Webgate not registered issue
All,
Have a clustered environment for oam/oim 11.1.1.3 stack integrated and all working till recently. One of the OAM servers is throwing the error below (the other one in the cluster works fine). Any ideas to debug this is very helpful.
Thanks in advance,
Prasad.
[2011-09-26T11:23:14.933-04:00] [wls_mproam1] [ERROR] [OAM-04030] [oracle.oam.proxy.oam] [tid: NioProcessor-1] [userId: <anonymous>] [ecid: 0000JAaL5ha4UsDpR8h8id1EW9Y6000006,0] [APP: oam_server] Partner looup failed. Partner id {0}[[
oracle.security.am.proxy.oam.requesthandler.OAMProxyException: Partner STGMPROHSWebGate not registered
at oracle.security.am.proxy.oam.util.PATAdapter.getPartnerInfo(PATAdapter.java:104)
at oracle.security.am.proxy.oam.requesthandler.ObAAAServiceServer.GetClientAuthentInfo(ObAAAServiceServer.java:130)
at oracle.security.am.proxy.oam.requesthandler.RequestHandler.ObAuthenReqChallengeHandler(RequestHandler.java:445)
at oracle.security.am.proxy.oam.requesthandler.RequestHandler.handleMessage(RequestHandler.java:183)
at oracle.security.am.proxy.oam.requesthandler.ControllerMessageBean.getResponseMessage(ControllerMessageBean.java:75)
at oracle.security.am.proxy.oam.requesthandler.ControllerMessageBean_eo7ylc_MDOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.MDOMethodInvoker.invoke(MDOMethodInvoker.java:35)
No the webgate is not listed in OAM console. Is anywhere else we can see reference of this webgate likw outpu folder
Similar Messages
-
CME SIP issue - Cisco 7821 phone not registering
Hi
I am having issues with getting a Cisco 7821 phone to register.
Current deployment is with Cisco 6921 phones SCCP registration
SIP integration with CUE
SIP integration with Mitel system
c2951-universalk9-mz.SPA.154-3.M1.bin (CME 10.5)
In flash:
rootfs78xx.10-1-1SR1-4.sbn
kern78xx.10-1-1SR1-4.sbn
sboot78xx.10-1-1SR1-4.sbn
sip78xx.10-1-1SR1-4.loads
The 7821 phone gets IP address but fails to register. Please could somebody let me know why phone is not registering.
Configuration below (10.245.226.132 is CME address) .
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol pass-through g711ulaw
modem passthrough nse codec g711ulaw redundancy maximum-sessions 5
h323
sip
registrar server expires max 600 min 60
options-ping 90
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
voice register global
mode cme
source-address 10.245.226.132 port 5060
max-dn 30
max-pool 10
load 7821 sip78xx.10-1-1SR1-4
authenticate register
authenticate realm all
timezone 22
date-format D/M/Y
voicemail 590
tftp-path flash:
create profile sync 0061443538560005
network-locale GB
voice register dn 1
number 1010
name user1
label user1
mwi
voice register pool 1
busy-trigger-per-button 2
id mac F09E.636E.63F2
type 7821
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username 1010 password 123
codec g711ulaw
no vad
dial-peer voice 391 voip
description *** Auto Attendant ***
destination-pattern 399
session protocol sipv2
session target ipv4:10.245.226.131
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 392 voip
description *** Administration Via Telephone ***
destination-pattern 392
session protocol sipv2
session target ipv4:10.245.226.131
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 393 voip
description *** Extension Assigner ***
service ea out-bound
destination-pattern 393
session target ipv4:10.245.226.132
dial-peer voice 590 voip
description *** Voice Mail Pilot ***
destination-pattern 590
b2bua
session protocol sipv2
session target ipv4:10.245.226.131
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 1 pots
description ** Match all incoming POTS calls **
translation-profile incoming IncomingPSTNcalls
incoming called-number .
direct-inward-dial
dial-peer voice 899 voip
description Call to Mitel
translation-profile incoming Prefix9
translation-profile outgoing rem44
destination-pattern [23]..
