Webi 4.0 and BW Hierarchy Key display

We have recently installed Business Objects 4.0.2 and have some questions about Webi 4.0 and reports based on SAP BW via BICS connection.
1. Is there a way to display the key of hierarchy in WEBI 4.0. Currently I only see the text for Cost centres.
Is there a settting that we need to change to control the display Key/Text.
2. Also Can we control the hierarchy level that we want to display.
Currently I do not see any control, It just displays the entire hierarchy.
What if my users do not want my users to see the details of the lower nodes of hierarchy.

Suman Kollipara wrote:
Thanks very much Henry. But I am not seeing anything when I go to "Member Selector". My list is empty and I cannot see any members or leaves. That is infact my root issue here. But when I execute the report, I see the data in hierarchy on the report output. But it is weird that i cannot see anything in the "Member Selector" window. Any ideas please??
>
> Thanks again
> Suman
Hi Suman,
I also ran into this problem and as a workaround found that if you refresh on the Data Preview to return some records and then click on the "Member Selector" you will find the hierarchy and be able to select the level only or with children/descendants.
Hope this helps.
Regards,
Willemien

Similar Messages

Webi 4.0 and BW Hierarchy Member Selector

Hello,
We have recently installed Business Objects 4.0.2 and have some questions about Webi 4.0 and reports based on SAP BW via BICS.
1. We have setup a BICS connection to a SAP BW query using the Information Design Tool and attempted to create a report on this connection.
2. In the query report panel, we select a Cost Center hierarchy object, cost element hierarchy object and a key figure. Next we click on the drop down arrow next to the hierarchy objects to see the members.
Unfortunately we do not see any members. It says "No Values to Display". If we search for the object via the text search, we can find objects that are selectable. Also if we click "Select All', "All Members from [hierarchy] are selected.
3. When we go to run the query and the parameters window appears, we can see the hierarchy fully exposed in the parameter pick list. The report will run successfully and returns data.
Is this normal functionality where the member selector is empty?
We have run a security trace to see if we needed any extra rfc's or authorizations, and everything has appeared to pass.
Another test was completed where the entitlement user was also given All access to test, and it had no effect.
The user has been added to the administrator's group in Business Objects for full access as well.
Any help would be great!
Regards,
Nick
Edited by: Nicholas Chu on Oct 14, 2011 8:13 PM

Hi Nicholas,
We are having exactly the same issue. I do not think this is a normal behavior, because I have seen in the web many videos where the hierarchy is displayed completely.
Sorry that I cannot help any further, I am interested in your findings too.
Kind regards,
Leticia

What's wrong with the built-in keyboard on my macbook? The caps button does not work rite, no matter what letter button i push they all come out capitals and the number keys when pushed display the special characters instead of the numbers!

the built-in keyboard on my macbook is not functioning right, the number keys when pushed display the special characters instead of the numbers,
the caps button doesn't work at all, the letter buttons display capitals when pushed whether the caps button is on or off, the shift keys are also out of whack!!
It seems it somehow got relocated to the "0" button because if you push and hold the zero button down the keyboard seems to operate normally, the number keys display numbers when pushed the letter keys display lower case when pushed but release the zero button and your back in the twilight zone!! Can anybody help me resolve this issue? one more thing im using an external usb keyboard right now and it seems to function properly if that helps any.

You would do better in the actual macbook pro forums (this is not).

Does Safari support a interactive PDF with hidden layers? I'm on version 5.0.3 and the interactive PDF displays just fine, but our web development team tells me all the layers display when they view the same PDF on Safari.

Does Safari support interactive PDFs with layers? Through the use of hidden layers and buttons we built in interactivity that allows the viewers to click on buttons to display different content. When I view the PDF in Safari 5.0.3 on my Mac OS 10.5.8 the PDF displays fine and the interactivity works. However our web design firm tell me the PDF displays all the hidden layers when they view it in Safari. Who's right?

Try updating your Safari to the latest version, 5.0.5.
Also check whether the rest of your system is up to date by going to Software Update in the Apple menu.

