Webhelp question re standalone use

Hi, I'm still using Robohelp X5. I have a question about
WebHelp Pro. My client needs the same Help system for both a
multi-user server version of their product and for their standalone
desktop product. Can I use the same Webhelp Pro compilation for
both? If I publish it to some disk location, can they then copy it
to where it needs to be for their server and also onto CD for their
desktop product?
Thanks for your help.

Well, actually, there is an issue with the WebHelp I tried
out. I gave my client the entire WebHelp folder to put on their
server. It works fine, except if you have opened the Help browser
window by clicking a context-sensitive Help button and then you
navigate to a new topic within Help and then go back to the server
app and click a context-sensitive Help button. The Help window
comes to the forefront but the page does not refresh with the
context-sensitive page - it stays on the one that you navigated to
through the TOC or by clicking a link within the Help system. If
you close the Help window and then click any context-sensitive Help
button, the correct topic comes up perfectly. The problem behavior
only happens if the Help window is already open and only if you
have navigated away (within the Help system) from the topic that
came up context-sensitively. I was wondering if that happens
because I did not "publish" my stuff but from what you are saying,
MergeThis, it doesn't sound like that would be the issue. Ideas?
Could it be the way the developer is calling the Help? (Other than
this issue, the WebHelp works fine.)

Similar Messages

  • Questions concerning the use of Adobe Interactive Forms

    Hi All,
    I have two questions that I would to see if I could get an answer to.
    1) Has or can one use an Adobe Interactive form on a Tablet PC to allow a user to draw, say a small diagram or map, and have that image then stored in an R/3 database?
    2) I may already know the answer to this, but want to verify it anyway. Can Adobe Interactive forms be used to provide data to other applications outside of SAP using NetWeavers J2EE or .Net API?
    Any help is greatly appreciated.
    Thank you,
    Mark

    Hello!
    1) As far as I know (and can see in Adobe Designer opened at my PC right now) there are no standard controls
    in the library that can be used to add drawing (ink) area to the form. Maybe external are available, but unlikely.
    Even more, googling shoes that Adobe itself is not eager to support ink in their Acrobat products... Pity but so.
    So my answer for the first question is "NO".
    2) That depends on what you mean on "providing data to other applications outside of SAP using NetWeaver J2EE and .NET".
    If you are using NetWeaver J2EE than you are still using SAP.
    If you want to install SAP's ADS server on J2EE server from another vendor, than it is not a good idea:
    First - it should be merely legal to use SAP software like this.
    Second - Adobe's standalone forms solution (Link: [Adobe LiveCycle Forms ES|http://www.adobe.com/products/livecycle/]) should be cheaper.
    On the other hand, if you create a simple form in LifeCycle Designer not inside SAP, but launched standalone and
    set this form to send data to let's say XML-service, than there is no problem to use any other server application / platform.
    It's just have to be a web-service like: support HTTP-requests with XML inside.
    In the last case still the question persists "why use SAP in this case?"
    Just few ERP 2005 licenses will cost more, than entire Adobe product line, so maybe you have to change the platform?

  • How to undo "This solved my question" on this Using iPhone forum?

    How to undo "This solved my question" on this "Using iPhone" forum?
    new to this forum... how do you undo this?

    **** lol, In that case they should give a warning or some type of "You sure?" yes/no. I clicked completely by mistake. anyways...

  • Question on MacPro Using VGA

    Hi. I have a MacPro1,1 and an older Sony LCD vga display that maxes out at 1280 x 1024. I just switched from a 5' vga cable to a 15' vga cable and have a marked decrease in picture quality.
    Here's my question: I'm using a pretty cheap 15' vga cable; in anyone's experience, would a better-quality cable improve the monitor picture image?
    Or, if I get a newer 1920 x 1200 monitor with DVI, would it look OK with 15' of cable?
    Thanks for any input.

    Switched to DVI cable, looks great at 15'.

  • Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often

    Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often cannot open files(or create a new one)..what am I supposed to do?! Really don't know what to do..I'll wait for your reply

    Amazon allows for at least so far when I have an issue like mentioned above a re-download.
    Yes it does.  So does the iTunes Store:
    Download past purchases from iTunes in the Cloud - Apple Support

  • I can't remember my security questions and have used the maximum number of tries, how do I find out what my answers are so I can log in and buy some music?

