WebI does not return failed when scheduling a report which only holds parti
WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM
Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini
Similar Messages
-
My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help
If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.
-
OCIStmtExecute does not return immediately when client is busy.
Hi.
I'm testing a very busy multi-threaded client server that consistently generates
a large number of simple queries through oci. The problem is that, when the
server(client) is busy, OCIStmtExecute does not return immediately in
non-blocking mode.
Of course I have set non-blocking mode and OCIStmtExecute does return
OCI_STILL_EXECUTING immediately when the server is not busy. But
when log rotation occurs which concatenates a large text file (~500MB)
onto an even larger text file (up to several giga bytes), or when I simply copies
or concatenates large text files manually, OCIStmtExecute returns very slowly.
(roughly about after 100~200ms)
However, while log rotation takes place, everything else including other oci
calls that come before OCIStmtExecute (prepare, define) return fast. So
for me it really seems that only OCIStmtExecute becomes extremely slower
when local server (especially the disk) is busy.
Is there any way to let OCIStmtExecute immediately return all the time?
Thanks in advance.Yes, I knew that OCIStmtExecute would be the only function that causes such
delay and that was why I traced that call. And so far, I checked several times
what happens at the exact moment on the server but everything was ok.
Actually OCIStmtExecute becomes slower exactly when crontab-ed log rotate
occurs so I think this delay must be a client-side problem for now.
This server is quite busy and has to respond fast, so it is important to
guarantee fast response time while a small number of timeout losses are tolerable.
But as OCIStmtExecutes' first OCI_STILL_EXECUTING return takes hundreds of
ms it has become more like a blocking call and currently I cannot find any way to do what I want.
So now everytime such thing happens, the thread waits
quite long, after the first OCI_STILL_EXECUTING return
the time difference exceeds timeout limit, and the thread
calls OCIBreak() and OCIReset() and returns. -
Oracle Text does not return results when String starts with two consecutive vowels
Hi,
I hope someone can shed some light on a strange problem we're facing.
Oracle Database 11g R2 (11.2.0.4) EE 64-bit running on Windows 2008 Server R2.
When I create a context index on a varchar2 column (surname) it works fine when the surname starts with either a consonant or one vowel. But when the surname starts with two vowels it fails to return the record?
Please see worked example below:
create table t1 (surname varchar2(50));
insert into t1 values ('OURS');
insert into t1 values ('JOURS');
insert into t1 values ('ONES');
commit;
-- sync every 10 mins
CREATE INDEX PERSON_SURNAME_IDX ON t1
(SURNAME)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('MEMORY 50M sync (every "SYSDATE+10/1440")')
NOPARALLEL;
-- no rows
SELECT surname
FROM t1
WHERE CONTAINS(surname, 'OURS') > 0;
-- 1 row
SELECT surname
FROM t1
WHERE CONTAINS(surname, 'JOURS') > 0;
-- 1 row
SELECT surname
FROM t1
WHERE CONTAINS(surname, 'ONES') > 0;
Any help or guidance greatly appreciated.
Thanks,Wtf?
https://docs.oracle.com/database/121/CCREF/astopsup.htm#i634475
only then where
all do into onto there whether
almost does is or therefore which
also either it our these while
although for its ours
select
from v$version
Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production 0
PL/SQL Release 12.1.0.2.0 - Production
CORE 12.1.0.2.0 Production
TNS for Linux: Version 12.1.0.2.0 - Production
NLSRTL Version 12.1.0.2.0 - Production
SELECT spw_stoplist, spw_word FROM ctx_stopwords
WHERE spw_stoplist ='DEFAULT_STOPLIST'
order by nlssort(spw_word, 'NLS_SORT=LATIN')
---- snip ----
DEFAULT_STOPLIST not
DEFAULT_STOPLIST of
DEFAULT_STOPLIST on
DEFAULT_STOPLIST one
DEFAULT_STOPLIST only
DEFAULT_STOPLIST or
DEFAULT_STOPLIST other
DEFAULT_STOPLIST out
DEFAULT_STOPLIST over
DEFAULT_STOPLIST s
---- snip ---- -
Hi,
po_headers_sv3.get_po_status is not returning any value when used in an RDF report. But, when I set the MO Context in TOAD/SQL*Plus and running the same query, it is returning the status.
