WebI Design Mode disabled when accessed from BI Launchpad Applications

I am running BI 4.1 and everything seems to be enabled when I log in to BI launchpad using administrator credentials but when I log in as a super user user, by default, Design mode and some of the other options are disabled. I have tried almost everything but am not able to figure this out. I need the super user account to be able to design reports in WebI, and save and distribute them.
-Rohit

Hi Rohit,
Please follow below mentioned steps :
1. In CMC go to Application
2. Right Click on Webi Rich Client -> Select User Security.
3. In user security give full control for user/user group.
If you would like to give more Edit Rights to users please follow above mentioned steps for Connection and Universe in CMC.
For Connection and Universe you can go to Manage -> Top Level Security to grant permissions.
Hope this will help..!!!
Regards,
Veer S.

Similar Messages

HT1491 Search option tab doesn't appear on my iTunes Store when accessed from iPad or iphone

iTunes Store has recently been launched in India ....however search option tab seems to be missing in the app when accessed from iPad or iPhone. Also the purchase option is visible in iPad but missing in iPhone

Me too. 34000+ items.
Gotta wonder if that's a factor.
Just now I removed all remotes from iTunes.
(Prefs > Devices > Forget All Remotes)
Then I turned on Home Sharing on my iPhone.
(Tap the gear icon in the Library selection screen.)
Previously the iPhone was registered as a regular remote.
So both devices are controlling iTunes via home sharing.
Now iTunes is not crashing at all, in full-screen mode or otherwise.
Not sure if it will last, but time will tell.
Hope this is useful to you.
I'll post back if the crashes return.

Why can I not adjust the volume on a video when accessed from the lock screen

Why can I not adjust the volume of a video in my pictures folder, when accessed from the new lock screen option?

There is no way to access videos directly from the lock screen.
What exactly is being attempted here?

I've lost iWeb and thus my web design. I must start from scratch. Should I reinstall iWeb 09 and use that, or is there a better way?

I've lost iWeb and thus my web design. I must start from scratch. Should I reinstall iWeb 09 and use that, or is there a better way?

The file you really need is named Domain.sites2 which resides in your Home/Library/Application Support/iWeb foldler. It's independent from the iWeb application. If it's not in there do you have a backup of your hard drive from an earlier time?
Resinatll iWeb 3 from the iLife 09 disk or wherever you got it from originally and then try what's described below:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Font size of address list when accessed from a new message...

Ok, here's the issue, a friend of mine has trouble reading the rather small display size of the address list when accessed from within mail (the small quick box that appears). I can't seem to find how to make it larger anywhere. There is a setting from within Address Book, but this changes the display size just for when you access it directly, and not from within mail. Any ideas peeps?
Ta xx

the only changes you can make with regards to viewing/selecting font size and style are in mail>preferences>fonts & colors.
hope this helps

Why cant I send emails, or open folders, from my Outlook email when using ipad. My Outlook is functioning normally when accessed from laptop.

Why am I unable to send emails or open folders from my Outlook email when using my iPad? My Outlook is functioning normally when accessed from my laptop. This problem has been going on for three days now - everything was functioning normally before. I have looked at the standard troubleshooting suggestions provided by Apple, but they do not appear to cover this eventuality. I should be most grateful for any help.

Try first to Clear your cache from : Tools > Options > Advanced > Network, Clear Now button.
if the above is not helpful, [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles create a new profile] and check it again.
if you create the new profile see: [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#w_recovering-information-from-an-old-profile Recovering information from an old profile]
thank you

XP Mode Crashes When Accessing Network Shares

I am using Windows 7 Professional and have installed XP Mode to use a legacy accounting application.
In the Virtual Machines folder on the host under settings I have set the network adapter to Realtek PCIe GBE Family Controller.
Under XP Mode, I have set XP to be a member of the workgroup and I am logging on with a user who can access network. When I run XP Mode I can access the internet with Internet Explorer.
If I then go to "My Network Places" "View Workgroup Computers" I can see all the workgroup computers on the network. If I then double click on a computer name Windows Explorer shows me all the shared directories on that computer.
This is where the problem occurs. If I then click on a shared directory XP Mode instantly exits and restarts. (Windows 7 is unaffected.)
Does anyone have any idea's as how I can access all the shared directories to view the files stored on the network.