    I can't remember my security questions and have used the maximum number of tries, how do I find out what my answers are so I can log in and buy some music?

    From a Kappy  post
    The Best Alternatives for Security Questions and Rescue Mail
    1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    An alternative to using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • Question about standalone apps

    Hi enerybody, i am interested in developing standalone apps in the Java lang and would like toknow which IDE should i use SUN ONE STUDIO 5 SE, JAVABEANS or ECLIPSE 2.1
    I know that this has been asked a lot but please i really need to know because i am at a loss.
    Thanks in advance :)

    i think both questions ("which IDE to use?" and "which DB to use?") depend on your requirements!
    IDE:
    - are you only interested in a better editor which colors up your source code?
    - are you intereseted in a designer to create GUI's?
    - how much would you pay for a IDE?
    DB:
    - would you pay money for your DB?
    - how many sets of tables and data should the database manage?
    - how important is the speed of the DBMS?
    i myself am working with JBuilder 8 at that moment. the personal edition is free for download...
    as db i am using mySQL:
    a) i don't need an expensive high performance ... top DB
    b) my Homepage's hoster uses it so testing is easier
    c) ...
    what do you require?

  • CISCO AIRONET 1230AG Question for Standalone Mode

    Hello everyone,
    Just one fast question since i am trying to start a personal project.
    Can u use an aironet 1230AG AP as a purely standalone AP device
    like you would with any commercial AP?
    Also is there an administration page to do so or is it IOS oriented?
    Thanks in advance.

    Hi Karolos,
    you can of course use 1230 AP in standalone mode.
    It can be administered both CLI (IOS-like) and GUI (web page).
    configuration examples documents usually have both GUI and CLI.
    Here is a list of configuration example that might be useufl to you:
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_configuration_examples_list.html
    Note that if you have high number of APs then administration will be a headache if you are using them in standalone mode.
    If you have high number of APs then it will be much wise idea to use a controller-based APs.
    Good luck
    Amjad

  • A Case Study Question in the Use of Stills with Final Cut Pro

    Believe it or not, for the last week I have been reading endlessly about pixels, resolution, aspect ratio, Photoshop resizing, the bloody battle over the usefulness of the term "dpi" in video discussions, and generally about what one should do in order to use still images in a film edited in Final Cut Pro. And yet, though I have a PhD from an Ivy League university, and can understand a lot of things, I am sorry to say I am still at a loss.
    Much of the discussions of photos on forums like this one are either quite technical or broadly philosophical. But my questions are completely practical and specific. I am not a photographer or a printer, nor am I an experienced editor. I am just a fairly smart person trying to use photos in his film. So I am going to ask some specific questions and hope for specific answers, without any philosophical waffling or technical mumbo jumbo.
    I have one of those HP all in one printer/fax/scanner machines. I am told this device, while not fancy, is perfectly adequate to the task. Some of my photos I scan with this device from prints. Some of them I get from other people. (I have stopped downloading photos from the web, as the quality is nearly always poor.) I have Photoshop Essentials (not Photoshop). I am making a 90-minute HDV documentary, 16x9. The doc is mostly HDV footage with a still here and there. I want to be able to move on the photos (zoom, pan, etc.). I want, obviously, for them to look good. My sense is that the work flow is: (a) scan the photo (or obtain from some source as a digital file); alter the photo in some way in Photoshop; and (b) import the photo into your FCP project.
    Question #1: If I have a 6x8 print, what settings should I scan it in with -- is it possible there really is no difference between scanning in it at 72dpi and 300dpi? Is it really all about the dimensions of the image? Isn't a photo whose dimensions are enlarged in Photoshop to make it available for panning and zooming in my sequence going to look fuzzier and more pixelated if it was originally scanned at 72dpi than at 300dpi? Also: Does it matter if I save it as a jpeg or tiff? Bottom line: What settings do I use in my scanning software when I scan a photo for this purpose?
    Question #2: Once I have the image file on my hard drive, I suppose I now have to load it into Photoshop Elements and do something to it. What is it exactly I am using this program for? I'm going to take a wild guess. I use PS Elements to (1) crop the photo so that it has a 16x9 aspect ratio, and (2) resize it so that I can do pans and other Ken Burnsy moves on it in FCP. Bottom line: What exactly do I do in PSE to the photo and what settings do I use to both (a) make it available for moves and (b) not injure the quality of the photo by increasing its dimensions?
    (In passing, I will say that I have done experiments that show that if I increase a photo's dimensions to, say, 4000 pixels by 2000 pixels, the photo's quality definitely and obviously suffers. I don't understand how a picture can be increased in size without losing sharpness. So, what am I doing wrong? Is this a function of it having been scanned in improperly to begin with?)
    Question #3: If I am obtaining a photo from an outside source -- say, a professional photographer -- what are the specifications I ask for in both a hard print and a photo file? If the former, what dimensions do I ask for? If the latter, do I specify resolution and dimensions and file type?
    These are my questions. At this point, I really don't want to know WHY any of this is the way it is. I just want someone to say: "Do this; do this; and then do this."
    Thank you very much.