EBS Version : R12.1.3
Oracle Forms Version : 10g
Below is my query that I used.
* File Name :
* Modified By :
* Modified Date :
* Purpose : This report is modified for <> project. The changes are required due to PO_HEADERS_V, PO_LINES_V view changes in R12
* Modification History
* Change 1 : Replaced the view PO_HEADERS_V with the MOAC synonym PO_HEADERS
* Change 2 : Added AP_SUPPLIERS in the query to fetch VENDOR_NAME
* Change 3 : Added a join condition to fetch VENDOR_NAME
* Change 4 : Added a function po_headers_sv3.get_po_status to fetch PO_STATUS
SELECT POH.SEGMENT1,
POH.CREATION_DATE,
POH.ATTRIBUTE14 AS AR,
POH.ATTRIBUTE15 AS LS,
POH.ATTRIBUTE13 AS OBC,
POL.AMOUT,
PAHTEMP.FULL_NAME,
APS.VENDOR_NAME,
* poheaders_sv3.get_po_status (poh.po_header_id) Status -- Change 4 _+
FROM PO_HEADERS POH, -- Change 1
AP_SUPPLIERS APS, -- Change 2
(SELECT PO_HEADER_ID,
Sum(UNIT_PRICE*QUANTITY) AS AMOUT -- unit_price* quantity = extended_price
FROM PO_LINES
GROUP BY PO_HEADER_ID) POL,
(SELECT PAH.OBJECT_ID,
PAH.EMPLOYEE_ID,
PAPF.FULL_NAME
FROM PO_ACTION_HISTORY PAH,
PER_ALL_PEOPLE_F PAPF
WHERE (PAH.OBJECT_ID,
PAH.SEQUENCE_NUM)
IN (SELECT OBJECT_ID,
Max(SEQUENCE_NUM)
FROM PO_ACTION_HISTORY
WHERE OBJECT_TYPE_CODE = 'PO'
AND ACTION_CODE = 'APPROVE'
GROUP BY OBJECT_ID)
AND PAH.EMPLOYEE_ID = PAPF.PERSON_ID(+)
AND TRUNC(PAPF.EFFECTIVE_START_DATE) <= TRUNC(SYSDATE)
AND TRUNC(PAPF.EFFECTIVE_END_DATE) >= TRUNC(SYSDATE)) PAHTEMP
WHERE POH.PO_HEADER_ID = POL.PO_HEADER_ID(+)
AND POH.PO_HEADER_ID = PAHTEMP.OBJECT_ID(+)
AND POH.VENDOR_ID = APS.VENDOR_ID -- Change 3
AND (TRUNC(POH.CREATION_DATE) >= TRUNC(:P_DATE_FROM) OR :P_DATE_FROM IS NULL)
AND (TRUNC(POH.CREATION_DATE) <= TRUNC(:P_DATE_TO) OR :P_DATE_TO IS NULL)
AND (POH.SEGMENT1 >= :P_NUM_FROM OR :P_NUM_FROM IS NULL)
AND (POH.SEGMENT1 <= :P_NUM_TO OR :P_NUM_TO IS NULL)
AND (POH.ATTRIBUTE13 >= :P_OBC_FROM OR :P_OBC_FROM IS NULL)
AND (POH.ATTRIBUTE13 <= :P_OBC_TO OR :P_OBC_TO IS NULL)
AND (POH.ATTRIBUTE14 >= :P_AN_FROM OR :P_AN_FROM IS NULL)
AND (POH.ATTRIBUTE14 <= :P_AN_TO OR :P_AN_TO IS NULL)
AND (POH.ATTRIBUTE15 >= :P_LS_FROM OR :P_LS_FROM IS NULL)
AND (POH.ATTRIBUTE15 <= :P_LS_TO OR :P_LS_TO IS NULL)
&LP_CONDITION_ORDER
Please help me in this.learnt that PO number has generated in SRM and the same PO number not exist in ECC.
check SM58 , rz20 log or Application monitor for the shopping cart.
or monitor shopping cart click the icon follow on document and errror message must throw in 1 minutes.
let us see .
