Webgate redirection problem

i have installed a webgate on a reverse proxy for weblogic
i am not able to login, the browsers says it has gone in the loop.
how to resolve this issue?

I don't know whether the issue is common but I applied a patch for the apache webgate which resolved my problem. Forgot the patch number but I googled abt the issue and found some links... I had a different use case though not sure if its valid in your case.
One more thing to take care is the preferred host in the access gate information in Oracle Access Manager. The redirection usually takes place to the value specified there.

Similar Messages

Dynamic form "Cancel" redirect problem in frames - bugfix?

My question: Is there a "long run" down side to my implementing this modification to style.js?
The below post by Ionut:MX Division Support Specialist worked for me as a solution to a current form "click cancel" redirect navigation problem:
When a DWtoolbox dynamic form wizard form is placed on a page within frames, clinking on cancel does not return a user to the list that sent them to the form. The user is sent somewhere else.
Begin Ionut post-------------
If you don't need to add extra parameters to the "Edit" button, you can solve the redirect problem by editing the "/includes/skins/style.js" file and replace:
nxt_list_edit_link_form(this, myinput.previousSibling.href);
with:
nxt_list_edit_link_form(this, a.href);
End----------------------
Thanks Ionut for the tip and anyone in support for letting me know if this is a safe mod for the long run,
Steve M

Hi Marny,
Hello Steve. I am new to Adobe & very confused. You seem to grasp the program very nicely, please help Me?
I´m not not Steve, however -- what problem do you have exactly, and is this problem related to the "Adobe Dreamweaver Developer Toolbox" extension or related to Dreamweaver ?
If it´s related to ADDT, please describe your problem by starting a new thread -- if it´s related to Dreamweaver, please post your questions in the general Dreamweaver forums.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Proxy redirect problem

I'm having a redirect problem going through a weblogic proxy. An app I was using appears to be redirecting the browser always to localhost:7121 which won't work with access via the my domain.
To explain fully I set up a test JSP page which outputs request.getRequestURL().toString() so I could trace what was happening. The weblogic configuration is explained below:
I'm using Weblogic 8.1 sp5. I've setup a 4 instances: a proxy (port 7120), redirector (port 7121) and cluster (two instances running on 7131, 7132)
If I navigate to:
http://localhost:7120/myapp/test.jsp my test page outputs: request.getRequestURL().toString() : http://localhost:7121/myapp/test.jsp
and again to:
http://localhost:7131/myapp/test.jsp my test page outputs: request.getRequestURL().toString() : http://localhost:7121/myapp/test.jsp
or
http://localhost:7132/myapp/test.jsp my test page outputs: request.getRequestURL().toString() : http://localhost:7121/myapp/test.jsp
The output is always the same ... it always says the requestURL is from localhost:7121 the redirector?
Can anyone help explain why I always get the same output? It is completely baffling me.
Thanks,
Matt
Edited by: user5673380 on Oct 15, 2008 3:52 PM

The problem was caused by incorrect configuration of FrontEndHttpPort and FrontEndListener and FrontEndHost in the cluster configuration. These values were incorrectly during config wizard install.

I want to downgrade from ios7 on my ipad mini-it seems to have affected certain websites which I now can't access due to 'redirect' problem

I want to downgrade from ios7 on my ipad mini-it seems to have affected certain websites which I now can't access due to 'redirect' problem....

Google is your friend. You have to move very quickly on this. It can't be discussed how to do it on this site and is not supported.

Crystal Report in an iFrame redirect problem

Hi!
I have built a page with a only Crystal Report on it, which I display in an iFrame on another page.
I have a hyperlink on the page that is used to redirect the iFrame by assigning the iFrame a name and setting the target of the hyperlink to the iFrame. When the user clicks the hyperlink, it will redirect the iFrame.
This all works fine up until the point at which you generate the actual Crystal report. After the report has generated, attempting to redirect the iFrame via the hyperlink causes a new browser tab/window to open. A few tests that I have run using Javascript or codebehind circumvent this issue, but as it stands I cannot use this method.
This issue has only just arisen with the VS2010 version of Crystal Reports. The older versions do not have this problem.
Research I have done into the issue have been fruitless and have tinkered with the Report Viewer itself a bit to no avail.
Is there an explanation for this issue and/or a means of getting past this?
Any help or nudge in a new direction is very much appreciated!
Regards,
Frank.

Hello Frank:
This issue has been reported to R&D for a fix (ADAPT01554950). At this time, the fix is targeted (not guaranteed) for Service Pack 3. ETA; mid 2012.
For a possible work-around, see the following thread:
Crystal Reports Viewer VS2010 FRAME target issue
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Nov 28, 2011 7:48 AM

GPO (as a whole) problem or Folder Redirection Problem?

