Webform submit not sending info and redirecting to blank white page?

On this page:
http://www.creativeimage.com/hire-us.html
We were able to send the form and collect the information on the back-end with relatively no problem, aside from slow loading time on all our computers. After a few times, we find we're not able to sucessfully submit the form. We get redirected to a blank page and no information is collected on the back end. I'm thinking it has to do with our IP address, but it's weird that there's no mention of an error, and weird because we have the captcha set. Is anyone else having this problem? Or rather, does anyone know what's going on?

Hi,
It could be some sort of conflict within the custom form and it's form action or scripts within the template.
I recommend creating a new blank page (w/o template) and inserting the form fresh to see if working. This can help pinpoint what might be causing this and where.
Kind regards,
-Sidney

Similar Messages

My blog will not load--it gives me a blank white page.

If I type in my blog's URL I can see it fine. But if I try to login or search on it or go into the archives, it gives me a blank white page. Not an error code. Just a white page. I can see my favicon in the address bar.
I've tried it on FF and Safari. Same thing happens. I've tried it on other computers and the same thing happens.
I have asked my host to look into it, they don't know what to do. I asked my ISP about it and they said it's probably browser issues.
I looked thru all the help forums and altho' some people have this same problem not one of them had it resolved.
HELP.
a

In your WordPress administrative panel, try deactivating the WP Super Cache plugin to bypass any problems with cached pages. Similarly, scrutinize your other plugins to see whether any of them are not absolutely necessary, in case there is a conflict.
Then clear your Firefox browser cache and try again.
Firefox > Preferences > Advanced > Network > "Clear Now"
Any difference?
Edit: Oh... if you cannot log in, then it's hard to administer plugins, isn't it. You might need a WordPress doctor to explain how to make changes using an FTP client or your web host's file manager.

I am using an apple ipad 2. has always used facebook on it since the first day I purchased it. I started to use it last evening, 01/19/14 and received a blank white page on facebook..at the top it shows ipad with wifi running, time in the middle and amou

I am using an apple ipad 2, have always used facebook on it since I purchased it. now, tryig to open facebook, I receive only a white blank page. the only thing is that at the very top, it shows ' ipad with wifi running middle -- time and at the right end.. the battery amount. then my my white page. I am not understanding?

Quit the Facebook app then reset the iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Export Next Page Zoom and Search Issues - blank/white page freezes report

I'm using a vendor product that uses Crystal Reports Viewer for .NET v13.0 on a 64-bit windows 2008 server.
Everthing works fine in the vendor's environment but when I installed it on my servers when I try and Export, click next page, zoom or search I get a plain white overlay over the normal UI and it freezes the report.
Specifically if I click the export icon for a split second I can see the export dialog show up but it's immediately covered up by a white page that is the same size as the export dialog. The rest of the report is shaded gray as normal but it freezes that way. If I click on the gray area then hit ESC it goes back to normal, but I can't export anything.
Same basic behavior when I click Next or try and search for text. A small progress window shows but is white only then, I can't hit ESC and have to close the report out.
With zoom if I click on the zoom drop-down I see the zoom choices for a split-second but it's again covered over by whiteness.
I've searched through this forum quite a bit and can't find any similar issues. I can see all other graphics just fine and this same server was working fine with the 2008 version in the past. Are there any temp directories or special permissions required?
Thank you!
Tony.

Hi Tony,
If it is an install issue there should be a log folder that may indicate if there was a problem.
They really need to dig into the problem, if they have questions pass them along or if they have support with us they can create a case to help debug the issue.
You may want to search hear also, there have been a few post on this question but not sure what the results are.
Thanks
Don

Can Not send pictures and documents with my webmail, the link is Not visible on Safari Browser

Hello, i can Not send pictures and documents wit my tele2 webmail, the link to so this is Not visible. I tried Safari, Opera, and Dolphin.

Safari doesn't support the attaching/uploading of files. If you want to send documents or photos that you have stored on the iPad then you can use the Mail app - if you've set up your email account on it, then you should be able to start in the app that contains the document, and then use that app's functionality to select the document and attach it to an email e.g. in the Photos app you can use the icon of the box with the arrow coming out of it to select and email a picture

When I want to DL an app and after I enter my ID and password , DL starts . But then a message shows up and want me to verify my payment info. And redirects me to that page . Every thing I do on that page it doesn't work and then I can't DL.

