WebGUI / GUI for HTML for CRM

Hi @ all,
I recently start to work with sap and Ive no idea where to get the needed information. I hope somebody here can help me.
Does somebody know where I can get a well-explained documentation about webgui for crm?
Further Ive got questions and maybe somebody can answer them:
What exactly is the difference between WebGUI and PCUI?
Does a technical difference exists between WebGUI for CRM and WebGUI for other moduls (e.g. SCM, HR).
thanks in advance

Firat
    Apart from the IC Web , we have  IC WinClient.
  The Interaction Center (IC) WinClient is a SAP GUI-based agent desktop interface for interaction center agents that provides a framework for processing IC WinClient functions. It can be used for any business transactions via phone, e-mail, chat, paging, Web call back, or voice-over Internet Protocol (VoIP).
Coming to the point, If we have an  [SAP ITS|http://help.sap.com/saphelp_crm50/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm]   installed, then we can access the Transactions via Web. ie the Web browser can communicate directly with the SAP system.
Try the below link and it would realy help to understand the various UIs available from SAP .
[UI Technology from SAP|http://help.sap.com/saphelp_crm50/helpdata/en/e7/c7af3fda5a3c17e10000000a114084/frameset.htm]
Also I hope this helped  you to understand UIs (depending upon the Business requirement either IC Web/Win, SAP GUI, WEB) available in CRM and in general SAP.
Thanks
Allot points if this helps and close the thread if you are satisfied !

Similar Messages

  • UWL: enabling the web GUI for html for work items

    Hi,
        We have configured UWL in portal. All the backend work items are appearing in the UWL iView in portal.
    But when we click on some of the work items SAP GUI opens instead of web GUI for html.
    Does any one have information what needs to be configured in UWL configuration xml file so as to enable the web GUI for html for rest of the work items?
    Regards
    Sk

    Hi,
        We have configured UWL in portal. All the backend work items are appearing in the UWL iView in portal.
    But when we click on some of the work items SAP GUI opens instead of web GUI for html.
    Does any one have information what needs to be configured in UWL configuration xml file so as to enable the web GUI for html for rest of the work items?
    Regards
    Sk

  • Problem With SAP GUI for HTML iView

    Hi All,
    I have created a transaction iView(SAP GUI for HTML) for the T code SE12, when I view the iview, it get loaded for the first time and if I log out and when i again login to the portal and view the transaction iview it is not getting loaded. If I clear the cache(By pressing Ctrl+F5) the same iview get loaded.
    Could any one help me in solving this problem
    Regards
    Sivaprasath

    Hi Shiva,
    For SAP transaction iViews better to use SAP GUi for Windows option instead of SAP GUI for HTML.
    Hope it helps for you..
    Cheers
    Phani

  • Error when testing SAP GUI for HTML

    Hi experts,
    i am getting the error "Service cannot be reached - the termination occured in system <sysid> with error code 403 and for the reason forbidden" when I test the service SAP GUI for HTML for transaction sicf. I am able to enter mit username and apssword und click login, and then iI get this error. Can anyone give me a hint?
    Kind regards,
    Simon

    Hi,
    Try publish all services on R/3, using SIAC_PUBLISH_ALL_INTERNAL transaction.
    Hope this helps,
    Iván.

  • NWBC for HTML Layout

    My nwbc for HTML, for one system, looks like this: The icons don't appear; I couldn't close the launchpad navigation, and appears masthead, end of masthead ammong other things in the shell.
    When it should look like this:
    Can anyone explain me why this happens in one system and not in the others. I have the same software versions in all systems.

    Hi  Melinda Ludanyi ,
    I just finished implementing the necessary notes to update the Unified Rendering and nothing changed.
    Is there a place in the system where you can customize the shell?
    Thank you for your time.

  • Browser is not opening from the webgui or SAP GUI for HTML

    Hi Experts
    I am in critical scenario how to work on the below scenario.
    I have installed an NW7.0 with few functional components.as per the user request i had activated webgui and it is working fine in internet.for this we have done the following steps.
    1. Activated the webgui/mimes in SICF
    2. published in SE80 for WEBGUI and SYSTEM.
    3. Created a reverse proxy in Micrsoft ISA through our network team for the internet users.
    example : http://servername.xyz.com:8005/sap/bc/.../webgui
    reverse proxy URL : http://sapabap.domain.com/sap/bc../webgui -- working URL
    i could access sm50,sm21 and so..on.But when i try soamanager transaction or any other transaction which picks a browser and display the screen which is not working. It picks the intranet link or servername with port( http://servername.xyz.com:8005/sncrr or soamanager..).Is HTTPS is required to enabled ( ithink not necessary since it is an secured login procedure.) i could able to see in se80settingsITS Tab --servername.xyz.com:8005
    May i know why it does not picks up the reverse proxy URL. I have tried with hosts file with many options but is it not working
    Regards
    Bala

    Hi Bala,
    If you go to transaction SE80 -> Repository Information System -> Other objects -> Transactions and you search for SOAMANAGER, you get into the screen where you can modify attributes for this transaction. Please check if there are strange values entered in there... Or maybe SAPGUI for HTML is not selected.
    Kind regards,
    Mark

  • Tcode PA70(Fast Entry) using SAP GUI for HTML

    Hi Gurus,
    when i am copying data(one row) from excel sheet into infotype using
    tcode PA70(Fast Entry),through EP(transaction iview Created Using SAP
    GUI for HTML).
    enter TCODE PA70-> select Recurring Payments/Deductions -> click
    create -> copy the data from excel sheet and past
    The whole row of data is copied into one field . the data is not copied
    into the corresponding fields.
    please find the screenshot.
    <a href="http://img337.imageshack.us/i/guiforhtml.jpg/">[IMG]http://img337.imageshack.us/img337/1723/guiforhtml.jpg[/IMG]</a>
    Uploaded with <a href="http://imageshack.us">ImageShack.us</a>
    Regards
    K Naveen Kishore.

