WebGL for Mavericks, how to get it ?

While your browser seems to support WebGL, it is disabled or unavailable. If possible, please ensure that you are running the latest drivers for your video card. How do I solve this for Mavericks and Safari?

Solved using solution to "How do I enbale WebGL in Safari 5.1?"

Similar Messages

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

In iMovie 10.1 for Mavericks, how do I output in .mov format?

In iMovie 10.1 for Mavericks, how do I export a movie in .mov format?

Thanks Pieter. It looks like streamclip might work albeit a bit messier. It is very disappointing that the latest iMovie does not seem to be able to directly output to the .mov file format.
It looks like going back to the previous version of iMovie might be the best choice.
Regarding your curiosity, I am submitting a slide show for a theatre presentation. The rules state:
Slideshows must be submitted as single video files in .MOV format. Any slideshows submitted in a different format will be rejected.

Tiny hand-made extension for Mavericks, how-to/what-with?

Tiny hand-made extension for Mavericks, how-to/what-with?
We need one small extension in Mavericks.
The goal and prerequisites are described below.
Preferable on script basis.
The question how the goals can be achieved and by use of which Mavericks on-board tools?
Extension's UI available in system menu (preferable the context menu while in a Finder window).
Script conducts on invocation following operations:
- create a new text file in folder of current Finder window
- file name can be fixed programmed in script
- add to the file name appropriate postfix if file already exists
- inject into file a string which is fixed-coded in the script
- inject in file's next line the clipboard content
It is in user's responsibility to ensure the clipboard content is a text
- save file changes to disk
- close the file
- Optionally ask user for file name

Tiny hand-made extension for Mavericks, how-to/what-with?
We need one small extension in Mavericks.
The goal and prerequisites are described below.
Preferable on script basis.
The question how the goals can be achieved and by use of which Mavericks on-board tools?
Extension's UI available in system menu (preferable the context menu while in a Finder window).
Script conducts on invocation following operations:
- create a new text file in folder of current Finder window
- file name can be fixed programmed in script
- add to the file name appropriate postfix if file already exists
- inject into file a string which is fixed-coded in the script
- inject in file's next line the clipboard content
It is in user's responsibility to ensure the clipboard content is a text
- save file changes to disk
- close the file
- Optionally ask user for file name

In ME2N report for PO- How to get or add Vendor name in ALV grid output

Hl Everyone
How to get or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
cuurently i am in 4.7 E version.
Kindly suggest..........
thanks in advance
Regards
Prashanth

Hi Pankaj
I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
Kindly suggest
Regards
Prashanth

SAP Cloud for customer how to get the Account ID and UUID from cloud

Hi Experts,
I have small requirement in cloud for customer.
How to get all the account id with UUID in excel sheet using any SDK or other ways?
Any way to get this information because i have tried using "Mass Data Maintenance" but not getting any information.
anyone know how can i get this information in cloud system?
Many thanks,
Mithun

Hi Mithun,
In my understanding there SAP will not share IP address of tenant. If this is really urgent you should discuss to SAP Partner coach or any other representative. SAP network team will not directly communicate with you, this will require numerous approval inside SAP itself.
Thanks
Sunil Maurya

Specialized icons for home, how to get them?

I've read before that common folders in home can have specialized icons (i.e. one for Documents, another for Music...) but for the life in me I can't remember how to get them? Anyone know how?

hi,
have a look here: <a href="http://help.sap.com/saphelp_470/helpdata/en/08/51421d43b511d182b30000e829fbfe/frameset.htm">CO External Data Transfer</a>
Andreas

SAP Cloud For Customer How to Get the IP Address of Tenant

Hi Experts,
I need to know how to get the IP Address of our cloud Tenant ?
Can anyone know please tell me the process.
Many Thanks
Mithun

Hi Mithun,
In my understanding there SAP will not share IP address of tenant. If this is really urgent you should discuss to SAP Partner coach or any other representative. SAP network team will not directly communicate with you, this will require numerous approval inside SAP itself.
Thanks
Sunil Maurya

Insurance claim for music - how to get print out of purchases from itunes

Can any one help me as my Hard Drive crashed yesterday and i've lost all my Music, movies etc purchased from itunes in the last 2 years. Need to know how to get a detailed print out from itunes to prove purchase and claim on insurance. And yes i know i should have backed up my recent files...

The only way is to log into your iTunes Store account (you'll need a working computer with iTunes installed, of course), go to your Purchase History, and do a screen capture of each successive page. There's no way to print out a full listing of all your purchased in one go.
Regards.

