Webhelp Settings correctly show Output Folder & Start Page, but pubishes a different Start Page.
Why, and where else can I look to fix this?
When I publish a file, it incorrectly opens like this:
It opens to Charge Entry topic within Charge entry book.
I would like it to open like this:
Showing the Workqueue Help Overview page.
The Properties for the WebHelp (Primary Layout has the Output Folder and Start Page as C:\\Charge Entry - Workqueue\!SSL!\WebHelp\charge_entry_-_workqueue_help_overview.htm
That is the correct page to show the file I want to show.
Do you have any suggestion as to where I can go to change it?
Thanks for any help and/or insight you can give.
I'm a relatively new RoboHelp user.
Vicki
You are not understanding the difference between a start page and a default topic.
The start page is what opens the tripane window. Typically you call it index.htm. Elsewhere in the configuration of your output there is a field to set the default topic. That is the topic that will appear in the topic pane. Select the topic you mentioned and then the help will open as you wish.
Please see the Sticky Topic "Before You Post" and start new threads with the version and edition of RoboHelp that you are using. Had you done so, I could have included a screenshot to help you.
Post back if still not clear.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
SEO Properties settings not showing in Term Driven Pages tab in Term Store
Hi,
Many people have documented the ability of setting up SEO properties to a term in the term store in SharePoint 2013, but I was not able to find a place to do that.
Can anybody help me on figuring out how to set SEO properties for a given term via the term store UI ?
I read somewhere that this can be achieved by setting the properties in the Term - Driven pages tab of a term but can't seems to have such option available.
Thanks and Best Regards,Hi Supun,
I have seen a similar post from you. You can take a look at the following thread:
http://social.technet.microsoft.com/Forums/en-US/d3900557-a3ed-422d-9340-a213be8b539f/seo-properties-settings-not-showing-in-term-driven-pages-tab-in-term-store?forum=sharepointsearch
I would suggest you to open only single thread for single issue. You can discuss your problem in this thread only.
Thank you for your understanding and support.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Set up for HP Designjet 500ps using Mac os x 10.4.11 Does any one know where to upload
Leopard os x 10.5 The printer will not print until I have the updated software. Ebay sell the
disc on their auction site, but only on disc not a download which is more convenient & faster
to get in a hurry.The software installed in the mac is working the way it should & showing up
as it would but it seems as though there is a driver that's needed. The results in any articals
that I have read suggest you don't need any drivers if you use HP EasyPhotoSoftware installed.Welcome to Apple Support Communities. We're users here, not "Apple Inc."
You might have better a response to your questions by posting them in the OS X 10.4 Tiger forums: https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger
or in the PowerMac forums:
https://discussions.apple.com/community/desktop_computers/power_macof
This forum is for OS X 10.6 Snow Leopard. Since that version won't run on your PowerMac, you're not likely to get many helpful responses here.
In any case, I'll try to offer some basic troubleshooting suggestions:
The PS designation on your printer denotes the PostScript printer language. Is your applications software and current printer driver configured to send PostScript (or HP-GL or HP-PCL or ???)
Does ANY application print anything (even gibberish) to the printer?
HP still shows a DesignJet 500 series raster driver for OS X 10.4 Tiger available to download here:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/? sp4ts.oid=377952&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Di dx%253D%257CswItem%253Dpl_97046_1%257CswEnvOID%253D2072%257CitemLocale%253D%257C swLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTo k=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Does the printer time-out with every program, or just one? Have you tried another cable?
OS X 10.5 Leopard is no longer sold by Apple. It was never sold as a download, sold only on CD/DVD disc. Discs might still be available for purchase on eBay.
OS X 10.6 "Snow Leopard" is the oldest version of OS X still sold by Apple, and it too is available ONLY on CD/DVD for $20, but it will not run on your PowerMac, because Snow Leopard requires an Intel processor: os x snow leopard requirements
HP DesignJet 500 basic printer documentation is available as a pdf document and downloadable file here: http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults?sp4ts.oid=2 5301&ac.admitted=1391720518005.876444892.199480143
How is the printer connected to the computer? Are you using a USB interface, a Centronics 'Parallel' interface, or a JetDirect network interface?
