Webi formula: Create sum with where clause on measure

Hi,
I am trying to create a sum of all values in a table which are greater than a specific threshold. Maybe someone can help me here. I haven't figured whether and how this is possible.
Here is a simple example:
Dimension
Measure
A
12
B
8
C
25
D
3
E
11
I would like to sum up all values that are greater than 10. So I would have 12 + 25 + 11 = 48.
The formula I tried in WebI was:
=Sum([Measure]) Where ([Measure] >= 10)
The formula is validated with no errors, but the result gives me the grand total ignoring the where clause.
In this example, that would be 12 + 8 + 25 + 3 + 11 = 59.
Any idea, how to achieve a formula like the above?
Thanks and regards,
Stefan

Hi Stefan,
Write a formula
=Sum([Measure]) Where ([Measure] >= 10 in ([Dimension ]))
Ex:
Below report have currency and their amount
wrote a formula
=Sum([Current Amount Bal]) Where ([Current Amount Bal] > 10,000 In ([Currency]))
Regards,
Mahi

Similar Messages

Creating LOV with Where clause

I'm trying to create a list of values from a select statementsomething like this
select customer_name, customer_number from customer
where Region = 'WEST';
I'm able to create a list of values of all the customers and numbers, but I could not
create a lov for a specific subset of that data, such as in the where clause.
Is it possible to create a LOV with a where clause?

Use bind variables to accept the region parameter. Also, it is good practice to accept a null parameter value. If your parameter is null, display the entire list of values. Your query would look something like this:
select customer_name, customer_number from customer
where Region = :region_name or
:region_name is null;
Regards,
Jay Mason

Export (expdp) with where clause

Hello Gurus,
I am trying to export with where clause. I am getting below error.
Here is my export command.
expdp "'/ as sysdba'" tables = USER1.TABLE1 directory=DATA_PUMP dumpfile=TABLE1.dmp logfile=TABLE1.log query= “USER1.TABLE1:where auditdate>'01-JAN-10'” Here is error
[keeth]DB1 /oracle/data_15/db1> DATA_PUMP dumpfile=TABLE1.dmp logfile=TABLE1.log query= USER1.TABLE1:where auditdate>'01-JAN-10' <
Export: Release 11.2.0.3.0 - Production on Tue Mar 26 03:03:26 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYS"."SYS_EXPORT_TABLE_03": "/******** AS SYSDBA" tables=USER1.TABLE1 directory=DATA_PUMP dumpfile=TABLE1.dmp logfile=TABLE1.log query= USER1.TABLE1:where auditdate
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 386 MB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/TRIGGER
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-31693: Table data object "USER1"."TABLE1" failed to load/unload and is being skipped due to error:
ORA-00933: SQL command not properly ended
Master table "SYS"."SYS_EXPORT_TABLE_03" successfully loaded/unloaded
Dump file set for SYS.SYS_EXPORT_TABLE_03 is:
/oracle/data_15/db1/TABLE1.dmp
Job "SYS"."SYS_EXPORT_TABLE_03" completed with 1 error(s) at 03:03:58Version
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production

Hello,
You should use parameter file.Another question i can see you are using 11g.Why don't you use data pump?.
Data Pump is faster and have more features and enhancement than regular imp and exp.
You can do the following:
sqlplus / as sysdba
Create directory DPUMP_DIR3 for 'Type here your os path that you want to export to';then touch a file:
touch par.txt
In this file type the following the following :
tables=schema.table_name
dumpfile=yourdump.dmp
DIRECTORY=DPUMP_DIR3
logfile=Your_logfile.log
QUERY =abs.texp:"where hiredate>'01-JAN-13' "then do the following
expdp username/password parfile='par.txt'
If you will import from Oracle 11g to version 10g then you have to addthe parameter "version=10" to the parameter file above
BR
Mohamed ELAzab
http://mohamedelazab.blogspot.com/

Outer Join with Where Clause in LTS

HI all,
I have a requirement like this in ANSI SQL:
select p1.product_id, p1.product_name, p2.product_group
from product p1 left outer join product_group p2 on p1.product_id = p2.product_id
and p2.product_group = 'NEW'
In Regular SQL:
select p1.product_id, p1.product_name, p2.product_group
from product p1, product_group p2
WHERE p1.product_id *= p2.product_id and p2.product_group = 'NEW'
In OBIEE, I am using a left outer join between these two in Logical table Source, and also, Gave
p2.product_group = 'NEW' in WHERE clause of LTS.
This doesn't seem to solve purpose.
Do you have any idea how to convert WHERE clause in physical query that OBIEE is generating to something like
product p1 left outer join product_group p2 on p1.product_id = p2.product_id AND p2.product_group = 'NEW'
I am using Version 10.1.3.4.1
Creating an Opaque view would be my last option though.

