Webi Page View Not Displaying Page Size Correctly.

Hi Everone,
I have an issue with one report where the page size sttings do not translate when viewed in HTML Page View.
Figure one is the report as seen in the editor - as you can see the page is displayed correctly - A4 Portrait:
And, when the report is viewed in PDF mode - again, no issues:
But when viewed in HTML page view - it blows out the width of the page:
Now this report, as far as I can tell, is set up no differently than 6 others that are designed to be printed as PDF, all of which do not display this behaviour.
We design them to be printed as PDF but present them to the user in HTML Page view in order to allow injected JavaScript’s in the report to be run. This does not happen when you jump directly into PDF mode.
I have checked in design view and I don't have any wayward report elements pushing out the width and the PDF renders correctly which would not happen if there were hidden elements causing issues, it would render a bunch of blank pages.
So, I am at a loss. The page view is correct in edit mode and in PDV view mode but not in HTML page view. Has anyone else had this issue? I can’t work out why this happens only in one report when all the others work properly.
HELP!!!
- Nick

Hi,
I think it may be <div class="html5gallery-viral-0"> (contains the social media buttons) // screencasteu.worldsecuresystems.com/AP/2013-08-01_1033.png
It's the only element that isn't in sync with the other elements on page, when compared to home.html for example.
Kind Regards,
Alex Pavelescu

Similar Messages

  • How to customize my default web page size, i always need to reduce whenever my web page is opened which is cumbersome

    when my web page opens it occupies in full screen and most of the objects getting hidden , hence i have to use the zoom function to reduce or increase the size of the page. instead if i am given an option to open my default size web page and later on my request i can adjust in the view tab it will be quiet helpful. that is in stead of 800x600 i can switch over to much reduced resoultion size and later adjust accordingly. the web page size must in a position to be kept saved, for every time i can open and customize time to time as per my wish.
    hope you get my point!

    The customization role is only used for applying MDS customization. In this role you cannot change your base application outside of MDS. You'll need to select a different role for regular development, including modifying xml documents.

  • Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

    Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

    Try Adobe support, that's not a Firefox support issue. <br />
    http://forums.adobe.com/index.jspa

  • CTS+ Configuration - Web UI is not displaying JAVA transport requests

    Hi,
    After Configure CTS+ in XI landscape.
    Issue 1:  Web UI is not displaying any of the JAVA transport requests
    Issue 2:  The below option is not visible in STMS.
    STMS >> Overview >> "Import Queue Web UI"
    Completed the below settings,
    RFC CTSDEPLOY is working fine.
    I have maintained proxy class and logical port in transaction "LPCONFIG"
    Activated CTS_BROWSER in SICF
    Domain Controller : DEV
    Also, Validate the above configuration and suggest.
    Environment : SAP Net weaver 7.0
    Product : SAP XI Dual stack system.
    Thanks, Ganesh

    Hi
    I believe you may have 2parts UI
    one is server
    another one is
    login
    repository and user name
    Did you connect give correct repository name?
    regards
    Muthu

  • Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly

    After I optimize my pdf I get this error  "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.
    Acrobat X 10.1.10
    I am optimizing to create a smaller lores file to email .

    I am not trying to remove the font.
    I am trying to reduce the size of the file to email.
    After optimizing the file this error pops up.
    I have tried changing the setting for fonts but no success.

  • Cannot extract the embedded font 'F2'. Some characters may not display or print correctly.

    This question was previously published but no answer has been found.
    Error message is :
    "Cannot extract the embedded font 'F2'. Some characters may not display or print correctly."
    Many pdf documents display this error with Adobe Reader 8.1.0. We have errors for embedded fonts 'F0','F3','F7' and so on.
    It looks like a Adobe Reader bug because :
    - All PDF files can be opened with Acrobat Reader 5.0.5, 6.x and 7.x, can't be opened with 8.1.0 version.
    - the 8.1.1 update removes only the bug for 'F0' error message (issue #1572280).
    The solution :
    - to publish a 8.1.2 update to fix this important bug
    - is there a registry parameter or tool option to disable the checking added in 8.x version of Adobe Reader ? The 8.x version catches more errors to be compliant with Adobe specification but Adobe reader must be
    compliant with all documents generated by third party products.
    This Adobe Reader bug applies to Windows Vista, XP Pro SP2, 2000.
    Thx,
    Regards

    Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
    The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
    I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
    Here are the sections I deleted:
    Library/caches/metadata/Microsoft*
    Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
    I did leave the entourage settings though.
    hope it helps someone with a similar issue.

  • Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly.