Hello everyone,
After a couple hours of looking at different TN articles on folder redirection I just can't get it to work properly. I had some major system errors and had to perform a clean install of the OS. My folder redirections from the old install seem to be in place
and are about the same size despite me backing up all the content before the reinstall on each terminal (4 of them) to a usb drive.
I enabled folder redirection through the dashboard and performed a gpupdate /force I see the GPO in the Group Policy editor but none of my machines seem to be accepting any group policies now that I look at it and write this I have firefox set to update
to the latest .msi and it isn't doing that either could this be a bigger problem than just folder redirection?
Any tips or links to articles I may have not seen would be much appreciated.
Thank you in advance everyone.

Hi James,
Based on your description, I understand that you enable folder redirection (click Implement Group Policy on
Dashboard) on a Windows Server 2012 Essentials (or a Windows Server 2012 R2 Essentials?).
On current situation, please refer to following and check.
1. Would you please let me know edition information of this client computer?
2. On the server essentials, please open Group Policy Management. Then navigate to WSE Group Policy Folder Redirection and click it. In right panel, navigate to WMI Filtering
and select WSE Group Policy WMI Filter, then click Open button. Please check
Queries in the WMI Filter. You can psot complete queries here (include Namespace and Query).
3. On the client computer, please run the command in a command prompt:
gpresult /z > c:\policy.txt. Then check this policy.txt in C drive or post the result here.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How to make Webgate redirect to a specific resource based on AD Attributes?

My client has already purchased Oracle Fusion Middleware 11g, which contains the OID 11g suite. They have an initiative to enable SSO based access to their business apps for both internal and external users. They have already implemented AD and also FMW 11g with OID integrated with AD.
We need to provide a path way for legacy portals to integrate into this environment. One the goals is to have a single URL (let's call it one.company.com) by which employees, customers & business partners access all business applications. The long term goal is to leverage WebCenter to be the portal framework, which provides access to all business app. However, the client has prioritized the SSO integration over the portal framework integration at this point.
So the interim solution needs to address the following use case:
Internal User:
1. Log into workstation via MS AD DC, get Kerberos token set on workstation.
2. Open browser and navigate to https://one.company.com, browser either silently authenticates via Windows Native Authentication (IE for example) or presents user a challenge box asking for authen&author creds (FF for example).
3. WebGate installed on OHS works with OAM (which works with OID) to authenticate the user, assume Auth OK
4. <Some Component> works with OAM to obtain user's roles. If user has role 1 redirect to site 1 (assume this is the legacy portal, which has been modified to work with Oracle SSO), otherwise if user has role 2, then redirect to site 2 (assume this is web center)
The reference to <Some Component> in #4 is what we need help answering. We suspect it is WebGate, and from some reading I have done I know that there are apache directives that can be used to do conditional redirects. I'm just missing the link between getting the roles out of OAM and instructing the web server which resource to redirect to based on OID role.
We also have a very similar use case for external access (to the same site, https://one.company.com). It will be assumed that all users are AD enabled even external ones. For external access, all users will first land on a company wide common login page, which will ask for AD user name & pwd. After submitting credentials, the same scenario plays from above, starting at step 3. All applications will be programmed to read the obssoToken (via browser cookie or server headers) to understand user details.
Has anyone had to architect this kind of deployment before? If so, how did you deal with it? Was it as simple as the whole WebGate/Apache redirect setup I am thinking of?
Thanks,
FM

I choked on my mango lassi while reading this..but as our chinese brothers and sisters say, A journey of a thousand miles begins with a single step.
user8214884 wrote:
2. Open browser and navigate to https://one.company.com, browser either silently authenticates via Windows Native Authentication (IE for example) or presents
user a challenge box asking for authen&author creds (FF for example).FF can deal with Kerberos just like IE can via SPNEGO although getting it to work like IE is a different story. But let's say FF doesn't do Kerberos or let's say it's an external user. Have you tried implementing this mechanism with OAM 11g? I would start there. You may not get to your next steps.