Miya Yao, Thank you for your reply.
Can other computer in the workgroup see the shared directory in Windows XP Mode? I don't know exactly what you mean by this. No other computers in the workgroup are running XP Mode. They are running native XP Professional. (It was my original idea to run
a physical XP laptop together with Windows 7 desktop to access the data files required, before I read about XP Mode.)
All workgroup computers can access network shares, if the user has appropriate permissions. I have shared the "Shared Documents" under XP Mode and this share can be accessed by all other computers on the network including the host. However, if I access this
share from the guest via "View Workgruop Computers" as in my first post, XP Mode instantly quits and restarts. For information the XP Mode user name and password is the same as the host user name and password.
I have checked the Event Viewer both before I first posted and again today. There are no entries recorded. However, I should have mentioned that upon restarting XP Mode I get "The system has recovered from a serious error" the details of which are:-
BCCode : 10000050 BCP1 : FFFFFF8A BCP2 : 00000001 BCP3 : F7F23661
BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1
If I send the error report I am taken to thsi web page:-
http://wer.microsoft.com/responses/Response.aspx/603/en-us/5.1.2600.2.00010100.3.0?SGD=316378af-10a1-428a-9016-074d398ed1a1
The page talks about testing RAM. RAM is fine. There is 8GB of physical RAM. It was tested with memtest86+ v2.10 and v4.20 separately. v4.20 was run for 12 hours plus with no errors detected. I have tried adjusting XP Mode RAM under settings but this makes
no difference.
The issue happens when accessing all shared directories including empty ones.
I clean booted the computer and yes the issue still exists.
If I use dos to view a directory under XP Mode the problem exists, by typing
\\SERVER\SHARE\FOLDERNAME .
By using the host I can map a shared directory. Then under XP Mode I can access the share from my computer. I have noticed by mapping S: to a Network Share that in Windows Explorer in XP Mode the path is
\\tsclient\S\ . Is this normal?
Under Windows 7 the same share appears as S:\ as I would expect.
However, I would prefer not to have to map and un-map different Network Shares to drive letters.
It should have been mentioned in my first post, host is Windows 7 Professional 64 bit. I don't know the build but it is full retail version (not upgrade) from when first released - prior to SP1. All updates have been applied including SP1.
Any help would be appreciated.
Thanks.

Design mode disabled please help

Hi all
Got to the office this morning and when I fired up Flash builder for PHP my desighn mode was disabled. I cant get this to work at all. Any idea what might be going on here?
My builder mode is set to flah not Zend... this makes no sence please help

Not sure why this disabled in the first place. Would seem a lot of other people having the same isseu with out being able to fix it.
The solution is rather imbarisingly simple. Click on window and then Enable Design Mode.
Desighn mode ont greyed out any more.

Client web browser closes abruptly when accessing forms deployed using 9iAS 1.0. 2

I am using 9iAS 1.0.2 on W2K server with SP3.I could successfully launch the application on web browser at server side.Hoever when I try to access from client machine the first time it install the Jinitiator and the web browser gets closed.
why it is happening? Appreciate any thoughts!
Thanks

The problem here is the SOAP engine running on Oracle9iAS 1.0.2.2 is a lower version than that running on Oracle9iAS 9.0.3/OC4J 9.0.3.
To get them to interoperate (e.g. 1.0.2.2 calling 9.0.3), you would have to do the following:
1. Build your Web service in OC4J 9.0.3/JDev 9.0.3
2. Deploy to 9.0.3 environment
3. Build a Web service client on the 1.0.2.2 environment, not using any 9.0.3 libraries (see below for a link to a paper to do this)
Conversely if you wanted to call from a OC4J 9.0.3 Web service client to a Oracle9iAS 1.0.2.2 Web service, you would have to do the following:
1. Build your Web service on 1.0.2.2 using 1.0.2.2 libraries
2. Deploy this to a 1.0.2.2 environment
3. Build a client to the 1.0.2.2 Web service using the 9.0.3 libraries
The reason it likely is not working is that it looks like you are mixing two different generations of SOAP libraries.
See the link below for how to build and consume Web services using Oracle9iAS 1.0.2.2:
http://otn.oracle.com/tech/webservices/htdocs/soapr1/ExploreSOAP1022.html
At the end of that paper is a link to another paper showing how to use JDeveloper 3.2 to build a Web service for 1.0.2.2 - it shows how to use its libraries versus the libraries that came with 9.0.3.
Mike.