Verizon tech support for FIOS - how to get around the attitude.

Most are helpful, but some are rather disdainful of macs or linux, or act surprised if you have more than one computer.
A: Well, if I only had one computer, why would I need a router?
Linux does not need any special support, and in fact runs quite beautifully on FiOS and the router without any setup at all. It recognizes the router and self-adjusts with DHCP auto. Actually it's much faster and less flawed than Windows.
Linux doesn't have any recognized or known virus. At all. FUD is generated at various times during calls to FiOS support when I make the mistake of mentioning linux. They act like it's going to break their network.
I'm an Admin from MSFT, and MSFT uses linux. Extensively. They just don't like to talk about it. "Seven" = NT 7.0. NT is MSFT's version of UNIX, which they licensed fom Novell.
So, even microsoft contains unix code. Tada. Lets' drop the operating system arguments for now though.
I have three Dell servers, six Dell and HP desktops, and two laptops. All but two of them run linux full time, and only one is dual boot. Both laptops run linux exclusively and so do three of the desktops and ALL my servers. I've never in 12 years had a linux virus, and I never will. No, I don't even run a firewall, and there is no linux antivirus software accepted by the linux distributions, because it's useless. Not needed.
All of these machines, XP, Vista, Ubuntu, Slackware, and Red Hat Server run on four brainless hubs, or switches. A switch is not capable of DHCP or DNS routing. They are passive devices which are not capable of blocking a router. They only stop working when they die. You can have switches [hubs] in ANY conceivable chain or configuration, and they still work the same, as they all take commands from whatever routers you have.
The only router in my home is the verizon router. I have no need of others, but I've run dual and even triple routers before without a single problem. You set the extra routers to 192.168.2.1 instead of 1.1. Third router? 192.168.3.1. And so on. Painless.
None of these devices have yet failed or ever blocked internet access, yet half the time when I call verizon FiOS, the tech people tell me to connect directly to the router with my laptop. I've always just TOLD them that I did, but I never ever did that. It's not necessary. If you can't connect to 192.168.1.1, the router is dead. checking hubs is an astoundingly simple task that only takes a second... you just go to any other computer on that hub, or plug in my laptop, and see if you can get through. I've had one hub fail in the last 8 years, and that didn't fool me for more than a minute. I replaced it and was back in biz without tech support help.
ONLY in the instance where only ONE computer is down, does it make sense to isolate the router. Thus, the FiOS people are just trained to eliminate the obvious, but they also talk smack. MOCO? Why would I have a major OC24 type network connection in my home? I've been hit with just such questions. Wouldn't verizon know if I had a backbone connection through them???
Here's the deal: Buy your own equipment, and get warranties. Unless the external box, ONT I believe they call it, has died, you're not likely to get a lot of support anyway - since verizon will not talk about anything other than their router and the ONT. Save time and just be aware of your own eqiupment. I'm on my sixth day of having no FiOS since Verizon sent me a new also bad router and now I'm awaiting another replacement by the UPS people. Speed is not a hot button issue with verizon service apparently, but they are better than comcast.
Good thing about verizon is that they don't appear to cap bandwidth, and for that I respect them no matter how much garbage I get from a few of the tech support staff. Even most of those people are pretty nice. One of them actually talked linux with me for a half hour, and that was a breath of fresh air.
Verizon needs to realize that there are three to six times more linux operating systems in use now worldwide than all windows products combined. The US Army and US Navy have switched to linux systems and dumped windows. I'm shopping for another new desktop, and I'm only buying penguin computers. I won't buy "7" because I've seen the source code, and don't have a high opinion of it. Linux is more robust, and for whatever reason, MSFT still refuses to implement the System Five and UNIX security levels that are inherent to a safe Operating System, and a kernel component of unix. I don't see why not. NT is capable, but all suggestions to turn it 'on' are ignored.
I want to see verizon get with the program and start to support linux. After all, it's fifteen times cheaper to maintain, and three times less expensive to develop for. Verizon would never have to deal with spyware and viruses from its users ever again. One day I hope verizon will wake up.
In the meantime, it would be nice if the tech support at FiOS wouldn't misinform clients and customers about linux, macs, and having several computers in the home. There's nothing at all wrong with that. I just bought a netbook from you folks and I'm using that now to get online.