session protocol sipv2
session target ipv4:192.168.114.2
voice-class codec 1
dtmf-relay rtp-nte
no vad
interface GigabitEthernet0/0
description *** Connection to Mitel Phone System ***
ip address 192.168.114.5 255.255.255.248
duplex auto
speed auto
interface ISM0/0
description *** Connection to Cisco Unity Express ***
ip unnumbered GigabitEthernet0/1
service-module ip address 10.245.226.131 255.255.255.128
!Application: CUE Running on ISM
service-module ip default-gateway 10.245.226.132
interface GigabitEthernet0/1
description *** Connection to IP Phone LAN ***
ip address 10.245.226.132 255.255.255.128
duplex auto
speed auto
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:
ip route 0.0.0.0 0.0.0.0 10.245.226.129
ip route 10.245.226.131 255.255.2
tftp-server flash:apps37sccp.1-4-4-0.bin
tftp-server flash:sip78xx.10-1-1SR1-4.loads
tftp-server flash:rootfs78xx.10-1-1SR1-4.sbn
tftp-server flash:sboot78xx.10-1-1SR1-4.sbn
sip-ua
mwi-server ipv4:10.245.226.131 expires 3600 port 5060 transport udp
registrar ipv4:10.245.226.132 expires 600
gatekeeper
shutdown
telephony-service
authentication credential cmeadmin c4p1ta2012
xml user xmladmin password xmladmin 15
extension-assigner tag-type provision-tag
max-ephones 104
max-dn 299
ip source-address 10.245.226.132 port 2000
auto assign 101 to 105
no service directed-pickup
timeouts interdigit 5
system message CFGS
url services http://10.245.226.131/voiceview/common/login.do
url authentication http://10.245.226.132/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7931 SCCP31.9-2-1S
load 6921 SCCP69xx.9-2-1-0
time-zone 22
date-format dd-mm-yy
voicemail 590
max-conferences 8 gain -6
call-forward pattern .T
moh enable-g711 "music-on-hold.au"
web admin system name cmeadmin secret 5 $1$QmIK$46fDKVSudMxzI2bRp/Ef7/
time-webedit
transfer-system full-consult
transfer-pattern .T
secondary-dialtone 9
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 298
number 598...
mwi on
ephone-dn 299
number 599...
mwi offPage 7 of the following link recommends that you use option 150 with the Cisco 7800 series phones and use option 66 if you cannot use option 150
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/10_1/english/admin_guide/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0_chapter_01.pdf
Dynamic Host Configuration Protocol (DHCP)
DHCP dynamically allocates and assigns an IP address to network devices.
DHCP enables you to connect an IP phone into the network and have the phone become operational without your needing to manually assign an IP address or to configure additional network parameters.
DHCP is enabled by default. If disabled, you must manually configure the IP address, subnet mask, gateway, and a TFTP server on each phone locally.
Cisco recommends that you use DHCP custom option 150. With this method, you configure the TFTP server IP address as the option value. For additional supported DHCP configurations, go to the "Dynamic Host Configuration Protocol" chapter and the "Cisco TFTP" chapter in the Cisco Unified Communications Manager System Guide.
Note
If you cannot use option 150, you may try using DHCP option 66. -
KABA connection issue - program not registered
I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.
Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor. -
Gateway error - Program not registered
Hello,
We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
LOCATION SAP-Gateway on host gisrxx / sapgw00
ERROR program SBCX not registered
It's an ECC 6.0 system.
I found SAP note - - 353597 - Registering a RFC program
I executed the following command as sidadm
rfcexec -aSBCX -ggisrxx -xsapgw00
But the command keeps on running on teh command prompt.
And for that duration the RFC works.
But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
Could you tell what needs to be done to resolve this issue?
Regards,
Gautam.Hi Gautam,
Please run the program in background (Unix) or as a service (Windows).
Please go through the following forum post. This should help.
Run rfcexec as service on windows
Br,
Venky -
RFC : Transaction Program not Registered
Hi Folks,
We have registered the server program from the middleware onto SAP R/3 System and is successfully registered as per the logs. As a next step, we have logged into R/3 System, SM59, in the RFC destination (Type TCP/IP) after specifying the registered program, we have tested it(Connectivity test). The test is positive and connectivity is established successfully.
The solution was working for months and suddenly connectivity is broken.
To restore the connection, we have repeated the steps, registered the server program, tested and everything is fine.
But when we have pushed a new message, then onwards the RFC destination shows an error. "TP is not registered", Return Code 679. That is when the first message is pushed, it is de-registering the server program and running into error. All the messages got stuck in SM58 with status 'Error when opening an RFC connection'.
RFC trace shows
ERVER> Caller transaction code: (Caller Program: SAPLQOWK)
ERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered.
Please let me know for any inputs.
