Webi open last instance

Hi experts,
I have a BO 4.0 SP7
It's posible to view the last instance of webintelligence with a simple clic on the list of documents.
I know it's posible view the last instance through this window:

what is the version of the sap bi app for ipad? this is possible in 5.0.2+ version.
-Nikhil Nair

Similar Messages

Is there any version of Indesign that allows to open multiple instance at the same time

I am using Indesign CS3 to generate the bulk reports automatically(programmatically) using Adobe indesign library . One of the key limitation to this tool is it allows to open only one instance at a time unlike word where multiple instances can be opened at the same time. Is there any adobe indesign too version desktop/server which allows to open multiple instances at the same time. Any help on is appreciated. Thanks.

@PeterG
You said "You might want to examine the End User Licensing Agreement (EULA) for any prohibition against using these two instances at the same time with the same license; the license does permit two installs for the same user that are not used simultaneously." I thought that meant you had read the EULA. It's pretty unambiguous on that point.
For everyone's edification about multiple installations and server use with a standard license here's the relevant text:
2. Software License.
If you obtained the Software and any required serial number(s) from Adobe or one of its authorized
licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive
license to install and use the Software in a manner consistent with its design and Documentation and as
further set forth below. See Section 16 for specific provisions related to the use of certain products and
components, for example font software, Acrobat, After Effects, Adobe Presenter, Contribute, Adobe
Device Central, Flash Player, Flash Builder, and Adobe Runtimes.
2.1 Limited Use. The Software, or portions of the Software, may allow installation and use without a serial
number. If so, you may install but not use such non-serialized Software on any number of Computers as
part of an organizational deployment plan. Further, you may install and use such non-serialized Software
on any number of Computers for demonstration, evaluation and training purposes only and only if any
Output Files or other materials produced through such use are used only for internal, non-commercial and
non-production purposes. You may not use such non-serialized Software after any applicable time-out
period has ended, unless you input a valid serial number under Section 2.2. ACCESS TO AND USE OF
ANY OUTPUT FILES CREATED WITH SUCH NON-SERIALIZED SOFTWARE IS ENTIRELY AT
YOUR OWN RISK.
2.2 General Use. You may install and use one copy of the Software only on the Permitted Number of your
compatible Computers into which you enter a valid serial number.
2.3 Distribution from Server. You may copy an image of the Software onto Computer file server(s) within
your Internal Network for the purpose of downloading and installing the Software onto Computers within
the same Internal Network for use as permitted by Section 2.1 and 2.2.
2.4 Server Use. You may install the Software on Computer file server(s) within your Internal Network only
for use of the Software initiated by an individual from a Computer within the same Internal Network only
as permitted by Section 2.2. The total number of users (not the concurrent number of users) able to use the
Software on such Computer file server(s) may not exceed the Permitted Number.
By way of example, the foregoing does not permit you to install or access (either directly or through
commands, data or instructions) the Software: (a) from or to a Computer not part of your Internal Network,
(b) for enabling Web hosted workgroups or services available to the public, (c) by any individual or entity
to use, download, copy or otherwise benefit from the functionality of the Software unless licensed to do so
by Adobe, (d) as a component of a system, workflow or service accessible by more than the Permitted
Number of users, or (e) for operations not initiated by an individual user (e.g., automated server
processing).
2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
install a second copy of the Software for his or her exclusive use on either a portable Computer or a
Computer located at his or her home, provided that the Software on the portable or home Computer is not
used at the same time as the Software on the primary Computer.
2.6 Restrictions on Secondary Use by Volume Licensees. If the Software was obtained under an Adobe
volume license program (currently known as Adobe Open Options) by any licensee other than an
educational volume licensee, the second copy of the Software made under Section 2.5 must be used solely
for the benefit and business of that volume licensee. For more information about secondary use by volume
licensees, please visit our Web Site at http://www.adobe.com/go/open_options.
There is also language stating that if you have a dual boot or other system capable of running more than one OS you will need a separate license for each platform if you want to run the software on more than one.