It appears that the network timeout default for the printer was 30 minutes, but it can apparently be set in the range of anything 30-seconds and longer. The manual notes that some software does not send an 'end of job' postscript marker, so that is the reason for the time-out setting.
http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docD isplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=do cDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDoc Display=wsrp-resourceState%3DdocId%253Demr_na-c00749274-1%257CdocLocale%253Den_U S&javax.portlet.endCacheTok=com.vignette.cachetoken -
On my ipad2 why is my wife's apple I'd showing up in the apps. I confirmed my I'd in settings but I can't get rid of her apple I'd. Any suggestions
Welcome to the Apple Community.
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID) -
I am having a problem opening the safari on the ipad. In the settings it tells me that I am connected to the internet but when I open the safari, it tells me that I am not connected. any ideas ?... thanks
Start with a reboot of your router and power the iPad off and on. Then look here for more help.
http://support.apple.com/kb/TS1398 -
Tabs from previous session don't reload on Yosemite, all settings correct
I have all settings correct and everytime I start firefox it goes to homepage. Using Yosemite
Is there a sessionstore.js file created in the Firefox profile folder?
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
You can check for problems with the sessionstore.js file in the Firefox profile folder that store session data.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
You may also have to move the files in the sessionstore-backup folder to a safe location. -
Are all the *.wsdl files in "output" folder necessary?
When I generate a BPEL process from JDeveloper then the output folder contains sometimes (but not always)
many *.wsdl files. Are these *.wsdl files necessary (for the subsequent deploy process)
or can I prevent the generation of them into output folder?
PeterI dont think they are required for deployment.
Regards
PavanKumar.M -
I cannot sync iMessage between devices although I have both devices settings correct
I have the settings correct on both iPhone and iPad but messages still will not sync. They had been working and then it stops. Anyone else having this problem? A possible solution?!
ran a second RESTORE, this time after doing a RESET ALL settings... it worked
-
Output folder URL not sticking
In the Flex Build Path setting for my Flex project, I set the
Output folder and Output folder URL. It appears that the Output
folder URL is not getting saved when I shut down and reopen Flex
Builder. The Output folder is sticking, but I need to respecify the
Output folder URL each time I fire up Flex Builder.The attribute name in .actionScriptProperties is "rootURL",
but I just tried
manually inserting it there, and unfortunately, it looks like
beta 3 ignores it.
- Mike Morearty
Developer, Flex Builder team
http://www.morearty.com/blog
mgbaron wrote:
> I'm getting stuck on this issue as well.
>
> In the meantime, is there a parameter I can add to my
.actionscriptProperties file that will make the output folder when
I close FlexBuilder? -
Webhelp Output Folder Structure
This is more of a question than an issue.
When I generate webhelp from a FrameMaker-integrated RoboHelp
project, RoboHelp always adds a folder to the output to match the
name of the FrameMaker book in the Project Manager/Project Files
folder.
Example:
My FM book is called apiusersguide.book. After bringing the
content into RoboHelp, the parent folder (to match the book name)
is apiusersguide. When I generate the webhelp, I want the output to
be in a folder structure that looks like this:
apiguide\
apiguide.htm (webhelp startup file)
chapter1\topics.htm
chapter2\topics.htm
and so on. The output I want is apiguide\chapter\topic.htm.
However, RH ALWAYS adds the book name to the top level, even
if I omit it in the Webhelp Output Folder field when I generate. So
the folder structure ends up looking like this:
apiusersguide\ (name of the FM book and top level RH folder)
apiguide.htm (webhelp startup file)
apiguide\
chapter1\topics.htm
chapter2\topics.htm
and so on. The output I GET is
apiusersguide\apiguide\chapter\topic.htm.
I've experimented with a variety of different FM book names
and output folder names and RH ALWAYS inserts that top level folder
automatically. Is there any way to NOT generate the extra top level
folder in the output?I am sorry Michael, I am unable to understand the exact
problem. Have you created the TOC using the Auto-create TOC option?
That could be the only reason for it to display the same names of
book in the output. Have you tried to name the books and the topics
as you have specified in the TOC? If not, do that first and I am
sure you can get the desired results.
Again, as I mentioned, if I have not understood you
correctly, please let me know the real issue and I'll try
resolvingit for you.
Regards,
Pooja -
Smart folder can't show recent folder correctly
Hi all,
I would like to quickly view/select the recently opened folders in finder but I can't really find any efficient ways to do it.
