WebGL not working
I recently noticed that WebGL no longer works for me in Firefox, even though it has worked in the past. I'm currently running Firefox 14.0a1 Nightly on Window 7 64-bit (although I have also tried it in FF11). When I opened, up about:support, it said "Blocked for your graphics card because of unresolved driver issues.", even though I have the latest driver for my NVIDIA GeForce GT 540M GPU. I also haven't touched anything related to WebGL in about:config.
I've heard that Firefox doesn't play nice with Optimus. Could it be that, possibly? Should I update my Intel Graphics driver?
Sorry I do not know the answer. I do note another thread suggested changing prefs to remove a similar block.
''pekelney'' in [/questions/865633#answer-235634] said
If the user has a blocked driver, then open: about:config Then double click on: webgl.force-enabled=false This will change it to: webgl.force-enabled=true
Restart Firefox and WebGL will work.
I also note there was a regression causing problems with NVIDA & some 3Dgraphics, but the problem seems to have been resolved: [[3D videos do not work with certain NVIDIA drivers in Firefox 11]]
In a more recent post [/questions/897556#answer-276685] ''cor-el'' suggests
Try to reset all gfx.blacklist prefs.
*http://kb.mozillazine.org/about:config
Similar Messages
-
WebGL does not work on Windows 8 with NVidia (650M) cards
Hi, I`m working on WIndows8-64 and NVidia 650M GPU.
I use FF 17.0.1.
WebGL does not work until I set "webgl.force-enabled=true".
Can this be fixed to work by default ?
ThanksThe Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article. -
My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage -
Drop down menus not working in Firefox 24.0
Drop down menus not working in Firefox 24.0 but they still work in Safari/IE/Chrome.
http://www.horizonhomes-samui.com/
I'm using Windows 8.OK
Application Basics
Name: Firefox
Version: 24.0
User Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Firefox/24.0
Extensions
Name: Adobe Acrobat - Create PDF
Version: 1.2
Enabled: false
ID: [email protected]
Name: Wondershare Video Converter Ultimate
Version: 6.0.0
Enabled: false
ID: {8D150B8F-EFE8-45a3-A4A3-053020F48FAC}
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
browser.places.smartBookmarksVersion: 4
browser.startup.homepage_override.buildID: 20130910160258
browser.startup.homepage_override.mstone: 24.0
browser.urlbar.autocomplete.enabled: false
extensions.lastAppVersion: 24.0
gfx.direct3d.last_used_feature_level_idx: 0
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1382343540
places.history.expiration.transient_current_max_pages: 104261
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1382343540
Graphics
Adapter Description: Intel(R) HD Graphics 3000
Adapter Drivers: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Adapter RAM: Unknown
Device ID: 0x0116
DirectWrite Enabled: false (6.2.9200.16581)
Driver Date: 7-31-2012
Driver Version: 9.17.10.2828
GPU #2 Active: false
GPU Accelerated Windows: 0/1 Basic
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics 3000 Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: none
AzureFallbackCanvasBackend: cairo
JavaScript
Incremental GC: true
Accessibility
Activated: true
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10
Version in use: 4.10
NSS
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSSMIME
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSSSL
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSUTIL
Expected minimum version: 3.15.1
Version in use: 3.15.1 -
[Solved] WebGL stops working randomly in Chromium and Firefox
Hi
I'm using a Thinkpad x220 with an Intel GMA 3000 chipset, using the xf86-video-intel 2.99.912-2 driver for X11 and mesa 10.2.4-1 for OpenGL.
OpenGL is detected and working fine locally, glxinfo lists it, glxgears runs as do OpenGL-based games.
Yesterday, I updated my graphics drivers and now WebGL is not working most of the time.
When I open http://doesmybrowsersupportwebgl.com/ right after starting X11, it shows 'Yay' and lists the details of the WebGL capabilities of the browser. However, when I refresh the page a few times and/or restart the browser, it stops working and shows 'Nay'.
I will try downgrading the packages to see if this is actually related to the update (I never consciously used WebGL before so the issue may have been there for a while). I also tried fiddling with WebGL/GPU-related settings
chrome://flags
(Chrome) and
about:config
(Firefox) but that had no influence whatsoever and since it works sometimes I don't think it's a browser isseu.
What could be the cause of this and where should I look for clues? If the GPU crashed, X11 would crash as well, wouldn't it? Can I make error messages emitted by the graphics driver appear in the Xorg log files? Did anyone here have a similar issue with the same chipset or not have the issue with a different setup?
Thanks very much for any responses!
> glxinfo | grep "OpenGL version"
OpenGL version string: 3.0 Mesa 10.2.4
> uname -a
Linux hermes 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64 GNU/Linux
> chromium --version
Chromium 36.0.1985.125
> cat /etc/X11/xorg.conf.d/10-intel-font.conf
Section "Device"
Identifier "Intel"
Driver "intel"
# Option "AccelMethod" "uxa" # made no difference
# Option "AccelMethod" "sna" # default
# Option "AccelMethod" "glamor" # X11 won't start
# Option "DebugWait" "true" # made no difference
EndSection
Last edited by kba (2014-07-25 14:25:44)For all the folks who might run into the same issue: The problem was that the environment variable
LIBGL_ALWAYS_INDIRECT=1
is being set by compiz, my window manager (see https://bugs.launchpad.net/ubuntu/+sour … comments/4. Now, when I start any program, such as a terminal or a browser, from compiz using key bindings, direct rendering to the graphics card is disabled and so is WebGL.
The fix was to disable 'Indirect Rendering' using either Compiz Fusion Icon or by setting the env var before compiz starts. -
Not work tablet UI on Prestigio 5080 PRO tablet
I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.
Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team -
Why self-defined access sequences of free goods can not work?
Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advanceDear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali. -
Adobe bridge raw not working with windows vista in photoshop cc, why?
adobe bridge raw not working in photoshop cc, is there a fix?
Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista. -
Adobe Bridge CS5 in windows 7 not working?
Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager -
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html -
Partner application logoff not working
We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
ThanksHi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem -
IPhone 4 Voice Memos not working/saving
Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1 -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Ideapad A1-07 tablet wifi-bluet​ooth does not work!
Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.
Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Polygonal lasso tool not working with stylus on Surface Pro 2
Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scottsame problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly
Maybe you are looking for
-
Download error under apps. After following download steps multiple times still showing error message.
-
Garmin GPS Model: 1370T SKU: 9904727
I note this can be purchased for $89. Does it come with lifetime upgrades. I have a nuvi that is about 4 years old, and recently determined that it needs to be updated, when it took me 20 miles longer, due to new roads. I then learned that it is goin
-
OnStatus never called in FlashLite 3.0 ?
We have a small app which displays Video clips to the user, then at the end, displays some message. The problem is, the callback "onStatus" does not seem to be called on clip complete (as it should) on any player version. On the other hand, on FL2.x,
-
DDIC Activation Error during import of KB64002
Hi, I'm running WebAS ABAP+J2EE system on Win2K/Oracle9.x environment with XI3.0. I've already applied KB64001 patch successfully.But when i appled KB64002 patch, the import went for around 18 hrs. when i checked the process overview, i found no proc
-
Help needed with tables in iWork pages
Hi, When I have a table in microsoft word I can fill it with all the content I like and it will run on page to page. In Pages however, a row (along with the rest of the table below) will split off and start on the next page if threre is too much con