FF opens 19 instances, but loses tabs

Firefox is operating strangely. I recently updated to 5.0.
Now, I use FF with several add-ons, including Too Many Tabs. When I closed FF last night, there were 5 tabs, plus a total of 31 tabs in 7 TMT toolbars. I closed FF normally.
When I ran FF this morning, it opened 19 instances of Firefox. All of them had all the TMT stuff, but opened with a New Tab only -- that is, the 5 tabs that I had were lost.
I think that this is a FF 5 problem, as this happens every day, and I didn't have this problem before, but I don't remember when it started.
Can I go back to FF 4 series? Where can I get it? Will I still have all my TMT tabs?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups and all open tabs to get lost, so you will have to create them again (make a note or bookmark them).
See:
* http://kb.mozillazine.org/Session_Restore

View last instance Reports Webintelligence with KM

Hi, experts
I have webintelligence reports that are integrated with BO KM by OpenDocument and I need to open the last instance for each report. I checked the Document "Xi3-1_url_reporting_opendocument_en" and I need to implement the parameter sInstance=Last.
Within the opendoc URL in KM/System Configuration (BusinessObjectsKM.par) is the call only OpenDocument.jsp without parameters. I don´t know where add this parameter. Other parameter, IDocID already exists and is dynamically generated for each report.
Please advise how and where I can implement this parameter

Hi Stratus,
In "System Configuration" of KM the original link is in this way
.../OpenDocument/opendoc/openDocument.jsp
In the SAP portal to run the report shows the link:
.../OpenDocument/opendoc/openDocument.jsp?iDocID=24154&ses=3% 3DLQ05% 2635% 2663% 2C8P% 3DsecSAPR3% 2C8P% 264F% 3D1805% 2C8P% 264E% 3D25346JEnWPM8OjcAc7zh0% 2C8P% 261% 2C8P% 263k% 3D% 40slqdbt-vbo02.liquigas.biz% 3A6400% 2C8P% 265U% 3D25347Jy6TFiEx497D0lwG25346JEnWPM8OjcAc7zh0% 2C8P% 26S5% 2C88% 26PA% 3Dpt_BR% 2C8P% 26Tm% 3D3650% 2C83% 262r% 3Dslqdbt-vbo02.liquigas.biz% 2C8P% 3A6400% 26lu% 3D2070% 2C83% 26Tn% 3D% 7B3% 26.2% 7B3% 3D% 26O% 3DPersonalCategory% 2C8P% 262% 3D1807% 2C83% 7D% 2C% 3FZ% 26.1% 7B3% 3D% 26O%% 3DFavoritesFolder 2C8P% 262% 3D1806% 2C83% 7D% 2C% 3FZ% 26.3% 7B3% 3D% 26O% 3DInbox% 2C8P% 262% 3D1808% 2C83% 7D% 2C% 3FZ% 26U% 3D3% 2C83% 7D% 2C% 3FZ% 26PP% 3D2070% 267R% 2C83% 2C83% 3D46110 & sap_sysid = BIQ & sap_client = 120 & 172.31.163.5:6400 = cms & lang = en & loc = en & pvl = en & IsApplication = true
I added the parameter that you showed:
.../OpenDocument/opendoc/openDocument.jsp?sInstance=Last
The result is below:
.../OpenDocument/opendoc/openDocument.jsp?sInstance=Last? iDocID=24154&ses =...
Should be somewhere else that incorporates this parameter

When I open last import and double click on a photo, a caution sign pops up. Any solutions?

When I open last import and double click on a photo, a caution sign pops up. Any solutions?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Open multiple instances for a VI

Dear all,
I created an application to open multiple instances(RecipeEditor.vi as attached)works fine in debug mode. But, after I build it to an exe, it gives me error 1003.
Can you please show me some pointer what is wrong?
Please find attached zipped package
Thank you in advance.
Regards,
Vincent
Attachments:
New folder.zip ‏1742 KB

my apology, Norbert.
I attached the wrong file. This attachment is password removed.
Thank you in advance
Attachments:
Recipe Editor.vi ‏286 KB

How do I prevent a user from opening multiple instances on the same computer?