1. what is the settings in define backend OBJECTS
2. check all basic data in the shopping cart - especially org data
3. run bbp_check_consistancy report for your id?
4. every user has the same issue?
SEE THE RICHARDO technique
http://wiki.sdn.sap.com/wiki/display/SRM/ShoppingCartStatusI1111-+Resubmit
Muthu
Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
1480994 How to process a shopping cart with status I1111
Edited by: Muthuraman Govindasamy on Jul 16, 2010 11:31 PM -
Automator - Run Shell Script - Does not return when script launches firefox
Automator does not work the same on my MacBooks as my Mac mini! Both are latest Snow Leopard. I'm trying to automatically setup my MacBook after it decides if I'm at work, or elsewhere.
The Automator Action "Run Shell Script" (Shell: /usr/bin/perl) does NOT return control when attempting to launch Firefox:
system("/Application/Firefix.app/Contents/MacOS/firefox-bin -private news.google.com &");
Note: the ampersand should cause Firefox to start as a background process.
It only returns control after I close Firefox. I have a "Show Growl Notification" as the second action, so I know that the first action has not completed. Odd thing is that this works on my Mac mini. I also noticed that another difference: on my MacBook status is displayed in the top toolbar when the Automator application is running.
Any ideas?Thanks, it worked. I forgot about stderr and stdin.
I'm using Perl as it is part of a bigger script. I can quickly and easily figure out if I am at work where my MacBook is plugged into a network:
my $ethernet = qx(ifconfig en0) =~ m{status:.active}xms;
if ($ethernet) {
# setup stuff for work environment
} else {
# setup stuff for mobile environment
} -
# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
Mockery context = new Mockery();
final MessageListener messageListener = context.mock(MessageListener.class);
final Latch latch = new LatchImpl();
final String prefix = "test" + System.currentTimeMillis();
context.checking(new Expectations() {
oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
will(new CustomAction("release latch") {
@Override
public Object invoke(Invocation invocation) throws Throwable {
latch.unlatch();
return null;
final Connection connection = createConnection(null, null);
Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
connection.start();
Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
final MessageConsumer consumer = session.createConsumer(wildcardTopic);
consumer.setMessageListener(messageListener);
MessageProducer producer = session.createProducer(null);
producer.send(destination, session.createTextMessage("MSG1"));
latch.await(5000);
connection.close();
Thread.sleep(5);
context.assertIsSatisfied();Check where your MDB sends the [response] messages to.
-
CQWP does not return result for a specific query when filtering on a managed metadata field.
Hi,
We are facing a serious production issue. We've search the web extensively but to no avail.
Problem:
CQWP does not return result for a specific query when filtering on a managed metadata field.
ULS log:
The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
Query:
The query is as follows:
(I've translated this from dutch so pardon any typo's)
Query: (top selection) Display items from all sites in the site collection
ListType: Documentlibrary
Contenttype:
Items from this group:Custom Document Contenttypes
Items from this content type: Verklaring
Filter: Soort is equal to X
extra info: the field soort (Type) is a managed metadata field that was assigned the value X
Managed Metadata Structure:
-managed metadata service
-Contoso
-Enterprise Taxonomy (term set)
-Document (term)
-Verklaring (term)
-Soort (term)
-x (term)
EXTRA INFO:
When I modify the filter to filter on Title the CQWP DOES return the correct document!
When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
QUESTION:
Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
Why does the CQWP return the document when filtering on a managed metadata field over a single library.
(The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
Here are the ULS logs.