Thanks, SurajMy problem got solved. In the middleware, when TRFC connection is made, it has created a lock entry during the time, system was brought down for maintenance activity. When the system is brought up, then as the connection lock entry is available, then it deregistered the server program and not able to establish further connection.
To resolve the issue, we have just deleted lock file and registered server program from middleware. This time the connection was established successfully and could able to restore the message flow.
Thanks, Suraj -
TREX7.1 - Program not registered
Hi to all experts,
I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I switched the RFCSERVER to "single thread (all hosts), deleted the old RFC connection and recreate the new one.
I have tried the following methods:
1. removed TREX and reinstall it again.
2. executed rfcexec u2013g<program id> -a<gateway host name> -x<gateway service> (it seems like nothing has been changed) - I registered it in SAP server, am I correct?
Thanks in advance.
BR,
NancyHi to all experts,
Problem solved once i restarted the SAP server and recreated the RFC connection in TREX server.
Another issue now, when i run the "python runInstallationTest.py", error occurs as below:
--> Check 01: Ping TREX Services
++----
++----
++----
STEP ³³ ACTION ³³ SPECIFICATION ³³ RESULT
++----
++----
++----
++----
++----
++----
Traceback (most recent call last):
File "/usr/sap/TX1/TRX01/exe/python_support/testbase.py", line 709, in run
ret = self.runHandler(*rest, **self.extractInheritedArgs(keys))
File "runInstallationTest.py", line 710, in runHandler
TREX_SHOW_STOPPER, webserver_unreachable, IS_QUEUE_SERVER = ps.ping()
File "runInstallationTest.py", line 275, in ping
services = HostPort4Services().getHostPort4Services()
File "runInstallationTest.py", line 88, in __init__
self.srvs = Services().getServices()
File "runInstallationTest.py", line 69, in getServices
content = Content('TREXDaemon.ini')
File "runInstallationTest.py", line 33, in __init__
self.content = self.getContent()
File "runInstallationTest.py", line 42, in getContent
raise RETURN_CODE(2, msg=msg)
RETURN_CODE: RC_NO_SETTINGS
No SAP_RETRIEVAL_PATH set in environment.
---> TEST ABORTED !!!
Is this test run very important? Any idea what is this problem about?
Many thanks in advance!
BR,
Nancy -
RFC Error: Program not registered
Hi,
We are presently facing issue with our GTS (Quality) and Seeburger system RFC connection. While doing the testing we are getting error as below:
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: TESTUSER (Client: 202)
Destination: SEEBURGER_RFC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SEEBURGER_RFC
HOST =%%RFCSERVER%%
PROG =BIS_ABC_202_DEV
GWHOST =ABC.XYZ.STU.com
GWSERV =sapgw15
I have checked RFC connection is fine. Also production systems connection are working fine.
Can anyone please help me out where to look in GTS or Seeburger to check about this issue and correct it.
Thanks & Regards,
ManishHi Sunny,
Thank you for your suggestion, actually we have tried registration using rfcexec and it works fine.
BTW, we have managed to solve this issue by de-activate the IDoc receive & send modules of websap component and activate them again.
Thanks and Regards,
Nick -
Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn
Hello All,
While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
our server OS : windows 2008 server
We are getting error while doing connection test in SRM.
This is sm59 connection (TCP/IP ) connection.
Connection Type: T / RFC destination Name: MDM_API_CATALOG
Registered server program: hostname.MDS
I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
I Checked this MDM setup also.
MDS setup
In mdm server go to folder F:\usr\sap\DM1\MDS00\config
Open MDM.ini file in notepad
Add the below 2 entries.
SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
Trusted SAP Systems= XXD
This will enable gateway connection between SRM and MDM and will enable trusted connection.
For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM and also created the same user in MDM with Default role.
Error message:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program XXXXXXXXPRD.MDS not registered
Error Details LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
Error Details DETAIL: TP XXXXXXXXPRD.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 77326
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME:
Error Details VERSION: 2
Procedure Tried
1) This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
2)
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su u2013 <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
In order to do above step 2, we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
3) Already checked the notes sapnote_0000684841
I know that it is generic error..This is happening to specific one of system only.
Thanks
Edited by: saptest2011 on May 20, 2011 5:36 PMHello SM,
Thanks for your quick reply.
Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
But still issue remain there.
The same RFC connection works between SRM sandbox to MDM sandbox.
Only issue with SRM Prod to MDM Prod (newly built system)
difference between MDM Prod and MDM sandbox.