Em and isqlplus do not display web pages

Hi friends,
I have installed now ora10g R2 on windows2003 and it
was done successfully with all the services up and
running. But web-based OEM and isqlplus wont run.
http://HPG4:5561/isqlplus and http://HPG4:1158/em display blank pages.
Can u help me pls....thanks :)
Message was edited by:
[email protected]

Thanks again everyone...
Im testing the url at the local server and im using I.E 5.0.
For oem i checked that the OracleDBconsoleORCL service is started
i guess this is the same as starting emctl at command line.
The server name is HPG4. when i run the url at the local server
http://HPG4:1158/em will display blank while...
http://localhost:1158/em is ok
and when i run http://HPG4:1158/em at another client pc the result is also ok.
For isqlplus i checked that the OracleOraDb10g_home1iSQL*Plus service is
started and i think this is the same with starting the isqlplusctl at command line.
for isqlplus the default port is 5561.
When i run isqlplus both at the client and local server gives the same
error (PAGE CAN NOT BE DISPLAYED) is shown. There must be error in the
configuration of isqlplus i guess :(

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Is it possible to add and view your key words when creating a web site from Lightroom 4?

Is it possible to add and view your key words when creating a web site from Lightroom 4?

Hi,
I had the same problem with
"java.lang.NullPointerException at com.sap.tc.webdynpro.clientimpl.html.uielib.standard.uradapter.ViewContainerUIElementAdapter.getContent(ViewContainerUIElementAdapter.java:98)"
when I included ViewUsages dynamically in an action handler (outside wdDoInit()).
The code below fixed that problem.
This code creates a new OutboundPlug for the embedding view with the embedded view as target and fires the plug.
// Create OutboundPlug
IWDOutboundPlugInfo outboundPlug = embedderViewInfo.createOutboundPlug();
//Create navigation link
rootViewUsage.createNavigationTarget(outboundPlug.getName(), interfaceViewUsage, "Default");
// fire navigation link
wdThis.wdGetAPI().firePlug(outboundPlug, Collections.EMPTY_MAP);

I hope I could help you. Probably you don't need the information anymore, but perhaps anybody else has the same problem.
Regards, Alex

Imac displays a black screen stating "No bootable device --insert boot disk and press any key", imac displays a black screen stating "No bootable device --insert boot disk and press any key"

I've had boot camp run a setup on my macbook pro, I have a disk from Dell that states "for reinstalling Dell Inspiron and XPS system software". I would not read the disk as I am still looking at the black screen that portrays the Above statement of "No bootable device --insert boot disk and press any key"
my keyboard is inoperable at this point until I could do anything further with the above directions. This was my first time using a Mac and Boot Camp was a setup that I thought would help me become more well aquainted due to my history with windows. Could anyone be of assistance w/ my situation?

... I have a disk from Dell that states "for reinstalling Dell Inspiron and XPS system software".
It sounds as if that disk is specifically meant to install the Dell's operating system for that specific computer. It is not a generic Windows installation disk. Microsoft has strict licensing requirements for Windows and I would be surprised if the Dell disk would be useful for anything other than the computer with which it was included.
You need to buy a copy of Windows that is not machine-specific.
I recommend you forget Windows unless you have a pressing need to use it. I can't think of any.

I am able to search only by text and not by Key in filter.

We have a variable x which has bex properties in the infoobject level to
1.display: Key and Text
2.text type: long text
3.Query def filter value selection: Only values in infoprovider
4.Query Exe filter value selection: Only posted values for navigation.
in the Query designer to the object we have the same properties for 1 and 2 as above.
 On execueting the report in web, In the variable screen for x we can search for both Key and text. (we have two radio buttons for Key and text),
 Whereas in the result area for the filter for x I am able to search only by text and not by Key. I want to search by both Key and text in filter screen.
Can u suggest suitable solution for this ASAP.

I have been working on a similar problem and have found that it depends on what kind of InfoProvider you are using.
If you are using an InfoCube, the setting that seems to control this is on the maintenance screen (Admin Workbench -> {InfoProvider to be edited} -> Change -> Extras -> Structur-Specific InfoObject Properties. If you want the key and text to display on the variables screen (which you already have), make sure the 'Display' is set to "Key and Text". If you want key and text to display on the filter screen, make sure the 'F4 Query' is set to "Values in Master Data Table". (You may also have to set the characteristic to display key and text in the query, but it sounds like you already have done this.)
For an ODS, the settings are the same, but the path to get there is different. Go to Admin Workbench -> {ODS to be edited} -> Change -> {InfoObject to be edited} -> Right-click -> ODS-object Specific Properties. Same settings as above after this.
For a MultiProvider, I found that the settings on the InfoObject itself seemed to control the display on the Web, so I ended up setting: Display = "Key and Text"; Query Def Filter Value Selection = "Values in Master Data Table"; and Query Exe Filter Value Selection = "Values in Master Data Table". That may be a bit of overkill, but I wanted to be sure to get both key and text in all situations.
I also found that the settings for navigational attributes (e.g., 0PLANT__0REGION) for any kind of InfoProvider must be set at the InfoObject level (e.g., 0REGION), as above.
Even with all of this, I still have a couple of InfoObjects left that I can't get to display both key and text for some unknown reason.
Hope this helps...
Bob

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size for all my program. Is there a single setting that I can change?

