WebI integrated with the local corporate portal

Hi All,
I have a requirement to integrate SAP BO WebI with corporate portal of the company client.
I just provide the CUID of each report and have configured the SAP SSO? or should I worry about anything else?
Thanks

Hello Angelo,
With SAP Portal, SAP provides the integration options I have mentioned.
When it comes to a third party portal, If its fine to open your webi report in a new window upon clicking the link or button, Whatever you are having is fine. Since you have SSO implemented, I believe that a click on document link will launch the particular report without asking for any credentials. Then you can include the report link as a button in local portal and report will be opening in a new window.
If you need to view your report as part of local portal web page(not as a link, but a part of web page), I believe more complex things are involved. You will have to use java or .NET SDKs to embed report into the particular local portal.
hope it helps
Best Regards,
Nikhil Joy

Similar Messages

  • Integrating a Java web application into the SAP NetWeaver Portal

    Hello experts,
    We have a requirement to integrate a Java based web application into the SAP NetWeaver Portal using iView/iFrame technology. The Java based web application is completely independent from the SAP environment but should be displayed as part of the SAP Portal environment. The other requirement is the main navigation menu for the Java based web application should be configured and provided in the SAP Portal.
    Any pointers on how exactly this can be done would be of great help.
    Also how can the SSO (Single-Sign-On) to the Java application be implemented so that the user can logon to the java application through the portal without providing the user credentials again.
    Thanks in advance.

    Hi,
    I think you can use URL iviews to integrate your java web application with EP. you have the option of doing SSO with the application as well.
    Have a look at the sap help material
    http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb51730e6a11d7b84900047582c9f7/frameset.htm
    http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateURLiviewintotheSAPEP+portal
    Regards,
    Ganesh N

  • SiteMinder integration with the internal and external facing portals

    Hi ,
    We are in development phase for SiteMinder integration with the internal and external facing portals.The proposed dual authentication scheme which requires both SiteMinder for External facing portal (EFP) and LDAP for Internal portal .is it possible?
    and is it possible to main to diff LDAP directories one is external users and one is for internal users.?
    If you maintain  2 diff(external & internal) LDAP Directories in Siteminder Policy Server  what about  external users which are  not exit in portal data source .
    I appreciate if anyone  can help me for my above query .
    Regards
    Tag

    Hey Tag,
    We do have a physical external Portal and a physical internal portal.  The both the external and internal are connected to 2 LDAP directories.
    For example the External Portal is connected to the Employee LDAP Direcotry and the Customer LDAP Directory.  The Internal Portal is connected to the US Employee LDAP Direcotry and the EMEA LDAP Directory.
    So each one of them is connected to 2 different LDAP Directories.
    I believe that the Siteminder Policy is setup such that the Internal portal has a policy and the External portal has a seperate policy on the same Siteminder Server.  Then each of the Policies is configured to connect to the approiate LDAP Directories.
    You have to maintain the LDAP Directory information in both the portal and Siteminder Policy Server.  It is required in the policy server so that it can authenticate the user and it is required in the Portal server so that it can authorize the user and display content based on thier assigned roles.
    Hope that helps.
    Regards,
    Keith

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • How to get the path of the web-archive on the local filesystem?? [Apache]

    Hello all,
    Im running a webapplication on a tomcat server.
    I need to find out the path of the web-archive on the local filesystem to access several files.
    How can I do that with out having an instance of HttpRequest or whatever??

    Hello Bruce.
    Please take a look at the following KBase article.  It has a sample that will retrieve the folder structure for a specified Crystal Report template based on the instance name in the file store.  The sample there can be easily modified so that it is based on a specific infoObject id.
    1549728 - How to find the folder structure in the CMC of a report template based on the instance file name in the output file store.
    The KBase can be retrieve from the following link:
    https://bosap-support.wdf.sap.corp/sap/support/notes/1549728
    Please note that the KBase article is retrieved through the Service MarketPlace.
    I hope this helps.
    Regards.
    - Robert

  • Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

    I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
    It does the same thing when using msi with the command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    Here is my setup.ini file
    [Startup]
    RequireOS=Windows XP
    RequireMSI=3.1
    RequireIE=7.0.0000.0
    Require64BitVC10RT=1
    CmdLine=/spb /rs /sl"1036"
    [Product]
    msi=AcroPro.msi
    vcrtMsi=vc_red.msi
    vcrtDir=VC10RT_x64
    Languages=1033;1036
    2052=Chinese Simplified
    1028=Chinese Traditional
    1029=Czech
    1030=Danish
    1043=Dutch (Netherlands)
    1033=English (United States)
    1035=Finnish
    1036=French (France)
    1031=German (Germany)
    1038=Hungarian
    1040=Italian (Italy)
    1041=Japanese
    1042=Korean
    1044=Norwegian (Bokmal)
    1045=Polish
    1046=Portuguese (Brazil)
    1049=Russian
    1051=Slovak
    1060=Slovenian
    1034=Spanish (Traditional Sort)
    1053=Swedish
    1055=Turkish
    1058=Ukrainian
    1025=English with Arabic support
    1037=English with Hebrew support
    6156=French (Morocco)
    CmdLine=TRANSFORMS="AcroPro.mst"
    [Windows XP]
    PlatformID=2
    MajorVersion=5
    MinorVersion=1
    ServicePackMajor=3
    [MSI Updater]
    Path=WindowsInstaller-KB893803-v2-x86.exe
    I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
    Does it means that the serial number provided was invalid for deploying ?
    NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that.  For now it's only not working at the command line.
    Another important point is that the install works great without customization !  If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
    So what goes wrong ?

    Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
    I retried installing the initial package in French on a Windows 7 English and the software installed properly in French. 
    As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
    Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
    That gave me the cue I needed to know.  I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
    I ran again the same command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    And everything works fine.
    NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first.  Otherwise the installation failed without any error message.
    Thanks again to you for your good hint,
    Bob

  • SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

    I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
    I am trying to install Acrobat XI Std silently by SCCM.
    I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
    I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
    Is there a way to check the language specified for ym serial number?
    Bryndon

    Update on a couple of details:
    @Sabian,
    Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
    @Sebastian
    I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
    The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

  • How to keep data integrity with the two business service in OSB 10.3.1.0

    How to keep data integrity with the two business service in OSB 10.3.1.0
    In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
    Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

    Can you please explain what you meant my data integrity in your use case?
    Manoj

  • Deploy a web service with the deploy tool (J2EE)

    Hi!
    I want to deploy a web service with the Deploy Tool (J2EE 1.4).
    (For info, I'm working on Win 2000.)
    I have the following error when I'm trying to deploy:
    distribute: C:\monHello2\monApp.ear
    Deploy action running...
    Deployment failed on target localhost:4848_server : Fatal Error from EJB Compiler -- jaxrpc compilation exception
    !!! Operation Failed !!!
    Someone can help me, please? What's the problem?
    Other question: when I create the WAR file, I have to add : my interface class, my implementation class, my others java classes, my WSDL file and my mapping.xml file.
    Should I add the .jar that is used by one of my class???? I think yes, but...
    thank you and excuse me for my english... ;o)

    Only primitive types can be returned? Is thatcorrect????
    true - for more details check out section 3.4.1.3 of
    this book which is available for purchase or online
    http://java.sun.com/blueprints/guidelines/designing_w
    ebservices/I meant to say primitive type and "special POJOs" called "JAXRPC Value Types" - check out the reference I listed

  • Hi, I have a CS6 design and web premium with the product number. I need the serial number to activate my product. Where can I get it please?

    Hi, I have a CS6 design and web premium with the product number. I need the serial number to activate my product. Where can I get it please?

    Yes i did! with the prrof of the payment etc...
    Kind regards
    Meilleurs salutations
    Mit freundlichen Grüssen
    De Oliveira Claudia
    2014-11-21 16:21 GMT+01:00 Beverley Gray <[email protected]>:
        Hi, I have a CS6 design and web premium with the product number. I
    need the serial number to activate my product. Where can I get it please?
    created by Beverley Gray <https://forums.adobe.com/people/Beverley+Gray>
    in Downloading, Installing, Setting Up - View the full discussion
    <https://forums.adobe.com/message/6951051#6951051>

  • Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

    Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

    You haven't enabled VoLTE (Advanced calling) have you?  Not that it makes a difference just curious. 
    Have you upgraded to Lollipop yet?
    Could be hardware or SIM card issue, read through this thread:
    I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

  • How to view Picasa web albums with the new Apple TV

    Apple TV 2010
    Is there a way to view (stream) Picasa web albums with the new Apple TV? Thanks, IM

    ljwsin wrote:
    will there be a chance that picasa web will be supported in future IOS update to apple TV?
    no-one here will know, but seeing as apple and google aren't exactly best of buds at the moment i can't see it happening.

  • HT1937 I am from india and am studying in USA but i am done with my course and going back to india and i have ordered for an unlocked  T-Mobile .....So will it work in india with the local carriers?

    I am from india and am studying in USA but i am done with my course and going back to india and i have ordered for an unlocked  T-Mobile phone.....So will it work in india with the local carriers or will i have to go to T-mobile or apple store to get it unlocked?

    If purchased from Apple, it will be officially unlocked & will work in India. Be aware, your warranty/support will only be valid in the US, & the phone will only support LTE in North America.

  • I am planning to buy ipad 2 wifi   3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

    I am planning to buy ipad 2 wifi   3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

    I'm fairly sure the Verizon CDMA iPad 2 had no GSM sim slot. So it won't work with any other carrier except Verizon.
    As far as the AT&T version goes, it should technically work but will not support 4G/LTE cellular bands.
    Given iPad 2's are no longer being sold, I doubt any  that could be bought would have a warranty still. Or have at most very little of it left.
    Why an iPad 2?  its now 3 generations behind the current one.
    Perhaps an iPad 4 would be a better choice.

  • Why will safari not load web pages with the prefix "fhp"?

    Why will safari not load web pages with the prefix "fhp"?

    Because it doesn't recognise them as valid addresses - just as the error message  says.
    Firefox is similar : Firefox doesn't know how to open this address, because the protocol (fhp) isn't associated with any program.
    Where are you seeing this problem ?.

Maybe you are looking for

  • How do I  add an email account on an iPhone 4  ?

    I am having trouble adding an account. I receive an error message saying my ID, password are invalid for "popmail" My version is 4.0.2

  • Running a java program in RedHat 7.3

    Ok, this is probably a no brainer...I am not new to Java - but I am used to using editors such as JBuilder or Kawa on Windows OS's. In my current situation, I am running RedHat 7.3. I installed J2SDK 1.4.1 and after MANY hurdles everything is fine in

  • Error in adding Sales Order

    Hello Experts, I have created a addon through which in Sales Order while entering the quantity and then pressing tab in qty column automatic Batch allocation is done row wise for items . This process is working fine while entering . But from last two

  • GL Revaluation and reversal

    Hi all I need a solution to the following problem: 1. User did a reval on G/L account for August at month end, and the reversal for July was done 1st August. - no problem with that. 2. User did a reval for September at end of Sept for September, but

  • File lock in real time job

    Hi All, I encountered an file lock error when creating a real time job. After a dataflow, I have a script to move the processed file to archive folder. (e.g. move c:\source\order.xml c:\archive). When I test run it, I received a 50306 error. It saids