Product: Web Content Management
Category Publishing
Level: Monitorable:
CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien. Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien. Probeer
het opnieuw. bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)
bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns) --- Einde van intern uitzonderingsstackpad
--- bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
ISP2DSafeArrayWriter pCallback, Object& pvarColumns) bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query) bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
siteDataQuery, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)
bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query: '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
Product: Web Content Management
Category Publishing
Level: Warning
Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien. Probeer het opnieuw.
at the following url: /. Titel webonderdeel: Inhoudsquery
Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
Product: Web Content Management
Category Publishing
Level: Medium (this message is displayed 14 times)
ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.Hi,
while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
We have a fairly large term store (4000+ lines).
If somebody has a clue or tip that would greatly appreciated!
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql. This can result in blocking in sql and excessive memory use on the front
end. Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components. If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed: bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
SqlQueryData monitoringData) bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
retryfordeadlock) bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns) bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
pCallback, Object& pvarColumns) bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query) bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid) bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
site, String webUrl, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery() bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
viewPath) bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()
bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind() bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound() bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()
bij System.Web.UI.Control.EnsureChildControls() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal()
bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) bij System.Web.UI.Page.ProcessRequest()
bij System.Web.UI.Page.ProcessRequest(HttpContext context) bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context) bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
context) bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
wr, HttpContext context) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c -
Why does my function not return anything when I create as a schema object
I have user ABC who owns several tables some of which have foreign key constraints.
I have user XYZ that has been granted access to all tables owned by user ABC.
When I create a function as user XYZ using following I get no return when I issue:
select XYZ.ztm_tables_depended_on('ABC', 'A_TABLE_OWNED_BY_ABC') from dual :
Please see after function definition.
CREATE OR REPLACE FUNCTION ZTM_TABLES_DEPENDED_ON(p_Owner VARCHAR2, p_Table_Name VARCHAR2) RETURN VARCHAR2 IS
CURSOR C1 IS
SELECT OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME
FROM ALL_CONSTRAINTS
WHERE OWNER = p_Owner
AND TABLE_NAME = p_Table_Name
AND CONSTRAINT_TYPE = 'R'
ORDER BY OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME;
v_Referenced_Owner VARCHAR2(31);
v_Ret_Val VARCHAR2(4000);
FUNCTION CONSTRAINT_TABLE_NAME(p_Owner VARCHAR2, p_Constraint_Name VARCHAR2) RETURN VARCHAR2 IS
CURSOR C1 IS
SELECT TABLE_NAME
FROM ALL_CONSTRAINTS
WHERE OWNER = p_Owner
AND CONSTRAINT_NAME = p_Constraint_Name;
v_Ret_Val ALL_CONSTRAINTS.TABLE_NAME%TYPE;
BEGIN
OPEN C1;
FETCH C1 INTO v_Ret_Val;
CLOSE C1;
RETURN v_Ret_Val;
END;
BEGIN
FOR R IN C1 LOOP
IF (R.OWNER <> R.R_OWNER) THEN v_Referenced_Owner := R.R_OWNER || '.';
ELSE v_Referenced_Owner := NULL;
END IF;
v_Ret_Val := v_Ret_Val || ', ' || v_Referenced_Owner || CONSTRAINT_TABLE_NAME (R.R_OWNER, R.R_CONSTRAINT_NAME);
