):
[Conflicts/Sharing]
Resource Device
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003C0-0x000003DF ATI Radeon HD 4800 Series
IRQ 21 Intel(R) ICH10 Family USB Universal Host Controller - 3A38
IRQ 21 OHCI Compliant IEEE 1394 Host Controller
IRQ 21 TechniSat DVB-PC TV Star PCI
IRQ 23 Intel(R) ICH10 Family USB Universal Host Controller - 3A34
IRQ 23 Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
I/O Port 0x0000B000-0x0000BFFF Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x0000B000-0x0000BFFF ATI Radeon HD 4800 Series
IRQ 16 Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
IRQ 16 ATI Radeon HD 4800 Series
IRQ 16 Intel(R) ICH10 Family USB Universal Host Controller - 3A37
IRQ 16 Standard Dual Channel PCI IDE Controller
IRQ 16 Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42
IRQ 16 Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
IRQ 16 ASUS TV880 Video Capture (NTSC)
IRQ 17 Microsoft UAA Bus Driver for High Definition Audio
IRQ 17 Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
IRQ 17 Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Memory Address 0xD0000000-0xDFFFFFFF Intel(R) 4 Series Chipset PCI Express Root Port -
2E21
Memory Address 0xD0000000-0xDFFFFFFF ATI Radeon HD 4800 Series
IRQ 18 Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
IRQ 18 Intel(R) ICH10 Family USB Universal Host Controller - 3A36
IRQ 19 Intel(R) ICH10 Family USB Universal Host Controller - 3A39
IRQ 19 Intel(R) ICH10 Family USB Universal Host Controller - 3A35
IRQ 19 Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
IRQ 19 Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Memory Address 0xA0000-0xBFFFF ATI Radeon HD 4800 Series
Memory Address 0xFED90000-0xFED93FFF System board
Memory Address 0xFED90000-0xFED93FFF System board
I/O Port 0x000003B0-0x000003BB Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003B0-0x000003BB ATI Radeon HD 4800 Series
[IRQs]
Resource Device Status
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 16 Intel(R) 4 Series Chipset PCI Express Root Port - 2E21 OK
IRQ 16 ATI Radeon HD 4800 Series OK
IRQ 16 Intel(R) ICH10 Family USB Universal Host Controller - 3A37 OK
IRQ 16 Standard Dual Channel PCI IDE Controller OK
IRQ 16 Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42 OK
IRQ 16 Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A OK
IRQ 16 ASUS TV880 Video Capture (NTSC) OK
IRQ 17 Microsoft UAA Bus Driver for High Definition Audio OK
IRQ 17 Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40 OK
IRQ 17 Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC OK
IRQ 21 Intel(R) ICH10 Family USB Universal Host Controller - 3A38 OK
IRQ 21 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 21 TechniSat DVB-PC TV Star PCI OK
IRQ 19 Intel(R) ICH10 Family USB Universal Host Controller - 3A39 OK
IRQ 19 Intel(R) ICH10 Family USB Universal Host Controller - 3A35 OK
IRQ 19 Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20 OK
IRQ 19 Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26 OK
IRQ 18 Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C OK
IRQ 18 Intel(R) ICH10 Family USB Universal Host Controller - 3A36 OK
IRQ 23 Intel(R) ICH10 Family USB Universal Host Controller - 3A34 OK
IRQ 23 Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A OK
IRQ 20 Creative SB Audigy 2 ZS (WDM) OK
IRQ 22 TechniSat DVB-PC TV Star PCI #3 OK
IRQ 0 System timer OK
IRQ 8 System CMOS/real time clock OK
IRQ 13 Numeric data processor OK
IRQ 4 Communications Port (COM1) OK
IRQ 6 Standard floppy disk controller OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 12 Microsoft PS/2 Mouse OK
IRQ 14 Intel(R) ICH10 Family SMBus Controller - 3A30 OK
My detailed computer configurations can be found here: http://alpha.zimage.com/~ant/antfarm/about/computers.txt (primary computer).
Thank you in advance.Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post. -
"completion insight" and "change case as you type" won't work for sql file
Hi there,
Just updated to 3.1 on my Mac Lion. It's very likely a bug since it used the work with 3.0.