    I am currently using Adobe Reader version 9.1.3. When I open certain files, it displays the following message, "Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly". Some fonts are actually missing and will not display when printing. I have tried updating adobe but the problem still persists. Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
    Cheers
    RK

    RK7.10.09 wrote:
    Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
    Cheers
    RK
    BUT, does it say "embedded" or "embedded subset" next to the font name. If not, the font isn't included in the file and if you don't have it, it can't display or print it.
    The file creator will need to embed the fonts properly although "some" fonts don't allow embedding. This could be one of them.

  • Error Message:"Cannot find or create the font 'WP-MathA'. Some characters may not display or print correctly."  Who can help me solve this problem?

    Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.”  Who can help me solve this problem?
    Thank you in advance for  your time.
    Marlen

    Hello Anubha,
    I am having a similar problem on my machine.  I was using Word 2008 and I created a PDF inside Word.
    I am opening the file on the system itself and I am running Windows 8.1.  I am using Version 11 of Reader.
    When the PDF I created (my resume) attempts to open, it says:  cannot find or create the file Times, Bold.  Some characters may not display or print correctly. 
    However, the entire Reader keeps freezing and will not allow me to open or test print the document.  Also, it is not displaying any of the Bold Times New Roman Print.  Can you please help?  Thanks.

  • How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

    How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

    You should probalby post your question on Microsoft's own forums for their Mac software since it's their stuff you're asking about:
    http://answers.microsoft.com/en-us/mac

  • After I optimize my pdf I get this error  "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

    After I optimize my pdf I get this error  "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

    This Acrobat forum may be a better place to ask: https://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs

  • Design View Not Displaying Pages with any Formatting

    I asked this question in another thread and somebody locked it.  The question is not answered.  My Design view is not displaying my files with any formatting.  I can view them in a browser, but not in Design view where I can see my work as I'm working.  While I can upload files to the remote server (host provider) the links got screwed up so files on the remote server don't show any formatting either.  Every link, thousands of links, are off by one word (folder) from where my site was residing on my hard drive.  When I try to make a change to the links manually then I can no longer view them with any formatting in my own browser either.
    On my local broswer on my PC the address line reads: http://localhost/folderNameIneedToDelete/filename.php
    On the live website (for my homepage) the address line reads http://websiteName.com/folderNameIneedToDelete/index.html
    (Here is the text from another thread that was improperly locked)
    I just added a remote server to my site so I could begin uploading files to my host provider.  When I saved the setup I saw a message popup about the cache changing.  Now when I try to view a file in Dreamweaver in Design View it doesn't recognize any of the external style sheets.  It displays with no formating.
    I can still view the pages in a browser and they look appropriate, just not in Design View where I can continue working on the site as I've been doing.
    How do I get Design View to display my pages properly again using the .css pages that apply to each page design?
    Thanks,
    Robert

    Murray, thanks for all your assistance.
    Before I edit thousands of links again I want to confirm I've interpreted all your info correctly.  If I setup everything as follows all my pages should work in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and most importantly in a live environment at a host provider:
    Site Setup
    Site - Site Name:  anything including spaces
    Site - Local Site Folder:  C:\wamp\www\rootfoldername\
    Servers - Testing Server (Testing: checked)
    Server Name:  Testing Server
    Connect Using:  Local/Network
    Server Folder:  C:\wamp\www\rootfoldername\
    Web URL:  http://localhost/rootfoldername/
    Remote Server - Maintain synmchronization information:  checked
    Remote Server - Automatically upload files to server on Save:  unchecked
    Remote Server - Enable file check-out:  unchecked
    Testing Server - Server Model:  PHP My SQL
    Version Control - Access:  None
    Advanced Settings - Local Info - Default Images Folder:  C:\wamp\www\rootfoldername\_images\
    Advanced Settings - Local Info - Links relative to:  Document
    Advanced Settings - Local Info - Web URL:  http://sitename.com/
    Advanced Settings - Local Info - Case-sensitive links checking:  unchecked
    Advanced Settings - Local Info - Enable Cache:  checked
    Advanced Settings - Cloaking - Enable Cloaking:  checked
    Cloak files ending with:  unchecked
    Advanced Settings - Design Notes - Maintain Design Notes:  checked
    Advanced Settings - Design Notes - Enable Upload Design Notes for Sharing:  unchecked
    Advanced Settings - File View Columns - Name:  Built In - Show
    Advanced Settings - File View Columns - Notes:  Built In - Hide
    Advanced Settings - File View Columns - Size:  Built In - Show
    Advanced Settings - File View Columns - Type:  Built In - Show
    Advanced Settings - File View Columns - Modified:  Built In - Show
    Advanced Settings - File View Columns - Checked Out By:  Built In - Show
    Advanced Settings - Contribute - Enable Contribute compatibility:  unchecked
    Advanced Settings - Templates - Don't rewrite relative document paths: checked
    Advanced Settings - Spry - Asset Folder:  C:\wamp\www\rootfoldername\SpryAssets\
    Site File Structure - place files in the following folders:
    C:\wamp\www\rootfoldername
    webpages (html & php)
    _images  - [folder] (there are numerous image folders beginning with _images) containing .jpg and .png files
    _includes - [folder] containing attached .php files for the header, navigation and footer attached to every page
    _scripts - [folder] containing .js script files
    _styles - [folder] containing .css files (external style sheets)
    Connections - [folder] contains one php file (databasename.php)
    SpryAssets - [folder] containing system generated .js files .css files and .gif files
    ZendFramework - [folder] - I have no idea if the files in this folder are necesary and why it was placed here many months ago
    ** Links **
    Remove the leading / from every link in every file
    HTML5 shiv
    using an external link will always reflect the latest changes(Question) - If I link to this .js file externally at google instead of linking to a current copy in my _script folder could future changes to this external .js file cause future problems with the webpages that have this file attached?
    Remote Server
    Setup a remote server using the ftp address settings provided by the host provider.  (Question) Any settings defined for the future Remote Server (the first remote server was deleted when problems occured) will not cause any harm to anything involving the Testing Server such as viewing webpages in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and will not cause any harm to any files eventually put to the host provider via that future Remote Server. Is that correct?
    Murray, thanks again for your help,
    Robert