MDM Prod runs: Windows server 2008 OS
MDM Sandbox runs: Windows server 2003 OS
Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
Thanks a lot for your help.
I checked these notes also
Note 353597 - Registering a server program
Note 44844 - No connection to registered RFC program
Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
Thanks
Edited by: saptest2011 on May 23, 2011 5:00 PM
Edited by: saptest2011 on May 23, 2011 5:39 PM -
Error 'Program not registered' while testing RFC connection PI_RFC
Hi Basis Experts
I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
Here is the Error log
Logon Connection Error
Error when opening an RFC connection
ERROR: program PI_RFC not registered
LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
DETAIL: TP PI_RFC not registered
Details COMPONENT: SAP-Gateway
COUNTER: 15866
MODULE: gwr3cpic.c
Details RETURN CODE: 679
We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
rfcexec u2013D PI_RFC
the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
Also we tried changing the Gateway hostname and service name in SM59.
Still we are facing the same issue, can anyone please help us in resolving this issue.
Regards
SyedHi,
It seems to like problem with your program is not registered. As suggested by spantaleoni, you can go through.
Here Program Id must be case sensitive. Once again check with your program Id.
And, you have to register your program id in Visual Administrator.
Goto Visual Administrator:
In that Select Cluster>Server>Services-->JCo RFC Provider
Then enter the Program Id and gw host & service.
Hope this helps to you.
Regards,
P.Rajesh -
Sap to non sap connection ( program not registered/cpic-call
Hi all,
Im trying to connect sap to siebel system.IN TCP/IP connections iv selected register program id & passed the parameters ...program id,gateway host and gateway service
i followed michal krawczyk steps & also checked in smgw
transaction also but program id is not registered there
im getting error like program sapprog not registerd cpic/call
<b>Detailed error</b>
<b>Error</b> - program sapprog is not registsred
<b>location</b> - sap gateway on host saple / sapgw01
<b>detail</b> - Tp sapprog is not register
<b>component</b> - gateway
<b>counter</b> - 387
<b> module</b> -gwr3cpic
<b>line-</b> 1621
<b>return code</b> - 679
<b>subrc</b> - 0
please try to help me out in this issue. all inputs r rewarded.
Regards,
LavanyaHi
Thanks prince,iv checked entries in sm59, i checked smgw tranaction(gateway monitor) for logged on clients
its showing like this
number/luname/tpname/sys.type/hostname/hostaddres/last req
0 /sapnav/sapgw00/local_r3/sapnav.sapdomain.com/192.158.3.219
if i double click on above...
read/write socket = 4
handle = 4
time = tue jan 26 16:54:13 2006
socket = 1652
stat = ni_connected
type = stream ipv4
out = 1122 messages 64 bytes
in = 1 messages 64 bytes
local =127.0.0.1:3300
remote = 127.0.0.1:1848
options =
lu = sapnav
tp = sapgw00
lon lu = sapnav
long tp = sapgw00
ext program = 0
no conversation = 24
appc version = 6
hostaddr[0] =
hostaddr[1] = 127.0.0.1
offset in = 0
timeouts in = 0
connected = tue jan 24
last req = mon jan
request block number in= -1
connection out = -1
target out = -1
offset out = 0
restlen out = 0
timeouts out = 0
request block number out = -1
accept info = einfo
snc forced = 0
<b>just see gateway monitor 4 sapnav/parameters & attributes</b>Profile
parameter Value
gw/max_sleep 20
gw/conn_disconnect 900
gw/conn_pending 60
gw/gw_disconnect 1800
gw/req_stack_size 30
gw/max_conn 500
gw/max_wp 0
gw/max_conn_per_wp 10
gw/cpic_timeout 20
gw/deallocate_timeout 600
gw/reg_timeout 60
gw/reg_lb_level 1
gw/reg_lb_default 20
gw/side_info C:\usr\sap\D01\DVMGS00\data\sideinfo.DAT
gw/sec_info C:\usr\sap\D01\DVMGS00\data\secinfo.DAT
gw/startup C:\usr\sap\D01\DVMGS00\data\gwstartup.DAT
gw/stat 0
gw/tcp_security 1
gw/cpic_security 1
gw/max_sys 300
gw/max_shm_req 50
gw/max_shm_req_per_conn 10
gw/max_overflow_size 5000000
gw/max_overflow_usage 10
gw/keepalive 300
gw/reg_keepalive 300
gw/compatibility 0
gw/monitor 1
gw/netstat_once 1
gw/close_routes 120
gw/timeout 0
gw/internal_timeout 0
gw/nitrace 0
gw/accept_remote_trace_level 1
gw/resolve_timeout 0
rdisp/max_gateways 100
rdisp/max_comm_entries 500
rdisp/sna_gateway sapnav
rdisp/sna_gw_service sapgw00
rdisp/TRACE_LOGGING OFF
gw/rem_start REMOTE_SHELL
gw/remsh rsh
exe/gwrd C:\usr\sap\D01\SYS\exe\run\gwrd.EXE
snc/enable 0
snc/permit_insecure_start 0
Attributes
Release 640
Release no 6400
internal version 2
start time Tue Jan 24 16:53:47 2006
build time Aug 17 2004 23:33:51
build with Unicode TRUE
build with Threads TRUE
gateway hostname sapnav
gateway service sapgw00
req_sync_limit 24
appc_ca_blk_size 34396
gwreq_ln 34588
appcdata_ln 34316
overflow_size_limit 500000
overflow_use 0
trace level 1
trace level external programs 2
PID Gateway Reader 4952
internal version 2
Shared memory Sizes in bytes
CONN_TBL entry 1748
CONN_TBL total 874000
STATISTIC area 1392
iv changed some values for my safety.plz check it and let me know the error to register program id. Hope ull solve my issue this time.