Lync client cannot connect to Exchange Server when accessing from outside (Internet) - please HELP!

Hello,
I have full representation of the Lync 2010 from Outside (i.e. Internet), but I still have small issue related to Lync-to-Exchange integration. Clients who is using Lync client from outside (i.e. Internet) cannot see Exchange-related information including
Call Logs, Voicemail and Calendar information.
Here is the experience and error messages that anyone will see when connecting to Lync server from Outside:
And this is the error message that will be displayed on Lync phone edition devices (a.g. Polycom CX-700) when connected from Internet:
If somebody can suggest what I can try I would appreciate this very much. I do believe that many other people have this issue as well.
Thanks!

Hi, we had this issue and I ended up logging a MS support job. Turns out it was the TMG rule/Auth method causing the issue.
Job details:
**Symptom:
Lync Client External User are not able to retrieve the EWS URL
**Troubleshooting:
• We found External users are not able to Retrieve the EWS information in the Lync Client .
• We found the below error in the ETL logs.We found for EWS request we are getting the 401 response
HTTP/1.1 401 Unauthorized ( The server requires authorization to fulfill the request. Access to the Web server is denied. Contact the server administrator. )
• TMG need pass through Authentication
Public names are autodiscover.domain.com and Outlook anywhere External FQDN and paths are /ews/* and /autodiscover/*, OAB/*
Users is All Users, and Delegation is "No delegation but client may authenticate directly" on the corresponding tabs of the publishing rule.
This changes is required for Lync Client as Lync Client does not work well with this BASIC authentication on TMG .
• After TMG engineer changed this settings in the TMG users are able to see EWS information.
RELATED ARTICLES:
Configure Certificates for Servers
http://technet.microsoft.com/en-us/library/gg398995.aspx
Associate a Subnet with a Network Site
http://technet.microsoft.com/en-us/library/gg412804.aspx
Deploy Office Web Apps Server
http://technet.microsoft.com/en-us/library/jj219455.aspx
Reset-CsPoolRegistrarState
http://technet.microsoft.com/en-us/library/jj619172.aspx
Manage Access Edge Configuration for Your Organization
http://technet.microsoft.com/en-us/library/jj552443.aspx
http://technet.microsoft.com/en-us/library/gg182549.aspx
Edge Certificate
http://technet.microsoft.com/en-us/library/gg398409.aspx
Edge Deployment
http://blogs.technet.com/b/nexthop/archive/2012/05/15/lync-server-2010-geographically-dispersed-edge-topology-part-1.aspx
http://blog.schertz.name/2012/07/lync-edge-server-best-practices/
http://blog.schertz.name/2012/04/lync-server-2010-deployment-part-4/
http://technet.microsoft.com/en-us/library/gg425891.aspx
http://blogs.technet.com/b/nexthop/archive/2010/11/17/microsoft-lync-server-2010-protocol-workloads-poster.aspx
MRAS
http://blogs.technet.com/b/dodeitte/archive/2012/06/22/issues-with-mras-and-limited-external-calling.aspx
http://blogs.technet.com/b/ucedsg/archive/2011/05/09/what-can-you-tell-me-about-lync-security.aspx
IIS ARR Configuration for Lync 2013
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
http://social.technet.microsoft.com/wiki/contents/articles/15893.iis-arr-url-rewrite-for-lync-2010-reverse-proxy.aspx
Archiving Options in Lync Server 2013
http://blogs.technet.com/b/dodeitte/archive/2013/04/24/archiving-options-in-lync-server-2013.aspx
http://blogs.technet.com/b/dodeitte/archive/2013/06/02/sample-lync-server-archiving-report-available.aspx
Microsoft Lync Server 2010 Resource Kit
http://www.microsoft.com/en-us/download/details.aspx?id=22644
Microsoft Lync Server 2013
http://technet.microsoft.com/en-us/library/gg398616.aspx
Microsoft Lync Server 2013 RTM Documentation
http://blogs.technet.com/b/nexthop/archive/2012/10/24/microsoft-lync-server-2013-preview-rtm-documentation-now-available.aspx
Release Notes for Lync Server 2013
http://technet.microsoft.com/en-us/library/jj205120.aspx
Integrating Exchange 2013 Preview and Lync Server 2013 Preview
http://blogs.technet.com/b/nexthop/archive/2012/07/23/integrating-exchange-2013-preview-and-lync-server-2013-preview.aspx.
Migration from Lync Server 2010 to Lync Server 2013
http://technet.microsoft.com/en-us/library/jj205369.aspx
Lync Online Resource
http://www.microsoft.com/en-in/download/details.aspx?id=13602

Can CS6 exploit the GPU on my desktop when accessed from my laptop with RDP?