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size of my display for all my programs. Is there a single setting that I can change as a default setting?

You can drop the resolution a little, but it makes everything blurry.
OS X isn't as friendly like Windows is to give some UI adjustment, one of many major complaints about the platform that has gone unheeded for years now.
As a lifelong Mac user who's eyes are going due to age, I'm really liking Windows 7 more and more every day.
If you use Firefox, NoSquint and Theme Font & Size Changer add-ons, with a nice persona that makes better contrast, tweak the FF toolbars, you can at least make your web surfing tolerable on Mac's.
Also you can set a Control key in System Preferences > Universal Access plus a scroll wheel mouse, if you need to zoom in/out certain areas of OS X, however for a pernament UI scale solution there is none that's practical, unless you have a large room, a projector and a smooth wall.
A larger monitor won't work up close neither, however dropping the resolution and sitting back a bit might sharpen the images a bit.
The UI really needs to be adjustable and it's not.

Hierarchial Table Display

Hi all.
A user has requested a hierarchial table display, consisting of header rows and detail rows, both with multiple but different columns.
Something like the old FM REUSE_ALV_HIERSEQ_LIST_DISPLAY.
For example:
Purch. Order   Vendor   Name
   Item   Description        Material    Quantity   UoM
3800000001     123456   Widgets R Us
   20     Blue Widget        WID001            2    EA
   20     Red Widget         WID002            5    EA
   30     Green Widget       WID003            4    EA
3800000002     654321   Widget Warehouse
   20     Blue Widget        WID001            3    EA
I have had a look at Table with Tree (DEMO_TABLE_WITH_TREE), but from what I can see this UI only allows a single column for the hierarchy structure.
Does anyone know how to achieve a multi-column hierarchial display in a table ? Any suggestions or comments appreciated.
Thanks & regards,
Grogan

Hi,
Refer this article: [ALV and Standard Table as Hierarchy in Web Dynpro ABAP|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c060fcb4-2c62-2b10-d2b2-f32407a5cc6f].
I hope it helps.
Regards
Arjun

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Bootcamp Win 7 No bootable device -- Insert boot disk and press any key.

Hello everybody, I bought a windows 7 to install with bootcamp in my MBP retina, it came buy post, a windows 7 ultimate, OEM, and for my surprise it came with a DELL computer reinstallation CD, well, I search the Internet and some guys were receiving the same CD, and the web sites were saying that it works perfectly. So, I started to install it with boot camp.
I format my USB 16 gig from scandisk for (DOS FAT) in utility's on my mac, and I went to BOOT CAMP to install the windows. As I have a superdrive and the CD from win 7, I didnt select the option of creating a image of windows 7 (the first option) and I just select the other two. So the bootcamp asked me to connect my USB stick for downloading the windows drivers, and after downloading he opened the partition screen, I choose 30 gig for my windows partition and pressed continue, after that the boot camp asked me if I have a windows installing cd, and I clicked yes, Next window, " If you have an installation CD the boot camp will delete the boot from your USB stick, press continue, and I did. After that my mac reboot, and now I have the message " No bootable device -- Insert boot disk and press any key"
It doesnt boot with the USB stick.
It doesnt boot with my cd
ALT CMD doesnt work.
No MAC no Windows? Sheeee
Please help me if you can.
I have done a backup before.

You should take your Boot Camp discussion to the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp, where the "no bootable device" issue has been asked and answered many times.

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button. Worked fine before Lion update. Any Advice?

Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine.
Had heard something about this happening w/ Lion but went ahead anyway.
Oh well...
Hoping your pointer helps... will let you know how it turns out. Thanks very much for responding!!!

Webi 4.0 and BW Hierarchy Key display

Similar Messages

Maybe you are looking for