WebGUI TCode Entry Field

With ECC 6, the transaction field box in WebGUI (SAPGUI for HTML) is closed by default.  What parameter do you set to make the tcode field open by default?

This is the default behaviour. I an not aware of any parameter that you allows you to over ride this.
One would have to change the template "GUI_CUA.html" to make the field visible
SE80 -> Internet service "WEBGUI", open the template DM/GUI_CUA under      
"WEBGUI/Theme DM/HTML Templates

Similar Messages

  • On Android 4.2.2 on a Nexus7 tablet - No Firefox button and most text entry fields do not work at all

    I installed Firefox 19.0.2 and appears to be ok, but I don't see a Firefox button anywhere, so I cannot access any of the functions that it controls, such as bookmarks, which is why I installed it!
    The ASUS Nexus 7 tablet shows up as a supported platform.
    I set it as the default link browser, but quickly realized that I could not enter text into any data entry fields, so I reset the default back to Chrome, which works fine for that.
    I installed Firefox because bookmarks in Chrome are very lame, but I can't use bookmarks at all in Firefox, so again Chrome wins.
    Any suggestions, before I uninstall it?

    I am now a Democrat supporter. dccc.org does accept text input from my mobile.
    The forum problem I mentioned earlier is apparently a known issue but only affecting legacy phones.

  • The length of the password entry field in the BEx Analyser

    Hi,
    The password is 8 characters in the BW system.
    When users changing their newly assigned passwords. When logging into the BEx Analyser, and prompted to change the password, a password entry box is displayed, with an entry field longer then 8 characters. Some users are therefore entering passwords longer then 8 characters. This is fine when they first login, but when they try come back to the system, their logon fails.
    Can something be done to restrict the length of the password entry field in the BEx Analyser?
    Many Thanks
    Jonathan

    Hi Jonathan
    we are having the same problem - did you find a way to resolve this?  I did not find any SAP notes referring to the issue.
    Regards
    Hayley

  • Popup with 1 entry field?

    hi guys
    im looking for a FM with 1 entry field with text and numbers.
    this pop up must exist but i cant find it.
    tks in advance.

    Sure, check this out.
    report zrich_0001.
      data: ivals  type table of sval.
      data: xvals  type sval.
      xvals-tabname   = 'VBAK'.
      xvals-fieldname = 'AUART'.
      append xvals to ivals.
      call function 'POPUP_GET_VALUES'
           exporting
                popup_title     = 'Choose Order Type'
           tables
                fields          = ivals
           exceptions
                error_in_fields = 1
                others          = 2.
    read table ivals into xvals index 1.
    write:/ xvals-value.
    Regards,
    RIch Heilman

  • Text entry fields not able to tab between 2 fields

    Hi there,
    I have placed 2 text entry fields that are for username & a password, I on publish/preview, I type the username and go to hit the TAB key to move to the password field but nothing happens & cursor does not move to the other field...
    I did try a quick search for this question as I thought it must of happened before to others, but could not find what I needed..the answer ;-)
    Kind Regards
    Rossco
    DOH! I just found some more information on tabbing between these fields, so will check that out fisrt........must be Friday (over here)

    Hi There,
    Welcome to Adobe Forum.
    Have you tried using the shortcut option assigned as "Tab" in the action properties of the text entry box as shown in the following image:
    Thanks
    Loveesh

  • MIGO - Blank out the Qty in unit of entry field on PO receipt

    Within MIGO upon PO receipt, standard behaviour is that it defaults Qty in unit of entry field to the total remaining outstanding qty.
    Customer has requirement to blank out the Qty in unit of entry field on PO receipt.
    We have looked at Business Add Ins for MIGO (e.g MB_MIGO_ITEM_BADI, MB_MIGO_BADI etc) and does not appear to be feasible.
    Does anyone know a way to do this ?
    Regards.
    Phil.

    Hi Joyce Roessner
    Could you please check in MB01 t-code & see quantity field is open for edit or not.
    This is controlled at Field selection & can be customised at fuctional level.
    Make GOITEM-MENGE as Input at follwoing path
    SPRO>MM>INv Mgmt & Phy Inv > Settings for enjoy trans>Settings for goods mvt(MIGO)>Field selection for MIGO
    Thanks,
    Mahesh

  • Replication error BP from CRM to R/3 - "Fill in all required entry Fields"

    Dear Folks
    I have maintained all steps mentioned in building block - C03. I have maintained separate account group approach. Made sure that number ranges are in sync in both the systems. Particularly in PIDE, mapping classification Consumer-Org 'A' to 'ZZ01' (Copy of 0001).
          I changed all required entry to optional entry in my 'ZZ01' field status using OVT0.
           But when i replicate using R3AS, i get an error 'Fill in all required entry Fields" - Error in receiving system (i.e R/3).
           I tried manually creating customer in R/3 with the account group ZZ01. Surprisingly it does not allows me to save unless i give the reconcillation account entry, even though it is not a required field.
       Please let me know for further details and Please help me to resolve this error. I am in real urgency.
    Thanks
    Keerthi
    Chicago IL
    507 401 1030

    Hi Karunakaran
            Your reply answered my question of creating customer with no 'recon' a/c required entry. Thanks awarded 2 points.
              My replication error is still hanging around. I found that It has no bearing on the 'Reconcillation A/c' required entry.
              Some other field is still restricting my BP Role- Consumer:Organization to replicate. The error still showing as "required fields are not entered in R/3", even after suppressing "Reconcillation Account".
           I think my reference customer master i created in R/3 using VD07 is not assigned in case of the account group Consumer:Organization.
       But i don't know how to verify my doubts and get rid of this error.
    Please help, in great urgency.