END LOOP;
RETURN LTRIM(v_Ret_Val, ', ');
END;
But, if I embed the function within an anonymous block as follows, I get results:
DECLARE
CURSOR C1 IS
select owner, table_name
FROM all_tables where owner = 'ABC';
FUNCTION ZTM_TABLES_DEPENDED_ON(p_Owner VARCHAR2, p_Table_Name VARCHAR2) RETURN VARCHAR2 IS
CURSOR C1 IS
SELECT OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME
FROM ALL_CONSTRAINTS
WHERE OWNER = p_Owner
AND TABLE_NAME = p_Table_Name
AND CONSTRAINT_TYPE = 'R'
ORDER BY OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME;
v_Referenced_Owner VARCHAR2(31);
v_Ret_Val VARCHAR2(4000);
FUNCTION CONSTRAINT_TABLE_NAME(p_Owner VARCHAR2, p_Constraint_Name VARCHAR2) RETURN VARCHAR2 IS
CURSOR C1 IS
SELECT TABLE_NAME
FROM ALL_CONSTRAINTS
WHERE OWNER = p_Owner
AND CONSTRAINT_NAME = p_Constraint_Name;
v_Ret_Val ALL_CONSTRAINTS.TABLE_NAME%TYPE;
BEGIN
OPEN C1;
FETCH C1 INTO v_Ret_Val;
CLOSE C1;
RETURN v_Ret_Val;
END;
BEGIN
FOR R IN C1 LOOP
IF (R.OWNER <> R.R_OWNER) THEN v_Referenced_Owner := R.R_OWNER || '.';
ELSE v_Referenced_Owner := NULL;
END IF;
v_Ret_Val := v_Ret_Val || ', ' || v_Referenced_Owner || CONSTRAINT_TABLE_NAME (R.R_OWNER, R.R_CONSTRAINT_NAME);
END LOOP;
RETURN LTRIM(v_Ret_Val, ', ');
END;
BEGIN
FOR R IN C1 LOOP
DBMS_OUTPUT.PUT_LINE(ztm_tables_depended_on(R.Owner, R.Table_Name));
END LOOP;
END;
Any ideas what is happening here?Any ideas what is happening here?
Justin explained the probable reason.
See the 'How Roles Work in PL/SQL Blocks' section of the database security doc for the details
http://docs.oracle.com/cd/E25054_01/network.1111/e16543/authorization.htm#i1007304
How Roles Work in PL/SQL Blocks
The use of roles in a PL/SQL block depends on whether it is an anonymous block or a named block (stored procedure, function, or trigger), and whether it executes with definer's rights or invoker's rights.
Roles Used in Named Blocks with Definer's Rights
All roles are disabled in any named PL/SQL block (stored procedure, function, or trigger) that executes with definer's rights. Roles are not used for privilege checking and you cannot set roles within a definer's rights procedure.
The SESSION_ROLES view shows all roles that are currently enabled. If a named PL/SQL block that executes with definer's rights queries SESSION_ROLES, then the query does not return any rows.
Roles Used in Named Blocks with Invoker's Rights and Anonymous PL/SQL Blocks
Named PL/SQL blocks that execute with invoker's rights and anonymous PL/SQL blocks are executed based on privileges granted through enabled roles. Current roles are used for privilege checking within an invoker's rights PL/SQL block. You can use dynamic SQL to set a role in the session.
See that line starting with 'All roles are disables in any named PL/SQL block'? -
VOD Sound drop at commercials and does not return when TV show resumes
i've noticed that there are other customers experiencing this problem and I have not seen any response from COmast support.When playing a TV-Show from On-Demand, the sound drops when a commerical starts and does not return when the TV Show resumes.A reenct example: Walking Dead 515.Yes, I have called comcast support to report it.Of course they wanted me to go through the standard drill - Power Off/On; Refresh Signal; etc. with no result...The problem occurs on series, e.g. - Walking Dead 515; Grey's Anatomy; It happens after the episode has been in the On Demand listing for about a week.It seems that the sponsors are no longer paying for the commercial, so the sound drops when the commercial comes on.However, the sound does not come back when the commercials end and the show comes back on.Stopping playback and starting at that point returns the sound, but, - oftentimes, the counter doesn't advance correctly in the Recently Viewed listing, so you end up starting back to the last time you stopped it. This is clearly a bug on the back-end, and I don't expect it to be fixed until enough people complain and Comcast Support replicates the problem observes it for themselves.
I have this EXACT problem on Anthony Bourdain's show Parts Unknown and the Last Ship. As soon as it hits the advertizement sound drops and continues as dropped. Pausing and restarting the program completely after exit regains sound but as soon as it hits another commercial it goes out again. The counter problem makes this option only good for a few times. Then it resets back.