    Hello Naveen,
    I don't think this is possible.  Please see note 314568 about the limitations of the SAPgui for HTML (webgui), the "Clipboard access" section seems to describe this limitation.
    Edgar

  • ALV GRID  and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

    Hi All,
    We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
    We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
    We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
    If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
    We are on Basis Patch level 15.
    Does anyone have any ideas on how to fix this?
    Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
    Thank you so much!
    -Kevin

    Hi,
    Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
    Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
    If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
    Thanks!
    -Kevin

  • How to hide the menu bar from a Transaction iView (SAP GUI for HTML).

    Hello all,
    I have created a simple SAP Transaction iView of type SAP GUI for HTML.  This iView has the Menu bar that has the buttons: Menu, Back, Cancel, and System.  My requirement is, I dont want to see the menu bar that has these buttons.  How do I go about it?  Please advice.
    Note:  My iView is a SAP Transaction iView and not IAC service related iView. 
    Thanks
    Vicky R.

    You'll want to set the parameter ~webgui_simple_toolbar in your webgui service.
    It is a binary parameter with the following values/options:
    0  : Hiding the page header completely (not recommended)
    1  : Standard setting
                        This is the recommended standard setting in which the title and the menu bar below it with the [Exit] and [Help] button and the application buttons are displayed.
    2  : Displaying the title line
    4  : Displaying the buttons [Exit] and [Help]
    8  : Displaying the active system buttons on the screen ([Back] and [Cancel])
    16  : Displaying the system menu
    32  : Displaying the application buttons
    128 : Deactivating the information block in the status bar (new)

  • Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

    Hello all,
    I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
    I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its -><b>webgui</b>
    After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
    Can someone help? How can I hide the OKCode field and Menu bar?
    Thanks and Regards,
    Reena

    Hello Reena,
    Maintaining the parameter
    ~WEBTRANSACTIONTYPE   EWT
    will solve your problem. You can also create an IAC iview. Here is a document for the same.
    <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
    Also remove the parameter ~noheaderOkCode.
    Hope that helps.
    Regards
    Deb

  • SAP GUI for HTML

    Hello Everyone,
    I have successfully implemented XSS on our portal. Also, UWL is configured and working correctly. However, upon trying to access SAP GUI for HTML through the UWL, I get an error. This is an example of an error:
    Transaction SWNWIEX+CURRENTWINDO is unknown
    This is when clicking the link of a PCR request in the tracking tab of the UWL. It opens SAP GUI for HTML in a new window using the UWL - Launch SAP Transaction iView.
    Does anyone have any idea why this happens?
    Regards,
    Motaz

    Hello Motaz,
    First of all, you are welcome to join the ITS/WEBGUI forum [here|Internet Transaction Server (ITS);.
    About your issue, I am not sure about the SAP_BASIS version of your system, but maybe SAP note 1360904 is the solution!
    At last, but not least, you may find [this Wiki article|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22375] interesting.
    I hope this helps.
    Best regards,
    Cristiano

  • SAP Logo/Title Bar (SAP GUI for HTML)

    Hello all,
    Anyone know how to disable the SAP logo/title bar that appears via an SAP GUI for HTML transaction (ie. PZ56)?  I'm trying to get the transaction to show in the Portal using the SAP Transaction iView, but it displays this SAP title bar with the SAP logo which I don't want.
    Thanks,
    Mike

    hi Mike ,
    this can be done using the Configuration.
    Go to transaction SICF and see the webgui internet service .
    in that , you will have a button called GUI CONFIGURATION
    and then, you insert another parameter caller ~noHeaderOKCode to 1 which will solve your problem.
    Hope this helps...
    Take care
    Anil

  • SAP transaction iview of GUI for html never works

    Hi All,
    We are implementing ESS/MSS on EP 7.0, ECC 6.0, ESS/MSS 600 landscapes for India Country grouping.
    There are few SAP transaction iviews of type GUI for html and we tied up those to ESS Overview homepage framworks.
    However, each of these transaction iviews throws the same error messages as below :
    Error when processing your request
    What has happened?
    The URL http://hostname.domain:8001/sap/public/bc/its/mimes/system/sl/page/menubase.html was not called due to an error.
    The following error text was processed in the system TD1 : This function is not possible
    The error occurred on the application server TCSCQ1_TD1_01 and in the work process 0 .
    The termination type was: ERROR_MESSAGE_STATE
    The ABAP call stack was:
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP.
    I have activated all of the ITS services from sicf transaction. Published all of the services (global, webdui, webdui_start, system, shuffler) to internal.
    I also executed the Webgui service from sicf tcode. But, still the same error message persists. Am I missed any settings for Integrated ITS ?
    When I enabled option (Display a notification about every script error) from IE options, the system keeps on giving the mesage 'window.wgu.global.eventhandler' is null or not an object, wgu.ObjEventHandler' is undefined etc.,
    I have noticed that none of the ITS services never work.
    I would appreciate if anyone can shade some light regarding this issue. Any guidance or inputs in this context would be of greatfully help.
    Regards,
    Anil Kumar.

    Please don't cross post messages....

  • Connect to SAP R/3  using SAP GUI for HTML through saprouter

    Hello,
    I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string,  but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
    Thanks in advance.

    thanks, I can get the data from SAP R/3 to crystal report.
    but still dont know how to do the second question mentioned in previous message:
    once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted.

  • WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

    Hello,
    I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
    Any help is greatly appreciated,
    Bert

    Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
    Cheers

Maybe you are looking for