  • I downloaded FF update twice but the web sites are not displayed despite my being on the page. Also rebooted.

    The web pages (tried different web sites) are not being displayed but the line at the bottom of the screen indicates that I am indeed on the web site. Previously, before I downloaded the the nerw version of FF, displaying of the web pages seemed slow unless I ensured by cursor was "off" the space on the screen that shows the web page.
    I have checked with another browser and the web sites I went to are working and are displayed in that browser.

    Could be that you need to clear the cache.
    ''Ctrl+Shift+delete''
    '''Deselect''' info you wish to keep (such as Active logins, site preferences, history, and session)
    Try 4 hours, then today, then try everything.
    Then try reloading the page(s).
    May also try opening your command (run > cmd) prompt and type :
    ipconfig /flushdns
    ipgonfig /renew
    leave space between command and parameter

  • Web Gallery created in Bridge not displaying first picture correctly on a Unix server

    Hi Guys, Am really stumped by a problem that has surfaced after moving from a Windows web hosting server to a Unix hosting platform. The Web Galleries created in both Bridge CS4 and CS6 display and operate as expected on the Windows server. However, having moved to a Unix hosting platform, I observe an odd behavior when going to the Web Gallery page. When the gallery loads, it displays the first image offset. This is always the top left hand quarter of the picture, offset to show in the bottom left hand corner, leaving the top left and right quarters and the bottom left quarter black (I use quarters to best describe the situation, though it really does seem as if the view port of the Gallery is indeed quartered for this first image).
    If I click on the second image in the series, it appears full size. The same happens if I click on the "Play" button. If I return to the first image manually, it displays full size.
    The phenomenon is apparent in Firefox 19.0.2, IE9, Opera and Chrome, all of the latest build.
    Can anyone throw some light on why this phenomenon is occurring and better still, suggest a cure?
    Grateful for all and any help anyone can give.
    Cheers, Daviddhg

    Hi Guys, This turned out to be a Unix server-side issue. Apparently the compression software being used by the ISP on this server was in some way incompatible. The ISP turned the compression off and the problem was cured.
    Cheers, Daviddhg

  • Outlook web login screen not displaying correctly on Exchange 2007 service pack install

    Hello everyone,
    I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly.  The page looks white with some black X's (I think that's where the
    pictures/background images used to be).  We tried to restart the ISS service with no luck.  I would appreciate any help you guys can provide.
    Thanks,
    Brian Kourdou

    Hi,
    I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
    Please try the following steps to solve this issue.
    Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
    Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
    Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
    Remove it with this command
    Remove-OwaVirtualDirectory “owa (Default Web Site)”
    Now create it again with the following command
    New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
    Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Web Page Size Generated by Report

    When I create a report, I have to decide the layout height/width
    before run the report.
    Is it possible to change the layout size programically ?
    In addition, is it possible to show a web page programically ?
    (e.g. if there is some error for the input from parameter form,
    I want to show up a small web page for warning instead of show
    up the default report server warning page)
    Rgds,
    Edward
    null

    http://www.msn.com
    null

Maybe you are looking for