Just to clarify further: both machines running windows 7 professional or better (so the full version of RDP is available), and CS6 runiing on the desktop, accessed from my laptop.
As the GPU is being used as a compute resource, will CS use the desktop GPU for acceleration?
sad day if not - I am considering ditching expensive laptops and use a medium spec laptop together with a good gutsy desktop (which is about 1/3rd the price / performance) as I have a good network to run over at home.

The water is somewhat muddied. I have only a Windows 7 and Windows 8 system to try it with at the moment.
This is what I got when I RDP'd into a Windows 8 VM from Windows 7:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 4
Processor speed: 3159 MHz
Built-in memory: 4095 MB
Free memory: 3104 MB
Memory available to Photoshop: 3466 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 8/21/2012 at 5:33:29 PM
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1600
No video card detected
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\TEMP\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 159.7G, 134.6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: \\Noelc4\c\DEV\ProDigital\trunk\plugins\Output\Win\LastBuild\x64\
I have Photoshop working okay on the above system using the OpenGL VMware provides when I log directly into the console...
I don't think the above failure says anything definitive one way or another what's up with your particular request yet, though it does tell me I need to do some additional testing to try to understand what's happening so that I know how my own products are going to behave in this situation.
I have a Windows 7 VM I can test with. Watch this space...
-Noel

When accessed from Firewall, the OSB WSDL is inserting schemalocation with HTTP port instead of HTTPS

We have OSB service and we are able to access over firewall. Also the WSDL, Schemas etc., But when we external users access the WSDL, they are not able to get complete content i.e schemas are not imported.
Reason is WSDL has http (<import schemaLocation="http://test.com:80/xxxxxx/Proxy/schema") with port no 80 instead of https (<import schemaLocation="https://test.com/xxxxxx/Proxy/schema") .
Since we don't specify the complete schema location in WSDL, how does WSDL include the complete schema path? And how to change it https path instead of http?

Namaste,
Sorry for the delayed response.
Yet, my one query is not answered.
Q:Are you ABLE to get the Desired path in Endpoint URL(https) as well?
Explanation:
What I mean is, When the external users access the WSDL (I am assuming External Users are able to access WSDL through Firewall),
As you have mentioned that XSD imports have HTTP instead of HTTPS, but how about the soap:address location? Even this points to HTTP instead of HTTPS?
(Ex:
<wsdl:service name="CaduceusSiteService">
    <wsdl:port name="site_pt" binding="tns:site_pttBinding">
        <soap:address location="https://www.test.com/test123"/>    ---> is this HTTP or HTTPS?
    </wsdl:port>
</wsdl:service>
BTW, did you set, HTTP Transport Configuration --> HTTPS required parameter to "YES"? (This is a prerequisite).
We had a similar issue, where we had HTTP instead of HTTPS when WSDL accessed from Firewall.
However, after lot of struggle, we got it worked after changing Firewall (MS TMG) settings to support for "text/xml".
I think, it could be the same settings needed to done in your case too. Please do check the firewall settings.
Thanks,
Nagaraj Ganapa

Lync 2013 webapp URL asking credentials when accessing from web-browser

Hi, when I tried to access Lync2013 Webapp URL , I am being asked for asked enter credentials to display options to join meetings.
screenshot attached...

Hi,
Which Website Browser did you use?
Did the issue happen only for you or for multiple users?
Please test on other computer.
Please double check anonymous access settings and conference policies, make sure “enable anonymous user access to conferences” enabled.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Pages not displaying images when accessed from remote system-error on page.

