~webgui_simple_toolbar parameter not working in ITS 7.0
Hi Experts,
I want to disable the back and cancel options in my webgui HTML pages.
To make this i have used the parameter called ~webgui_simple_toolbar with value 18, why 18 is, as per the note 1010519 i have taken these values.
But still i am getting back and cancel options in my webgui.
Do anybody faced this problem, if so please suggest me to resolve it?
My landscape is NW2004s Integrated ITS7.0, SAP_BASIS-splevel 11.
Your inputs will be highly appreciated.
Thanks,
Sireesha.B
Hi Sireesha,
as note 1010519 says:
<i><b>Reason and Prerequisites</b></i>
Use the ~webgui_simple_toolbar service parameter to activate the simplified page header without menu and OKCode field.
The parameter is (scheduled to be) available as of
external ITS 6.20 patch level 25
NetWeaver2004 Integrated ITS 6.40 Basis Support Package 20
NetWeaver 2004s Integrated ITS 7.00 <b>Basis Support Package 12</b>
==> as simple as that: you are on 11...
Hth,
Michael<i></i>
Similar Messages
-
my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..
Hello Prakharfromindia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Have a nice day,
Mario -
Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist
The Battery icon with the "X" indicates that your computer does not detect a battery and is operating on electrical power from AC since your computer is plugged in. If your battery is installed but not detected that indicates a problem: 1. the battery is dead; 2. the battery connector is not functioning properly. You mention that there is no response from the indicator lights so it could be either of the two possibilities. The noise is not a good sign. Best to shut it down safely while you can to prevent any possibility of damage and get it to an Apple Genius Bar or Authorized Apple Service Provider to discover the nature of the problem
-
I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??
Since it is only the headset that is the problem and not the iPhone it would be better to just buy a new set and not let yourself be frustrated over it. If you send anything to your sister before the one-year warranty is over, include the headset so she can exchange it at an Apple store.
-
i lost my apple shufle's(2 generation) charger 3 months ago,i bought a new one(charger) and the ipod is not working now.its completaly dead.when i lost the charger the battery was finished.now with the new charger its like its broken,help please
There is no way to remotely track or disable an iPod nano, either for you or Apple. As it can't connect to the Internet on its own, Find my iPhone isn't available for it.
(84600) -
Both bottoms of my phone is not working seems its hanged its iphone 5
I was changing the apple ID in my phone but suddenly its been hanged out and non of the bottoms are not working and its in setting and its not come to OS and even I cant turn it off
Apple will replace it if it is still covered by the 1 year warranty, it hasn't been damaged, and you take it to an Apple store in the country of purchase.
-
HT201210 My Ipod will not work anymore its just the apple showing could you please help me restart
My Ipod will not work anymore its just the apple showing could you please help me restart?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
SET/GET Parameter not working? pls hlp
hi i am using a transaction variant on transaction LT01 - create transfer order. using the transaction variant i have greyed out 3 fields on the initial screen. for the greyed out fields i am passing the values using a SET PARAMETER. This is working fine for 2 fields but it does not work for the third field. any idea where i am going wrong?? the first field is warehouse number which is working fine. the second field is movement type and the third field is storage location. the first 2 works fine and the data gets populated in the greyed out field but the storage location field does not work. The field has a parameter id. pls help its urgent.
promise will reward points if its resolvedHi american,
1. but the storage location field does not work.
In such cases, we have to follow another approach.
(CALL TRANSACTION USING BDCDATA
2. Just copy paste in new program.
(it will populate the STORAGE LOCATION field)
3.
report abc.
data : bd like table of bdcdata with header line.
bd-program = 'SAPML03T'.
bd-dynPRO = '0101'.
bd-dynbegin = 'X'.
append bd.
CLEAR BD.
bd-fnam = 'LTAK-BWLVS'.
bd-fval = 'AAA'.
append bd.
bd-fnam = 'LTAK-LGNUM'.
bd-fval = '015'.
append bd.
STORAGE LOCATION
bd-fnam = 'LTAP-WERKS'.
bd-fval = 'AAA'.
append bd.
CALL TRANSACTION 'LT01'
USING BD.
regards,
amit m. -
Password parameter not working while Installing the certificate hosted on a Web Application Server
Hi,
We are trying to secure our SAP BI Mobile connection with certificates. According to the manual we are storing a password protected certificate on a network location.