Hello
I have read your post and the responses as well. and I understand that you have issues with the Outer Join with where Clause in LTS.
Try this solution which worked for me (using your example ) -
1. In the Physical Layer created a Complex join between PRODUCT and PRODUCT_GROUP tables and use this join relationship :
PRODUCT.PROD_ID = PRODUCT_GROUP.PROD_ID AND PRODUCT_GROUP.GROUP_NAME = 'MECHANICAL'
2. In the General Tab of PRODUCT table LTS add PRODUCT_GROUP table and select Join Type as Left Outer Join.
3. Check Consistency and make sure there are no errors .
when you run a request you should see the following query generated -
select distinct T26908.PROD_ID as c1,
     T26908.PROD_NAME as c2,
     T26912.GROUP_NAME as c3
from
     PRODUCT T26908 left outer join PRODUCT_GROUP T26912 On T26908.PROD_ID = T26912.PROD_ID and T26912.GROUP_NAME = 'MECHANICAL'
order by c1, c2, c3
Hope this works for you. If it does please mark this response as 'Correct' .
Good Luck.

Merge with where clause after matched and unmatched

Hai,
Can anybody give me one example of merge statement with
where clause after matched condition and after the unmatched condition.
MERGE INTO V1 VV1
USING (SELECT     A.CNO XXCNO, A.SUNITS XXSU, A.DDATE XXDD, XX.SUM_UNITS SUMMED
FROM V1 A,
(SELECT
SUM(SUNITS) SUM_UNITS FROM V1 B
GROUP BY CNO) c
WHERE
A.DDATE=0 AND A.SUNITS <>0 AND
A.ROWID=(SELECT MAX(ROWID) FROM V1 )) XX
ON (1=1)
WHEN MATCHED THEN UPDATE SET
VV1.SUNITS=XX.SUMMED
WHERE XX.XXDD=0
WHEN NOT MATCHED THEN INSERT
(VV1.CNO, VV1.SUNITS, VV1.SUNITS)
VALUES (XX.XXCNO, XX.XXSU, XX.XXDD)
WHERE XX.XXDD<>0
i am getting the error
WHERE XX.XXDD=0
ERROR at line 13:
ORA-00905: missing keyword
Thanks,
Pal

One of the example is there:
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10759/statements_9016.htm#sthref7014
What Oracle version do you use ?
Besides the condition (1=1) is non-deterministic,
I would expect there an exception like "unable to get a stable set of rows".
Rgds.

JSP, Data Web Bean, BC4J: Setting the where clause of a View Object at run time

Hi,
I am trying to develop a data web bean in which the where clause of a View Object will be set at run time and the results of the query then displayed.
My BC4J components are located in one project while the coding for the data web bean is in another project. I used the following code bu t it does not work. Could you please let me know what I am doing wrong?
public void populateOSTable(int P_EmpId)
String m_whereString = "EmpView.EMP_ID = " + P_EmpId;
String m_OrderBy = "EmpView.EMP_NAME";
oracle.jbo.ApplicationModule appModule = null;
ViewObject vo = appModule.findApplicationModule("EMPBC.EMPAppModule").findViewObject("EMPBC.EMPView");
vo.setWhereClause(m_whereString);
vo.setOrderByClause(m_OrderBy);
vo.executeQuery();
vo.next();
String empName numAttrs = vo.getAttribute(EmpName);
System.out.println(empName);
Thanks.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JDev Team (Laura):
Here is how I have usually done mine:
1. In the JSP, use a RowsetNavigator bean to set the where clause and execute the query.
2. Use a custom web bean to process the results of the query (print to HTML).
for example:
<jsp:useBean class="oracle.jbo.html.databeans.RowsetNavigator" id="rsn" scope="request" >
<%
// get the parameter from the find form
String p = request.getParameter("p");
String s = request.getParameter("s");
// store the information for reference later
session.putValue("p", p);
session.putValue("s", s);
// initialize the app module and view object
rsn.initialize(application,session, request,response,out,"wt_bc_WT_bcModule.wtjoinView");
// set the where clause string
String theclause = "presname = '" + p + "' AND slideno=" + s;
// set the where clause for the VO
rsn.getRowSet().getViewObject().setWhereClause(theclause);
rsn.getRowSet().getViewObject().executeQuery();
rsn.getRowSet().first();
%>
</jsp:useBean>
<jsp:useBean class="wt_bc.walkthruBean" id="wtb" scope="request" >
<%
// initialize the app module and VO
wtb.initialize(application,session, request,response,out,"wt_bc_WT_bcModule.wtjoinView");
wtb.render();
%>
In this case, the render method of my custom web bean mostly gets some session variables, and prints various content depending on the session variable values.
Hope this helps.
</jsp:useBean><HR></BLOCKQUOTE>
Laura can you give the code of your walkthru bean? i wna't to initialize a viewobject, set the where clause and give that viewobject back to initialize my navigatorbar.
Nathalie
null