Urgent pls help...
Hi,
We installed 10G database and installed application express.
we installed apex using the command @apexins SYSAUX SYSAUX TEMP /i/
then changed password using @apxchpwd
then @apxldimg.sql D:\oraclexe
we installed databse in D:
in D:/oraclexe we copied apex folder and done the above operations.
we run the listener using command
java -Dapex.home=D:/oraclexe/apex -Dapex.images=D:/oraclexe/apex/apex/images -Dapex.port=8585 -jar D:/oraclexe/apex/apex.war
then for four days it was working fine,
our team can access pages from client system and we were working on our project.
But for the last two days it is not working properly. I mean apex is loading with errors(without images).
the page is showing without images and links are not working
just data's in pages is only seen.
But when i connect through localhost it is working properly.
we installed it on server then there also localhost:8080 is working
but from client system has the above said problem
Give us a solution...
Thanks in advance...
Edited by: 874343 on Jul 22, 2011 5:26 AM

ListenerAdmin is showing blank screen
this is my command prompt when running listener
D:\oraclexe>cd apex
D:\oraclexe\apex>java -Dapex.home=D:/oraclexe/apex -Dapex.images=D:/oraclexe/ape
x/apex/images -Dapex.port=8585 -jar D:/oraclexe/apex/apex.war
INFO: Starting: D:\oraclexe\apex\apex.war
See: 'java -jar apex.war --help' for full range of configuration options
INFO: Extracting to: D:\oraclexe\apex
INFO: Using classpath: file:/D:/oraclexe/apex/apex/____embedded/start.jar:file:/
D:/oraclexe/apex/apex/WEB-INF/lib/apex.jar:file:/D:/oraclexe/apex/apex/WEB-INF/l
ib/commons-fileupload-1.2.1.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/je-4.0.1
03.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/D:/oraclexe/apex
/apex/WEB-INF/lib/ojmisc.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/poi-3.6-200
91214.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/ucp.jar:file:/D:/oraclexe/apex
/apex/WEB-INF/lib/xdb-11.2.0.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/xmlpars
erv2-11.2.0.jar:
INFO: Starting Embedded Web Container in: D:\oraclexe\apex
Jul 22, 2011 6:48:19 PM ____bootstrap.Deployer deploy
INFO: Will deploy application path=D:\oraclexe\apex\apex\WEB-INF\web.xml
Jul 22, 2011 6:48:19 PM ____bootstrap.Deployer deploy
INFO: deployed application path=D:\oraclexe\apex\apex\WEB-INF\web.xml
Using config file: D:\oraclexe\apex\apex-config.xml
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.2.131.15.23
APEX Listener server info: Grizzly/1.9.18-o
Jul 22, 2011 6:48:44 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Fri Jul 22 18:48:44 IST 2011
INFO: http://localhost:8585/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
Edited by: 874343 on Jul 22, 2011 6:42 AM
Edited by: 874343 on Jul 22, 2011 6:51 AM

Website not found when accessed from iPad

I am hosting multiple websites from a single IP address and have come across the following problem. If I access it from my mac, the correct website is displayed, but if I use my iPad the web site is not found and my default website displays instead.
Checking the access log I can see a clear difference between what is passed from a mac and an ipad but don't know how to fix it, any suggestions greatly appreciated.
The Mac sends this
www.parksurgery-hursleyrd-ppg.org.uk 81.138.225.73 - - [03/Oct/2013:00:15:11 +0100] "GET / HTTP/1.1" 200 4857 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0"
The iPad sends this
www.advtraining.co.uk 192.168.1.73 - - [03/Oct/2013:00:22:03 +0100] "GET / HTTP/1.1" 200 7847 "http://www.parksurgery-hursleyrd-ppg.org.uk/" "Mozilla/5.0 (iPad; CPU OS 7_0 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11A465 Safari/9537.53"
the website I am trying to display is www.parksurgery-hursleyrd-ppg.org.uk

Me too. 34000+ items.
Gotta wonder if that's a factor.
Just now I removed all remotes from iTunes.
(Prefs > Devices > Forget All Remotes)
Then I turned on Home Sharing on my iPhone.
(Tap the gear icon in the Library selection screen.)
Previously the iPhone was registered as a regular remote.
So both devices are controlling iTunes via home sharing.
Now iTunes is not crashing at all, in full-screen mode or otherwise.
Not sure if it will last, but time will tell.
Hope this is useful to you.
I'll post back if the crashes return.

WebI Design Mode disabled when accessed from BI Launchpad Applications

Similar Messages

Maybe you are looking for