Finder->Go->Recent folders does show what I need, but limited to 10, and it's not convenient to click.
I tried to setup smart folder with "show folder only" and use raw query "kMDItemLastUsedDate >= $time.today(-2)". I suppose this should be simple but it didn't work well.
My finder shows files in column view, and Finder->Go->Recent folders always reflect what it should be, but the smart folder method just won't give me the folder I navigated, but sometimes show up folder I didn't actually opened (perhaps by other program, but these won't appear in Finder->Go->Recent folders).
Any one has ideas on this?
I will be very grateful if anyone can help.
Jake
PS: Default folder X is good, but I don't usually work in the open-save dialog style when working with files. Also finder shows the recent folders by alphabetical order but not ordering by time, which is kind of annoying..hinagate,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing from the port? The output sound settings are showing as digital optical only? I used the headphones in the laptop for the first time yesterday and have had this problem ever since. Any ideas
The internal switch in the audio output port is stuck. Try inserting the earphone plug a few times. If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
Ciao. -
Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.
JimHess~ Many thanks. In my short history with LR, it's amazing how many people I've seen ask this question. I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question. You made my week. And my friend's photo album...
-
MSI P67A-C45 OC settings not showing correctly in windows.
I have a MSI P67A-C45 and been playing about with overclocking. When I overclock it all shows fine in the bios but when I boot into windows, it does not show everything correctly.
I have used CPU-Z, CPUID HWMonitor and the most uptodate msi controlcenter 2. It seems to show the voltages almost correct but the CPU frequency is not the same. See the 2 pictures. One with my bios settings and another of the programs I used in windows.
If I use OC genie is show up all correct, just not if I do it manually. Turned off EIST and most power saving but still the same.
Just another thing, the bios is a bit buggy to. The mouse seems to have a fit and select when I don't want it to or the wrong option. This is while I scroll down on the menu.
My bios with OC settings
In windows. Not showing correctly.Quote from: coremaster on 21-January-11, 07:19:08
I have a MSI P67A-C45 and been playing about with overclocking. When I overclock it all shows fine in the bios but when I boot into windows, it does not show everything correctly.
I have used CPU-Z, CPUID HWMonitor and the most uptodate msi controlcenter 2. It seems to show the voltages almost correct but the CPU frequency is not the same. See the 2 pictures. One with my bios settings and another of the programs I used in windows.
If I use OC genie is show up all correct, just not if I do it manually. Turned off EIST and most power saving but still the same.
Just another thing, the bios is a bit buggy to. The mouse seems to have a fit and select when I don't want it to or the wrong option. This is while I scroll down on the menu.
My bios with OC settings
In windows. Not showing correctly.
I'm having the same issue here, bios 1.5
With EIST disabled, I can get into windows at 4.5GHZ on a i5 2500K
With it enabled, I cant get anywhere beyond 4ghz
I'm going to run some tests now to check, but with EIST disabled, doesn't matter the clock I set on bios, the clock on window will show up always as the default clock speed -
The ringer only makes noise when the earpiece is in. The settings are showing as correct
The ringer only makes noise when the earpiece is in. The settings are showing as on for both ringer and messages.
The internal switch in the audio output port is stuck. Try inserting the earphone plug a few times. If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
Ciao.
Maybe you are looking for
-
Ever since I installed iPhoto '11 on my computer, I have had a problem with images being duplicated when I want to open an image to edit in Photoshop. I did not realize at first that the images were also duplicated on my computer. This has taken up
-
Purging FM files of conditional expressions
As you've probably all seen, Framemaker 8 caches every (or at least the most recent few) conditional expression you create for a book. These expressions populate a dropdown list in the show/hide conditionals dialog box and just generally take up spac
-
Runtime error R6304 Lightroom 5.3
Hi, I am getting a Microsoft Visual C++ Runtime Library error when I import photos into Lightroom 5. It is not allowing a clear thumbnail of the my photos Can anyone help with this issue Thanks Dave
-
Please Help!!! Getting data to a table
I am having real problems with this I want a table with a header which lists the contents of a file. In this file on each line there are the header titles eg each line is set out the same just containing different parameters etc Event No: 0 Time
-
Flash movie won't play in PowerPoint
I have created a flash movie, however, when I try to view the slideshow, all I see is a blank page. I have installed the most updated Active Controls and the Shockwave Player, but it still won't play.