WebEx is not displaying the elapsed time.

When watching a Webinar using WebEx with Safari or Chrome the elapsed time is not displayed in the block in the lower left hand corner of the screen. It is on my older Macbook Pro. I have talked to Apple support and Webex support and each blamed the other after a good faith effort. Clearly it is a difference between the operating systems. What can I do?

I am using 10.10.3 not the version listed.

Similar Messages

How can I display the elapsed time of the course using Advanced Actions in Captivate?

I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
EXAMPLE:
25/35 minutes complete
The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
Can anyone provide guidence regarding how I should structure this differntly?

I talked about that Timer widget in that blog post and pointed to another one:
http://blog.lilybiri.com/timer-widget-to-stress-your-learners
If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions

How to display the elapsed time of a video (event video) in Captivate 6

I have a Captivate 6 project which includes two separate videos and I am wondering how I can display an elapsed time for the videos - preferably one that stops if the individual stops the video.

Hello and welcome to the forum,
Are you talking about an inserted video, or about the Captivate file itself? I'm asking this because a lot of users refer to a published CP-file as a video.
'Elapsed time': is this the real time spent by the user, or the time as you can see in the TOC (developer's time)? I blogged once about the difference.
Lilybiri

Web graphic is not displayed the first time

Hi all
I have a strange issue with some users. The first time that they run the qry in the web, the chart is not diplayed, only is displayed a big "X" and the error msg is the msg below; but when they refresh, the chart is displayed ok.
How can I solve it?
Web application processing terminated
Diagnosis
The system had to terminate processing of the Web application.
The reason could be that the system was no longer able to find the Web application server session.
System Response
Processing the navigation step is not possible.
Procedure
Call up the Web Application again.
Note: Use the start URL and not the URL that is currently displayed in the Web Browser.
Procedure for System Administration
Notification Number BRAIN 278
Thanks in advance!

From HTML pass to jsp with post, then from jsp pass the same data to another jsp with parameter attached to the file URL, so method is "get":
top.location="../filename.jsp?path="+path;

Calander is not displaying the database time.

Hi,
I createda text field and attached a date picker with date and time to it . The calender that appers beside the field is showing 4 hours ahead. From SQL commonds if I querry sysdate, I am getting the correct time. When I tested at the another installation of a colegue I got correct date and time. I guess the problem is with installation of APex with TIme zone or so. But the DBA says there is so such option. Can you find where the problem is?
thanks

"user583065",
You may wish to apply the APEX 3.0.1 patch set. One of the issues fixed in this patch set is 6067589, which now defaults the session time zone to the OS-derived time zone and no longer DBTIMEZONE:
http://www.oracle.com/technology/products/database/application_express/html/3.0.1_readme.html#CHDCBDAF
If you look at the news here:
http://www.oracle.com/technology/products/database/application_express/index.html
You'll see how to get the APEX 3.0.1 patch set.
Joel

The world clock on my IPOD touch is not telling the correct time

My IPOD touch world clock is not displaying the correct time and the edit feature is not working to change the time

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

Ibook g4 that does not display the battery meter, sound volume, tim

I have an ibook g4 that does not display the battery meter, sound volume, time & day.When i move cursor over the area where they should be I see a spinning beach ball beach ball

Choose Go to Folder from the Finder's Go menu and enter ~/Library/Preferences/ as the folder's path. Locate the item named com.apple.systemuiserver with or without a plist at the end, and drag it to the desktop.
(10471)

Direct Path Read waits are not showing in Elapsed time

Hi,
I'm having a question regarding interpretation of a SQL trace file. I'm on Oracle 11.2.0.1 HP/UX 64 bit.
Following is only the overall result of the trace (it is quite big).
My question is about the Direct Path Read waits which are totallizing 268s of wait but are not showing in the fetch elapsed time (49.58s) and are not showing anywhere in the trace except in the overall result.
I do not understand why it is not part of the Elapsed time...
For info, the trace is for the specific session that was performing all the required queries to display an online report. The database is accessed by the Java application using Hybernate.
The trace was obtained by the following SQL:
exec sys.dbms_monitor.serv_mod_act_trace_enable(service_name=>'SYS$USERS',waits=>true,binds=>true);Then I query the sessions to find the one created by the application.
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       36      0.43       0.51          0          5          0           0
Execute     62      0.01       0.01          0          0          0           0
Fetch      579      4.01      49.06       3027     153553          0        5516
total      677      4.45      49.58       3027     153558          0        5516
Misses in library cache during parse: 29
Misses in library cache during execute: 2
Elapsed times include waiting on following events:
Event waited on                             Times   Max. Wait Total Waited
----------------------------------------   Waited ---------- ------------
SQL*Net message to client                   32754        0.00          0.03
SQL*Net message from client                 32753        2.33        232.01
Disk file operations I/O                      179        0.00          0.02
db file sequential read                      2979        0.54         45.72
SQL*Net more data to client                133563        0.04          5.30
direct path read                            34840        0.94        268.21
SQL*Net more data from client                1075        0.00          0.02
db file scattered read                          6        0.03          0.11
asynch descriptor resize                       52        0.00          0.00
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       25      0.00       0.02          0          0          0           0
Execute     58      0.05       0.04          0          0          0           0
Fetch      126      0.00       0.04          4        161          0         123
total      209      0.05       0.11          4        161          0         123
Misses in library cache during parse: 3
Misses in library cache during execute: 3
Elapsed times include waiting on following events:
Event waited on                             Times   Max. Wait Total Waited
----------------------------------------   Waited ---------- ------------
Disk file operations I/O                        1        0.00          0.00
db file sequential read                         4        0.01          0.03
asynch descriptor resize                        1        0.00          0.00
   37 user SQL statements in session.
   57 internal SQL statements in session.
   94 SQL statements in session.
Trace file: oxd1ta00_ora_16542.trc
Trace file compatibility: 11.1.0.7
Sort options: default
       1 session in tracefile.
      37 user SQL statements in trace file.
      57 internal SQL statements in trace file.
      94 SQL statements in trace file.
      57 unique SQL statements in trace file.
241517 lines in trace file.
     568 elapsed seconds in trace file.Thanks
Christophe