    Studio X is absolutely correct; while DPI has no meaning in the video world, it often has significant meaning in scanning (and, of course, printing). If your scanning program only allows image size adjustments in DPI, then you'll have to adapt to that ... keeping in mind that the scanner's DPI setting directly relates to pixel resolution. And it is pixel resolution (not DPI) that will make all the difference in the world for images used in video. You can test this yourself by scanning an image at 1000 x 1200 @ 72 DPI and again at 1000 x 1200 at 300 DPI. They will look identical on TV or projection as long as the pixel resolution remains the same.
    As an example, my Epson scanning software allows me to adjust image size by DPI or pixel resolution. Wanting to maintain the correct aspect ratio for the image area that I'm scanning, I adjust the DPI setting which in turn adjusts the pixel resolution automatically. But it doesn't work the other way around; if I adjust the pixel resolution settings manually, the DPI setting does not change. Your software may vary.
    As Jim Cookman suggested, a scan setting of 300 DPI works well for most images ranging from 3 x 5 to 4 x 6 (typical snapshot size) in a DV Sequence. I may scan smaller images at 400 or 600 DPI and larger images (8 x 10 and up) at 150 DPI. Other size images fall in between those numbers. But I'm constantly watching the pixel resolution numbers to make sure I'm getting what I'll need to support the animation I intend to apply to the images once in FCP. Also bear in mind that I don't always scan the entire image. I only scan the area of an image that I intend to use in my program.
    So the answer is that it all depends on your scanner's software and how far you plan to push into an image once in FCP. Do a few experiments ... you're a bright fellow so it shouldn't take long for you to find the formula that suits your purposes.
    I haven't edited an HD Sequence using images yet, so I cannot offer definitive pixel resolutions for you there.
    On to your specific questions:
    1. See above. There is no one correct answer It all depends on what you intend to do with the image once it's in FCP. If you only plan to push in about 10%, you won't need much higher resolution than the equivalent of your FCP Sequence resolution. If you plan to push in further, you'll need a higher resolution to support that move.
    2. I've been doing these for many years (SD Sequences only) and I've never loaded them into Photoshop first. I import the entire folder into FCP and drop it on the Timeline so I can see what the images look like on TV; unless your program is for CD-ROM or web delivery, that's where it counts. When you place them on the Timeline, FCP will automatically scale to your Sequence settings and pixel aspect ratio. If I see that some of them need adjustment using an external editor such as Photoshop, then and only then do I use that program. And by the way, if you have a vertical image and a 16 x 9 aspect ratio in FCP, how do you propose to crop it to fit? Perhaps you meant another term instead of "crop."
    3. If it's a print, it won't matter what size they supply because you'll control the image size when scanning. If it's a file ... once again, the size (pixel resolution) depends on what you intend to do with the image once in FCP.
    I really don't want to know WHY any of this is the way it is. I just want someone to say: "Do this; do this; and then do this."<<</div>
    With that attitude, how did you ever earn a PhD from an Ivy League university? But if that is truly all you want, you might consider hiring an experienced editor to do it for you.
    -DH

  • EJB question: How to use abstract class in writing a session bean?