Thanks in advance,
Lavanya. -
RFC error: transaction program not registered
Hi gurus,
I am facing one issue with RFC connection.
I am creating one TCP/IP connection from ECC 6.0 (windows 2003) to EHS/WWI application. i am getting following error when i am doing connection test.
error: Program <PROGRAM ID> not registered.
Then i tried to register the program by running the following command at OS level.
rfcexec u2013a program_ID u2013g ######id u2013x sapgw00
But still the error persists.
Please guide me. also does this command creates entry in saprfc.ini file? i have tried adding it manually in that file also.I think you need change Activation Type Radiobutton.
I believe that you have checked "Registered Server Program", and with this flag you have to identify a registered RFC program. With an SAP gateway, an RFC server program can be registered under this ID and then wait for RFC calls from different SAP Systems.
Type T destinations are connections to external programs that use the RFC API to receive RFCs.
If it is Start, you must specify the host name and the pathname of the program to be started. -
EHS_EXPERT Transaction program not registered.
Hi,
My rfc connection is giving the following error.
I have created afrc connection between SAP R/3
and EHS Expert server which is on another windows server.
please suggest the solution.
Trace file opened at 20100730 123242 EEST SAP-REL 701,0,32 RFC-VER U 3 1046591
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: BASIS (Client: 007)
Destination: EHS_EXPERT (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =EHS_EXPERT
HOST =%%RFCSERVER%%
PROG =EHS_EXPERT
GWHOST =hksap01
GWSERV =sapgw00
Regards,
Ravi.hello
there is a small difference in ERP (EH&S) Releases and how to handle them regarding EH&S Expert. Please take a look here:
http://help.sap.com/erp2005_ehp_04/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
regarding actual release.
The installation and configuration of the EH&S Expert ist described in a general OSS note (refer below). In this OSS note it is shown how to do it (you need to configure Windows etc.).
In WWI Conncetion it is furtheremore important how you configure the RFC (Unicode transfer mode or not). With EH&S Expert I have no experience but the same issue applies in my opinion.
With best regards
C.B.
PS: check these OSS notes:
568302
1434736
1299868
1364100
700288
I hope that one of them could help.
PPS: to my knowlegde the detail configuration guide of EH&S Expert is part of the downloaded files of the most recent EH&S Expert version.
Edited by: Christoph Bergemann on Jul 31, 2010 1:44 PM
Edited by: Christoph Bergemann on Jul 31, 2010 1:48 PM
Edited by: Christoph Bergemann on Jul 31, 2010 1:51 PM -
Showmount: HOSTNAME: RPC: Program not registered
I am new to solaris. I have solaris 10 installed in one of my machines. When i try to list the remote mounts using the command "showmount", i am getting the error "RPC:Program not registered" . I am not aware of which services i have to check/start to get this fixed. Can someone please help me on fixing this issue?
I found the following reply in one another thread and i shared and unshared as suggested, now my problem appears to have been fixed. Can someone please explain what the following steps are doing?