Insert with Where Clause

Hi,
Can we write Insert with 'Where' clause? I'm looking for something similar to the below one (which is giving me an error)
insert into PS_AUDIT_OUT (AUDIT_ID, EMPLID, RECNAME, FIELDNAME, MATCHVAL, ERRORMSG)
Values ('1','10000139','NAMES','FIRST_NAME',';','')
Where AUDIT_ID IN
( select AUDIT_ID from PS_AUDIT_FLD where AUDIT_ID ='1' and RECNAME ='NAMES'
AND FIELDNAME = 'FIRST_NAME' AND MATCHVAL = ';' );
Thanks
Durai

It is not clear what are you trying to do, but it looks like:
insert
into PS_AUDIT_OUT(
                    AUDIT_ID,
                    EMPLID,
                    RECNAME,
                    FIELDNAME,
                    MATCHVAL,
                    ERRORMSG
select '1',
        '10000139',
        'NAMES',
        'FIRST_NAME',
from PS_AUDIT_FLD
where AUDIT_ID = '1'
    and RECNAME ='NAMES'
    and FIELDNAME = 'FIRST_NAME'
    and MATCHVAL = ';'
SY.

Hierarchical query with where clause

Hi,
How can I query hierarchically a query with WHERE clause? I have a table with three fields session_id,id and root_id.
When I try with the following query,
select id, level from relation
where session_id = 79977
connect by prior id = root_id start with id = 5042;
It gets duplicate values.
I want the query to show in the hierarchical manner with a filter condition using WHERE clause. Please help me how can I achieve this. If you know any link that describes more about this, please send it.
Thanks in Advance.
Regards,
-Parmy

Hi Sridhar Murthy an others,
Thanks a lot for your/the answer. It's working for me. It saved a lot of other work around without the proper knowledge of hierarchical query. Please send me any link that describes these issues in detail and also I hope as I have mentioned in the other message, same cannot be achieved on views or ( on two different tables ???)
Any way thanks for your reply,
It's working for me.
With happiness,
-Parmy

Sum in where clause

can i use sum in where clause
eg
select from table_name id_klient,name,lastname,sum(number_of_products)
from Klients k,Sales s
where k.id_klient=s.id_klient
and sum(number_of_products)>100

or
select a.id_klient,
       a.name,
       a.lastname,
       a.tot_prod
from (select id_klient,
               name,
               lastname,
               sum(number_of_products) tot_prod
          from Klients k,
               Sales   s
         where k.id_klient = s.id_klient
         group by id_klient, name, last_name) a
where a.tot_prod > 100note: untested

Populate list by executing query with where clause

Hi,
I m populating my list from database table using following command.
EntityManagerFactory emf = Persistence.createEntityManagerFactory("learning", new HashMap());
EntityManager em = emf.createEntityManager();
String query = "select d from Dept d";
List list = em.createQuery(query).getResultList();
My list is getting populated with all of rows in my database table(dept). The problem is, I cant use where clause in my query string.
String query = "select d from Dept d where d.dept_name='ANYNAME'";
Moreover I cant select even indivisual columns by using following line
String query = "select d.dept_code,d.dept_name from Dept d";
It looks like that my query is getting all rows from table as Object.
What to do to
1. put some where clause
2. get some particular colums instead of all columns
3. apply some table joins in query
plz help.