-
I have a list in SharePoint 2013 with a people picker field. I am trying to retreive the list info on cient side in javascript. URL does not take lookup field display name (as stated in some articles) but it was taking AssignedPAId instead. However further
expands does not return any thing. I need to return the assigned to user name in this case.
List columns
Title
primaryowner
AssignedPA (People or Group field)
REST Query URL:
_api/Web/Lists/GetByTitle('demolist')/items?$select=Title,primaryowner,AssignedPAId/Name&$expands=AssignedPAId/Name
It keeps returning me Id only regardless i am asking /Name.
Any help on query? Please suggest a working query only. i have already googled/binged enough.........................
Moonis Tahir MVP SharePoint,MCTS SharePoint 2010/2007, MCPD.net, MCSD.net, MCTS BizTalk 2006,SQL 2005Hi,
According to your post, my understanding is that you want to get the user name of the people picker control.
To get the user name in the people picker control, we can use the SPService to achieve it.
There is a function called
SPFindPeoplePicker , we can use this function to get the display name.
There is an article about this topic, you can refer to it.
http://sympmarc.com/2012/04/22/working-with-sharepoint-people-pickers-with-jquery-a-new-function-called-findpeoplepicker/
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
I have internet connection but myh incoming email does not appear. When I try to access new emails it says, "connection to server has failed". Help
What did your email provider say about it when you contacted them?
-
Web proxy not returning all elements
Web proxy generated over a web service does not return all elements of an array. Testing of the web service on the application server results in three detail elements. However executing the web proxy only results in the first element being processed. Not sure where the disconnect is when generating the response object. Any suggestion is appreciated.
Edited by: bstegen on Jul 29, 2009 12:53 PMHi,
I have also tried using 'Web Service Data Control' as an alternate method to overcome the above mentioned issue. But I have ended up the error "DCA-29000: Unexpected exception caught: java.lang.NullPointerException,msg=null" and failed to create a data control.
The JDeveloper version which I am using is 11.1.1.5.0. I also came to know that there is a patch (9790388) which has resolved this bug in JDeveloper. I also applied the same patch in my Oracle Home using OPatch utility.
But unfortunatley, the version suitable for this patch is 11.1.1.4.0 and I suspected that could be one of the reason that the problem has not got resolved yet.
Please suggest the patch or any solution which can also help me in resolving this issue. I really appreciate your time and effort in sharing your thoughts for the problems which I have mentioned over here.
Thank you !!!
With Regards,
Thiyagarajan V -
My PC does not return to the source document I print from
I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support
Maybe you are looking for
-
ANSI Z535.1 Safety Colors in Frame
Frame 7.1 Solaris (Frame 9 Win7 available). Although the manuals I work on are print-published only in grayscale (600 dpi bitmap, actually), we make them available on the web as PDFs (which could be in color). At some point in the future, we may publ
-
Would cloning the drive be appropriate course of action?
Hello. I am considering purchasing my first Mac which is from liquidated stock originally owned by a film company. This is a new 2009 MacBook Pro 15.4" that will come loaded with quite a bit of high-end graphics software including Adobe CS4 Master Co
-
Personnel develomnent -qualiifcation
Hi, We are in implementation(activate only Business content(BCT)) of BI. I would like to know how to work with personnel development-qualification(infosource 0HR_PA_PD_1 & infocube 0PAPD_c01) to extract data & see the data. I am new to BI if any bod
-
Hello there, Our I-SU DFKKOP table increases day after day (today ~ 90000000 rows and 50 Gb). In despite of index compression which really improved some queries, we want move foreward towards partitioning. I have read this paper http://www.oracle.com
-
Premiere cs5 problem preview with mpeg 2 file
hi i've another question i open a new premiere cs 5.0.3 project with a matrox sequence lower filed i import a dv tape from matrox firewire, and edit the file and export an mpeg2 file, everithing seems work fine, but... if i import this mpeg2 file in