On our ipad when I open the link: (according to manual: Administrator and Report Designer's Guide , chapter 4.14.2.1 Installing the x509 Certificate on Device)
SAPBI://action=downloadcert&certurl=<Download URL>&Password=abc123
It should open and install the certificate in the app without asking for the password. But thats not working. It does ask for the password. So I can access the certificate location and after entering the password it works. But I am giving the password parameter in the link so why is this not working?
The guide is a bit contradictory, and I quote:
"If you access the second link above: The application is launched and the certificate file is downloaded from the URL location (certurl).
The certificate is directly installed on the device."
But second quote:
"NOTE:
Since the password is already included in the URL, the application does ask the user for the password...."
My question: what is the use of this password parameter if you still have to enter it manually?
Does anybody know if this should work, and what I might be doing wrong?Hi , i am facing the same issue. I'll open a incident.
Martin -
PDF preview not working in ITS after patch31 - HTTP 404 file not found
Hi Friends,
We installed Patch 31 on ITS 620.
Previousl patch level was 17.
The functionality to show pdf preview using FM 'SSFCOMP_PDF_PREVIEW' is not working.(Which is working fine when viewed from SAP GUI)
We are getting 'HTTP 404 - File Not Found' error.
What could be the reason?
Any help on this is highly appreciated.
Thanks,
Simha
Edited by: Simha on Oct 30, 2008 3:03 AMproblem not resolved and we reverted back to older patch.
Closing this thread -
REST Web Service Output Parameter not working in POST Handler
I've created a RESTful Web Service in Oracle Apex, using a POST method as "handler". I've setup 11 input parameters which all work fine, it is my one output parameter that does not return successfully.
Here is detail on the Output Paramter
Name: returns
Bind Variable Name: :returns
Access Method: OUT
Source Type: Response
Parameter Type: String
The actual source is a call to a pl/sql package that returns a value that I set :returns equal to (eg :returns := v_result). I've tried this with Source Type Header and still the same result, 'no output'.
I see APEX is calling wwv_flow_api.create_restful_param to generate the parameters (for importing), is there any documentation on this procedure?
How can I get this output parameter to return something in the response?
The request accepts a Json payload.
Any help greatly appreciated
Thanks,
JamesSolved my own problem :returns does not work needs to be returns
Does Not Work
Name: returns
Bind Variable Name: :returns
Access Method: OUT
Source Type: Response
Parameter Type: String
Does Work
Name: returns
Bind Variable Name: returns
Access Method: OUT
Source Type: Response
Parameter Type: String -
ABAP HR payroll not working es its working fin
Hi friends ,
i cannot run the payroll from 4 months ,earlier it was working fine but wen i try to run for december in the month of January it is not working i select payroll area make all the entries like other period,,payroll schema, which i used to do when i mark a ceck box run test with no updates it is working fine , wen i try to run with out this check mark its giving error log " a date specification for 01 not exist for 99 01 01 2011 01 ". kindly provide me the steps for trouble shoot.
Moderator message: cross-post locked.
Edited by: Thomas Zloch on Apr 6, 2011 4:39 PMI will tell tommorow..i need to check it today..
-
Returning Clause out parameter not working
I have Oracle 11g (I think?) and VS2010.
I am using an insert statement with the returning clause to return an identity value that is created by a Sequence/Trigger. The problem I am having is that it is not updating the out parameter in C#. Here's some sample code. I have tested the insert statement in SQL Developer and it works. The C# statement does do the insert, but the out parameter remains null. I have tried ParameterDirection as ReturnValue, InputOutput, and Output. None of those worked. The output value remains null no matter what I try to do. I even lifted this example (Oracle Sequences), ran it, and it also errored and is not returning out parameters. (Error Msg: Unable to cast object of type 'Oracle.DataAccess.Types.OracleDecimal' to type 'System.IConvertible'.Couldn't store <null> in ID Column. Expected type is Int32.).
I have searched and searched the web over and I cannot figure out why this does not work. Any help would be most appreciated!!