On the site oldnavyweekly.com there is a .swf that prevents users from opening multiple instances of the site at the same time on the same computer. If you open the site, and try to open it a second time in another window, it won't load. You can't open the site again until the first window is closed. How did they implement this?
From my analysis it is NOT:
1. Cookies - The block still takes place if you try opening it in IE and also try opening it in Firefox simultaneously.
2. Flash Cookies - The block still takes place if I disable flash cookies.
3. IP Based Block - You are not blocked if you open the site on two separate computers with the same outbound IP address. From my analysis, their server does not assist in the block at all.
It seems as if their .swf is creating some kind of global system-wide object that can be detected in other instances of the application on the same machine. How did they implement this?
Thanks!

you're welcome.
actually, unless you take an extra step, the first opened swf will close. if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

Stop opening multiple instances of the same application

I am used to having graphic files on my desktop, when editing one I would simply right-click and pick "open with" > Photoshop (which is always open in its own desktop in my computer). Now out of the blue, if I do that, it loads another instance of Photoshop, which is certainly what I don't want. I can have 2, 3, 4 Photoshops running at the same time and editing the same image!
Any idea how to solve this? I searched but all I could find is people wanting the opposite i.e. opening multiple instances of the same app.

Your best bet to prevent this is to detach or unmount this drive; however, you can also try resetting your Mac's launch services, to have it re-scan only the Applications folders on your boot drive for programs to associate with documents and services you are using. Running the following command in the OS X Terminal will kill the current launch services database (its long, but copy and paste the entire line):
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill
Following this, run the following command to seed the database with the apps you currently have installed:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -seed
Note that these changes will only apply when opening documents that have not been specifically assigned to a program. If you find a specific document continues to open the program on the external drive, then you can get info on it and change the associated program in the "Open With" section of the info window. After doing this, you might need to re-run these commands above, as opening the program will register it with OS X's launch services and have it now be available for automatically handling other documents.

Opening multiple instances of the same vi

Hi,
I am having trouble opening multiple instances of the same vi.
This vi that I am trying to create can be used like a message display window to display numbers, strings etc (just like labVIEW's display message control except that this vi will update the displayed controls every scan). So for example, I will like to have a subvi, lets call it popup.vi, where I wire in three inputs from my main vi (2 strings and 1 number). Now in my main.vi I have 2 numeric controls Num1 and Num2 with their KeyFocus property nodes.
The intention is that when I select Num1 or Num2 numeric control with my mouse the KeyFocus boolean becomes true and the popup.vi logic kicks in. Meaning that the popup.vi runs and opens its front pane
l displaying the two strings and one numeric value from the main.vi.
The problem arises when I want to open and run multiple instances of the popup.vi.
So when I click on Num1 with my mouse I want the popup.vi to open its front panel with a set of strings and number displayed. At the same time I would want to click on Num2 control and open another instance of the popup.vi with another set of strings and numeric value.
Also, I saved the popup.vi as popup.vit but for some reason vi server will not open the popup.vit. I get a message that popup.vit is already in memory - cannot load.
I have attached a sample of the main.vi and popup.vi program.
Please let me know if you need further clarifications.
I appreciate your help in this matter.
Thanks
Nish
Attachments:
popupVI.zip ‏37 KB

You have to clone the VI. You say you have tried to use the .vit way of cloning...but in the example there is no use of VIT and the VI is called statically. If you want to open multiple instances of the same VI and the VI has a user interface (or needs to be a unique instance of the VI every time even though it's called the same place in the diagram, not the case here though) you need to do it dynamically, i.e. with an invoke node.
There is actually a problem doing just that, it causes a memory leak...but that won't be a problem unless the VI is called frequently / the software will be running over very long periods of time. You can see an example of it here (attached to my reply to the question):
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&
RPAGEID=135&HOID=506500000008000000A07D0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=VI+cloning&USEARCHCONTEXT_QUESTION_S=0
About the memory leak problem:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000B7A40000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=VI+cloning&USEARCHCONTEXT_QUESTION_S=0
MTO