Web Redirection Problem on Cisco ISE 1.2 and WLC 7.5

Hello,
We are at initial phase of deploying ISE 1.2 in our environment for Wireless Guest Users.
I have configured ISE and WLC to talk to each other which is working fine. An SSID with MAC-Filtering is also configured on WLC and ACL only allowing ISE and DNS traffice.
I have configured proper authentication and authorization policies on ISE. Now, when I try to connect my device (laptop and android mobile), I see my device gets associated with the SSID (Demo) and gets the right IP Address from DHCP and right VLAN from WLC. The log process on ISE is as follows.
11001
Received RADIUS Access-Request
11017
RADIUS created a new session
11027
Detected Host Lookup UseCase (Service-Type = Call Check (10))
15049
Evaluating Policy Group
15008
Evaluating Service Selection Policy
15048
Queried PIP
15048
Queried PIP
15004
Matched rule
15041
Evaluating Identity Policy
15006
Matched Default Rule
15013
Selected Identity Source - Internal Endpoints
24210
Looking up User in Internal Users IDStore - B8:B4:2E:A6:7D:75
24216
The user is not found in the internal users identity store
24209
Looking up Endpoint in Internal Endpoints IDStore - B8:B4:2E:A6:7D:75
24211
Found Endpoint in Internal Endpoints IDStore
22037
Authentication Passed
15036
Evaluating Authorization Policy
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15004
Matched rule - Guest Redirection
15016
Selected Authorization Profile - Test_Profile
11002
Returned RADIUS Access-Accept
I also see a redirect url in the detailed authentication logs. But the problem is that when I open my browser on my device, it doesn't get redirected to the guest portal url. Now since I can't get there, I can't continue with the rest of the process of authentication, COA and final ACL for internet access.
Can some one please either guide me the correct steps that I need to follow, if I have mis configured something or advise if this is a bug.
Thanks in advance.
Jay

The ACL is definitely used to define what traffic is re-directed to ISE and what traffic is not redirected. Having the permit-all statement at the end will break redirection. If you are using flex-connect then you will need to use flex-connect ACLs and apply those to the flex-connect APs. The links below should give you an idea of what needs to be done:
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113606-byod-flexconnect-dg-000.html
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html
Thank you for rating helpful posts!

Redirect problem in IE 9

Hi,
i made a custom page sentry function to authorize via NTLM. It works fine with IE 8 and Firefox.
With IE 9 (Windows 7) the redirect via <meta http-equiv="refresh" content="0; URL=' || vUrl || '" />'); doesn't work. The user sees the html code and has then manually press the refresh button for going on to the 1st page in the application.
Here i have my Proof-of-Concept http://www.greenit.li/greenIT/Willkommen_files/Oracle_APEX_ProofOfConceptNTLMPLSQL.pdf
Has somebody an idea how to solve this problem?
Thanks in advance.
Regards,
Martin

Hi Martin,
I think you should use
sys.owa_util.mime_header('text/html', FALSE);after the
htp.init;so that the browser knows it's HTML code.
BTW, the PL/SQL based NTML authentication approach isn't really secure because it's not verifying the user/pwd with an MS Active Directory server.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

J_security_check redirection problems impossible to solve

Hi!
I've been searching and trying to solve this problem for a couple of days now. I'm new in JDeveloper development and defined ADF security. Authentication works fine, since after I try to go to protected (security-constraint) page, the login page appears and then after the login, if I type the address to the same page again, I can view it. The problem is that j_security_check doesn't redirect me to this page. I've tried everything, using different redirection pages, with faces, without, with /*, without, ... I always got 404 not found page.
Then, with the help of File monitor we figured out that jawaw.exe process is looking for some css file in the subfolders of login page folder. When we put the folder with css file there, we don't get 404 page anymore, but j_security_check redirects us to this css file?!?!? If I then delete the session cookies and login again, 404 page appears again.
What is wrong? PLEASE! I'm giving up here.
I've searched files in entire application that include this css file but haven't found it anywhere that it shouldn't be.
I would really appreciate any help on this since I don't know what to do any more.
Cheers, BB!

I am facing exactly the same issue, login page works fine with JAAS, but i get 404 page not found error. If i put the url of the page directly in url after authentication, then it works fine.my login page is not in WEB_INF folder
--Mukul

Page redirection problem in Oracle EBS 11.5.10

Hi All
I did a fresh install of Oracle EBS 11.5.10 in centos 5.3 . After the install I am getting error while logging in to the application.
" f7
Found
The document has moved here.
0
When I click the hiperlink <here> i get redirected to the application home page. I am not able to open any forms after that.
Can anyone guess where is the problem and advise the solution.
Thanks
Ridhi Sundar

I did a fresh install of Oracle EBS 11.5.10 in centos 5.3 . After the install I am getting error while logging in to the application.Are you trying to access the application from a Linux client? If yes, and even though your installation completed successfully please note that Linux is not certified as a client tier -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Linux+AND+Client&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Web service url redirecting problem