  • BAPI_TRIP_CREATE_FROM_DATA Fill in all required entry fields

    Dear community,
    We are trying to use the function "BAPI_TRIP_CREATE_FROM_DATA" for a new customer program to create trips for the employees. When we try and use this function to create trips, it returns an error message saying "Fill in all required entry fields".
    We check the ABAP code and found out that the WBS element was not being correctly imported to the screen, thus giving the error message (because the WBS is a mandatory field).
    We have already checked some SAP notes regarding this issue, and only found one regarding the WBS ELEMENT field name, but that note is already implemented.
    We discovered a program called "RPTTIZ_BAPI_TEST" and used it to check what we were doing wrong. But, also this program gives the same error message when we executed:
       BAPI Test: Import Trip, Delete Trip, Recreate Trip
      15:58:57
      BAPI_TRIP_GET_DETAILS
      S56804The selected method was performed successfully
      BAPI_TRIP_DELETE
      S56195The current version of trip 0000036827 was deleted
      BAPI_TRIP_CREATE_FROM_DATA
      E00055Fill in all required entry fields
    Everything went okay, except the creation of the trip. We found out that it was because of the WBS ELEMENT field.
    Do you know if this BAPI is obsolete or not in use anymore?
    Does anyone has an example or an idea for whats happening?
    Thank you all for your help.
    Regards,
    Filipe Barata
    Accenture

    Hi ,
    Kindly let me know how to make the Field visible in ESS Portal screen after making change in V_T588MFPROPC.
    Because I am facing the Same problem but it is for IT-9(Bank Details) Subtype 5(Main Offcyle Bank) and Subtype 6(Other Offcycle Bank).
    I have added the required fields in table V_T588MFPROPC, but not able to view those fields in ESS Screen, though I am sure it is considering those fields because for 2 Fields which I made mandatory , I am getting error in ESS Screen 'Fill in Required details', but only thing is not able to view the Fields on ESS Screen but getting error.
    Kindly let me know , how can resolve the error.
    Regards,
    Ketal Parikh

  • Can I generate a CR (Carriage Return) in a dynpro entry field ?

    My problem is the following
    I have a card reader and the information of this card will go into a SAP dynpro entry field.
    Now I need an addition CR (Carriage Return)
    Is that possible ?
    Thanks

    Basically this card reader is nothing more than any other barcode scanning or otherwise, so here is what I'm thinking.  At my old company, we had a bunch of barcode scanners which connected directly with SAP, the user would scan the barcode and it would put the value directly in the dynpro field.  This was great, but the user had to then hit enter.  There was no way for us to control this on the ABAP side.  We then discovered that in the barcode reader itself, there is some configuration around what is called a "postamble".  This is a keystroke which is fired automatically when a barcode is scanned, or maybe when a card is swiped?  Check your terminal and see if their is such a setting or configuration.
    Regards,
    Rich Heilman

  • Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

    Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

    This is planned to be fixed in the next release.

  • Required entry field External Vendor number is Empty

    HI All,
    For my client scenario I need to use TRUST module Business partner Number (Role: General Business Partner) for our Fx-Real estate because When ever Employee join in company  General Business partner  will created and for TRUST requirement they are assigning customer role for BP and subsequently in FI vendor master will create for Employee.
    So as per client requirement I need to  use same Business partner  with role of Land lord with vendor account  and I will give link this Business partner to FI vendor master.
    But While assigning Landlord with vendor account role for that business partner system showing the error Required entry field External Vendor number is Empty.
    Solution is highly appreciated.
    Thanks in advance,
    CM

    Hi AP,
    Thanks for the reply and I tried to give Existing Vendor Number in Vendor General Data Tab and saved it but BP could not saved with Vendor Number and system not given any message also.
    Kindly help me
    Regards,
    CM