MyTable
MyTable_ID Number (38)
Note Varchar2 (500 byte)
=================================================
try
if (insertCmd.Connection.State == ConnectionState.Closed)
insertCmd.Connection.Open();
int recs = insertCmd.ExecuteNonQuery();
this.Id = Convert.ToInt32(insertCmd.Parameters[":Id"].Value);
catch (Exception err) { }
finally { insertCmd.Connection.Close(); }
private OracleCommand insertCmd
get
OracleCommand insCmd = Context.DataBaseConnection.CreateCommand();
insCmd.CommandText = string.Format(
@"Insert into MyTable (Note)
Values (:Note)
Returning MyTable_ID into :Id");
insCmd.Parameters.Clear();
OracleParameter noteParam = new OracleParameter(":Note", OracleDbType.Varchar2, Note, ParameterDirection.Input);
OracleParameter idParam = new OracleParameter(":Id", OracleDbType.Int32, 38, "Calibration_Session_Id");
idParam.Direction = ParameterDirection.Output;
insCmd.Parameters.Add(idParam);
insCmd.Parameters.Add(noteParam);
insCmd.BindByName = true;
return insCmd;Okay, I changed my insert command text to this...
insCmd.CommandText = string.Format(
@"Begin
Insert into MyTable (Note)
Values (:Note)
Returning MyTable_ID into :Id;
Commit; End;");
There was no change. Am I doing an explicit transaction wrong? -
Hosts.allow option spawn parameter not work
Hi,
I would like to use BlockHosts and spawn it with spawn keyword from hosts:allow, but option parameter does nothing for me.
I tried several configurations with different sshd entries and results are below
hosts.deny:
ALL:ALL:DENY
With hosts.allow:
sshd:ALL
I can connect to sshd.
With hosts.allow:
sshd:ALL:DENY
I can still connect to sshd. But I do not know why.
With hosts.allow:
sshd:ALL:spawn (echo "some tries to log" >> /var/tmp/sshd.tmp)
I can connect but nothing is written to temporary log file.
With empty hosts:allow I cannot connect to sshd.
I cannot find any clue, from man entry everything seems clear, but it does not work as it is written in doc.
Thanks,
Ondra
Last edited by xnovako2 (2010-02-20 16:53:23)the Access files are read in order of /etc/hosts.allow, and /etc/hosts.deny
by default, /etc/hosts.deny contains ALL:ALL:DENY, only the first two are important, then third DENY is the placeholder for shell scripts, only the first two are considered, so ALL:ALL means that all daemons for all connections will not be allowed access, you can specifically add a specific service like sshd using sshd:ALL in /etc/hosts.allow to allow access.
sshd:ALL:DENY, the DENY part is the place where you should put the location of your shell script (absolute path), writing DENY will not deny it access
http://linux.die.net/man/5/hosts.allow
use the above link for a complete help on this. -
i have purchase iphone4 from gray market,it is not factory unlock,how can i get it factory unlock,
its safari not working and it is not showing drive in my computer.iPhones are sold in carrier-locked and unlocked versions. If the phone has a carrier lock on it, you must contact the carrier to have it removed (you probably need to bring the phone to the carrier for the process). If you don't know the carrier, you won't be able to get it unlocked. US carriers will not remove the carrier lock and it cannot be removed.
How is Safari behaving that makes you say that Safari is not working? The lock status of the phone won't affect Safari, except that if the phone is locked and you aren't using the carrier (and SIM provided by the carrier) to which it is locked, then you can't use the phone or 3G service, only Wi-Fi.
The iPhone should not appear as a drive on your computer, so there's no error there.
Maybe you are looking for
-
I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?
-
How to include Special G/L Indicator in MIRO screen
Hi all, There is a scenario, where the invoice has a retention sum value and user request to input it during MIRO. Example: PO Value = RM100 GR Value = RM100 (100%) IV Value Physical = RM100 with 10% retention sum. So IV in SAP should be: Debit
-
My computer is the Mac OS X Version 10.6.8 and I am unable to install the new iTunes 11.4. After I installed it, it said that once I restarted my computer, the new iTunes would be there. I restarted my computer and it is still the old version of iTun
-
"Object is invalid" after three loops
This script is placing objects on pages (in reverse order, as it happens). It works correctly for three pages, then stops and gives me the following error: Object is invalid Line: 15 Source: img = doc.pages[pageNo].place(fileList[a]); I have no clue
-
The past two times I have opened iTunes, it asked me to sign in, so I did. Then it starts re-downloading songs I have already purchased. I have 3 of the same song in my purchased music folder. Will I get charged for that? Also, do you know why it kee