I am working on a form developed by LC Designer that will call a web service from our web server.
In the WSDL, the soap address location points to www.domain.com/webservice1,
however our web server will perform load balance by directing all www.domain.com to a new url
either www1.domain.com or www2.domain.com.
The result is that nothing is returned after executing the webservice call, I can't catch any error
after xfa.connectionSet.WebServiceDC.execute(false); just nothing returns after the call.
I suppose it is the problem that the url has been redirected to a different one.
However if the soap address location points directly to either www1 or www2, the call returns result alright.
Is there way or script that I can handle by redirecting a web service to a different URL like that in Adobe Flex?
That is what I found from the web for Adobe Flex :
public function onLoginResult(event:ResultEvent):void {
//Extract the new service endpoint from the login result.
var newServiceURL = event.result.serverUrl;
// Redirect all service operations to the URL received in the login result.
serviceName.endpointURI=newServiceURL;
Best Rgds.

A helpful poster on the House of Fusion forums pointed me to
a work-around:
Apparently ColdFusion just uses the WSDL to create the sub
objects for the web service call, so as long as there is a service
port address secified in the WSDL it doesn't matter where the
actual WSDL file sits. So I just downloaded the WSDL using CFHTTP
(had to use this article to configure CFHTTP for HTTP Compression:
http://www.talkingtree.com/blog/index.cfm/2004/7/28/20040729)
and then I pointed my CF Administrator to the WSDL on my local
machine. And Presto - I can connect to the web service no problem
now.
Only problem is that I have to download the WSDL every time
there is a change to the webservice, but I can schedule a task that
downloads the file once a week or so.

ISE CWA redirection problem for Apple devices

Hi,
I'm testing some guest scenarios (CWA) in my lab using ISE1.3 and WLC2504 (7.6.130).
I have noticed that redirection to ISE portal doesn't work for apple devices (iOS 7 and later).All other devices like laptops,androids etc work fine.
Seems that the workaround on WLC that bypasses the CNA on iDevices doesn't work in my case.The device tries to open the ISE portal and shows just a blank page (attached photo)
The problem doesn't appear for devices with iOS 6 but only for newer versions.
I've also tried with version 8.0 on WLC without success.
Any advise?
Regards.

Captive portal/wispr support for apple ios7
CSCuj18674
Description
Symptom:
When attempting to access the Guest Portal with an Apple iOS 7 device while the WLC "Captive Portal Bypass" feature is enabled, the web sheet on the device still appears, preventing the user from continuing the flow.
Conditions:
The Apple device is running Apple iOS 7.
Workaround:
In the ACL on the WLC used for captive portal redirection and exemption of special traffic for the Guest Portal, add exemptions for the IP resources that resolve from "www.appleiphonecell.com" and "captive.apple.com" FQDNs.
IMPORTANT NOTE: These IP addresses are associated with the FQDNs of "www.appleiphonecell.com" and "captive.apple.com" and are subject to change by the entities hosting those domains. If the IP addresses do change, the ACL would need to reflect that.

ISE - AV Link remediation redirect problem

Dears,
Am working on ISE 1.1, and am facing a problem after the posture assessment for a machine, if the machine doesn't have the correct antivirus, the NAC Agent suggest the following link remediation: http://kaspersky.test.com, when the user tries to click on the link, the link is redirecting him to the client provisioning page instead of the right page of the antivirus installer. Even if I try to put the IP address instead of the link http://10.10.10.10 the problem persist.
Any ideas what could be the problem?
Thank you in advance
Regards
zahi

Hi,
If this is for a wired interface then you need to check the redirect acl and make sure that the entry is not redirecting remediation traffic.
thanks,
Tarik Admani
*Please rate helpful posts*

The redirect problem in wap

I have three pages:input.jsp save.go and list.jsp
--------input.jsp.
users input some thing in it,and there is a submit button on it. the button linked to "save.go"
--------save.go
save.go is a servlet in fact.it will save what the user submited and then redirect to "list.jsp".use:response.sendRedirect("list.jsp");
---------list.jsp
list users' inputs.
the problem is that in the web browser,I refresh "list.jsp", it won't resubmit user's input,but in the wap browser,it will resubmit user's input. I found that ,in the web browser ,the "list.jsp"'s address in the address bar is"........list.jsp",but in a wap browser or a cellphone, it will be ".......save.go",that's why in the wap browser it will resubmit .
anybody knows the real reason of this problem??? how does the wap gateway deal with the http302 response?thanks!

Hi Martin,
I think you should use
sys.owa_util.mime_header('text/html', FALSE);after the
htp.init;so that the browser knows it's HTML code.
BTW, the PL/SQL based NTML authentication approach isn't really secure because it's not verifying the user/pwd with an MS Active Directory server.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Webgate redirection problem

Similar Messages

Maybe you are looking for