When I want to DL an app and after I enter my ID and password , DL starts . But then a message shows up and want me to verify my payment info. And redirects me to that page . Every thing I do on that page it doesn't work and then I can't DL.

Do this on your iTunes program on the computer instead. Your Credit Card used on the profile is probably maxed.

Open popup window and redirect user to home page in sandboxed solution

i've created a sandboxed solution visual webpart and it has submit button so when user fills the information in the text boxes availble in webpart and clicks submit button so I want to open popup button containg success message and ok button so when user
clicks ok button in popup window i want user to be redirected to the home page of the site.
i tried to open popup and showed success message by below code
string gotohomepage = "http://sp2013:1111/Pages/home.aspx";
ScriptManager.RegisterStartupScript(this, this.GetType(), "message", "alert('Your Record has been submitted successfully,you will be redirected to home Page shortly');location.href =
'" + gotohomepage + "';", true);
but it's not opening popup window can anyone help how do i open popup window and redirect user to home page in sandboxed solution

Page class and script manager are not supported in sandbox solution
You can create model popup to achieve this
below are the reference links
http://blogs.msdn.com/b/chaks/archive/2011/09/14/modal-dialog-box-in-sharepoint-sandbox.aspx
http://social.msdn.microsoft.com/Forums/en-US/9427db4d-60f2-4b2a-8db6-b50d01ac4f23/how-to-create-modal-popup-using-sandboxed-solution

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

Firefox not displaying buttons and boxes when allow other pages to use their fonts instead of my selection is selected

Firefox not displaying buttons and boxes when allow other pages to use their fonts instead of my selection is not selected. The irritating thing is that Firefox used to display pages until FF 31. Please fix this
Thanks
Randy

The missing icons are supplied by a font that is downloaded from the server (@font-face) as you can probably see by little boxes that show the hex code of the characters.
You will have to make sure that you allow pages to choose their own fonts to see such an icon font.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Epson scanner and image capture: blank white image

I've been trying to make an epson perfection 1670 scanner work on an iMac running 10.6.4
Since epson no longer specifically supports this model I am going to Image Capture and the epson drivers supplied by Apple. I have downloaded/installed the updated drivers twice (once via software update and once manually from apple support).
I can get image capture to recognize the scanner and perform preview and full scans.
The frustrating thing is that the image generated is completely blank; a white page. I have tried using the scanner and image capture on two other mac's (macBook pro, macBook) both running 10.6.4 and both of these produce the same white page (although they do recognize the scanner).
I thought the scanner may have finally broken so i tested it on another (old) iMac G3 running os x 10.4.11 and epson's scanning utility; it worked fine and made a nice scan.
I have tried to get epson's scanning utility to work under 10.6.4 by reinstalling it; I can get it to startup and run the scanner but it too produces a blank white image!
I conclude there is some basic software incompatibility between the drivers and os x 10.6.4. Its odd that the drivers and image capture can run the scanner but cannot send an image to the computer.
The epson driver in the latest apple update is version 5.2.5 (Copyright 2003 ???) while the latest driver on the epson site (for image capture) is 5.3. Tried to download the epson driver and got file not found (*!%#?&).
done what I can; any suggestions?

I had the same problem with my Epson 1260 scanner. The "updated" drivers provided by both Apple and Epson produced the exact same result - blank white pages, or if anything showed up at all, it would be all chopped up and skewed, like it had gone through a shredder. Trying to adjust the brightness and other slider settings made no difference.
After wrestling with it for a week, I finally found a solution. First make sure Rosetta is installed. Use the old PowerPC Epson TWAIN driver from 2003; with the filename EPSON TWAIN 5.ds. Put it in the folder /Library/Image Capture/TWAIN Data Sources/.
Then, don't use Image Capture. Download Graphic Converter. Set it to open in Rosetta mode. Then you can use Graphic Converter's File -> Acquire -> TWAIN Acquire... menu command to scan using the old EPSON TWAIN driver.

Iceberg reader will not load fully, it comes up with a blank white page. What can i do to read my books?

Iceberg reader will not load fully, it comes up with a blank white page. How am i ment tonread my books?
If not is there anyway i can get a refund to buy the books on ibooks?