I have a "temp.sql" file where I store several queries. I start SQL Developer, open "temp.sql", connect to a DB but "completion insight" and "change case as you type" won't work anymore.
If I click in "Unshared SQL Worksheet", the new worksheet tab will work fine with completion and change case, but I want to use my temp.sql and save things there when closing the application.
To reproduce yourself the issue:
Open SQL Dev, connect to a DB (it will open a worksheet), do some queries and check that change case and completion are working, quit SQL Dev, but save the worksheet in a sql file before. Re-open SQL Dev and open the sql file. Connect to the same DB and try to change the queries or create another. Completion and change case won't work anymore.
About
Oracle SQL Developer 3.1.07
Version 3.1.07
Build MAIN-07.42
Copyright © 2005, 2011 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.59.48
Product ID: oracle.sqldeveloper
Product Version: 11.2.0.07.42
Version
Component Version
========= =======
Java(TM) Platform 1.6.0_31
Oracle IDE 3.1.07.42
Versioning Support 3.1.07.42Well, it's partially working, if your sql file is big (like mine), say with more than 1000 lines, then, maybe because of memory usage, the automatic completion won't work as expected, though, sometimes, after a while, crtl-space would stil work.
So, the problem may have been addressed, but I believe this feature can be definitely improved. -
so far i tried:
1. to set the windows firewall settings
2. I've reinstalled firefox
3.Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link} -
Photoshop CS6 crashes all the time and especially when using the type tool... please help!
Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Cinema HD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: 2A80273WXMN
Mirror: Off
Online: Yes
Rotation: Supported -
"you must first sign in to iTunes Connect and sign the relevant contracts": how?
I'm trying to get my iBook (made in iBooks Author) up on the iTunes store and am stuck.
I now have an iTunes Connect account into which I can sign in. When I try to use iTunes producer, and enter my login info (which works on the browser), it tells me
"There is a problem with your login information. To use this application, you must first sign in to iTunes Connect and sign the relevant contracts."
I'm not sure what a "relevant contract" would be. I look at "Contracts, Tax, and Banking" at iTunes Connect, and there is one entry with Contract Type "Book". However, I can't request it (that is grayed out), and the "Legal Entity" pull down does not show me (as found in the "Manage Users"), but only shows "select".
I therefore can't seem to find a way to do anything to allow me to login with my book via Producer to get it "produced."
Does anyone know what is going on?
The FAQ is a blank page, the "Contact us with questions" asks you to pull down a topic and has no topics there! Very clumsy path to publishing (comparing to CreateSpace, for example). After the ease of iBooks Author it's like hitting a brick wall at 100 mph.OK, I saw the link for the help video at the bottom - it helped. I have to add a new entity. I was fooled thinking I would already be there and that the entry was me, but it is apparently a general placeholder into which numerous entities can go. For me this was not obvious at all, and I only figured that out by watching the video (which was not easy to spot!).
I'll go through the process now and hopefully no more confusions. -
Connection and reconnection taking a lot of time
Hi ppl. I am on a POC with 5 machines plus the Active Directory on a Win 2003 server,
the vdi hosts and the storage server each of them reside on a LDOM (four in total) created
on one sparc blade on a sun blade 6000, each vdi has 4 gb of memory and the storage server
has 3 gb (ARC size is 2GB) and one zfs partition of about 60gb.
The xVM server was created in a LDOM on an x68 blade on the
same sun blade 6000. Solaris 10 U7 in all of them. VDI and virtualbox installed as per
installation instructions. All vdi servers has the AD as their ntp and dns server.
The user directory is working, connected and authenticated to the AD, we are able to search
for users from the web interface.
the problem: most of the time the vdi login screen appears after less than 30 secs, but
after entering a valid (or for testing, invalid) user/password, most of the time the "connecting
to vdi" screen is displayed for 1 or more minutes, after which it either falls back to the
vdi login screen or opens a the session or shows the two VMs to pick one. After selecting
one of the VMs or entering the previous session, everything works fast, inside the win
session, but then again, when we log out,disconnect or close the session, it takes for
anoter 2 or more minutes to get the VDI login screen again, it has taken up to 5 to 6 mins
to get to the vdi screens.
