Webi does not pick correct Data

Hi Guys,
I have a webi. The Universe for the Webi is based on Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
I have checked following points already:-
1] No Resstriction at Query Level
2] No restriction at Universe Level
3] No Filters/ Restriction at Webi Level.
Can anyone suggest whats happening?
Regards

Hi Ray,
It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
This will give you the idea about aggregation.
Regards
Vineeta

Similar Messages

LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

Timestamp when saved in text file and reloaded does not give correct dates

Hello
I am struggling with time stamp. I have almost corrected the problem but it is not as good as I expect it to be.
I have data in the main vi which logs into text file with time stamp for everyday results logs.
I then pull all this data to display on waveform graph with the performance data on y axis and time stamp on x axis.
I convert the time stamp data from string back to time stamp using scan from function in string pallette. When I run the waveform graph vi. The time stamp data is not correct one. I see year values beginning 1974 etc. I change these values to 2011 and the correct dates and then could see the accurate logged data from data logger but I would like to have the starting date in my logged file the left most date on x-axis. I try modify dates in display format section of waveform graph but I think it gives the values in seconds which doesn't make much sense to me. Is it possible to automatically set the starting value of the graph as the first date in the logged file? I am new with using time stamps. Any feedback will be appreciated.
Kind Regards
Austin

Hi Austin,
"Is it possible to automatically set the starting value of the graph as the first date in the logged file?"
Sure: Use autoscaling, format x-axis as time and use waveforms with correct t0 value...
For all other questions you should attach a VI to show your current state of programming!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Color picker does not pick correct colors

I have a Samsung Galaxy Note 10.1 with pre-installed PS Touch. Has anyone else noticed how the color picker doesn't always pick correct colors? In my case, it picks a slightly darker color than the source color. I wanted to upgrade to version 1.3 to resolve this, but cannot find any upgrade option anywhere. Please help!

This screenshot is of a normal layer at opacity 100%. I first did a uniform color fill, then sampled the color. Every area of color, therefore, ought to be exactly the same, without any slight variation whatsoever.
The two brushstrokes to the left are done with the brush hardness set at 20%, with no pressure related controls, the left-most one set at 20%opacity, and the one to the right of it set to 100% opacity.
The two brushmarks in the middle are done with brush hardness set to 100%, again, no pressure related controls, the leftward one set at 20% opacity, the right at 100 %.
The two to the right are again done with 100% brush hardness, but this time, pressure related opacity control has been enabled. The left is at 20% opacity, the right at 100%.
As you can see, the center of each brushstroke seems to have thecorrect color. So I agree with georg_maximus. It appears that this issue is an opacity related one, rather than a color picker problem.

Discoverer Report opened from Portal does not show correct data

Hi,
When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
Does anyone know what the reason could be for this?
Thank you,
Santoshi

I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
Generally you specify the refresh time to be sometime after your usual database load completes.

Report not picking correct data

Is it possible for vendor aging report to dispaly for Particular Vendor the
amount ( bsik-dmbtr ) using Purchase organization field.
There are two Purchase Organizations C100 ( for CPU ) and D100 ( for Monitor ) in my case.
data is picked from bsik , lfm1 ,lfa1 tables.
Example : if D100 is for Monitor-screen and has amount 1000.
c100 is for CPU and has amount 2000.
In that case report with Vendor , comp code, Pur. Orga and period should disply
c100 amount 2000.
D100 amount 1000.
my report is showing that vendor is existing for C100 or D100.
but for vendor that exist in both C100 and D100. ( Say vendor number 200 )
the amount is coming for vendor number 200 in c100 and d100 equal to 1000.
but it should come c100 = 2000
and for d100 = 1000.

hi
I am not sure about this point in vendor aging report. i have added a pur Organization field in this report.
I am asking
If vendor no 123 is in D100 and C100 ( D100 and C100 are Pur Organizations )
Initially no transaction is there.
Suppose vendor no 123 created a Puchase Order of 500 /- using D100 Purchase Organization in duration 01.01.2008
to 01.01.2009
But vendor no 123 in Purchase Organization C100 has no transaction.
Then 123 with D100 is sould show 500/-
and 123 with C100 is 0 /-.
output of this report should show above results ?
If output is like this then how to rectify my report ?
Or it shoud show the result like this
Then 123 with D100 is sould show 500/-
and 123 with C100 is 500 /-
My output is showing like above same
Thanks

Report refresh does not contain correct data

Hi all,
I'm having a problem with an interactive report. this report contains checkboxes for each row.
When clicking the submit button, a process is called which changes the status of the checked records.
This status change should cause the IR to not query these records anymore after the submit, but they still appear even though i did a commit after the proces.
When i refresh the page the correct records are removed from the report.
Is this normal because i thought the page processes are completed before branching is executed.
Grtz,
Mario

my mistake, i was doing a query with sysdate in the where clause, but when using systimestamp this problem was solved.

Export to PDF from Infoview does not show correct data - CRS 2008

I have a problem where users attempt to export a report from the Infoview interface to a PDF. The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values. To troubleshoot, I have tried this on different clients - without a change in the result. I have also pulled the latest instance of the report from this history on the Central Management Console. Interestingly enough, the same thing happens when I export to a PDF from there as well. Any insight or help would be greatly appreciated. Thanks!

Hello,
I can't tell you offhand on what the issue is here, as various factors come into play.
Here are a few troubleshooting steps you can try:
- Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
- Instead of viewing the report and export; schedule a report to PDF and check the results.
- there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
Regards,
Duncan

F.07 does not pick correct customer balance

I have two customer accounts for which upon running the transaction F.07 ,in test mode , it is returning the cumulative balance from last year( the top line in FD10N) . But in our test system , it is giving the correct balance . Test system was refreshed before year-end.
Why is it not returning this year's balance in Production?
Thanks
Edited by: MN on Feb 7, 2010 8:33 PM

Hi,
check for any authorization issues.
Regards

Comcast home pge thru firefox does not have correct date, using ie i have the correct date

when i open comcast using firefox, date on homepage is november 5, when i use internet explorer date is correct

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". Please help!!!

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!

Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app.

Apple Configurator: "Policy does not have correct profile data."

I keep getting the message "Policy does not have correct profile data." when I'm trying to prepare new devices in Apple Configurator 1.2. Existing devices work fine, and I was able to prepare a few new devices before getting this error. Any advice besides "wipe and restart" AGAIN?

defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
should eliminate the problem, though it will partially reset the default settings in the Prepare pane. Did you delete a configuration profile that had been checked in the Prepare settings?

CRM 2007 IC : error "BP category 2 does not fit the data in category 1"

Hi Guys,
When I am trying to save the data on the Bupacreate page it gives the error as follows.
"BP category 2 does not fit the data in category 1".
Can anyone suggest what is causing this error to happen and how this error can be corrected.
thanks & regards
Sandy

Hi,
This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
Best regards
Pankaj Kumar

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Webi does not pick correct Data

Similar Messages

Maybe you are looking for