Soapie wrote:
Iceberg reader will not load fully, it comes up with a blank white page. How am i ment tonread my books?
If not is there anyway i can get a refund to buy the books on ibooks?
The only Iceberg app I can find in the app store is a social networking app, not an e-reader. I don't see how you could buy books for it.
UPDATE: I see that it isn't available in the US app store. To contact the developer find it in your App Store and there will be a link to the developer's support site.

Yesterday I downloaded something called babalon, today my computer was movng slow so I deleted babalon and something called safari, and now I dont have bookmarks on foxfire just a blank white page. I do I reverse and back my book marks

I deleted Babylon after installing it yesterday, and deleted safari not knowing what it was and now I dont have my bookmarks, just a blank whit page. How do I restore all back to before?

Get an external hard drive at least the same size as your internal hard drive, bigger is better. Use Time Machine to back up your files and applications. Once you've done that Start your computer from your original install disc, erase the hard drive and reinstall the original OS X and applications that came with your computer. Then start up using your Snow leopard install disc and upgrade the system to 10.6, run software update to get to 10.6.8 and restore your files and applications from your Time machine backup. Continue to use Time Machine to back up your computer regularly.
Apple's software will generally serve you well for everyday tasks like browsing and email, counting on unproven third party software to do the same tasks sometimes can give you headaches.

HTML5 Publish Not Working On iPad - Blank White Page

I have the most current version of Captivate 6 (6.0.1.240) and have a simple single slide project using the green theme that produced a blank white page on iPad and iPhone. I publish it clicking the SWF and HTML5 options and the multiscreen.html link works fine on my laptop (Windows 7 Pro 64 bit) in all major browsers but produces a blank white page on iPad. The iPad iOS version is 6.0.1. All the YouTube based "how to's" show it working without issue and without any special settings or setup. Any help would be greatly appreciated.

Don't believe the hype that html5 will replace Flash any time soon. It's not even half baked yet, at least, not for our purposes. It's not that they don't know how to do it; they just want more milk. And, with all due respect, you must be too naive to believe anything you view on YouTube; but you may want to check this out.
http://html.adobe.com/edge/phonegap-build/?sdid=KAPIP&skwcid=TC|22173|phone%20gap||S|b|19887958843&ef_id=UMrbOwAABPDoCr@1:20121214075435:s

My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Blank White pages will not delete

Help please if you can! I am making my first A3 photo book and love so many features that are offered. However I have a big problem that I cannot seem to fix. There are about 10 blank / white pages that I cannot delete - they are stuck! If I click the minus ( - ) button I get the message asking if I am sure I want to delete, I say yes, and then nothing happens. The pages all say "Insert Text" on them. If I try to turn them into a new page with pictures as layout then that adds a NEW page instead of replacing the white page. I have tried everything I can think of and cannot get rid of these.
Please help?!

Hi Caz - I had the same "can't delete or change" hyperlink problem. Fortunately for me is that I discovered the answer at the beginning of my project (I think you have some major complaining to do to Adobe about your situation).
Anyway, when first creating hyperlinks, you *MUST* be very very careful.
The "shared hyperline destination" checkbox MUST be checked. If it isn't, you are screwed.
To edit or delete those hyperlinks, you MUST have the Hyperlink dialog box open. If you can't find it, go to your main file menu, select WINDOW > Interactive > Hyperlinks.
That window will show hundreds of your listed hyperlinks.
In your text, click in the hyperlink you want to edit or delete. The resulting hyperlink "name" will be highlighted in the Hyperlink dialog box. From there, you can edit or delete.
Now, you might have to completely re-work your document (oy!), but at least, you will not make the same mistake again (oy! oy!).
InDesign has a bug that I just reported - although you can seemingly link to a file, it saves the information using escape characters in the filename path, which makes opening the file (at least on a PC) impossible. I have to edit every single pathname in Acrobat! Adobe better get back to me QUICK on this bug report because it is major, major, major!
We purchased InDesign to create beautiful linked PDF files - we could have just worked in Microsoft Word, but noooooo, we decided that InDesign offered so many wonderful features it was worth the investment. Who'd a thought they would have screwed up on the whole hyperlink thing. The programmers should have been shot for not making the "shared hyperlink destination" required and hidden from view.
Karen Little

Webform submit not sending info and redirecting to blank white page?

Similar Messages

Maybe you are looking for