All I have to say about that is, "People fear what they do not know." Everyone has a comfort zone. Some people's comfort zone is larger than others, or encompasses different aspects of life. Most Windows users aren't comfortable with Mac or Unix operating systems. Most English speakers aren't comfortable with foreign languages. Most two-year-olds aren't comfortable with spinach.
C'est la vie.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Saving for web - how to get transparency saved?

It works with saving it as png24, but only on a white background. How can I save it for web so that I can put a shop-banner with rounded corners on any coloured website background without adjusting it to the special colour onto which it shall be put. Or let's put it otherwise: How can I save it for no special colour, so that a customer may put it onto any kind of colour without having stupid white or black or grey coloured edges showing where the corners have been rounded and where I want it to be transparent?

You need to replace the background with true transparency. First rename the Background layer to anything else. It is sufficient to double-click it in the Layers Palette and accept the default name "Layer 0". Select the background and delete it, replacing it with checkerboard pattern indicating transparency (in some cases it might be easier to select the object, invert the selection, and delete). Then when you save it to png or any other format, check the preserve transparency option if there is one.
Here I started with a flag on off-white background. After renaming the Background layer and deleting the background here is the result.
Important! File types PSD, TIFF, PNG, GIF, EPS support transparency. JPG, BMP do not.
Note that you get the same result if you duplicate the Background layer, do the select/delete on the copy layer, and turn off the vivibility of the Background layer:

No CS5 updater for Mavericks but CS6 gets one

Another glaring example of Adobe coldly abandoning its Fireworks users. There's an updater for CS6 for the new Mavericks OS, but no updated for CS5.
Adobe keeps making me dislike it more. Wish Macromedia had never sold Fireworks. At least they had some enthusiasm about the app.
And I'm not about to be sucked into the pay-in-perpetuity scheme called Cloud, in which they make whatever tweaks to the app that they feel like making whether I want 'em or not. At least in sticking to CS5 I have an app that I know, without unrequested, un-cancellable "improvement" changes.
Guess I'll just have to live with the new, erroneous "Could not save this file" prompts in CS5 and renew my Adobe disgust each time the prompt rears its meaningless little window.

Brad Messer wrote:
There is NO alternative to Fireworks.
You are correct: there is nothing out there that completely mimics Fireworks. Do realize that the slicing paradigm in Fireworks is somewhat outdated, though, and web workflows have evolved. FW never really kept up with those since Adobe took over development.
Some options:
Sketch: http://www.bohemiancoding.com/sketch/
Xara Webdesigner or Designer Pro (which includes all of WebDesigner's features): http://www.xara.com/us/products/webdesigner/
Macaw will be out soon. Looks very interesting: http://macaw.co/
Antetype is also good, though more of an extra tool: http://www.antetype.com/
Myself, I replaced Fireworks with a combination of Photoline, Xara, and Color Quantizer. And the Foundation framework: http://foundation.zurb.com/

Sequence Setting For Stills - How to Get Sepia Look?

Hi, I am
working on another project which has no moving footage, just high quality JPEGS and Photoshop files. Could someone make a sequence setting suggestion as I start this project. Everything will be encoded at highest quality. Also, is there a sepia filter in Ppro or After Effects that I missed/ Thanks Roman
P.S. Is there a work around for the Sepia if there is no filter. Thanks again

Could someone make a sequence setting suggestion as I start this project.
You should use a sequence setting that matches your intended delivery format.
Also, is there a sepia filter in Ppro
You can get a decent sepia look using "Tint" along with "Brightness and Contrast".
Effects > Video Effects > Color Correction
If you need more control of your tinting, you might consider doing your
color correction / tinting in After Effects.

My little red circle with a 1 in it that looks like an update, is on my MAC desktop, I have no idea what it is for or how to get rid of it

On my desktop on the dock, where the calendar app is, there is a rd circle with a 1 in it like the ones on iphone that show up for u pdates, I have never seen this on my desktop, does anyone know what it means? I don't think it is for an update?

Cheryl,
The number "1" means that you have an event invitation. Open iCal and use iCal>View>Show Notifications to choose what to do with the notification.

New iMac for wife, how to get all her iPhone info into iTunes on new iMac?

I bought my wife a new iMac and she has been docking her iPhone 3G on the family iMac and the family iTunes. Now she wants to dock her iPhone on her computer and her iTunes but still have access to all the music and movies we have on the family iMac. How do I do this? Thanks

you could use home sharing in itunes to allow her to move music/movies between the family computer and her computer. http://support.apple.com/kb/ht3819

WebGL for Mavericks, how to get it ?

Similar Messages

Maybe you are looking for