I dont find any related information on the cacao.0 logs, dmesg or /var/log/syslog log files,
the vdi web admin interface shows the VM taken by the user used in the vdi login screen,
also, just got kicked out of the vdi web admin with an error (will be posted on the next
message, what can we be doing wrong? what should we look at?
thanks in advance
-Oswaldoerror:
Error Details
Here is a full stack trace of the error:
javax.servlet.ServletException: javax.faces.FacesException: org.apache.jasper.el.JspELException: /jsp/pools/PoolDesktops.jsp(187,116) '#{PoolDesktopsBean.pool.vcDesktopProvider}' Error reading 'pool' on type com.sun.vda.admin.pools.PoolDesktopsBean
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:256)
at sun.reflect.GeneratedMethodAccessor147.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:267)
at sun.reflect.GeneratedMethodAccessor146.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:218)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
at com.sun.vda.admin.authentication.AuthenticationFilter.doFilter(Unknown Source)
at sun.reflect.GeneratedMethodAccessor56.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:218)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.valves.RequestFilterValve.process(RequestFilterValve.java:269)
at org.apache.catalina.valves.RemoteAddrValve.invoke(RemoteAddrValve.java:81)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.faces.FacesException: javax.faces.FacesException: org.apache.jasper.el.JspELException: /jsp/pools/PoolDesktops.jsp(187,116) '#{PoolDesktopsBean.pool.vcDesktopProvider}' Error reading 'pool' on type com.sun.vda.admin.pools.PoolDesktopsBean
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:675)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
at com.sun.faces.extensions.avatar.components.PartialTraversalViewRootHelper.invokeContextCallbackOnSubtrees(PartialTraversalViewRootHelper.java:596)
at com.sun.faces.extensions.avatar.components.PartialTraversalViewRootHelper.processDecodes(PartialTraversalViewRootHelper.java:234)
at com.sun.faces.extensions.avatar.components.PartialTraversalViewRootImpl.processDecodes(PartialTraversalViewRootImpl.java:145)
at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:101)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:117)
at com.sun.faces.extensions.avatar.lifecycle.PartialTraversalLifecycle.execute(PartialTraversalLifecycle.java:94)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)
... 54 more
Caused by: javax.faces.FacesException: org.apache.jasper.el.JspELException: /jsp/pools/PoolDesktops.jsp(187,116) '#{PoolDesktopsBean.pool.vcDesktopProvider}' Error reading 'pool' on type com.sun.vda.admin.pools.PoolDesktopsBean -
Connect to SAP gateway failed Connect_PM TYPE=B
Hi experts,
I get the following error when i ping through JCO destinations on portals.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=imtsapdev01 GROUP=CLUST R3NAME=DMI MSSERV=sapmsDMI PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '127.0.0.1:3310' not reached TIME Tue Jan 27 16:39:54 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2823 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
However my JCO destinations were working perfectly until recently. I checked on the logon group. I have one called CLUST, which i use for this purpose.
I have also checked both service files and they have the following for the ECC server im connecting to.
3610 because its system number 10 i am connecting to.
sapmsDMI 3610/tcp
From the JCE destinations screen i cannot even ping the server. I can though when i log on to the server through remote desktop.
thanks and regards
dilanke
as a reply to nishants posts.
goto rz70
give hostname -->
service --> sapgw00 (sapgw(instance number)
execute it
click on yes
check rfc call (success or failed)
I have done this. i left hostname as "blank" gave service as "sapgw10"
The following is what i got as the output.
0: IMTSAPDEV01_DMI_10 : Execute program: SLDRFC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDMSGSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDIPSERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSP
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDGWSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDDBSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCOMPSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCLIENT
0: IMTSAPDEV01_DMI_10 : Execute program: SLDBCSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDAPPL_SERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDASSOC
0: IMTSAPDEV01_DMI_10 : Collection of SLD data finished
0: IMTSAPDEV01_DMI_10 : Data collected successfully
0: IMTSAPDEV01_DMI_10 : RFC data prepared
0: IMTSAPDEV01_DMI_10 : Used RFC destination: SLD_NUC
0: IMTSAPDEV01_DMI_10 : RFC call failed: Error opening an RFC connection.
