Webflow basis configuration - how to?

Hello all,
i have to configure a Netweaver system in order to keep WebFlow work properly and to send/receive XML messages to Lotus Domino. Because, i'm not located in basis services (i'm ABAP and Workflow developer), this is absolute new for me
Can anyone explain to me, which adjustments have to be made in transaction SICF (service configuration) and SWR_WEBSERVER (WebFlow configuration)?
R/3 documentation describes only, that the Kernel must be configured as Webserver, but not, exactly how to do this.
Thank you in advance for the answers!
Best
Jens

hi Jens
you need to carry out the following steps:
1. go to txn RZ12 and maintain a server group over there.
2. Go to transaction SICF and maintain SAP connector over there makes sure that the connector is active and is having all other configurations made in a proper manner.
3. Go to T-Code SCOT and maintain SMTP server node.
4.Go to the T-Code SOSB and verify that the mail notification is sent to the external email id.
5. after doing all this configurations go to Txn SWU3 and maintain webservices properly.
If you need i will send a document about all these configurations which has screenshots too, jsut send me your email id .
Hopefully this will help you.
Cheers
Saurabh Anand.
PS: Please award points if it helps you.

Similar Messages

  • I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    try
    http://support.apple.com/kb/ht2589

  • I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

    I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • In xcode i deleted my default.png file and know my app says 0 target and missing base sdk how can i fix this please

    please help mw fix my app i deleted my default .png file the one that displays an image when u first run the the and after i deleted my app wont run and says at the very top 0 target , missing base sdk. how can i fix this please help.

    hello , i did exactly the same thing , and my app store icon look like this :
    http://i.imgur.com/FIrph.png
    so can you tell me how did your friend send the app store for you? please

  • HT3702 I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authoriz

    I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authorize?

    You possibly set up an auto-renewing subscription with the app - there are instructions on this page on how to manage them, including how to stop them : http://support.apple.com/kb/HT4098

  • What are the basic element of Base configuration of an oracle Database ?

    What are the basic element of Base configuration of an oracle Database ?

    889543 wrote:
    What are the basic element of Base configuration of an oracle Database ?check this link
    http://www.dbnest.com/entry/194/
    and if you want to configure oracle installation click below link .
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/install002.htm
    --neeraj                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • BASIS query :how to transport user roles

    BASIS query :how to transport user roles
    regards
    Mave

    Hi Mave,
    Pls follow this
    Goto PFCG
    Enter the role there.
    On the application toolbar you can find the button for transport. Click on that and assign this to a transport request
    Release and transport to the other system.
    Cheers
    Vinod

  • NI PXI/PCI-1428 base configuration

    Hello,
    I am using the NI PXI/PCI-1428 board. I am sending a camera link video (coming from an FPGA) to the frame grabber. I have been trying to create a custom camera with the camera file generator program, but it only gives me the medium configuration option. Therefore, when trying to acquire video, it gives me the 0xBFF60022 timeout error. It is because it is expecting video in medium configuration and i am sending it in base configuration.
    The Ni 1428 board clearly supports base configuration.
    Any clue?
    Thank you

    I suspect it has to do with your image size.  Try a smaller image.
    You can also edit the file manually once created, using notepad.
    Machine Vision, Robotics, Embedded Systems, Surveillance
    www.movimed.com - Custom Imaging Solutions

  • Emca configuration/ How i can drop existing emca and recreate it?

    emca configuration/ How i can drop existing emca and recreate it?

    Hmmmm?
    emca is the program used to create/drop/update the em configuration. Not sure why you want to drop emca.
    If you want to drop and recreate the em configuration, have you tried "emca ?" or "emca help=y"

  • BASIS Configuration needed to send an external mail from SAP Program

    Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
    Regards,
    Subhasish

    Hi Subhasish,
    Please go thru the below link.
    Re: SCOT Configuration--for external mail
    Regards,
    Lakshman.

  • Where To Download Base Configuration ISO(s) For Test Labs?

    Hi.
    Is there somewhere that I can download an ISO for the base configuration for the Test Labs outlined here:
    http://social.technet.microsoft.com/wiki/contents/articles/1262.test-lab-guides.aspx#Base_Configuration_TLG
    Or is it presumed that the reader of the Test Lab Guides will configure each machine themselves?  If so, why is this not communicated clearly in the Test Lab guides?

    Hi,
    Test Lab Guides is to let you use less to learn a new technology, product or an entire multi-tier solution, TLG provides you with step-by-step instructions to create the Base Configuration test lab. You could build test labs based on other
    TLGs from Microsoft and published in the TechNet Wiki, perform TLG extensions, or create a test lab of your own design that can include Microsoft or non-Microsoft products.
    For more frequently asked questions about Microsoft TLG:
    http://social.technet.microsoft.com/wiki/contents/articles/2477.test-lab-guides-faq.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Configure how long a automatic activity  can run before timeout

    I have a long running job in this step. Can I configure how long that automatic activity can run before it will time out. How do I configure this when running in the BPM Studio and when deploy the apps to the server?
    Alternatively, I was try to use a SecureShell to run a unix job with nohup but somehow it doesn't execute properly and the shell would exit out but the script would not run. When I run the same nohup command line in the external host, it does run properly. Is there any special way to call nohup through SecureShell.
    Thanks,
    Wing

    You can define the timeout of the BP-Methods that is actually the value that should be used for the method in your automatic activities. This is configured into the Engine preferences and it's the Maximum BP-Methods+ Timeout parameter, both for the studio and the enterprise.
    Remember to handle the timeout exception when using this parameter. If not correctly handled, your process will abort.
    HTH
    Giuliano

  • I have lost the red firefox tab in the upper left corner and now have a different configuration how can i return to the standard layout?

    i was having trouble syncing my iphone the sync button did nothing under the red firefox menu somehow i got a different configuration which reads file edit history bookmarks yahoo tools help found sync now under tools but have no clue as to how to return to the layout depicted in your tutorials

    Right-click on a toolbar, then click on the "Menu Bar" entry to de-select it. That will hide the menu bar and bring back the Firefox button.

  • Duplicate check via BAS (ADDRESS_SEARCH)-- how to handle non-crm customer?

    Dear all,
    I'm implementing a duplicate check and using the BADI Address_search. Within this BADI I use the method "Address_Search" for calling a third party software tool with customer information. This tool checks whether the entered customer is already available in CRM AND in other system in our company holding.
    The method provides me a list of all found duplicates (incl. non-crm customers)
    My problem is that I need to fill a export table "ex_t_search_result" (type adkey_indx_tab) of this method which expects ADRC number. For the CRM customer it is not a problem. I can figure them out by table BUT020 and the customer number. But for the non-crm customer I do not have a ADRC number.
    I know there are some methods for creating addresses in BAS (function group SZA0), but actually Im not sure how to handle them.
    Does anybody of you had faced a similar issue?
    Thanks for your help
    Firat C.

    hello,
    BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
    br,
    dez_

Maybe you are looking for