    I had written an abstract class which implements the session bean as follow:
    public abstract class LoggingSessionBean implements SessionBean {
    protected SessionContext ctx;
    protected abstract Object editRecord(Object obj) throws Exception;
    public LoggingSessionBean()
    super();
    private final String getBeforeUpdateImage(Object obj) throws Exception {
    // implement the details of extracting the backup image ...
    public void setSessionContext(SessionContext ctx)
    this.ctx = ctx;
    private final void writeThisImageToDatabase(String aStr) {
    // connect to database to write the record ...
    public final Object update(final Object obj) {
    try {
    final String aStr = getBeforeUpdateImage(obj);
    writeThisImageToDatabase(aStr);
    editRecord(obj);
    } catch (Exception e) {
    ctx.setRollbackOnly();
    This abstract class is to write the backup image to the database so that other session beans extending it only need to implement the details in editRecord(Object Obj) and they do not need to take care of the operation of making the backup image.
    However, some several questions for me are:
    1. If I write a class ScheduleSessionBean extending the above abstract class and the according 2 interfaces ScheduleSession and ScheduleSessionHome for this session bean (void update(Object obj); defined in ScheduleSession), do I still need to write the interfaces for LoggingSession and LoggingSessionHome?
    2. If I wrote the interface LoggingSession extending EJBObject where it defined the abstract methods "void update(Object obj);" and "void setSessionContext(SessionContext ctx);", that this meant I needed to write the ScheduleSession to implement the Logging Session?
    3. I used OC4J 9.0.4. How can I define the ejb-jar.xml in this case?

    Hi Maggie,
    1. do I still need to write
    the interfaces for LoggingSession and
    LoggingSessionHome?"LoggingSessionBean" can't be a session bean, because it's an abstract class. Therefore there's no point in thinking about the 'home' and 'remote' interfaces.
    2. this
    meant I needed to write the ScheduleSession to
    implement the Logging Session?Again, not really a question worth considering, since "LoggingSessionBean" can't be an EJB.
    3. I used OC4J 9.0.4. How can I define the
    ejb-jar.xml in this case?Same as you define it for any version of OC4J and for any EJB container, for that matter, since the "ejb-jar.xml" file is defined by the EJB specification.
    Let me suggest that you create a "Logging" class as a regular java class, and give your "ScheduleSessionBean" a member that is an instance of the "Logging" class.
    Alternatively, the "ScheduleSessionBean" can extend the "Logging" class and implement the "SessionBean" interface.
    Good Luck,
    Avi.

  • Design Question: Can I use Rest-CsPoolRegisterState command in order start Front End Service when Quorum is lost and less than 85% of FES are available?

    Hi, 
    Assuming below setup for Enterprise edition Lync 2013
    Single Pool Stretched architecture with 4 FES servers
    Site A Data Center
    Site B Data Center
    FES
    2
    2
    SQL
    1 Primary
    1 Mirror
    Fact: In a situation when we lose network connectivity to Site A DC, and due to less than 50% FES servers, Quorum will be lost and as a result Front End Service will stop after 5 minutes. 
    The question is, would I be able to do a manual intervention by using this command
    Reset-CsPoolRegistrarState –PoolFqdn <pool name fqdn> –ResetType QuorumLossRecovery , and start FES with just 2 FES servers in Site B DC and 1 SQL
    Server?
    The reason I am asking this question is because it is mentioned in one of the Lync manuals that at least 85% of the servers must be available to recover once the Quorum has lost. The same manual also mentions to use above
    mentioned command in order to recover from Quorum Loss despite the fact that the lost FES servers are still not available.
    Thanks in Advance

    Hi,
    In Lync server 2013 Stretched pools are not supported for the Front End, Edge, Mediation, and Director server roles. It need two Lync pools.
    If one pool fail to connect, An administrator can declare an emergency and fail over the pool to the backup pool.  That is done by using the:
    Invoke-CsPoolFailover –PoolFQDN <Pool fqdn> –DisasterMode –Verbose
    More details:
    http://blog.avtex.com/2012/07/26/understanding-lync-2013-server-failover/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How to read the TEXT TABLE (or) .CSV in HSQLDB Standalone using Java

    Hi, I like to use the text tables in our application. And like to use the HSQL Database Engine as Standalone. I created the text tables, those are stored in the disk as ".CSV" files. But i am unable to read that text table (.CSV) when i relogin and gave the CSV file path as URL along with "jdbc:hsqldb:file". So can anybody give me the tips how use the text tables.
    Regards,
    Vinay

    You need to make a URLConnection to the page you want, and get the input stream from that page.
    The contents of the input stream (use a reader to get them) will give you the raw HTML code. Use a parser to get the actual content. I dont know of a parser offhand, but you can search for one.