Christophe Lize wrote:
Closing this thread even if it's not answered...Sorry, I don't have time to test this myself now, but you shouldn't mark this thread as answered if it is not, because other people might find it and think they find an answer if they have a similar question.
I suggest you try the following to narrow down things:
1. Open the RAW trace file and check the cursor numbers of the "direct path reads" - check if you can find any references for those cursor numbers manually. The cursor numbers are those numbers behind the WAIT #<xx>, and you can check if you find any other entry unequal to WAIT #<xx> with the same #<xx>, for example EXEC #<xx> or FETCH #<xx>
A short primer on how to interpret the raw trace file can also be found in MOS document 39817.1
2. Run the RAW trace file through alternative free trace file analyzers like SQLDeveloper (yes it can process raw trace files), OraSRP or Christian Antognini's TVD$XTAT. If you have My Oracle Support access you can also try Oracle's own extended Trace Analyzer (TRCA / TRCANLZR). See MOS Note 224270.1
Check if these tools tell you more about your specific wait event and oddities with the trace file in general.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
Co-author of the "OakTable Expert Oracle Practices" book:
http://www.apress.com/book/view/1430226684
http://www.amazon.com/Expert-Oracle-Practices-Database-Administration/dp/1430226684

My IPhone 4's mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. What is wrong with it?

My work recently decided to buy every full time employee an IPhone 4 to be used for work purposes. (I do suspect these are refurbished, but I don't think that matters) I have had no trouble with it, except for on occasion the mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. You know what I'm talking about...that bar at the bottom of the mailbox when you open an email that you use to delete, respond, forward, move, etc. It just goes away for no reason, and then reappears for a day or two, and goes away again. It is quite annoying since I can't respond to any of my emails without getting on my work computer. If you have any suggestions, please help!

Hi there,
You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Hope that helps,
- Griff W.

Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin Nambiar

If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to display the current time in a UIX page

Hi All,
another UIX question....
A requirement of a customer is to display to current data and time in every page.
It should be done in a <header>. So i'm writing a new (template based) renderer for that element. How can i display the current time and date on it?
Thanks in advance for any help...
Regards,
Robert Willems

Hi Robert -
When you say you are writing a template-based Renderer, do you mean that you are creating a custom look and feel and replacing the header Renderer? If so, I'd recommend instead simply creating your own template (not template-based Renderer), and reference your template directly from your uiXML pages where you want to insert the timestamp.
You'll probably want to write a method data provider which calls System.currentTime(), convert the result to a date, and then use Java's date formatting capabilities (see java.text.format.DateFormat) to produce a user presentable String that you can return from your data provider.
For more info (and samples) on templates and data binding, see the "Templates and Data Binding" section of the "Includes and Templating in ADF UIX" help topic:
http://tinyurl.com/5b7bf
Andy

Some PDF files and other emails do not display the whole page. Is there a way to change that?

Some PDF files and other emails do not display the whole page. Is there a way to change that?

If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

ICal will not display correct "event" times

Have iMac (21.5-inch, Late 2012), OS X Yosemite (10.10 ) and iCal app suddenly will not display the correct Event times that I have designated in the little pop up box? Any ideas about what I can do to reset iCal or fix this annoying error in the app?
Thanks!
Marilyn

Hi,
Have you tried turning it off in iCal's Preferences and then back on again?
Best wishes
John M

When using historical datalogging, is it possible to hide the elapsed time between tag updates when viewing on a graph?

When my process stops, I am reading an array of tags(datapoints) and writing the max and average to memory tags for data logging. However, when viewing the data, the elapsed time between cycles spreads the data out unevenly. It could be 90 seconds between cycles or maybe two hours or longer. Is there a way to convert the time axis data to be just consecutive datapoints?? It would be like logging data based on a particular condition happening rather than time-based trending. Should I try to use the data set logger examples instead?? I would prefer to use the built-in datalogging features rather than writing to databases.

You could export your data to a spreadsheet file and then actually write then again in a second database using this example program in the devzone
http://zone.ni.com/devzone/conceptd.nsf/webmain/5A921A403438390F86256B9700809A53?opendocument
Using this program (if you don't want to modify it, which would take a reasonable amount of time specially if you are not familiar with VI-Based Server) You would have to generate a collum in your spreadsheet file to be the timestamp, it would be a artificial timestamp.
What you could do in your application is to first save the data to file and then read from file, substitute the collum timestamp for the "artificial one" and then write it to the database, again, with that you would not need to modify this program.
However if you have the time and is willing to work with VI-based server you could try to modify the example program to be adapted for your purposes.
I hope it helps
Good Luck
Andre Oliveira
Applications Engineer
National Instruments

WebEx is not displaying the elapsed time.

Similar Messages

Maybe you are looking for