Hi Alex,
I misunderstood your question. You had mentioned "My list is getting populated with all of rows in my database table(dept). The problem is, I cant use where clause in my query string. "
I thought you might not have permissions to modify the code in the class, and that's why I suggested that you could write new classes.
1) write new classes,? means if I need just two columns from a table >(instead of all columns), do I need to write new class with just two >columns (getters and setters)?You can write a SQL statement anyway you want , there are no restrictions in JDBC , so if you need just 2 columns you can write a custom query for that.
"select column1 as a, column2 as be from table_name where column3 = xyz" etc.
2) Is not anyway to write SQL statement like
select dept_code,dept_name from dept where dept_name='anything'The above SQL is correct, it should work.
3) Stored procedures? can I get some example(code) to get an idea >how to implement complex queries with where clause and joinings >using stored procedures?Stored procedures are specific to the database you are using, Oracle has a particular syntax for store procdures.
You can call stored procedures from JDBC also, search on Google for
"Calling stored procedures from JDBC"
4) I m using hibernate. can I get any example of using hibernate own >query?Tutorial on Hibernate Query Language:
http://www.hibernate.org/hib_docs/v3/reference/en/html/queryhql.html

Summary column with where clause

Hi all,
I'm using Oracle Report Builder 10GR2. I have the following issue: In one of the query i have the following result :
Suppliers     0
Suppliers     1408
Total in BGN     1408
Customers      6024
Customers      11779.32
Customers
Total in BGN     11779.32
Taxes      0
Taxes      0
Total in BGN     0
Cash      1363.85
Cash      691
Cash      991.23
Cash      688
Total in BGN     2355.08I want to make a sum for these columns where corresponds to description " Total in BGN" . Maybe it is a simple task... Do i have a chance to select from a query in a Report Builder?
If yes, pls specify? Or maybe there is a chance to add a where clause for summary column. But keep in mind that this is one of the queries in the report builder and i have to add summary with this conditions. I cannot change the existing query but probably add a new one.
Any ideas?
DB Version: 11g
Thanks in advance,
Bahchevanov.
Edited by: bahchevanov on Sep 29, 2012 2:21 AM

Hello,
You should use parameter file.Another question i can see you are using 11g.Why don't you use data pump?.
Data Pump is faster and have more features and enhancement than regular imp and exp.
You can do the following:
sqlplus / as sysdba
Create directory DPUMP_DIR3 for 'Type here your os path that you want to export to';then touch a file:
touch par.txt
In this file type the following the following :
tables=schema.table_name
dumpfile=yourdump.dmp
DIRECTORY=DPUMP_DIR3
logfile=Your_logfile.log
QUERY =abs.texp:"where hiredate>'01-JAN-13' "then do the following
expdp username/password parfile='par.txt'
If you will import from Oracle 11g to version 10g then you have to addthe parameter "version=10" to the parameter file above
BR
Mohamed ELAzab
http://mohamedelazab.blogspot.com/

Prob. with where clause with rownum

hi
i have a table with the following columns
SQL> desc mark
Name Null? Type
STUDENTCODE NUMBER(3)
MARK1 NUMBER(2)
MARK2 NUMBER(3)
and here are the rows in it
SQL> select * from mark ;
STUDENTCODE MARK1 MARK2
1 20 40
2 70 80
3 80 90
4 90 99
12 13 35
5 90 80
6 78 87
i wanna sum mark1 and mark2 and list down the rows with the top 2 rows
i tried to first list down all the rows in the order of sum with the following stat.
SQL> select studentcode,mark1+mark2 from mark order by mark1+mark2 desc
STUDENTCODE MARK1+MARK2
4 189
3 170
5 170
6 165
2 150
1 60
12 48
it worked fine. but i used a where clause to get the first 2 rows and here is what i got.
SQL> select studentcode,mark1+mark2 from mark where rownum < 3 order by (mark1+mark2) desc
STUDENTCODE MARK1+MARK2
3 170
2 150
1 60
as You can see, i don't get the req. result.
how do i get the prob. solved ?