I ran the following which worked for me (not sure why).
share -F nfs /mnt
unshare /mnt
Somehow that kicks RPC to work. "showmount" now works. -
Program VERIHTECH10_BEX_WEB not registered- BO 4.0 RFC TO BI System
Hello Everybody
A previous consultant had installed BO 4.0 system and integrated it with BI 7.0 system. In SM59 when we do a connection test i am getting an error: Error when opening a program. Error: Program VERIGTECH10_Bex_Web not registered. I checked the host name and gateway all of them are correct.
Also in BO server i checked for the registered program under HKEY_LOCAL_MACHINE/SOFTWARE/SAPBUSINESS OBJECTS/SUITE XI 4.0/ .. Here i was unable to find the registered program id and the gateway. BI 7.0 and BO 4.0 have been installed in two separate servers.
Operating System: Windows Server 2008
1. Version of BO: BOXI 4.0
2. O.S: Windows Server 2008
3. Application Server: TomCat
4. CMS Database: MS SQL Server 2008
Could anyone please help me resolve the issue.
Thanks and Regards
Ahmed NawazHello Everybody
A previous consultant had installed BO 4.0 system and integrated it with BI 7.0 system. In SM59 when we do a connection test i am getting an error: Error when opening a program. Error: Program VERIGTECH10_Bex_Web not registered. I checked the host name and gateway all of them are correct.
Also in BO server i checked for the registered program under HKEY_LOCAL_MACHINE/SOFTWARE/SAPBUSINESS OBJECTS/SUITE XI 4.0/SAP/.. There is no publishing service under SAP. Under Central Configuration Manager BW Publisher Service is Stopped.
I tried re-creating it using installdir>/SAP BusinessObjects Enterprise XI 4.0/win32_x86/bwcepubsvc.exe" -install -name BOE140BWPublisher but i was still unable to find it under REGEDIT>HKEY_LOCAL_MACHINE->BO>XI4.0->SAP.
Here i was unable to find the registered program id and the gateway.
BI 7.0 and BO 4.0 have been installed in two separate servers.
Operating System: Windows Server 2008
1. Version of BO: BOXI 4.0
2. O.S: Windows Server 2008
3. Application Server: TomCat
4. CMS Database: MS SQL Server 2008
Could anyone please help me resolve the issue.
Thanks and Regards
Ahmed Nawaz -
Program dcs.sndsap not registered
Hi,
We're in the midst of integrate our SAP with 3rd Party WMS. I've registered the program -id using command:
rfcexec -DSAP_SEND
rfcexec -adcs.sndsap -gHOSTNAME -xsapgw00 &
I've created RFC in SM59 using method T.
I can see the registered program working fine in SMGW. The issue that i'm facing, the registered program process will terminate by it self after few minutes and when I test it via SM59, i'll receive message "program dcs.sndsap not registered". Is there any way that I can investigate why the process terminated? and how could i ensure that the program always registered?
Thanks and Regards
TarmizeeHi,
can you go to trace file of work processs and look at the errors(which are in red colour / latest errors).
if u find any difficulties in analyzing those errors related to disconnection or any errors related to ur 3rd Party WMS server in trace files paste those errors here.
Also can u check r u getting any errors in sm21 logs. paste them here, if u need any help on that too.
Also ask your 3rd Party WMS server admin to increase the gate way connection from their end too.
Regards,
Ravi
Maybe you are looking for
-
Setting the frame of an object based on collisions
I'm almost done with a project I've been working on for a while and need help with the Actionscript. I first got help here: http://forums.adobe.com/message/4706107#4706107 ; basically what I set up was that an object would change its frame based on
-
How to restore trashed Address Book file?
Hi, I had launched Address Book (and Mail 2.1.1) and was creating some new groups. All of a sudden I got the spinny colored cursor. I waited awhile, then did a Force Quit. Now when I launch Address Book all my addresses and groups are gone. Any way t
-
HOW TO USE AIRPLAY IN IPHONE 4?
I AM TRYING TO PLAY MUSIC ON MY WIFI ENABLED SAMSUNG MUSIC SYSTEM BUT IPHONE 4 IS NOT SHOWING AIR PLAY OPTION
-
I need to Export Outlook 2011 data to Windows Outlook as the new company I joined used Windows based systems and I need tot switch to Windows Platform. But all my work mails are in Mac Outlook 2011 which is giving me hard time exporting the data. The
-
Ok, when I click on the WWDC Keynote address I get the following alert from Quicktime: A network error has occured. This computer's Internet connection appears to be online. (-66559). Uh, Ok, of course my network connection is online, I am surfing th