0: IMTSAPDEV01_DMI_10 : Existing periodic jobs removed. Number: 1
0: IMTSAPDEV01_DMI_10 : Program scheduled: 20090127 184357
1: IMTSAPDEV01_DMI_10 : Event-controlled job already exists; scheduling not necessary
so i guess its not successful. when i look at rz70 of a server where this works correctly its not succsessful either
if it is success then technical system name will be in sld
to restart sld --> /sld --> administration --> stop server --> restart server
or check in VA --> SLD data supplier value --> Runtime
I checked this and i do not see aa problem. you have configuration status as valid and send reult as Success
Services file is locted on OS level of R3 system--> Goto --> Start --> Run -> (type)Drivers(enter) --> etc -> (here is services file)
check ur r/3 server entry is there or not,
I have the followng in the service file for the server
sapmsDMI 3610/tcp
if not add itHi Experts,
when ilook at the remote gateway properties in SMGW this is what i see on the R/3 server. ive looked at my other system which i can connect to and there isnt much of a difference in the parameters. How can test this to see if it works?
Details of remote gateway
entry = 0
state = CONNECTED
local = 1
system type = REMOTE_GATEWAY
client = FALSE
wait for frag write = 0
suspended = 0
read/write socket = 4
HANDLE = 4
TIME = Sun Oct 19 18:54:14 2008
SOCKET = 1352
STAT = NI_CONNECTED
TYPE = STREAM IPv4
OUT = 48225 messages 48225 bytes
IN = 1 messages 64 bytes
LOCAL = 127.0.0.1:3310
REMOTE = 127.0.0.1:1297
OPTIONS =
connect = Sun Oct 19 18:52:17 2008
last request = Thu Jan 29 13:09:58 2009
conversation no = 0
thanks and regards,
dilanke -
Connect to SAP gateway failed Connect_PM TYPE=A
In past 4-5 days, some of messages are not processed in our XI production server.
I got the following error in the falied messages:
Seem to be some parameter need to be update for sap gateway.
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=dbcinpr SYSNR=15 GWHOST=dbcinpr GWSERV=sapgw15 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR connection to host dbcinpr, service sapgw15 timed out TIME Sun Oct 21 09:09:50 2007 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -12 MODULE nixxi_r_mt.cpp LINE 1067 DETAIL NiPConnect COUNTER 1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
Pls let us know if it is parameter related prolem or some other issue.
Regards
AmarHi Amar!
Test the status of the RFC destinations in transaction SM59 of XI and R/3 systems.
Also check this thread, I think they might be helpful:
Communication channel not working
RFC Receiver Adapter Error
JCO Destination creation error
RFC_ERROR_COMMUNICATION - time out
Reg Jco connections
RFC Adaptive Model,JCO destinations error
Regards,
Matias
PS: please award points if helpful.
Maybe you are looking for
-
I got a software alert update a week ago and allowed it to up. Had to close all apps so I left for a few hours. I came back turned system on and a grey login screen appeared and the hot keys were all lit unable to use the keyboard. Bought wireless ke
-
Is there a way to transfer music from my account to my daughter's new account?
I have been buying content for my daughter using my account for years. Now she is graduating and leaving home. Is there a way that I can transfer her music from my account to her new account?
-
Permanent low energy consumption mode in Lion
Hi, Is there a way to make the machine always work in low energy consumption mode, no matter how much workload there is, like pre Lion machine?
-
I am cutting a frame-relay with ISDN backup Network over to MPLS with DSL Backup - I want to use OSPF on the MPLS and EIGRP over DSL; I have a mixture of routers 1750, 1751, & 1760. I have been doing my DD but was wondering if anyone here has done th
-
Creating & Extracting R3 Hierarchy with MCK1
Hello Expert, I need some advice & How tos on creating a General hierarchy with MCK1 and extracting those into BW. Is there any other better way to create General hierarhy in R3 and extracting into BW Thank you Arun