  • Quick Question: Will TC Use an External Drive Like the Internal?

    I use an AEBS with the "unsupported disks" hack to mount a Drobo disk over AFP. I back up regularly over 802.11n (Apple Version), and it has been working very well since December. There's no question that it works. I have done a couple of restores, and regularly browse to ensure backup integrity. I do offsite backups of important/secure stuff, but that's not a Time Machine regimen. It's much more a classic "dump n' burn" type of thing.
    If no one is familiar with a Drobo, it's a pretty nice piece of kit. It's a "slobo," so you want to use it over a network, but it is robust as ****. A LOT cheaper than RAID 5 (I set up about 1.7TB of redundant storage for about $700).
    What I get tired of are extremely long "Preparing" and "Finishing" sessions in my backups. The backups are not considered done unless all three phases have completed ("Preparing", "Backing Up", "Finishing"). In many cases, the "Preparing" phase is a lot longer than the "Backing Up" phase. I'm pretty sure that this is because Time Machine is sorting out the prior backups on the disk. It probably does this in a fairly primitive manner across the mounted file system.
    I am assuming that Time Capsule has a client/server architecture, where the TC unit does a lot of the "sorting out" in the unit itself, as opposed to making the computer do it. What concerns me is that it does this only for the internal disk, and external disks are treated in exactly the same manner as they are currently treated by the AEBS. I have asked several people at Apple (including so-called "geniuses") about this, and have received blank stares, so the prognosis isn't good.
    Unless Apple can convince me that the TC will offer a significant improvement over my current system, I see no reason to get one. This isn't aimed at people like me. It is aimed at home users who have never had a backup in the first place. I don't think they lose any sleep over the thought that I won't buy a TC for my setup.

    You said "In order for TC to be attractive to home users, they must be offloading a lot of the administrative work to the unit." If this was a question... The answer is that there is no real "server" intelligence built into the Time Capsule. All the "administrative work" for Time Machine is done on the Mac running Time Machine.
    As a side note - Apple employees will very, very rarely enter discussions in these forums.

  • How to Upload Multiple questions IN LSO using Authorizing tool

    Hi Friends,
    I am very new to the E-learning. As per my knowledge after uploading any content through Authorizing tool in will be uploaded to KM folder.
    In my practice I am trying to upload the Multiple questions. I have searched but I am not find So please guide me the below scenario.
    We have a requirement that is User need to complete the assesment. In this assesment we have 100 questions with random option. How to upload these 100 question at a time using authorizing tool.
    Thanks,
    Suresh

    Hi Sandesh,
    this is simply not supported, not in WebDynpro nor in standard HTML.
    A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
    I hope it will  help u..
    ----------------------OR-------------------------
    As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
    http://scn.sap.com/docs/DOC-2270
    ----------------------OR-------------------------
    You can use Table UI element.
    Regards,
    Deepak Singh

  • Questions how to use it

    Hello all,
    after a long journey through the various documents about SAP Mobile Documents I thought this would be the fastest way to get answers to my questions:
    1. How can I aa members to my folders from the IOS apps (iPhone, iPad)?
    2. How can I make a folder from my documents to a folder I can share?
    thanks upfront to everyone who helps me to answer these question.
    Regards
    carsten

    Hi,
    Till SP3,
    - From Mobile Apps for SAP Mobile Documents, you can't edit shares (incl. adding members, creating public link for existing shares etc.). You have to do this from Web interface. The Web Interface is mobile ready and you can use it to edit the shares from your mobile.
    - Sharing folders is not supported so far.
    We will be developing these in next service pack - SP4.
    Regards, Ashwani Kr Sharma

Maybe you are looking for