How to identify the last instance of a dynamic table row

Hi all,
I am trying to figure out how to create an action for my form in Livecycle Designer ES2 that will affect the most recent instance of a dynamic table row. I have a table with a repeatable row where the user will enter information about a purchased part and I have buttons that allow the user to add and remove rows. I need to create an additional add row button that will add a new instance of the repeatable table row (this is not an issue) and will disable and change the background color of the first cell in the added row. The problem I am having is how to have an action that affects the last instance of a row.
If anyone knows how to do this in Javascript I would appreciate some advice/help.

Hi,
I think this is beyond what an action will provide. You will a have to write some JavaScript directly. When you call the addInstance method it returns the new row, so you can do something like;
var row = Table1._Row1.addInstance();
row.TextField1.border.fill.color.value = "255,0,0";
row.TextField1.access = "protected";
To find the last row and do the same thing you can do something like;
var row = Table1.resolveNode("Row1[" + (Table1._Row1.count - 1) + "]");
row.TextField1.border.fill.color.value = "255,0,0";
row.TextField1.access = "protected";
Regards
Bruce

How to open multiple instance of Adobe Live Cycle Designer ES 8.2

Hi,
How do I open multiple instance of Adobe Live Cycle Designer ES 8.2. I have two forms and I need to compare them. Another situation is I want to correct/copy the contents by keeping the old and new one under the view simultaneously. I also want to take advantage of multiple monitors
The MDI style windows with Ctl+Tab to switch between documents is not helping me in the context explained above
adobe Acrobat work on multi instance if I type acrobat.exe /n;
but if I type "C:\Program Files\Adobe\Acrobat 9.0\Designer 8.2\FormDesigner.exe" /n;, its just opening the existing livecycle instance
please help

I don't think you can run two instances.
But you can stretch the main application window across both monitors and tile the two documents inside the main window.

FEATURE REQUEST: Preference to "Open Last Document" on launch

Maybe nobody will hear this - and no action will be taken - but I had to chime in and say, could we PLEASE have the Pages app offer the option to "OPEN LAST DOCUMENT ON LAUNCH"?
Thanks!
The Abiding Dudester

Why not call it from
Apple Menu > Recent Items > Documents
Yvan KOENIG (from FRANCE samedi 13 septembre 2008 20:35:51)

After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up.

I am using MacBook Air with Yosemite OS. After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up. Could you please give me suggestions on how to fix this problem? Thank you

That's a bit vague, but you may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Direct URL link to "Last Instance" on XI 3.0

I am looking for getting direct URL to "Last Instance" of a Desktop Intelligenge Report on XI 3.0.
An idea ?

this is all about openDocument API
i think thats wat you need
http://devlibrary.businessobjects.com/BusinessObjectsXI/en/en/BOE_SDK/boesdk_dotNet_doc/doc/boesdk_net_doc/html/Report_Linking13.html
good luck
Amr

How do I get a refnum to multiple open excel instances?

I'm using ActiveX to control interface to Excel2007 from my application (Labview8.5). Unfortunately, if I call Open Automation multiple times with 'create a new instance' set to false, a reference to the same instance of Excel is returned. I would like to get a reference to each open Excel instance. I can use the vi 'Get Task List' then use the vi 'Quit Application' to exit. Problem is if there are changes to be saved then Excel does not exit.
I know I can get all the processes with .NET, but am unsure how to save and exit using .NET.
Thanks in advance for any help.

Hi Rickie!
I looked into how you might save and exit programs using .NET, and was able to find this information on saving files using .NET and I was also able to find this information on manipulating files using .NET commands.
As for ActiveX, you will need to see if you can assign GUID values to each instance of Excel that you have opened. In some instances the GUID value assigned to multiple instances of a program will be the same, so this may not be possible. I would look more into this and get back to us so we can keep working with you on this.
Ben N.
Applications Engineering
Certified LabVIEW Developer

Webi open last instance

Similar Messages

Maybe you are looking for