For Oracle versions prior to 8.1.5, you will have to create a view and then incorporate that view into your select statement.
create or replace view my_view
is
select studentcode, mark1 + mark2
from mark
order by mark1 + mark2 desc;
select *
from my_view
where rownum <= 2

Readonly table with where clause value from previous page

Hi
I am using jdeveloper 10.1.3.
I have a globalhome page where the user enteres a reference number. i have a backing bean for the globalhome page that runs a method to run an sql that seraches for this reference number, if the reference number exsits the user is directed to a detail page.
this detail page should display details of this reference number.
i have set up a read only table to display this data based on a view object with a bind varaible in the where clause.
however i am unsure how to set this bind varaible value to the reference entered in the first globalhome page.
please can anyone advise how to do this.
regards

Hi,
You can follow following steps to achieve this
1) Write a custom method in your Application module like
public void executeMyVO(String bindVarValue)
MyVOImpl vo= getMyVo();
vo.setNamedWhereClauseParam(<bind variable name decalred in VO>,bindVarValue);
vo.execute();
2) Expose the above method to client. (Right click AM-->Client-->Shift method from left to right)
3) In the pagedef of globalhome page, create a method action for the aboce created custom method
4) execute the method action from your backing bean after you run an sql that seraches for this reference number.
Hope this help.
Vikram

Problems with WHERE CLAUSE in selects executed by BAPIs

Dear Experts,
I'm trying to make a SAP Java Connector. My problem is that, when they are called by Java, BAPI functions don't run in the same manner as in SAP testing mode .
I tested two BAPI functions called through my connector and I saw with the debbuger that BAPI functions don't execute the select and loop at with a WHERE clause when they are called by Java, therefore they throw errors. But in the SAP testing mode functions work just fine.
I'm new to SAP and I don't know why this happens. Would you like to explain to me how to fix this problem?
Thank you very much.
Kind regards,
Maricica

979380 wrote:
Yeah,i m sorry.I m a forum newbie.All right,we ve been given an oracle account for the purpose of this project,an we have connect to the oracle database either via linux terminal with sqlplus,or via oracle client and plsql.So i have to create some tables,then fill these tables with tuples(we ve been given fixed .sql files to do that),and we re suggested to do that from the linux terminal.I did that successfully.Then we have to run some queries either in terminal or plsql.I chose plsql.I connect,i can see the tables that i have created but when i run(in both sql and terminal window) for example the query "select * from table_1",i take 0 rows as a result.I tested to run the query from terminal(with sqlplus) to see if the tables are really empty,but i recieve the results as i should.
I am sorry for my chaotic writing but i cant even explain the problem to myself better and i m not a native.
(im using oracle version 11.2.0.1, this is the first time i m using oracle databases and i m a rookie in databases in general)
Edited by: 979380 on 1 Ιαν 2013 10:33 πμ
[oracle@localhost ~]$ sqlplus user1/user1
SQL*Plus: Release 11.2.0.2.0 Production on Tue Jan 1 11:19:29 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> create table table_1 (id number);
Table created.
SQL> select * from table_1;
no rows selected
SQL> insert into table_1 values(1);
1 row created.
SQL> select * from table_1;
ID
1
SQL> in order to SELECT any rows from any table, first you must INSERT data into the table!
is COPY & PASTE broken for you?

Howto use jsp with where-clause restriction for viewObject

hello there,
i am currently trying to figure out how to pass parameters via url to the jsp,
so that the corresponding viewobjects where clause can be extended and i only get the select-results that i want. i am familiar with doing this in a stright java-environment but don't know how to implement it in a jsp-client.
does anyone know something about this or can name me a ressource i can read about that.
Thanx
Selim Keser

thank you, but i have only 19 days left for
my diploma and nobody in this company can help me with this issue.
what i need is an example or something like a reciept about what to do
to achieve the following:
I want to type in an url like:
localhost:8080/myapp/browse.jsp?customerid=123
so that i can extend the where-clause in my ViewObject
and only see the rows of customer 123 in my jsp.
it is a bit hard for a newbie to figure out how to pass down the parameters way down to the ViewObject. I am shure that this is easy to do once one understands the how it works. This is my first "Web-Experience" and I am running out of time.
Thanx
Selim Keser

Webi formula: Create sum with where clause on measure

Similar Messages

Maybe you are looking for