  • Date Entry Fields

    Hi,
    We are trying to improve the functionality of the Forte date entry
    fields. Currently you can set the template to allow either 2-digit or
    4-digit year entry. If you enter an invalid date Forte will display an
    error message telling you this when you tab off the field.
    Does anyone know if it is possible to disable this error message?
    What we want to do is have a date entry field that accepts 2 or 4 digit
    year. If you enter the date as 01/12/00 the system will assume you mean
    2000 and display 01/12/2000. If this is not what you meant you can
    re-enter the date as 01/12/1900. Is this possible with the Forte
    widgets?
    Regards,
    Jace.
    Jason de Cean
    Genisys Team
    Lumley Technology Limited
    Level 8, 55 Sussex St
    Sydney, Australia (+61)
    Ph. 02 9248 1321
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Jason,
    Yes this is possible. You need to create a CustomDateTimeData class(inherits
    from DateTimeNullable, DateTimeData, DateTimeDomain depending on your needs)
    which you override FillString and SetValue methods. Using template
    functionality is not flexible enough for your needs, so the FillString
    method will make sure that the Value of the CustomDateTimeData is always
    shown a standard way on Windows. The SetValue method will have the
    intelligence to decide on how to store the entered value depending on what
    the user enters and raise exceptions when needed.
    So when you use the CustomDataTimeData on your windows it will automatically
    call the FillString and SetValue methods when a value is changed or
    displayed.
    Read the online help on FillString & SetValue for further details or contact
    me if you have any more questions.
    Regards,
    Allister
    Sage IT Partners (Australia, Perth)
    -----Original Message-----
    From: [email protected]
    [<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of Jason de Cean
    Sent: Friday, 12 March 1999 10:08
    To: 'Shaughnessy, Kevin'
    Cc: 'Forte Users'
    Subject: RE: Date Entry Fields
    Hi,
    Yes, that is used to set the 'watermark' at which Forte will change
    between 1900 and 2000 years when 2-digits are entered.
    The problems is we currently have our widgets set to accept 4 digits.
    This means the user MUST type in 1-9-0-1 or 2-0-0-1. What I want it to
    do is allow the user to enter 0-1 and then display 2-0-0-1, and then
    overtype it with 1-9-0-1 if they wish, but instead you get the Forte
    error message if you only enter 2-digits.
    Do you know if this is possible?
    Jace.
    Jason de Cean
    Genisys Team
    Lumley Technology Limited
    Level 8, 55 Sussex St
    Sydney, Australia (+61)
    Ph. 02 9248 1321
    -----Original Message-----
    From: Shaughnessy, Kevin [SMTP:[email protected]]
    Sent: Friday, 12 March 1999 10:24
    To: 'Jason de Cean'
    Subject: RE: Date Entry Fields
    Jason
    There is an environment variable called FORTE_OLDEST_19YY which help
    you do
    what you want. It is documented in the System Management Guide for
    release 3
    on page 242. There is more information in the Framework manual also.
    Kevin
    -----Original Message-----
    From: Jason de Cean [<a href=
    "mailto:[email protected]">mailto:[email protected]</a>]
    Sent: Thursday, March 11, 1999 16:22
    To: 'Forte Users'
    Subject: Date Entry Fields
    Hi,
    We are trying to improve the functionality of the Forte date entry
    fields. Currently you can set the template to allow either 2-digit or
    4-digit year entry. If you enter an invalid date Forte will display an
    error message telling you this when you tab off the field.
    Does anyone know if it is possible to disable this error message?
    What we want to do is have a date entry field that accepts 2 or 4
    digit
    year. If you enter the date as 01/12/00 the system will assume you
    mean
    2000 and display 01/12/2000. If this is not what you meant you can
    re-enter the date as 01/12/1900. Is this possible with the Forte
    widgets?
    Regards,
    Jace.
    Jason de Cean
    Genisys Team
    Lumley Technology Limited
    Level 8, 55 Sussex St
    Sydney, Australia (+61)
    Ph. 02 9248 1321
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
    >
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

  • "Fill in all required entry fields"

    Hi,
    I am executing a program in background using a variant.
    But background job is getting cancelled with messge "Fill in all required entry fields"
    Can anyone help with the possible cause and solution for it.

    Hi Preet,
    I think may be you are missed the filling the mandatory fields..while creating your variant.
    for seeing those
    you can do one thing go to SM37 select your batch job and put JDBG (just JDBG not /nJDBG or /oJDBG) in the command line and hit enter..it goes to the debugging mode.
    so that you can replicate your job there.. and you find out by your own where that error message is coming.
    Thanks!

  • Text Entry Field All Caps?

    Is there a way to make the text entry field show all caps as an end user types?
    Thank you,
    cgoebel

    Hi Lilybiri,
    When you say "after submitting", what does that mean? I need the text to show as all caps as the end user is typing...and can then retain it if the lesson requires using the Retain Text property.
    And since this may be possible via JavaScript, anyone have the script to share?
    Thank you,
    cgoebel

  • Required entry field "Trip Activity Type" is empty

    In Travel management , when I create a travel request, Activity Type is a required field, I select a activity type when I try to save the travel request I get  this error.
    Required entry field "Trip Activity Type" is empty
    Message no. PTRA_WEB_INTERFACE078

    Hi,
    I think you have to maintain activity type for that year. check KP06 and KP26.
    Regards

Maybe you are looking for